Infotype 0002-field Nickname (P0002-RUFNM) Screen Spain (04) & Mexico (32)

Hi,
There is a requirement in which we have to add the field Nickname (P0002-RUFNM) in the 'Name' subscreen of transaction PA30.
PA30-> Personal Data-> Display/Edit-> 'Name' Subscreen.
This has to be done for two Countries- Spain (Alternative Screen no.: 2004) and Mexico(Alternative Screen no.: 2032).
Please suggest how to add the field Nickname (P0002-RUFNM) to the 'Name' Subscreen of PA30.
Thanks.
Regards.

>
Surya wrote:
> Have you checked the feature P0002 which retrun value given for your countries spain and mexico.
Hi Surya,
I checked the feature P0002 in transaction PE03.
Actually there are 2 entries in V_T588M for Mexico:
Variable Key: 32SD
Alternative Screen: 2000
For this entry, field P0002-RUFNM is available.
Variable Key: 32
Alternative Screen: 2032
For this entry, field P0002-RUFNM is NOT available.
And in PE03 the decision tree suggests:
For Country Mexico,
If User Groupo (USERG) = SD,
       Variable Key = 32SD (which we want, as it has field Nickname (P0002-RUFNM))
Else Variable Key = 32 (which we don't want, as it does not have field Nickname (P0002-RUFNM))
I am new to SAP-HR. Can you please suggest where can I check the values for USERG and ITBLD?
Thanks.
Regrds.

Similar Messages

  • Infotype 0002 field RUFNM known as

    Hello
    On the it0002 the field "known as" (RUFNM) is automatically updated when the field first name (VORNA) is changed.
    I want to deactivate this functionality, in order to the known as different of the first name
    please help this is quite urgent
    regards
    ben

    Please check is there any dynamic action(T588Z) or user exit written for that functionality.
    Regards

  • I want to change the infotype 0002 field position(first name & lasname)

    Dear Freinds,
                 I have requirement where i have to change the positions of the first name and last name , as pe standard we will see is
    the lastname under that field we will se the first name . As per the user he wanted first name and then last name . I have read in sap help that it says the table T522N is the place. But before using i wanted to can i change or is there any method where i can do.
    i have changed the name2 as middle name by going to cmod and changing the text label. Here it dint asked me any access key.
    similary for chaning the position of the two fields can i do so please let me know if any body has done this.
    regards
    divya.

    Hi Divya,
    You can't change the position of the fields in standard SAP screens - PA30/20.
    This would be repair and you need to get access key to change the 2000 screen of module pool MP000200.
    T522N is used to change the name format in reports, etc. (Firstname Lastname or Lastname Firstname) It has nothing to do with the field positions in the screen of PA20/30.
    Regards,
    Dilek

  • SAP HR Infotype 0002 field PERID

    hi
    i am having one issue in it0002 for field PERID for poland.
    when i entered number in this field and press enter this field didnot take that velue.
    any solution
    thanks

    [http://help.sap.com/saphelp_45b/helpdata/en/60/d8bb20576311d189270000e8322f96/content.htm|http://help.sap.com/saphelp_45b/helpdata/en/60/d8bb20576311d189270000e8322f96/content.htm]

  • Upgrade from 4.6C to ECC 6.0 - change text of infotype 0002 screen

    Hello Guru,
    My client is upgrading from 4.6C to ECC 6.0. In 4.6C the field RUFNM text in infotype screen for 0002 is "Know As"  where in ECC 6.0 is now "Nickname". The field is P0002-RUFNM? If I want to change the text in ECC 6.0 from 'Nickname' to "Know As". What is the best option? Modify the screen? or change the Data element? or any better way?
    Thanks

    Hi Bob,
    To change the Field Text, Data Element would be the better option.
    Good Luck
    Om

