Infotype 0002 field RUFNM known as

Hello
On the it0002 the field "known as" (RUFNM) is automatically updated when the field first name (VORNA) is changed.
I want to deactivate this functionality, in order to the known as different of the first name
please help this is quite urgent
regards
ben

Please check is there any dynamic action(T588Z) or user exit written for that functionality.
Regards

Similar Messages

  • Infotype 0002-field Nickname (P0002-RUFNM) Screen Spain (04) & Mexico (32)

    Hi,
    There is a requirement in which we have to add the field Nickname (P0002-RUFNM) in the 'Name' subscreen of transaction PA30.
    PA30-> Personal Data-> Display/Edit-> 'Name' Subscreen.
    This has to be done for two Countries- Spain (Alternative Screen no.: 2004) and Mexico(Alternative Screen no.: 2032).
    Please suggest how to add the field Nickname (P0002-RUFNM) to the 'Name' Subscreen of PA30.
    Thanks.
    Regards.

    >
    Surya wrote:
    > Have you checked the feature P0002 which retrun value given for your countries spain and mexico.
    Hi Surya,
    I checked the feature P0002 in transaction PE03.
    Actually there are 2 entries in V_T588M for Mexico:
    Variable Key: 32SD
    Alternative Screen: 2000
    For this entry, field P0002-RUFNM is available.
    Variable Key: 32
    Alternative Screen: 2032
    For this entry, field P0002-RUFNM is NOT available.
    And in PE03 the decision tree suggests:
    For Country Mexico,
    If User Groupo (USERG) = SD,
           Variable Key = 32SD (which we want, as it has field Nickname (P0002-RUFNM))
    Else Variable Key = 32 (which we don't want, as it does not have field Nickname (P0002-RUFNM))
    I am new to SAP-HR. Can you please suggest where can I check the values for USERG and ITBLD?
    Thanks.
    Regrds.

  • I want to change the infotype 0002 field position(first name & lasname)

    Dear Freinds,
                 I have requirement where i have to change the positions of the first name and last name , as pe standard we will see is
    the lastname under that field we will se the first name . As per the user he wanted first name and then last name . I have read in sap help that it says the table T522N is the place. But before using i wanted to can i change or is there any method where i can do.
    i have changed the name2 as middle name by going to cmod and changing the text label. Here it dint asked me any access key.
    similary for chaning the position of the two fields can i do so please let me know if any body has done this.
    regards
    divya.

    Hi Divya,
    You can't change the position of the fields in standard SAP screens - PA30/20.
    This would be repair and you need to get access key to change the 2000 screen of module pool MP000200.
    T522N is used to change the name format in reports, etc. (Firstname Lastname or Lastname Firstname) It has nothing to do with the field positions in the screen of PA20/30.
    Regards,
    Dilek

  • SAP HR Infotype 0002 field PERID

    hi
    i am having one issue in it0002 for field PERID for poland.
    when i entered number in this field and press enter this field didnot take that velue.
    any solution
    thanks

    [http://help.sap.com/saphelp_45b/helpdata/en/60/d8bb20576311d189270000e8322f96/content.htm|http://help.sap.com/saphelp_45b/helpdata/en/60/d8bb20576311d189270000e8322f96/content.htm]

  • Missing of Gender field in infotype 0002

    Hi All,
    Recently we have upgraded the patch level from 0026 to 0037.  The problem is I am unable to see the Gender field(GESCH)  in Infotype 0002. I have checked in Std screen of P0002 there also i am unable to find the field. But in the database table the field is available.Previously it was available in infotype 2.
    Due to the missing of  standard field Gender (GESCH) in Infotype 0002 I am unable to upload the data and also unable to take the std copies of PF form 5 and form 10 where system is automatically taking the Gender column as F(female) instead of M(Male).As per the standard code it checks this field GESCH for "1" and outputs gender as "M" if "1" and "F" otherwise.
    Any help in this regard will be highly appreciated.
    Regards,
    Anjenaya Prasad

    Hi,
    Activate the field in the table T588M Q0002-GESCH to standard.
    Path: PM->PA->Customizing user interfaces-> Change screen Modifications
    Regards
    Devi

  • ALE - IDOC  Infotype 0002   additonnal fields...

