Infotype 21 Not filled by pfal tcode

Hi folks,
i have an issue trying to fill the pa0021 struct. related to 21 infotype by pfal code, this tcode as you know generates and idoc, but if i make any changes to an employee, does'nt show the modifications i'd made.please hlp, me.

Try debugging pfal. But i am very sure that if there exists an entry in 0021 infotype and there is no filter in the transaction pfal and no filter in the configuration of the message type then the values gets filled.
try debuggin with one pernr and use the update mode and put a filter for only 0021 and see that the segment is getting filled or not.
also are u checking the idoc in the receiver or the sender system?
Regards,
Divya

Similar Messages

  • Error - Balancing Line Item Profit Center not filled in Line Item 007

    Hi
    I am trying to do a transfer posting from one vendor account to another. However, system is giving an error - Balancing Line Item Profit Center not filled in line Item 001. Pls suggest.
    Regards
    Vaibhav

    hi  vaibhav
    you go through this Tcode  FAGL3KEH  and maintain default profit centre. in the  error message system shown GL accounts
    hope you userstand
    thanks
    dharmendar

  • Balancing field "Profit Center" in line item 001 not filled in vendor post

    Dear Experts,
    Document Spitting is activated in our system. Now in Vendor posting we are getting the error " Balancing field "Profit Center" in line item 001 not filled ". Please provide your suggestions on this.

    Balancing field "Profit Center" in line item 001 not filled  error is coming due to splitting .Try to do the following and check ...
    First check the line item 001 and get the GL no for which GL you are getting the error.
    Goto PCP0 and double click on Document then goto Settings -> Layout -> Change here select Document Line Number ......check the line item 001
    Ask your FI persons and get the required profit center or default Profit Center for that company code.
    Goto Tcode FAGL3KEH and enter the company code......enter GL code and Default profit center in the last column.
    Before doing this check the Business Area in IT 0027 and IT0001.Make sure that same Business Area is there in both the ITs.
    Mohan

  • Infotype Data Upload through transaction PFAL

    Hi All,
    Is there any option to distrubute data infotype wise in the transaction PFAL, i.e., i want to move the data into a particular infotype only.

    Hi
    Make sure the structure that you are using in the upload is the same that you have defined in your LSMW and may be in the same order. Also the fields of the structure defined are correctly mapped to your Batch input recording.
    In this way you should not get any formatting error.
    Thanks
    Nikhil

  • ChaRM Reporting - Transport Request, Tak and Owner columns not filled

    I am using ChaRM reporting functionalities (/TMWFLOW/REPORTING transaction). When I select "display header, project, task list and transport", transport request, task and owner columns are not filled with values.
    What is the problem?
    Thanks
    Antonello

    Hi,
    1. Is it configurd for ChaRM functionality in your systme landscape.
    2. If not, please do the ChaRM configuration using by tcode SPRO.
    Regards,
    Srini Nookala

  • MP000200, screen 2044 fields are not filled

    Hi all
    We have used screen 2044 for many years, but recently som fields are not filled.
    When creating infotype 0002 and typing the ID number (PERID), the birthdate (GBDAT) is automatically filled.
    Normally these 3 fields are filled ....
    GBTAG Date of birth
    GBMON Month of birth
    GBJHR Year of birth
    ...but now the are left without values.
    Can anyone help me with that case?

    Hello,
    I'm wondering if IT22 is not subtype mandatory ... check in T582A if "Subtype obligator" isn't ticked.  Therefore you are obliged to fill the field SUBTY in your BDC.
    regards
    Hadrien

  • Balancing field profit centre line item 001 not filled

    Hi Guru's,
    am facing  payroll posting problem system throwing error as Balancing field in profit centre line item 001 not filled  i have checked every thing is correctly maintained and please guide me where i have gone wrong and where exactly i get  this line item to check please help me in solving my problem, as it is urgently required
    thanks in advance
    chaitra

    Balancing field "Profit Center" in line item 001 not filled
    Above error is coming due to splitting .Try to do the following process
    First check the line item 001 and get the GL no for which GL you are getting the error.
    Ask your FI persons, what is the default Profit Center for that company code.
    Goto Tcode FAGL3KEH and enter the company code......enter GL code and Default profit center in the last column.
    Before doing this check the Business Area in IT 0027 and IT0001.Make sure that same Business Area in these ITs.
    Mohan

  • Balancing field "Profit Center" in line item 001 not filled

    When i am doing Posting with clearing(FB05) i am getting the below error message "Balancing field "Profit Center" in line item 001 not filled"
    Background: When we are doing the MIRO transaction we have used a diffrent profit center than it came from the Purchase Order where we have added extra cost and included the new line items under GL tab and posted the Invoice.
    Now i want to tranfer that to a diffrent Vendor and clear it. So i used FB05 transsaction. When i tired to do the transfer posting with clearing i am getting the error message "Balancing field "Profit Center" in line item 001 not filled" As we have under the document split Zero balances check box checked along with the Profit center Mandatory for field Profit Center. The system could not determine which profit center it has to use.
    Thanks in advance.