  • Poland Infotype 0002 - standard screen

    Hi,
    In infotype 0002 there are many standard screens for countries for example Japan has screen 2022. Is there a standard screen for Poland for infotype 0002 or should I use 2000 or 2044?
    Regards,
    Warren.

    you can use one of these 2 or copy into some new screen and use

  • Missing of Gender field in infotype 0002

    Hi All,
    Recently we have upgraded the patch level from 0026 to 0037.  The problem is I am unable to see the Gender field(GESCH)  in Infotype 0002. I have checked in Std screen of P0002 there also i am unable to find the field. But in the database table the field is available.Previously it was available in infotype 2.
    Due to the missing of  standard field Gender (GESCH) in Infotype 0002 I am unable to upload the data and also unable to take the std copies of PF form 5 and form 10 where system is automatically taking the Gender column as F(female) instead of M(Male).As per the standard code it checks this field GESCH for "1" and outputs gender as "M" if "1" and "F" otherwise.
    Any help in this regard will be highly appreciated.
    Regards,
    Anjenaya Prasad

    Hi,
    Activate the field in the table T588M Q0002-GESCH to standard.
    Path: PM->PA->Customizing user interfaces-> Change screen Modifications
    Regards
    Devi

  • Middle name field activation in infotype 0002

    HI all,
    My requirement is to activate middle name field in infotype 0002 screen. Currently in infotype 0002 middle name field is not dsiplayed. The screen number of this list screen is 2000. I checked the infotype screen control in config and found that screen number 2044 has the middle name field. It corresponds to variable key '44'. But currently for country grouping '99', varibale key is set as blank in P0002 feature.
    Now my doubt is, should i  need to copy the screen number 2044 to another screen number and this new screen number need to be assigned against variable key blank in the feature?
    If i copy 2044 to the new screen number, then what abt the settings made in our current screen number 2000.
    Can someone help me in how to bring the middle name witout affecting the current setting in infotype 0002?

    HI ,
    Some of the fields which are available in screen 2000 are not available in screen 2044. So when i copy 2044 and use, then i will get middle name. But the fields available in 2000 will not be displayed i guess.
    Pls tell me how to handle this case.

  • Add new field infotype "z" in logical database selection screen pnp

    Can add new field infotype "z" in logical database selection screen pnp
    I could explain how to realize
    Thanks

    In case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
    u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
    u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
    "Allocation operative area to optional delimiter
      IF NOT p_aroper IS INITIAL.
        DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
              wa_texpr TYPE rsds_expr,
              lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
              wa_rsds_expr_tab LIKE rsdsexpr.
        REFRESH lt_rsds_expr_tab.
        wa_rsds_expr_tab-arity = '0'.
        wa_rsds_expr_tab-fieldname = 'OBJID'.
        wa_rsds_expr_tab-option = 'EQ'.
        wa_rsds_expr_tab-low = p_aroper.
        wa_rsds_expr_tab-high = '00000000'.
        MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
        APPEND lt_rsds_expr_tab.
        REFRESH lt_texpr.
        wa_texpr-tablename = 'PA9004'.
        wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
        MOVE-CORRESPONDING wa_texpr TO lt_texpr.
        APPEND lt_texpr.
      pnpdynse[] = lt_texpr[].
      ENDIF.
    English is the forum language.
    Edited by: Rob Burbank on May 18, 2011 11:41 AM

  • ALE - IDOC  Infotype 0002   additonnal fields...

    hello all
    We have add 2 customers fields in the infotype 0002, and we would like to sent the infotype 2 with these
    2 new fields.
    So we have created an extension which contains a segment with these 2 fields. But  unfortunately
    with the pfal transaction , these 2 fields are not filled by values.
    Has someone have an advice ?
    thank you

    hello  all
    thx for your contribution
    it works  well for a specific message  that we have updated with an extension which include the segment Z1P0002  , but in our case we have a lot specific message . so  we update table Table T777d  in order to include specific segment Z1P0002 ( the 3rd  after E1P0002, E1Q0002 )
    but unfortunately, the fact to update T777d , occurs error for all the message  they are not concerning with this extension.
    Maybe an another way exists ?
    Thx for help by advance.

