Infotype 0002 Personal details

Hi Experts,
Currently I am using STD IT0002 the problem is in this Infotype there is no any field for Middle name. I have tried to configure it but anable to search any screen like this for India. can any one please guide me to solve this.
Regards
Swapnil

Hi
I believe you want to use the middle name where it not necessary as per SAP best practices.
Since you din't mentioned for country you are working for.
These screens designed as per countries requirement.
If you want Middle Name in your screen
Use Tcode SM30
For example  Select Module Pool   MP000200
                               variable  Key 10
                               Screen 2010
Copy to you screen.
Assign you new screen in P0002 feature
Warm Regards

Similar Messages

  • Start date personnel number infotype 0002 (Personal data)

    Hi gurus,
    I have the following problem in SAP ECC6.
    I created a personnel number with transaction PA40 with start date 200208.
    In infotype 0002 (Personal data), after that I have filled various field, if I save, the start date changes from 200208 to 01011900.
    Could you help me please?
    Thanks in advance
    Regards
    Raffaele

    Hi
    Adding to what Mr. Sai Naraynan has said.
    See whatever happening at your end is absolutley correct you have to understand the logic behind that.
    See Personal data infotype will contain the master data of an employee like name, ***, complete name, form of address etc... whuich is same from his birth so there is no need to have a validity starting from the date of hiring because this data is same from his birth thats why system automatically stamps a Birth date out there.
    Hope it clarifies your doubt.
    Regards,
    Bhupesh Wankar

  • IDOC HRMD_A for Infotype 0002 (Personal Data)

    Hello,
    I'm trying to send the modifications that I make in a person in the transaction PA30 in the table PA0002 automaticly. But when I go to thew program "RBDMIDOC" and select the message type "HRMD_A" (HR: Plan data and HR master data) it says that it doesn't have anything to send. But when I modify a Object (o, c, s), and I execute the program it send information. The object(o,c,s) has sent correctly. But when I want to send the Personal Data (P), it doesn't send anything. I have the trigger activated.
    Have I selected the message type correctly?
    PM

    updating id for malasian employee is not working.
    Q0002-perid. it come only for malasian employee.
    screen no 2044
    Use transaction PA30,
    Enter infotype number 2 or select Personal Data (0002) on the Personal Data tab
    You can use any Malaysian employee #
    Click on change button
    Enter in an ID number.  (There is no validation on ID number field.)
    Click either the enter or save button.  The ID number disappears and a message says ‘No change found’.

  • Infotype 0002: Exception INTERNAL_ERROR after saving

    Hi All
    This error we are getting when we Applied Service package 18. 
    within a hiring action, after you save infotype 0002 ("Personal Data"), the exception INTERNAL_ERROR occurs with the runtime error RAISE_EXCEPTION.
    The exception is triggered in the method CHECK_AUTHORIZATION in the class CL_HRPAD00AUTH_CHECK_STD.
    So if any body is getting this error then please Apply this SAP Note 1366651 which is released By SAP on 20 July 2009.
    Thanks & Regards
    Gaurav Mittal
    Technical Consultant - SAP HR
    Edited by: Gaurav Mittal on Jul 21, 2009 3:13 AM

    What are the logs saying? You will most likely have a bit of code that is incorrect.
    Log into the Coldfusion administrator and have a look at application.log or coldfusion-out.log. It should tell you what the error is and possibly the line number.

  • Region in Infotype 0002

    Hi Gurus
    This is regarding infotype 0002 (personal data) while implementing for india country grouping 40 is given in the parameter (su01).Eventhough when hiring a person US related Region is coming in the dropdown list in personal data update
    any one can give me a guidance to face this challange
    with regards
    partha

    hi
    Got the answer byself
    Thanks and regards
    partha

  • Infotype: Japan infotype 0002 update

    Hi Experts,
    Can any one help me in creating/Updating infotype 0002 - Personal Data.
    System is not accepting anything in the field "Katakana:P0002-LNAMK"
    In the screen i am not able to trace what is Kanji, Katakana, Romaji.
    Thanks in advance
    TK

    Thanks for the quick responce Sikindar,
    My requirement is what exactly the fields requirement, i am looking for the process, i want to know the link between 0002 and 0148.
    Thanks your reply it is partly answerd my query.

