Infotype 0800 Material Assignment

Hi experts!
A company has independent contractors and employees. Both have a number of tools assigned to work according to their position and their personnel number.
We want to keep in control of this list of tools that are assigned, in case an employed could change his position or is fired, these group of tools have to be re assigned to the personnel number of the replacement.
I tried with the infotype 0040 "Objects on Loan" but I have to define many objects (200). Is It possible to know from the materials sector (MM) which Personnel's number have each tools, through the Loan object reference number? Or Can I use another infotype 0800 u201CMaterial Assignmentu201D?
Thanks in advanced!

f

Similar Messages

  • Material Assignment in Master recipe

    Hi,
    Is there any FM/BAPI to assign material into a master recipe? Currently, we are using BDC to call C202 transaction for this purpose. This process takes long time for material assignment which leads to performance issue.
    Thanks in advance
    Senthil Kumar A

    In LSMW , object BUS1012 is offered for routing creation and change .
    Unfortunately there is no object for master recipe creation & change and there is no standard batch input, nor BAPI/IDOC, nor   direct input. You should create your own batch input or CATT.
    Here is a possible procedure:
    Please record a Batch-Input with transaction SHDB and try if this work. If not please try with TOFF as described in the notes.
    Read carefully SAP note 142022.

  • Material Assignment in routing ?

    HI Gurus,
    can anybody please Explain in which business scenario Material assignment In routing is used.i am confused about the functionality in the business .
    Thanks&regards,
    Venkat.

    Dear Venkat,
    Routing is the sequence of operation/activities through which production takes place across the work centers ( machines ) which is created by pp consultant.
    Example : If you want to stitch a shirt we many need to do following activities.
    Taking the measurements from the user
    Cutting the fabric according to measurements
    Stitching / sewing  ( Joining the parts like collar / hands / Yoke / Pocket  / Cuffs....Etc)
    Buttoning ( adding the buttons to shirt)
    Quality checking
    Ironing
    Packing ..etc.
    In the same way based on the product you are going to do it might have some steps to make it, we will maintain the same steps / sequences as ROUTING in SAP PP.
    Regards,
    N.S.Rao

  • Tables for mm03 (specification-material assignment)

    Hi All,
    We have a need to find out which material masters are assigned to GCD (Global Chemical Database) specifications.what are the possibilities from Material master side.
    Specification information (in tab "Spec assignment") on material master side is on a structure RCGMMJIOT. can anybody help with the table name for the corresponding structure.
    Thanks in advance

    HI Vibhuti,
    More detailed information about EHS tables are as follows
    Description--> Table Name
    Specification Header     ESTRH
    Identifiers     ESTRI
    Identifier - Regulatory list assignment     ESTRL
    Referencing in specifications     ESTRR
    Specification  - Material assignment     ESTMJ
    Specification status assignment     ESTST
    Specification - Value Assignment Type Assignment (Property tree)     ESTVH
    Value assignment Item (e.g.  composition values)     ESTVP
    Shadow table for AUSP (Characteristic values)     ESTAUSP
    Additional Information: Value Assignment Assessment     ESTDR
    Additional Information: Value Assignment Source     ESTDS
    Additional Information: Value Assignment Usage     ESTDU
    Additional Information - User-Defined Text     ESTDF
    Value assignment table (Classes)     ESTVA
    I hope this complete list may will be helpful for you.
    Regards
    Amol

  • BAPI to change material assignment with serial number (IQ02)

    Hi Experts,
    Please let me know the BAPI to change material assignment with serial number in IQ02. I am using BAPI_EQUI_CHANGE, but this does not work. Waiting for Your valuable inputs...
    Thanks in advance,
    Birendra

    Hello Birendra,
    Honestly, I do not have good experience with the BAPI for serialnumber change...
    would suggest to explore function module:
    SERIALNUMBER_LIST_UPDATE
    or
    SERIALNUMBER_LIST_SAVE
    Also run ST05 to trace what kind of data it passed to these function modules by running IQ02!
    Cheers
    Krish

  • MM_SPTOCK - Problems when Material assigned to more than one Batch Id

    Hi Experts,
    We are using MM_SPSTOCK object for archiving Batch Records. While executing this Archiving object ,Suppose we have a case where there exists a  material assigned to more than one batch .Lets Say B1 and B2 for Material M1. If we are interested to archive the Batch record M1 B1 then M1 B2 also getting archived even though the batch B2 is not specified in the selection criteria of MM_SPSTOCK .This leads to Data inconsistency.Is there anything that we need to do in order to save the second batch record getting archived.Please suggest.Let me know if you need any information
    Kind regards,

    Hi All,
    Let me know if you come across this situation anytime and have a work around for this.