  • Field: PERID Infotype 0002

    Hi
    I have set up Infotype 0002 for South Africa which accepts the South African numeric ID, i am now setting up for Botswana and in my feature i put the return value to be 16(South Africa). Botswana ID number is Alpha numeric and the field does not accept alpha numeric ID num. How can i get it so that it allows for numeric as well as alpha numeric ID input into field: PERID in Infotype 0002.
    Kind regards

    The field itself will accept characters.  But there is normally a check behind PERID varying  from country to country.  Is there a supported Botswana check that you know of? (Check MP000200). It sounds like you are doing the check for South Africa also for Botswana - and the 2 apparently have different rules for perid. 
    Kirsten

  • Sending the enhanced Infotype 0002 outside SAP via an IDOC

    Hello Friends,
    We have added couple of Z fields to the standard 0002 Iinfotype table PA0002.
    I can see the custom fields in the trans : PA30 screen for infotype 002.
    Now, we want to send these custom fields value outside SAP via an IDOC.
    Here are the steps I followed :
    I created a Z Segment in an extended idoc with the structure PA0002.
    I went in transaction PM01 for Infotype 0002 and added the above created Z segment as a 2nd IDOC segment.
    In transaction PA30 for 002, I made changes to the custom field value for a person 12039.
    Created an idoc via BD21.
    IDOC generated with the Z Segment but it doesn't contain any  Z  custom fields.
    Which step am I missing here? Do I have to have a user-exit or BADI to achieve this OR can it be done without writing any code?
    Basically I
    I will really appreciate your help.
    Regards,
    Pooja Pandey

    Pooja,
    you need to fill each field manually.
    check this code i am filling ZHCMS_PI_SEMENT
    data: sgmnt_e1pityp type e1pityp.
      field-symbols: <wplog> type any.
      field-symbols: <wplog1> type any.
      data: ixxxx type e1pityp, iyyyy type e1plogi,sgmnt_hcms_pi type zhcms_pi_segment,wa_idoc_data_x type edidd, ls_idoc_data type edidd.
      data: lv_p0001 type standard table of p0001 ,lv_p0002 type standard table of p0002 ,lv_p0007 type standard table of p0007 .
      data: lv_p0521 type standard table of p0521 ,lv_p0710 type  standard table of p0710 ,lv_p2001 type  standard table of p2001 .
      data: ls_p0001 type  p0001,ls_p0002 type p0002,ls_p0007 type p0007 ,ls_p0521 type  p0521 ,ls_p0710 type  p0710 ,ls_p2001 type p2001 .
      data: row_index type sy-tabix,del_index type sy-tabix.
      data: lcx_root type ref to cx_root.
    fILL THE E1PITYP
    try.
    Keep the segments which have changed date greater than last run date in update mode
        read table idoc_data into wa_idoc_data_x with  key segnam = 'E1PITYP'.
        assign wa_idoc_data_x-sdata to <wplog> casting type e1pityp.
        ixxxx = <wplog>.
        loop at idoc_data into wa_idoc_data_x where segnam = 'E1PLOGI'.
          row_index = sy-tabix + 1.
          assign wa_idoc_data_x-sdata to <wplog1> casting type e1plogi.
          iyyyy = <wplog1>.
          sgmnt_e1pityp-plvar = ixxxx-plvar.
          sgmnt_e1pityp-otype = ixxxx-otype.
          sgmnt_e1pityp-objid = iyyyy-objid.
          sgmnt_e1pityp-infty = '0001'.
          sgmnt_e1pityp-begda = ixxxx-begda.
          sgmnt_e1pityp-endda = ixxxx-endda.
          clear ls_idoc_data.
          ls_idoc_data-segnam = 'E1PITYP'.
          ls_idoc_data-sdata = sgmnt_e1pityp.
          insert ls_idoc_data into idoc_data index row_index.
    APPEND t_idoc_data .
    Get the ZZSWISSREID
          sort lv_p0001 by begda descending.
          read table lv_p0001 into ls_p0001 index 1.
          sgmnt_hcms_pi-zzswissreid = ls_p0001-zzswissreid.
    Get the custom data from IT0002
          sort lv_p0002 by begda descending.
          read table lv_p0002 into ls_p0002 index 1.
          sgmnt_hcms_pi-zzglobalid = ls_p0002-zzglobalid.
          sgmnt_hcms_pi-zzsource_id = ls_p0002-zzsource_id.
          sgmnt_hcms_pi-zzlegacy_emp_id = ls_p0002-zzlegacy_emp_id.
          ls_idoc_data-segnam = 'ZHCMS_PI_SEGMENT' .
          ls_idoc_data-sdata = sgmnt_hcms_pi.
          row_index = row_index + 1.
          insert ls_idoc_data into idoc_data[] index row_index.
          clear : lv_p2001[] , lv_p0001[] , lv_p0002[] , lv_p0710[] ,lv_p0007[], lv_p0521[], ls_p2001 , ls_p0001 , ls_p0002 , ls_p0710 ,ls_p0007, ls_p0521 .
    APPEND t_idoc_data.
        endloop.
    Thanks
    Bala Duvvuri