    hello all
    We have add 2 customers fields in the infotype 0002, and we would like to sent the infotype 2 with these
    2 new fields.
    So we have created an extension which contains a segment with these 2 fields. But  unfortunately
    with the pfal transaction , these 2 fields are not filled by values.
    Has someone have an advice ?
    thank you

    hello  all
    thx for your contribution
    it works  well for a specific message  that we have updated with an extension which include the segment Z1P0002  , but in our case we have a lot specific message . so  we update table Table T777d  in order to include specific segment Z1P0002 ( the 3rd  after E1P0002, E1Q0002 )
    but unfortunately, the fact to update T777d , occurs error for all the message  they are not concerning with this extension.
    Maybe an another way exists ?
    Thx for help by advance.

  • Field: PERID Infotype 0002

    Hi
    I have set up Infotype 0002 for South Africa which accepts the South African numeric ID, i am now setting up for Botswana and in my feature i put the return value to be 16(South Africa). Botswana ID number is Alpha numeric and the field does not accept alpha numeric ID num. How can i get it so that it allows for numeric as well as alpha numeric ID input into field: PERID in Infotype 0002.
    Kind regards

    The field itself will accept characters.  But there is normally a check behind PERID varying  from country to country.  Is there a supported Botswana check that you know of? (Check MP000200). It sounds like you are doing the check for South Africa also for Botswana - and the 2 apparently have different rules for perid. 
    Kirsten

  • Middle name field activation in infotype 0002

    HI all,
    My requirement is to activate middle name field in infotype 0002 screen. Currently in infotype 0002 middle name field is not dsiplayed. The screen number of this list screen is 2000. I checked the infotype screen control in config and found that screen number 2044 has the middle name field. It corresponds to variable key '44'. But currently for country grouping '99', varibale key is set as blank in P0002 feature.
    Now my doubt is, should i  need to copy the screen number 2044 to another screen number and this new screen number need to be assigned against variable key blank in the feature?
    If i copy 2044 to the new screen number, then what abt the settings made in our current screen number 2000.
    Can someone help me in how to bring the middle name witout affecting the current setting in infotype 0002?

    HI ,
    Some of the fields which are available in screen 2000 are not available in screen 2044. So when i copy 2044 and use, then i will get middle name. But the fields available in 2000 will not be displayed i guess.
    Pls tell me how to handle this case.

  • Upgrade from 4.6C to ECC 6.0 - change text of infotype 0002 screen

    Hello Guru,
    My client is upgrading from 4.6C to ECC 6.0. In 4.6C the field RUFNM text in infotype screen for 0002 is "Know As"  where in ECC 6.0 is now "Nickname". The field is P0002-RUFNM? If I want to change the text in ECC 6.0 from 'Nickname' to "Know As". What is the best option? Modify the screen? or change the Data element? or any better way?
    Thanks

    Hi Bob,
    To change the Field Text, Data Element would be the better option.
    Good Luck
    Om

  • Enhanced Infotype (IT0002) field in HRMD_A07 IDoc

    Hi All,
    I have enhanced SAP standard infotype 0002 (via PM01) to include one new field(NWFLD1). The infotype functions perfectly well with the new field(NWFLD1).
    I would now like to see this new field in the IDoc that is generated via change pointers. At present the IDoc (HRMD_A07) does not reflect the new field.
    [I guess I'd need to incorporate this new field in an IDoc segment and then assign this new segment in the Tech. attributes for IT0002 and maybe also use some BADI/UserExit to transfer the values].
    What steps do I need to take to achieve this?
    Many Thanks in Advance.
    Sanjay
    PS: I have no problems with custom infotypes which work almost 'out of the box' when I create a new IDoc Segment and specify that as the 1st IDoc segment in the Tech. attributes for the custom IDoc via PM01.

    Hello Sanjay,
    I have a similar issue as of yours.
    I had to add 2 custom fields to the standard IT0002.
    I have created a new segment and attached to the extension and maitained the same in T777D.
    But as of now no data is getting populated for that new segment.
    I guess I also have to do some develoment but not sure where and how?
    Thanks in advance for the answer.
    Naveen.