  • ABAP-HR  - Regarding wrong updation of Employee personal details

    Dear All,
        Two different Employee Codes with same Name ,when any personal details are changed for  1 of this Employee code ,the changes are Updated in both Employee codes.Kindly suggest any solution for this.
    Eg : In Screen PA30.
    1.    Pers.No.: 10437
           First name : MANJU.M
    2.    Pers.No.: 5748
           First name : MANJU.M
    Suppose I am changing the  ' Start : 19.12.1975 '  for  Employee Code : 10437   ,the same changes are appearing for 5748.
    Kindly suggest if any customization  is required,if how can i do .

    Hi,
    where could i check these User exits.And please read below.
      The Reference Personnel No is maintained for these both Employee code  through Infotype -0031,if i remove this Reference no it is not updating the other Employee code with same name .
    In table maintenance V_T582A in change mode i checked the corresponding 0031infotype there 'Copy Infotype' attribute is in disable mode.And for infotype -0002 'Copy Infotype' attribute is checked.Now My doubt is whether this reference personnel no is automatically generated for same name or is mainitained manually.And if it is automatically generated ,individually i have to remove or i can restrict this automatically generated Ref.personnel no.
    Kindly suggest me what i have to do .
    With thanks,
    Dina.

  • How to handle the personal details ( Rejoin the organization )

    Hi All
    I need to update the personal details in HR Master (only rejoin ).
    Any FM or BAPI to update the Personal deta details into HR Master ( Only Rejoin).
    please specify the infotype and transacation code to update the personal details in HR Master ( Only Rejoin).
    Thanks & Regards
    K.Gunasekar.

    For Re-Entry of an employee, you have to perform 'Re-Entry into Company' Personnel Action in PA40. The Personal Information Infotype 0002 will come as per the sequence defined in the infogroup T588D.
    Anyhow, most of the employee details already would have been available in the system. Then why do you need to update the Personal Information?
    Regards
    N  Navaneethan

  • Calling infotype 0002 in ALV  report for showing employee photo

    Hi all,
    The requirment from business side is a report in which employees personal data shuold be shown with employee photo, I had tried for employee photo in ALV report but it didnt sucessed, then I went for other solution like calling transaction in ALV report.
    In this case I am calling Infotype 0002 but the issue is that the transaction PA20 is coming with PERNR but I am not able to go directlly to infotype which shows employee Photo,please suggest any solution.
    Thaks.
    JAY

    Hi Jay,
    It is possible. Please refer the syntax for the CALL TRANSACTION
    CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
                        | [USING bdc_tab [bdc_options]] }.
    You can do a recording till the required page comes & call the transaction accordingly. Hope, you are aware about the same.
    For example, I just had a solution to go to the roles tab in the user profile and I did as below:
        CLEAR wa_bdcdata.
        wa_bdcdata-program  = 'SAPLSUU5'.
        wa_bdcdata-dynpro   = '0050'.
        wa_bdcdata-dynbegin = k_ok.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'BDC_CURSOR'.
        wa_bdcdata-fval   = 'USR02-BNAME'.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'USR02-BNAME'.
        wa_bdcdata-fval   = g_value.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'BDC_OKCODE'.
        wa_bdcdata-fval   = 'SHOW'.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-program  = 'SAPLSUU5'.
        wa_bdcdata-dynpro   = '0100'.
        wa_bdcdata-dynbegin = k_ok.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'BDC_OKCODE'.
        wa_bdcdata-fval   = '=ACTG'.
        APPEND wa_bdcdata TO it_bdcdata.
        g_opt-dismode = 'E'.
        g_opt-defsize = k_ok.
    *** if user click on the User Name, call SU01
        CALL TRANSACTION 'SU01' USING it_bdcdata
                    OPTIONS FROM g_opt.
    Regards,
    Selva K.

  • Employee photo upload in portal and to be saved in infotype 0002

    Hi Everyone,
           I got an requirement where in ESS Portal, through "Change Own Data" link, employee is uploading his photo and it has to be saved in infotype 0002. Below are the doubts i have,
    1. There is no field for photo in infotype 0002, so how it will be saved in 0002.
    2. After uploading and clicking preview button, error was raising saying 'Error when archiving the photo'.
    3. I seen in many forums that the employee photo is visible from PA30. how it will be visible in that tcode ?