  • Routing creation with material assignment

    Hello sap gurus,
        I have created routing for semifinished product.Now i want to create routing for finished material but i want to use the same routing as we created for semifinished product by material assignment function in routing.when i go to do like that i am facing one problem.when i go to component assignment for finished material to operation,it shows the component over there which are in Bom of semifinished product,not the component which are in Bom of finished material.so how to do the component assignment if i create the routing by materail assignment function?
            Hope u have understood my problem.

    Hi Jitendra,
    Instead of making the scenario complex, I suggest you to go for separate routing and BOM for the semi-finished and finished product.
    How do you differentiate the routing of both the finished and semi-finished in only one ?
    regards
    Ram Kumar

  • Assigment Button on 0001 Infotype (Org. Assignment)

    Hi HR Gurus,
    How can i disable/enable the Assigment Button on 0001 Infotype (Org. Assignment) ???
    The table T588M does not give any option for doing so. Can u guys advise ????
    Thanks
    Jay Gandhi

    Hello Jay,
    I'm not sure I understand your problem.
    You want the Org.Assignment-Fields to be disabled? Look at PLOGI in transcation PE03. There you can configure if personnel / organizational management is integrated. If not, fields should be disabled.
    If that is not your problem, please explain.
    Regards
    Herbert

  • Deleting Infotype 1 (Org Assignment)

    Hi All,
    I need to delte Infotype 1 (org assign.) for an emp for the period 01.05.2008.- 31.12.9999.
    By mistake the payroll area entered is wrong.
    Now the payroll is not running.
    I m not able to delete the record as offcyle has already run.
    I even tried Promotion and Orgn Reassignment.
    I cant even delete the payroll results of offcycle run.
    Plz give me the solution.

    Hi..
    if u want to delete payroll results..
    try PU01
    then try
    PU00
    Edited by: Ramm on Jun 6, 2008 4:55 PM

  • QIP : material assignment button at header level

    Hi everyone,
    Since QM is not my main module  : can someone explain to me what the "material assignment" button is for in a quality inspection plan (at header level)?
    Thanks in advance
    P.

    "material assignment" : consider a scenario where there is two vendors for a particular material & your requirement is to check material of different vendor with different specification.
    Then in that case you can specify the Material ,plant & Vendor in "Material assignment " field.
    Say you have maintained vendor "X" in the task list & Vendor " Y" in other group counter for same material with differnt cherectiristics in it.
    So when inspection lot with vendor X will create ,system will automatically assign the task list with Vendor X in Material specification.
    same with vendor Y.
    If you do not maintain anything against material here ,irrespective of vendor same task list will attach to all vendors.
    Also Customer specific task list same as that of Vendor can be assigned through Material assignment
    I hope this will add some value.
    Regards
    Sujit

  • Mass Material Assignment to Cost Object Hierarchy

    Hi,
    I have to assign the materials to Cost Object Hierarchy. I know that it is done thorugh TC- KKPHIE.
    But if I have to assign more than 1000 materials at a time , I cannot do that in mass.
    I tried to do it thorugh LSMW. The system is not allowing it to create LSMW.
    I am stuck. Please let me know is there any other method of material assignment in mass.
    Or any other transaction code.
    Hoping to hear

    Hi Ravi,
    I have tried using LSMW and BDC. Its not working.
    Is there any other transcation of material Assignment to Cost Object Hierarchy.
    regards
    Kami

  • CWBQM - Allows duplicate material Assignment record.

