Infotype 0007 fileds in configuring Benefits ?

Hi HR gurus,
Can you please let me know if the fileds form infotype 0007 (Planned working time) are used in configuration of the Benefits application of payroll .
Thanks in advance, Swapnil Mishra

Dear Swapnil Mishra,
That will actually be up to you and the way you have configured the benefit module. It is possible in configuration, in particular for everything that concern employee elligibility to configure it using time data
Like for example in feature EECGR Employee Contribution Grouping one of the valid decision field is WOSTD Hours per week which is an IT0007 field.
Thus if you do not want to use time data then check your plan configuration and make sure eligibility does not use these fields.
Hope this help
Sarah

Similar Messages

Configuration of Infotype 0007

Hi,
Can some one help me with the configuration steps of Infotype 0007, Planned working time.
Regards,
Kalyani

Hi!!
SPRO->Time management->Work schedules->Define public holiday classes....first of all you should configue your holiday calendar..U can do it here...or either by transaction SCAL..create the holidays with using diff. types of holidays. Then assing the public holidays to holiday calendar.
FOR infotype 7...
Group Personnel Subareas for the Work Schedule Table : V_001P_N
Group Personnel Subareas for the Daily Work Schedule: Table T508Z
Daily Work Schedules:
Define break schedule: Determine break schedule: V_T550P
Define rules for variant: If you have any holidays before of public holiday. table: V_T550X
Define daily work schedule Table: T550A
Define period work schedule: Table: T551A
Day types:
Define the selection rules: Here define the day types on which day you are paying to the employee. table: T553A
Define the special days: Define special holidays here. Company establish date: Table T553S
Work schedule rules and work schedues-> define emp subgroup groupings -> Define Groupings for the Public Holiday Calendar: Table : V_001P_M
Set work schedule rules and work schedules Table: V_T508A
Generate work schedules manually... here you can use the PT01.
Set Default Value for the Work Schedule - here assign the default values for the feature. t.code PE03.
Good luck
Devi

How configure Work schedule rule in infotype 0007

Dear ,
I have a question that how configure Work schedule rule in infotype 0007.
I am trying but missing some steps .. so kindly give me proper steps to create this.
Thanks & Regards,
Manas

Sanchit,
When I created a new personnel area, I had to maintain all of the following nodes under Personnel Time Management:
- Group Personnel Subareas for the Work Schedule
- Define Groupings for the Public Holiday Calendar
- Group Personnel Subareas for Attendance and Absences
- Group Personnel Subareas for Availability Types
- Group Personnel Subareas for Time Quotas
- Set Personnel Subarea Groupings for Time Recording
Double-Check each of these and make sure you got everything.
Mary

Fast Entry for Infotype 0007

Hi All,
I want to configure fast entry (PA71) for infotype 0007.
I have created an entry in T588R. But for T588Q, I couln't find any fast entry standard screen for this infotype.
Please help!!!
Thanks,
Bhaskar

Hello friend,
I think this link will be helpful for you,
Re: PA71 - Fast Entry for Time Date, how to add 0007 for Fast Entry
If your problem still persists revert back to me i will help you.
Thanks,
Sri Hari.

Infotype 0007 - Mass update

Hi all,
I configured our system in a way that infotype 0007 should be created automatically in the background.
(SAP Customising Implementation Guide -> Personnel Management -> Personnel Administration -> Customizing Procedures -> Dynamic Actions)
And this works fine when I'm creating employees manually. Nevertheless, the employees uploaded with LSMW don't have this infotype created.
Do you know a program I could use to create the IT 0007 for the uploaded employees?
Thanks for your answer,
Thibault

Hi,
Dynamic action will not be triggerd when you upload data using LSMW.
Re: Dynamic Action is not triggering in LSMW Recording
Re: background in dynamic action
You will have to handle it with call transaction method. Please search the forum and you shall get more inputs.
cheers
Ajay

Infotype 0007 - Where used

Hello HR Gurus,
I need to know about infotype 0007 (Planned working Time). This infotype is used in Time evaluation for time processing.
I need to know where else is the infotype details like daily working hours, weekly working hours, monthly working hours and annual working hours used. I am sure that these details may be accessed in payroll, benefits and some other modules of HR.
Can you guys please let me know which all places (in reports, schemas, processing other than time) is this infotype accesed.
Thanks in advance,
Swapnil Mishra
SAP HR - Time Consultant