    Hi  Chris McNarney,
          Sorry for long delay for replying.. According to you,
    1. I checked the service under /default_host/sap/bc/conentserver/ it was activated and moreover below is the logon data,
            Client           500
         User             XXXXXX
         Language
         Password Status  Set
    and what is the use of this logon data..
    2. According to your link [https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false|https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false],
    there it has  4.7 version in that they told to create A2 repository with Tcode: OAC0 with details,,
         While creating the repository, keep the Document Area blank, Storage type as R/3 database, Rep. Sub-type will appear as Normal by default, Version No. as 0046 and in Contents table put 'SDOKCONT1' as the table name.
        With that screen im am not able to find table name field to put 'SDOKCONT1' as input and moreover SAP system database is there instead of getting R/3 database for storage type. Screen detilas below,
    Content Rep.    A2                               Active
    Description
    Document Area
    Storage type
    Version no.     0046   Content Server version 4.6 as the table name.

  • Report / FM-To create/update email address from Personal detail infotype105

    Hi All
    Any standard report or FM is available to update the SU01 email id by using personal details PA30 infotype 105 email ID.
    Regards
    K.Gunasekar

    Hi,
    The FM BAPI_USER_CHANGE can be used to change the email id in SU01.
    If you are looking for a method to bulk upload email address of users in SU01, you can write a BDC or LSMW to do the same. You can even write a custom FM using the FM BAPI_USER_CHANGE for bulk upload of email id in SU01.
    Regards,
    Shayeree.

  • Sending the enhanced Infotype 0002 outside SAP via an IDOC

    Hello Friends,
    We have added couple of Z fields to the standard 0002 Iinfotype table PA0002.
    I can see the custom fields in the trans : PA30 screen for infotype 002.
    Now, we want to send these custom fields value outside SAP via an IDOC.
    Here are the steps I followed :
    I created a Z Segment in an extended idoc with the structure PA0002.
    I went in transaction PM01 for Infotype 0002 and added the above created Z segment as a 2nd IDOC segment.
    In transaction PA30 for 002, I made changes to the custom field value for a person 12039.
    Created an idoc via BD21.
    IDOC generated with the Z Segment but it doesn't contain any  Z  custom fields.
    Which step am I missing here? Do I have to have a user-exit or BADI to achieve this OR can it be done without writing any code?
    Basically I
    I will really appreciate your help.
    Regards,
    Pooja Pandey

