Infotype 34 & 35, is there any report for them?

Dear all,
      Anyone knows if there is a report to show data from infotype 34 and 35?
Thanks in advance for your help

Hi,
You may create a custom ad-hoc report for these infotypes using t-code SQ01.
Hope this helps,
Reward points if helpful,
Thank You,

Similar Messages

  • Is there any report for service level agreement monitoring?

    Regards,
    Lament

    Hello
    To configure the SLR Report, goto transaction DSMOP or DSWP
    in soution overview, choose your system (i'm suposing you already configured monitoring for your system)
    goto tab Solution Monitoring, choose operations setup on the left, and Service level reporting on the right.
    there you can activate service level reporting, and customize your report.
    If you need more help, let me know.
    Regards
    Geert

  • Time constraint in 0008 infotype - any report for this siituation?

    Hi,
    I need some help to solution a big problem with time constraint and 0008 infotype.
    Resume:
    when I put the "2" time constraint, all the history of 0008 entries are changed...
    For exemple:
    Old (before "2" time constraint):
    0 - 01.11.2007 - 31.12.9999 - 1000,00
    0 - 01.10.2007 - 31.10.2007 - 900,00
    NEW (after "2" time constraint):
    0 - 01.11.2007 - 31.12.9999 - 1000,00
    0 - 01.10.2007 - 01.10.2007 - 900,00
    BR - 01.10.2007 - 01.10.2007 - 900,00
    OR
    0 - 01.11.2007 - 31.12.9999 - 1000,00
    BR - 01.10.2005 - 01.10.2005 - 900,00
    there aren't logical situation, all the records have a lot of errors...
    Are there any report that corrects this situation????
    Regards!!!!
    Sandra

    Daniel,
    thanks for your response, and here's some more info:
    - I've use the time contraint in multiple playlists, that have worked just fine before adding the time constraint;
    - initially, after adding a time constraint (usually something like "time" "is less than" "10:00") everything seemed fine;
    - only a few days later I noticed that my playlist hadn't been updated correctly. For example, one of my playlists consists of songs rated 4 and I limit to 50 songs by least recently played; with over 900 songs rated 4, after a song was played it should disappear from that playlist for a while but some songs didn't; also, sometimes I would see less than 50 songs in that playlist;
    - after removing the time constraint the playlist updated correctly again
    I know that the fact this only appears after a few days (or that I've only noticed it a few days later) makes it pretty tough to narrow down but that's all I've got so far.
    Thanks again,
    Heiko.

  • Infotype 1002 (LMS Course Description): Is there any report?

    Hi Experts
    We want to print all description for our courses in a report. Is there any report in SAP which takes the description data from infotype 1002. I know the tables hrp1002 and hrt1002 as well as the view hrv1002a. But I can't find any report we can use for that.
    Does anyone have an idea?
    Thanks,

    Hi Dilek
    Thank you for your information. I was able to execute infotype 1002 from a course type. The problem now is that I can't see the real description from the subtypes like "Abstract", "Course Content" etc. It shows me only "With 7 Description" in the Description column.
    Do you know how I can see the real content?
    Thanks,
    aziz

  • My iCloud on my phone is undJer another persons account I however am no longer with them and want to cut all ties and is there any way for me to change my iCloud account or will it affect my phone? And it's photos, apps, music?

    My iCloud on my phone is under another persons account I however am no longer with them and want to cut all ties and is there any way for me to change my iCloud account or will it affect my phone? And it's photos, apps, music?

    You have to delete the iCloud account but you can keep all your data such as Contacts, Calendars etc. when you delete the account you will prompted to "Keep on my iPhone".
    All your purchased content (like apps and music from iTunes Store) belongs to the original ID and you have to re-Purchase them under your Apple ID.
    Photos in Camera Roll remains in Camera Roll.
    Photos in photo stream that are not in Camera Roll must be saved in Camera Roll.
    Photo that previously synced from iTunes remains in photo library until you synced with another iTunes library (another computer).
    Also sign out from iMessages, FaceTime and Home sharing (Settings>Music)

  • Like 4 years ago i bought some TV shows. That computer is long gone. Is there any way for me to download them again?