Hi Swapnil,
IT 0007 has work schedule and part time details which are basically used in TE as u know and in payroll.
Basically part time details, TMSTA and work schedule details are used.
I believe the above references will be used from IT 0007
cheers
AJ

Change of infotype 0007 is causing the infype 0488 to be change

hi,
Its regarding HR Singapore Public Leave Scheme , infortype 0488.
There are 2 leave schemes :
1. 1979 leave scheme (28 days)
2. 2004 leave scheme (21 days)
When CHANGE the Planned working time (infotype 007) (thru Pa30 ) from 100 percent to 50 percent and the daily working hrs from 8 hrs to 4 hrs .
the leave scheme automatically changes from 1979 leave scheme to 2004 leave scheme( it0488).
By right the infotype 0488 should be the same.
Did anyone came across this problem.
Can anyone advice me regarding this issue.
regards,
Sangita.

Hi Sangita,
Although I dont have personal experence on this issue, however this typically points towards a dynamic action.
Please check from T588Z view whether there is any dynamic action configured on change of infotype 0007 - which triggers change on the other infotype.
Cheers,
Aditya

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

Infotype 0007:Time management status

Hi Experts,
In Infotype 0007 , in the time management status field i have maintained the value as " Time Evaluation of planned times".
What does this mean ? ....
Does it mean that absences and attendences are not necessary to create. Kindly help me how the evaluation takes places
in this scenario.
Thanks in Advance,
Balaji

Hi,
This is SAP explanation:
Indicator 0 or BLANK:
The employee's actual times are not recorded, and his/her time data is not accounted using the time evalulation program.
Indicator 1:
The employee's actual times are recorded and he/she participates in time evaluation.
Example:
The employee's actual times are recorded at a time recording terminal.
The employee's actual times are recorded in the Attendances infotype (2002).
Indicator 2:
Employees' actual times are recorded and they take part in plant data collection. Their time data is accounted using the time evaluation program.
Example:
Employees' actual times are recorded using PDC systems.
Employees' actual times are recorded in the Attendances infotype (2002).
Indicator 8:
This indicator is intended for external employees. The employee's actual times are not recorded, attendances are recorded in the Attendances infotype (2002), and time data is accounted in time evaluation.
Indicator 9:
You can use indicator 9 for employees for whom only exceptions to the work schedule are recorded. In this case, the employees' actual times are not recorded, but they do participate in time evaluation.
Cheers

Infotype 0007 not found on 22.01.2010

Hi,
I've added IT2006 in V_T588D and a new entry on validity period for default value in VC_T559L based on QUOMO. In this infogroup, there is a dynamic action to create IT2006 (with a different subtype which I've added in V_T588D).
After I done with these changes, there was a message "Infotype 0007 not found on 22.01.2010" in PA40 when it comes to the dynamic action. The IT2006 screen which the dynamic action was supposed to call did not appear. Instead, it will just proceed to the next infotype. This was not the case before I made the changes that I mentioned above.
I've tried to reverse the change by removing the new entries in V_T588D and VC_T559L but the same message still appears, and the dynamic action did not call up IT2006 screen. I suspect that this message is caused by the dynamic action. How can I debug the dynamic action? In addition, what else could have caused this error?
I would really appreciate any help to resolve this asap. Thanks in advance.
Rgds,

HI Kok Siong
Just check the 7 infotype and maintain it for the requested period.
or if you want to use debug to find out what dynamic action is triggered you may set break point here:
1) main program depends on what infotype you what to debug for example for 1 it is MP000100, for 16 it is MP001600 and so on (T777D-REPID).
2) include MPPERS00
3) subroutine FORM end_of_screen (put break point for the line in bold)
      IF ale_flag IS INITIAL.                            "XFYAHRK063273
        IF pspar-vinft NE space. "infotype view         "XYLPH9K007065
          PERFORM dyn_measure IN PROGRAM (view_repid).   "XYLPH9K007065
        ELSE.                                            "XYLPH9K007065
          PERFORM dyn_measure.
        ENDIF.                                           "XYLPH9K007065
        PERFORM process_measure(sapfp50m).
        if pspar-massn eq space.                        "XYLN160088_2
      depth in rp_infotyp(sapfp50g) computed        "XYLN160088_3
      begin correction XYLN208111
      IMPORT depth FROM MEMORY ID 'DYNMEAS_DEPTH'."XYLN160088_2
        CALL FUNCTION 'HRPAD00_GET_DYNMEAS_DEPTH'
               IMPORTING
                    DEPTH = depth.
after it just check the variable DYNMEAS
at this time it contains the list of dynamic actions which will be performed for the debugged infotype