    Pooja,
    you need to fill each field manually.
    check this code i am filling ZHCMS_PI_SEMENT
    data: sgmnt_e1pityp type e1pityp.
      field-symbols: <wplog> type any.
      field-symbols: <wplog1> type any.
      data: ixxxx type e1pityp, iyyyy type e1plogi,sgmnt_hcms_pi type zhcms_pi_segment,wa_idoc_data_x type edidd, ls_idoc_data type edidd.
      data: lv_p0001 type standard table of p0001 ,lv_p0002 type standard table of p0002 ,lv_p0007 type standard table of p0007 .
      data: lv_p0521 type standard table of p0521 ,lv_p0710 type  standard table of p0710 ,lv_p2001 type  standard table of p2001 .
      data: ls_p0001 type  p0001,ls_p0002 type p0002,ls_p0007 type p0007 ,ls_p0521 type  p0521 ,ls_p0710 type  p0710 ,ls_p2001 type p2001 .
      data: row_index type sy-tabix,del_index type sy-tabix.
      data: lcx_root type ref to cx_root.
    fILL THE E1PITYP
    try.
    Keep the segments which have changed date greater than last run date in update mode
        read table idoc_data into wa_idoc_data_x with  key segnam = 'E1PITYP'.
        assign wa_idoc_data_x-sdata to <wplog> casting type e1pityp.
        ixxxx = <wplog>.
        loop at idoc_data into wa_idoc_data_x where segnam = 'E1PLOGI'.
          row_index = sy-tabix + 1.
          assign wa_idoc_data_x-sdata to <wplog1> casting type e1plogi.
          iyyyy = <wplog1>.
          sgmnt_e1pityp-plvar = ixxxx-plvar.
          sgmnt_e1pityp-otype = ixxxx-otype.
          sgmnt_e1pityp-objid = iyyyy-objid.
          sgmnt_e1pityp-infty = '0001'.
          sgmnt_e1pityp-begda = ixxxx-begda.
          sgmnt_e1pityp-endda = ixxxx-endda.
          clear ls_idoc_data.
          ls_idoc_data-segnam = 'E1PITYP'.
          ls_idoc_data-sdata = sgmnt_e1pityp.
          insert ls_idoc_data into idoc_data index row_index.
    APPEND t_idoc_data .
    Get the ZZSWISSREID
          sort lv_p0001 by begda descending.
          read table lv_p0001 into ls_p0001 index 1.
          sgmnt_hcms_pi-zzswissreid = ls_p0001-zzswissreid.
    Get the custom data from IT0002
          sort lv_p0002 by begda descending.
          read table lv_p0002 into ls_p0002 index 1.
          sgmnt_hcms_pi-zzglobalid = ls_p0002-zzglobalid.
          sgmnt_hcms_pi-zzsource_id = ls_p0002-zzsource_id.
          sgmnt_hcms_pi-zzlegacy_emp_id = ls_p0002-zzlegacy_emp_id.
          ls_idoc_data-segnam = 'ZHCMS_PI_SEGMENT' .
          ls_idoc_data-sdata = sgmnt_hcms_pi.
          row_index = row_index + 1.
          insert ls_idoc_data into idoc_data[] index row_index.
          clear : lv_p2001[] , lv_p0001[] , lv_p0002[] , lv_p0710[] ,lv_p0007[], lv_p0521[], ls_p2001 , ls_p0001 , ls_p0002 , ls_p0710 ,ls_p0007, ls_p0521 .
    APPEND t_idoc_data.
        endloop.
    Thanks
    Bala Duvvuri

  • PA30 ( Infotype 0002)

    hi,SAP SIRS,
    Pls     do    find   the  solution  for   changing text   "Birth Name" into    "Middle Name"   in infotype   0002   in   PA30.
    helpme .com
    saty

    Hi Sati ,
    Their Is Two Ways To Do IT.
    1st Method.
    Go For T588M Table
    Or
    Go To VIew V_T588M
    Or
    In IMG
    U Go For
    Personal Management,
    ->Personal Adminstration,
    ->Customizing User Interfaces,
    ->Change Screen Modifications,
    Select MP000200 And The Coreesponding Screen Number
    Change The Field Last Name By Birth Name.
    2nd Method.
    Go To Tcode PM01
    And Your Infotype.
    Screen (Correponding Screen Number)
    In The Layout Editor
    Using Access Key
    Change the Text Last_name__ By Birth_name.
    Generate All Objects.
    Thanks & Regards,
    Shiva vs.
    Thanks & Regards,
    Shiva vs.

  • Infotype 0002 persional ID not updating

    I need to update persional ID.
    i Used transaction PA30,
    Enter infotype number 2 or select Personal Data (0002) on the Personal Data tab
    You can use any <b>Malaysian</b> employee #
    Click on change button
    Enter in an ID number.
    Click either the enter or save button.  The ID number disappears and a message says ‘No change found’.
    help me regarding this.

    Hi vijayan,
    1.   Enter in an ID number.
    2. Which field are u talking about in infotype 0002.
      ( i could not find such field)
    regards,
    amit m.

  • After offer release, employee has to fill personal details through URL-E-recruitment

    Dear All,
    Client is Indian,
    After Offer release through e-recruitment.
    HR want to send URL mail to selected candidate.
    Through this URL candidate has to fill all personal details(Family details, IT Declarations, Blood group etc.)
    How to store this data in R/3.
    According mine.
    We create custom IT in e-recruitment.
    So we can capture all the data here. After PA48 it can transfer to PA Infotypes.
    Regards
    Somu

    Hi Somu,
    You have to include them in the transport methods from E-Rec to HR. We use here FM   HR_PREPARE_NEW_EE and this is limited to certain infotypes.
    Regards,
    Nicole

Maybe you are looking for