  • Employee photo upload in portal and to be saved in infotype 0002

    Hi Everyone,
           I got an requirement where in ESS Portal, through "Change Own Data" link, employee is uploading his photo and it has to be saved in infotype 0002. Below are the doubts i have,
    1. There is no field for photo in infotype 0002, so how it will be saved in 0002.
    2. After uploading and clicking preview button, error was raising saying 'Error when archiving the photo'.
    3. I seen in many forums that the employee photo is visible from PA30. how it will be visible in that tcode ?

    Hi  Chris McNarney,
          Sorry for long delay for replying.. According to you,
    1. I checked the service under /default_host/sap/bc/conentserver/ it was activated and moreover below is the logon data,
            Client           500
         User             XXXXXX
         Language
         Password Status  Set
    and what is the use of this logon data..
    2. According to your link [https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false|https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false],
    there it has  4.7 version in that they told to create A2 repository with Tcode: OAC0 with details,,
         While creating the repository, keep the Document Area blank, Storage type as R/3 database, Rep. Sub-type will appear as Normal by default, Version No. as 0046 and in Contents table put 'SDOKCONT1' as the table name.
        With that screen im am not able to find table name field to put 'SDOKCONT1' as input and moreover SAP system database is there instead of getting R/3 database for storage type. Screen detilas below,
    Content Rep.    A2                               Active
    Description
    Document Area
    Storage type
    Version no.     0046   Content Server version 4.6 as the table name.

  • Infotype 0002 issue

    hi,
    i have added one field in infotype 0002 , by pm01 . it is not getting displayed in pa30 transaction . i have already activate module pool  and layout editor plz tell me what to do .

    Please check the screen number of the module pool. In which screen you have added the new field? Is the same scrren is being used by PA30 screen. I am sure there is some mismatch in screen.
    Regards,
    Sandip

  • Sending the enhanced Infotype 0002 outside SAP via an IDOC

    Hello Friends,
    We have added couple of Z fields to the standard 0002 Iinfotype table PA0002.
    I can see the custom fields in the trans : PA30 screen for infotype 002.
    Now, we want to send these custom fields value outside SAP via an IDOC.
    Here are the steps I followed :
    I created a Z Segment in an extended idoc with the structure PA0002.
    I went in transaction PM01 for Infotype 0002 and added the above created Z segment as a 2nd IDOC segment.
    In transaction PA30 for 002, I made changes to the custom field value for a person 12039.
    Created an idoc via BD21.
    IDOC generated with the Z Segment but it doesn't contain any  Z  custom fields.
    Which step am I missing here? Do I have to have a user-exit or BADI to achieve this OR can it be done without writing any code?
    Basically I
    I will really appreciate your help.
    Regards,
    Pooja Pandey