Error when create Infotype 0007-Planned Working Time of Personnel data

Hi Experts,
I'm creating Infotype 0007-Planned Working Time for Personnel data then having a error below.( I created Work schedule rule and Gennerated it).
Feature structure cannot be recognized, please see documentation
Message no. P0568
Diagnosis
Cause 1:
The structure of the feature is not saved in the feature directory.
Cause 2:
The feature structure is not defined in the program that reads the feature.
Cause 3:
The feature that the program expects does not match the actual feature structure.
Procedure
Cause 1:
Please advise your system administrator that all features must be regenerated. Please note that this generation must take place in client 000 first, and then in all other clients (report RPUMKF00 or the Generation function in the feature maintenance transaction (transaction PE03)).
Cause 2:
The feature structure must always be defined in the program reading the feature (see documentation for program RPUMKC00).
Cause 3:
Please contact your system administrator
I did using T.Code PE03 in Client 000 but I don't know what is Features?
Please tell me how solves it ?
Thanks so much.
Dungnv

infotype 0007 reads two features
SCHKZ - Default value for Shift indicator
TMSTA DEFAULT VALUE FOR TIME MANAGEMENT STATUS
Please have a look at both these features

Time and Infotype 0007

Hi ,
What process in SAP will generate the Infotype 0007 for every HR record ?
Regard's

If you already generated workschedules and some employees do not have IT0007 record then I think you will need to write a report to create IT007 for all concerned employees or check feature SCHKZ
if you are changing work schedules and want to regenrate you can use below process
Here is the steps to follow generating/regenerating work schedule rules.
Set work schedule rules and work schedules: Path: SPRO-> Personnel Time Mgmt-> Set work schedule rules and work schedules
Generate work schedules manually: Path: SPRO-> Personnel Time Mgmt-> Generate work schedules manually (PT01)
Generate work schedules in batch: Path: SPRO-> Personnel Time Mgmt-> Generate work schedules in batch (OG00) Otherwise use this program: RPTSHF00
You will have to check in PA0007 for at least one employee from each employee sub grouping to know whether work schedules are generated properly or not.
Moreover if you want to check more details check these tables (T550A, T508A, T552A)results.

Regarding infotype 0007 and t5550a

hi experts,
i have a scenario like this,i have to read the actual planned working
time of a praticular employee,from infotype 0007 i can pick the employee
number and WS rule but how will link to this from table t5550a,
what are the fields will i use to link between pa0007 and t5550a plz
help me.....

solved by own

Infotype 0007 default for full time employee

Hello,
We have a requirement where in infotype 0007 should by default consider all the employees as full time employee. We have an interface that gets HR master data from AS400 into HR infotypes. The interface is filling infotype 0007 with emp percentage as '0', this is wrong but we do not want touch the interface and at the infotype level we want to default emp percent to '100'.
I have enhanced the 0007 module pool and hard coded empct to '100.00'.
But I would like to know if this can be done by any standard customization?
Thanks,
Muktar

As a best practice please try not do hard code ur logic - this can be achieved through Feature SCHKZ.
The shift indicator is suggested as a default according to employee
group and subgroup in infotype 0007, Planned Working Time.
The return value of the feature is a shift indicator from table T508A - Work Schedule Rule.
Try to default ur work schedule rule which must default ur employment percentage field in IT 0007.
Hope this helps,
Regards,
Regi

Field Attribute change in infotype 0007 (P0007-ZTERF)

Hi All,
In infotype 0007 i want to change the field P0007-ZTERF - (time management status) attributes to output only.I have changed in field attributes in module pool.
Still it is allowing input. Is there any other way to make this field output only.
Thanks

Hi,
Go to SM30 and enter V_T588M then maintain MP000700 new entry for your country specific screen with P0007-ZTERF output field .
Maintain feature P0007 for your country.
Hope It will work.
Regards
Sunil Kondoju

Infotype 0007 fileds in configuring Benefits ?

Similar Messages

Maybe you are looking for