    Like 4 years ago i bought some TV shows. That computer is long gone. Is there any way for me to download them again?

    See Here for 
    Download Past Purchases
    http://support.apple.com/kb/ht2519

  • Is there any possibility for extraction of statutory reports in std sap....

    hi sap gurus,
    good afternooon toall,
    is there any possibility for extraction of statutory reports in std sap r/3 with out any customization
    is there any possibility ?
    for eg:
    the reports which will be given for internal audit purpose.
    like tax, lst,vat reports
    plz let met know
    regards,
    balaji.t
    09990019711

    Dear balaji
    check j1i2
    thanks
    G. Lakshmipathi

  • Is there any sychronizing alaram theme for downloa...

    Hi, 
               Is there any synchronizing alram theme for this mobile. Even nokia 1600 which i used earlier, i had speaking alarm clock. It will synchronize with the actual alarm time and give mesage "this is the time to get up. The time is ...so..so synchronized with the actual time in snoozing also. I get lot of ringing tones, which will only say the tone you saved. Can i ask this kind of question, moderator pl

    The speaking clock is the inbuilt function of some of the lower end Nokia models. As for the theme, you can check on the Nokia Store or on getjar.com for applications.
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • Is there any functionality for AVERAGE in ALV, like do_sum, subtot?

    Hi Experts,
    In my_alv report, am doing sub/totals for prices, by using do_sum, subtot functions.........fine. But, I need to do/display the AVERAGE value for Discount % column?
    Is there any functionality for AVERAGE in ALV, like do_sum, subtot?
    thanq

    hi
    check these links out
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    regards
    vijay
    reward points if helpful

  • I accidentally formatted my portable hard drive when setting it up for time machine. Is there any way for me to get back my lost files?

    I have an external hard drive of the brand Western Digital.
    Before I got my iMac I moved a lot of my important files from my PC to the hard drive and today I went on and connected it to my iMac to move my files over to it.
    When it had connected a window popped up that asked if I wanted to use this hard drive with the program Time Machine and create backups. Without thinking it trough enough and reading the warning properly (I'm stupid I know) I clicked "yes". I then realised how stupid it was and cancelled the formatting of the hard drive. But somehow the program still managed to delete all my important files and can't find any way to get them back. Neither can I connect the hard drive to my PC anymore so I can't check if the files are still there (which I doubt they are since I can't see them on my iMac either).
    And now I wonder: is there any way for me to get back my lost files or are they lost forever?
    Thank you in advance!
    //Gina

    A data recovery specialist or some data recovery programs should be able to help.  Most format simply rewrite the directory tree saying no files are on this disk.  The bits that represent the files are still flipped appropreiately so they still exists, you just don't have the location info to get at them.  Secure formats and erases rewrite each bit to a zero or 1 or random so the data is then truely gone.  This type of format takes a long time to complete.
    I'm not making a recomendation of a particular program but here is one company that does what you ask:
    http://www.remosoftware.com/mac-recovery  The cost is pretty high but I'm sure they don't sell many copies and need to cover their development costs.
    Good luck and don't write anything on the freshly formatted disk until you decide what to do.

  • Is there any way for me to get my music off of my iPod?  I had to get a new computer and no longer have my files...but most are cds

    Is there any way for me to get my music off of my iPod? I had to get a new computer and no longer have my files, most of it is cds...

    Your iPod can only be synced with one computer at a time.  If you try to sync it with a new computer/iTunes library, it will replace the contents of the iPod with whatever is in the new library. You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabling the prevent iPods,iPhones, and iPads from automatically syncing option.
    Before doing anything else,  authorize the new computer with your iTunes Account.  In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
    Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
    iOS: How to back up
    Now onto synced content such as music, videos, photos, etc.  For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases.  For all other nonpurchased iTunes content, see this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier.  Here is more on backing up and restoring your iPod.
    iTunes: Backing up, updating, and restoring iOS software
    If you do happen to lose any purchased content, you can always redownload it from the iTunes Store again at no cost via iCloud.  See this article for information.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    B-rock

  • I recently gave my old iPhone to my nephew, he switched it to his phone account, but somehow I now have his contacts on my new iPhone 5. When I look at my iCloud account, it lists his contacts. Is there any way for me to get my contacts back?