    Pooja,
    you need to fill each field manually.
    check this code i am filling ZHCMS_PI_SEMENT
    data: sgmnt_e1pityp type e1pityp.
      field-symbols: <wplog> type any.
      field-symbols: <wplog1> type any.
      data: ixxxx type e1pityp, iyyyy type e1plogi,sgmnt_hcms_pi type zhcms_pi_segment,wa_idoc_data_x type edidd, ls_idoc_data type edidd.
      data: lv_p0001 type standard table of p0001 ,lv_p0002 type standard table of p0002 ,lv_p0007 type standard table of p0007 .
      data: lv_p0521 type standard table of p0521 ,lv_p0710 type  standard table of p0710 ,lv_p2001 type  standard table of p2001 .
      data: ls_p0001 type  p0001,ls_p0002 type p0002,ls_p0007 type p0007 ,ls_p0521 type  p0521 ,ls_p0710 type  p0710 ,ls_p2001 type p2001 .
      data: row_index type sy-tabix,del_index type sy-tabix.
      data: lcx_root type ref to cx_root.
    fILL THE E1PITYP
    try.
    Keep the segments which have changed date greater than last run date in update mode
        read table idoc_data into wa_idoc_data_x with  key segnam = 'E1PITYP'.
        assign wa_idoc_data_x-sdata to <wplog> casting type e1pityp.
        ixxxx = <wplog>.
        loop at idoc_data into wa_idoc_data_x where segnam = 'E1PLOGI'.
          row_index = sy-tabix + 1.
          assign wa_idoc_data_x-sdata to <wplog1> casting type e1plogi.
          iyyyy = <wplog1>.
          sgmnt_e1pityp-plvar = ixxxx-plvar.
          sgmnt_e1pityp-otype = ixxxx-otype.
          sgmnt_e1pityp-objid = iyyyy-objid.
          sgmnt_e1pityp-infty = '0001'.
          sgmnt_e1pityp-begda = ixxxx-begda.
          sgmnt_e1pityp-endda = ixxxx-endda.
          clear ls_idoc_data.
          ls_idoc_data-segnam = 'E1PITYP'.
          ls_idoc_data-sdata = sgmnt_e1pityp.
          insert ls_idoc_data into idoc_data index row_index.
    APPEND t_idoc_data .
    Get the ZZSWISSREID
          sort lv_p0001 by begda descending.
          read table lv_p0001 into ls_p0001 index 1.
          sgmnt_hcms_pi-zzswissreid = ls_p0001-zzswissreid.
    Get the custom data from IT0002
          sort lv_p0002 by begda descending.
          read table lv_p0002 into ls_p0002 index 1.
          sgmnt_hcms_pi-zzglobalid = ls_p0002-zzglobalid.
          sgmnt_hcms_pi-zzsource_id = ls_p0002-zzsource_id.
          sgmnt_hcms_pi-zzlegacy_emp_id = ls_p0002-zzlegacy_emp_id.
          ls_idoc_data-segnam = 'ZHCMS_PI_SEGMENT' .
          ls_idoc_data-sdata = sgmnt_hcms_pi.
          row_index = row_index + 1.
          insert ls_idoc_data into idoc_data[] index row_index.
          clear : lv_p2001[] , lv_p0001[] , lv_p0002[] , lv_p0710[] ,lv_p0007[], lv_p0521[], ls_p2001 , ls_p0001 , ls_p0002 , ls_p0710 ,ls_p0007, ls_p0521 .
    APPEND t_idoc_data.
        endloop.
    Thanks
    Bala Duvvuri

  • Iam getting any error in infotype 0002 while doing enhancement ...

    Dear all
                could any one let me know why iam getting this error ,
       " TABL HRTIM00WS_PWS_INFTIES was adjusted
      Check table HRTIM00WS_PWS_INFTIES (SFCD07/13.06.07/11:34)
      Enhancement category for table missing
      Enhancement category for include or subtype missing
      Field name TIME is reserved (Do not use structure as include in DB table)
      Table HRTIM00WS_PWS_INFTIES was checked with warningsif iam doing
    enhancement for infotype 0002 ....
    i have just added an one custom field ...(zzname , data element is zzname type char 20)as per the business requirement.
    regards
    vamsi

    Iam getting any error in infotype 0002 while doing enhancement .
    " TABL HRTIM00WS_PWS_INFTIES was adjusted
    Check table HRTIM00WS_PWS_INFTIES (SFCD07/13.06.07/11:34)
    Enhancement category for table missing
    Enhancement category for include or subtype missing
    Field name TIME is reserved (Do not use structure as include in DB table)
    Table HRTIM00WS_PWS_INFTIES was checked with warningsif iam doing
    enhancement for infotype 0002 ....
    when iam activating .................the structure i got the above error...........please urgent i have just added only one field

  • Infotype 0002 Amendment

    How do everyone
    We have just created a new client 333 on our dev machine. We are currently
    using the existing 010 client.
    When I look at infotype 0002 via PA20 on the new client 333 I can see that
    there are certain customised ZZ fields missing.
    I created a dummy transport in 010 to include the table definition CI_P0002,
    the report source code and the screen.
    I then imported this transport via SCC1 into the new client 333.
    It ran successfully, but the fields are still missing from PA20.
    Does anybody know if I am doing anything wrong????
    Cheers
    Andy

    Hi again,
    1. The procedure is a little tricky.
    2. To confirm, just goto se09, and check your request objects.
       The MP000200 entries must be there.
      (If the procecudure was done 100% correct)
    3. Just make sure, in PM01,
        u press the BUTTON in app toolbar
       "INCLUDE IN REQUEST"
        and then save button.
       (Only when we do this step, the etnries get included in request)
    regards,
    amit m.

Maybe you are looking for