  • Infotype 0002 problem

    Hi All,
    I have couple of problems in infotype 0002.
    1. field ANZKD(number of children) is missing in infotype.
    2. marital status key in structure P0002 and in dynamic actions is FAMST but in Infotype marital status key is FATXT.
    I am using country grouping 10 for USA. Is there different screens available? If yes how to change screen.
    We have done no screen exits so far!!
    Thanks in Advance.
    Vivek.

    Hi,
    You should work on view T588M via t-code sm30.
    You can either change screen or control the screen fields there.
    1. ANZKD is alreay there in 2010, just choose the entry to set it to the value other than hide.
    MP000200     2000               10     2010     0
    2. Just go ahead with FAMST, FATXT is the text display on screen. But FAMST stored in database.
    Hope helps,
    Chen Jian

  • Infotype: Japan infotype 0002 update

    Hi Experts,
    Can any one help me in creating/Updating infotype 0002 - Personal Data.
    System is not accepting anything in the field "Katakana:P0002-LNAMK"
    In the screen i am not able to trace what is Kanji, Katakana, Romaji.
    Thanks in advance
    TK

    Thanks for the quick responce Sikindar,
    My requirement is what exactly the fields requirement, i am looking for the process, i want to know the link between 0002 and 0148.
    Thanks your reply it is partly answerd my query.

  • Infotype 0002 for Taiwan

    Hi Expert,
    I am trying to create a new record in infotype 0002 with marital status since equal to future day.
    Then I got the below error:
    "date is less than birth date or great than system current date"
    Could you please let me know how to deactivate this checking?
    Million thanks,
    WF

    Hi William,
    This message is not tied to a configuration step.
    The message is popped up as follows:
    SE51 - Screen maintenance.
    Module pool: MP000200
    Screen : 2042
    Flow logic: FIELD P0002-FAMDT MODULE CACL_FAMTW_FROM_FAMDT ON REQUEST.
    Double click MODULE CACL_FAMTW_FROM_FAMDT - Double click perform MODULE CACL_FAMTW_FROM_FAMDT .
    There go to the following line:
    IF P0002-FAMDT LT LOW_DATE .....
    MESSAGE E096(30).
    ENDIF.
    Message 096 belonging to message class 30 is that specific message.
    The only thing that comes to my mind is to copy screen 2042 to your own screen and change thins coding accordingly.
    Regards,
    Dilek

Maybe you are looking for