    I recently gave my old iPhone to my nephew, I did not clear out my old phone before I gave it to him, when he transferred to his account, he had my iCloud info on the phone, and it updated the contacts on my new iPhone 5 to his contacts. Is there any way for me to get my contacts back?

    This is caused by using the same iCloud account on both phones.  When you do this any data you sync with the shared iCloud account such as contacts is merged and will appear on all devices connected to the account.  To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores). 
    Decide which iPhone will be keeping the current iCloud account.  On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. 
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (i.e., deleting your nephew's data from your account, and vice versa).
    As for recovering your lost contacts, if they aren't on icloud.com when you check from your computer, you will have to recover them from a backup source.  You could try restoring to your last backup but this doesn't always work for contacts.  (Chances are you nephew deleted your contacts from his phone, not realizing it would also delete them from yours.)

  • Is there any report to see the consumption details?

    Hi,
    Is there any report to see the consumption details? with material number or without material number?
    Regards,
    Sattuj

    There are a no of ways from where you can get your desrired data....
    Table mver---used for material consumption.
    T code mcre---again used in consumption reports,
    Table MVER gives you detail of Material Consumption
    Also, MSEG (MENGE) and S026 (ENMNG) ... Pls restrict the selection condition for material with movement type 261 in table MSEG
    Tables
    DBERCHV Consumption History
    DVER Material Consumption for MRP Area
    You can get all the consumption details in MB51 report by selecting relevnt movement types. And MB5S also.
    For Repetetive :-
    Check this T Code MCRP,which gives you the exact material consumption datewise or order wise.
    *Report MCRE is widely used for the material cosnumption than checking in COOIS.*
    Also these reports can help you.
    MCPF Material analysis: Dates
    MCPO Material analysis: Quantities
    MCPW Material analysis: Lead time

  • Is there any report to get the header/item text at GR stage together?

    Hi gurus,
    Is there any report to get the header/item text at GR stage together with a date range?
    at the point of goods receipt?  Or a report that could be run to search for header/item text at GR stage together with a date range?
    Text that was entered at the point of goods receipt?

    Hi
    Check MB51 report with posting dates for materials/vendors and use the display variant document header text (which is GR header text). I hope this is the one you are looking for.
    Thanks

Maybe you are looking for

  • What's the best way to set up new imac for logic etc?

    In brief: Getting new imac (27", 3.4 i7, 8-16GB ram, 1TB HD). Will be using it mainly to run Logic Studio (loads of plugins) and Final Cut Express. I also have 2 external Hard drives one 500G one 1TB. The last imac I bought was my first and just went

  • Audio greyed out after a while

    Hi all, Can't seem to find a definite solution to this. When I keep my iMac on for several days going in to sleep mode every time I leave it for the night I end up with a greyed out speaker icon and thus no sound. When going into the sound settings a

  • IPad 3 charging issues

    I have had my shiny new iPad plugged in overnight with it's included iPad charger  (it was displaying some context for some of that). I have just woken up and it's only at 39%!!!! Now I know that it's meant to take longer to charge but that is unbeli

  • How can I get a disk out of an iMac G5 that does not turn on?

    My iMac G5 won't turn on and I need to get a disk out of it.  Do I need to open up the computer in order to get it out?

  • Configuration CMS

    Hi all i have some questions regarding CMS i have to implement CMS to transfer design object and configuration object to PRD from DEV. my XI environment; DEV BOX, PRD BOX, SLD BOX, JDI(CMS) BOX. we have total 4 BOX. according to help.sap.com, "You en