    Hi All,
    Can any one tell me is there any sap note is available for Work bench transaction CWBQM, in order to fix the issue of "duplicate material assignment record" in MAPL table.
    For example If you assign Plant "100" and material "M1" and customer " C1" to an Inspection plan through CWBQM,system allows to add the record in MAPL table which already contains the same record, whereas if you  try to do it thru QP02-Material asignment ,system throws error message "Material has already been assigned to the inspection plan".
    Thanks for your valuable time.
    Regards
    Anbu

    Hi
    As QP02 does not allow to enter the customer system only considers it as unique plant & material combination....whereas in Workbench you can able to enter customer so system consider unique plant-material-cutomer.
    There is no such a Note available in QP02.
    Regards
    Sujit

  • Std Network with Material assignment

    Hi,
    I am creating Project via Standard WBS and Network. I have also assigned few materials to this Standard NWP. There are few materials assigned to this std NWP all with Base QTY 1000.
    So when i add Execution Factor 10 when creating WBS, i expect system to divide Qty of material assigned on Std NWP by 1000 and then multiply by 10, but system is not dividing the Qty by 1000?
    Is there some config i need to do so that Base Qty maintained in Std BOM gets divided by the Qty of material that gets assigned to operative WBS being created?
    Regards,
    Jatinder

    Hi,
    To my knowledge, the execution factor is applicable only for the quantity at either the WBS or network activity level , not for the requirements it generates.  I may be wrong.

  • Table to check WBS-Network-Material assigned to this network

    Hi All,
    Plz advice. What table should i refer ,to check WBS element, network assigned to this WBS, and material assigned to this network.
    Thank you.
    Best Regards,
    Nies

    Hi Nies,
    Tables are as below:
    WBS elements - PRPS
    Network -CAUFV or AUFK - Pass the WBS element as PSPEL
    Material - RESB .
    Pass the reservation number into RESB. Obtain the reservation number from CAUFV table. You can pass WBSE ot Network number also. But RESB being a huge table, it is advisable to pass the key field "Reservation".
    Muraleedharan.R

  • Material Assignment report?

    Hi
    Is there any report available in QM for the Material assigned in an Inspection plan?
    I could get the data from MAPL table,but I need it in report.
    Please let me know.
    Regards
    Anbu
    Edited by: Anbu C on Aug 26, 2009 11:34 AM

    Hi Anbu,
    I don't know any better report for the same, but you can drag out the list by this way easily. Follow the steps,
    Run Trx QP02/03.
    Now press "F4" in the Group field, and open the small window for Restrict Value range for Task list selection.
    Here you need to use the restriction option by "Search Using Material"
    Here put the filter as per your requirement and convenience.
    Press Enter
    System will give you the list for Task list Group-Counter Assignment to the Material.
    I hope this will meet your purpose.
    Regards,
    Shyamal

Maybe you are looking for

  • How to Use Table name at run time

    Hi All I have created a function that accepts a table name as a parameter and returns the maximam sequence number, but in my function body i can not write the parameter name as a table i.e. CREATE OR REPLACE FUNCTION MAX_ID(TAB_NAME Varchar) RETURN N

  • Acrobat 9 convert to grayscale

    How do I convert a PDF to grayscale in Acrobat 9 Standard for Windows? I see all kinds of tips for Mac, Pro or Extended. But I don't see any such options on on my menus or configs. thanks!

  • Is it possible to have a "double set" of audio outputs?

    Hi! When working in our studio we use 3 daisychained FP10's as audio interface and an analog Soundcraft Ghost mixer. In Logic I have the outputs of the different tracks assigned to the 24 outputs of the audio interfaces. So when I playback I can do t

  • Javascript in Fragment not working

    I just don't see why the following isn't working. I know it's a pretty simple javascript to display something when it's value is chosen. I'm a novice and just trying to understand the logic here... I have several drop-down lists - each one saved as a

  • Help: Strobe Player: Live DVR stream resetting to start vs Live point

    Update: 11/27 23:00- The version of the strobe player we are using is the most current version- I tested my smil file with a stock strobe player tied dirctly to the akamai CDN - the VBR is working correctly but I still have an intermittent issue when