    Hi Kiran,
    Could you tell me how you are able to resolve this issue as we are having the same issue.
    Did you use the substitution rule?
    Please let us know.
    Thanks,
    Madu

  • Bal field "Profit Center" in line item 001 not filled at the time of F-53

    We are in ECC6
    I have posted a vendor document.  The entry is shown as under.
         GL                           CC     PC     Segment
    Dr     Expense GL-1     RV01     RGV1     Hyderabad
    Dr     Expense GL-2     RV02     RGV2     Mumbai
    Cr     Vednor a/c               
    but when i am posting a payment document (Dr Bank GL and Cr vendor a/c) to this vendor I am getting the following error. 
    Balancing field "Profit Center" in line item 001 not filled.
    I have check ed the configuration setting in this regard.  Zero balance, mandatory fields for profit center and segement check box is enabled.  And also the inheratence check box is also enabled.
    Pls suggest soulution soon for the above problem.

    Hi,
    Try to default the profit center in FAGL3KEH for the Bank account and try posting.
    In SAP, the vendors and customers cannot be assigned to any profit center. They derive the profit center from the profit center picked from the GL as in the case of the expense entry that you mentioned.
    Try to assign a default profit center and check.
    Regards
    Hari

  • I just bought a Samsung S22B310B computer monitor and hooked up to my Mac Mini. I have my mac set to the 1920X1080 resolution but the entire screen (21.5") is not filled. It looks like non HD channels do on an HD TV. Used regular hook up not DVI.

    Just bought Samsung S22B310B computer monitor and hooked it up to my mac mini. I have my mac set to the 1920X1080 resolution but the entire screen (21.5") is not filled. How do fill the screen? it fills the screen on other resolution settings. I have it hooked up regularly and not to the DVI hook up. I'm not a computer savvy person please help!

    That monitor supports both (digital) DVI and (analog) VGA connections, so you should not need a converter or use a different adapter.
    You should use the Apple Supplied HDMI to DVI Adapter and a (digital) DVI cable to the monitor.

  • Web Page is not filling Mac Display - ene when maximized

    web pages are not completing filling the mac book display. Maximize does not fill the display, I am still able to see my screen saver on about 25 percent of the display. I downloaded the battery update last night and this problem appeared.
    Thank You

    Hi jbpdap,
    Do the following> on you right hand down corner there are a view ///// dashed lines. Now place the mouse pointer on it an drag the Safari window to the size (maximum size) you like.
    Reload the open Safari window (any web page is OKAY). Now quite Safari application> Relaunch Safari.
    If this is not working right a way do the above again ...
    Good luck ...
    Dimaxum

  • Portal Report from SQL query will not fill the page irrespective of column width.....

    I'm displaying a report in a portal and if you run in full screen the table does not fill the page.
    I can change the column width from xx percent to xx pixel and nothing makes a difference
    any ideas?

    Hi,
    Which version of portal are you using. This is a bug. It has been fixed in 30984.
    Thanks,
    Sharmila

  • 0HR_PY_1 Datasource: Fields not filled

    Hello to everyone!
    I'm afraid that I need some help from you. We are extracting HR data via 0HR_PY_1 Datasource and I have noticed that some fields are not filled by the extraction program. I've read BW Online Help about this datasource  and I have realized that the extraction program doesn´t fill these fields.
    Do you know how can I do to make these fields to be filled?
    The fields are:
    - KOKRS_CO
    Controlling area 
    Not filled
    - CO_AREA_WP
    Controlling area of master cost center
    Not filled
    -LSTAR_CO
    Debited activity type
    Not filled
    VORNR_CO
    Debited transaction
    Not filled
    GSBER_CO
    Debited business area
    Not filled
    KOSTL_CO
    Debited cost center
    Not filled
    BUKRS_CO
    Debited company code
    Not filled
    NPLNR_CO
    Debited network
    Not filled
    AUFNR_CO
    Debited order
    Not filled
    PS_POSID_CO
    Debited WBS element
    Not filled
    Thanks in advance!
    Best regards,
    Mª Victoria Durá

    Thank you very much for your help but, I'm afraid that the procedure that you explained is for enhancing the datasource but my problem is that the fields already exist but they are not filled by extraction programmes. I don't understand why does SAP make this and I was wondering if there are any way to make these fields to be filled using the standard procedure. I mean, if these fields are not filled (and SAP tells you so in BW Online Help), why these fields are included in the extract structure and in the datasource?. I tend to think that there are any procedure to follow in order to fill these fields. What do you think about it?. In adition, the not-filled-fields are CO objects so it doesn´t appear to me to be very easy the filling of them.
    I don't know if anybody has been in the same situation or if is there any documentation about it that can help. Thank you for your help!
    Mariví

  • Error Message-- For Balancing field "Profit Center" is not filled

    Hi All,
    When I do Shipment Start get Error-Message for Balancing field "Profit Center" is not filled!
    A PGI for the DNXXXXXXXX is not possible!
    Can u please help me how to resolve this issue ?
    WM Baby

    Hi,
    AS per configuration , there is prifit centre assignment  .Enter the profit centre in the field of profit centre by the help opf F4.
    Regards,
    Andra

  • FI:While posting MIRO getting Error of Balancing field Segment not filled

    Hello SAP Gurus,
    While  posting MIRO getting Error of Balancing field Segment in line item 001 not filled
    Message No.GLT2201.
    Please suggest me solution for it i read lots of related threats but could not solve this error.

    SPRO-Financial Accounting (New)-General Ledger Accounting (New)-Business Transactions-Document Splitting-Edit Constants for Nonassigned Processes-Select your constant-Double click and Select Assignment of profit center- Enter your dummy profit center here   otherwise
    SPRO-Financial Accounting (New)-General Ledger Accounting (New)-Business Transactions-Document Splitting-Edit Constants for Nonassigned Processes-Select your constant-Double click and Select Assignment of values-Enter here segment.

Maybe you are looking for