Infotype Additions did not upgrade to ERP2004

Hi all,
We have recently finished a test run of our upgrade from 4.6c to ERP 2004 in our DEV environment (we will be going to ERP 2005 instead in a few months). While I was looking around to see what has changed and what hasn't, I noticed that some infotype modifications did not come through. A couple of years ago we made extensive changes to infotype 565 (Retirement Plan Valuation Results), and in our upgraded box the infotype has reverted back to the orignal SAP format. I would prefer not to have to make all of the changes again. I had created an additional tab and subscreen, and the subscreen does not even exist in ERP 2004 now. Has anyone come across this issue? If so, how did you "fix" it? Do you know if this will be a problem when upgrading to 2005 as well?
Thanks in advance.
Mary

Mary,
Other than SPAU I don't know what to tell you. But if you find an answer can you please post it to this thread? We are getting ready to upgrade our HR system from 4.7 to mySAPERP 2005 and if we come across something similar it would be great to know.
Regards,
Chris

Similar Messages

Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade.

Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade. Can you help please?

I too had the same issue. This is how I resolved it http://www.parkhi.net/2011/12/error-8288-ipod-touch-upgrade-ios-31.html

HT1338 I upgraded to 10.6.8 and my imagecapture did not upgrade. Why? Do I have to buy a new verson? Where is new version? tia

I upgraded to 10.6.8 and my imagecapture did not upgrade. Why? Do I have to buy a new verson? Where is the new version located?
Thanks. I cannot access the imagecapture from my builtin camera now. I have a MacBook-5 years old. Thanks.

OK. Here. This message is on the front-"NO camera or scanner connected." But when I wanted a picture in Facebook to use the camera the camera turned on and worked a-ok. Why?
I can't click on 'devices' or 'shared' because they are not live.
So what's going on?
Thanks.
Dan

Upgraded second computer - did NOT upgrade iPhoto to iPhoto11

Purchased Mountain Lion, loaded successfully on iMac and it upgraded the iLife products to iPhoto 11, iMovie 11 and GarageBand 11. Since we could put it on up to three computers, I downloaded and installed on my wife's iMac as well. Worked fine - except it did NOT upgrade iLife products from iPhoto 9 to iPhoto 11. Now it's telling me we have to purchase iLife in order to upgrade. Why didn't it upgrade the second computer?

The iLife apps are not part of the Operating System, so I'm not sure what happened on your first machine but purchasing Mountain Lon did not upgrade your iLife apps.
Are you sure you're not confusing Marketing Names and version numbers?
did NOT upgrade iLife products from iPhoto 9 to iPhoto 11
iPhoto 9 is iPhoto 11
Marketing names and version numbers are confusing.
The marketing name iPhoto 6 corresponded to the version 6
The marketing name iPhoto 08 corresponded to the version 7
The marketing name iPhoto 09 corresponded to the version 8
The marketing name iPhoto 11 corresponded to the version 9
Not that this is confusing or anything.

Photoshop did not upgrade to Extended after install?

I had cs6 creative suite standard and upgrade to Cs6 creative suite design and web premium, and it did not upgrade my Photoshop to the extended version (which is the whole reason i bought it) Heeeelp?

Deactivate the suite under Help --> Deactivate and let it reactivate. Also you may need to clear out your cache.db for the activation system (C:\Program Files (x86)\Common Files\Adobe\Adobe PCD\cache on Windows). Other users have reported this problem. And of course make sure your system actually supports all Extended features so they are accessible, meaning your graphics hardware and configuration must be up to speed to use 3D and otehr features...
Mylenium

Iphoto did not upgrade or open

After I installed Leopard, the iphoto begins to boot, but then crashes. It seems that it did not upgrade the old iphoto. Isn't iphoto included in 10.5 ? Can any body help? i still have the original iphoto (filled with pictures) that came with this computer which had MacOs 10.28. I cannot get it to open.
Thanks

I have the same issue, iPhoto launches, but then does not respond. I have iPhoto version 4.0.3
I also had some issues with Dashboard not working (I upgraded from 10.3.9) except for one lone widget. I did a reinstall (Archive and install) and that fixed some issues, but iPhoto still does not work.
One other thing, I have multiple users on the computer, and mine (Admin) launches with Mail showing, even with the Hide option checked. My wife's launches with Mail hidden (also checked). Have tried changing settings, removing from the launch list, rebooting, then adding it again, no change.
Any suggestions?

Upgrade from SQL 2K8 R2 to SQL 2K12 did not upgrade SSRS

I upgraded a SQL 2K8 R2 SP2 SQL Server which also had an instance of SSRS on it. Everything went fine with the database engine upgrade, however SSRS did not get upgraded. Upgrade advisor did not report any issues which would have blocked installation.
If I try to run the upgrade wizard again, it does not show SSRS as something that can be upgraded. Any thoughts or ideas on how I should proceed?

Hi KHLLC,
Are you sure RS did not upgrade? If in Native mode, you can check the versions of the binaries in the program files folder ..\Reporting Services\ReportServer\bin to see if any of the binaries were upgraded to the SP2 versions.
If you are in SharePoint mode, you also need to run the RS SharePoint add-in for SP2. This link might help.
http://technet.microsoft.com/en-us/library/aa905871.aspx
Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.

Someone to know ¿why my IPod touch (32gb) did not upgrade to IOS 7 ?

osomeone to know ¿why my Ipod touch (32GB) did not upgrade from IOS 6.1.5 to IOS 7 ?

The fourth generation iPod touches can't be updated past 6.1.5.
(97033)

Quick Time 7 did not upgrade to Pro after entering registration

Quick Time 7 did not upgrade to Quick Time Pro after entering in registration code.

Yes, the word Pro was removed. Being new to Quick Time I was expecting the app itself to be renamed Quick Time Pro. Looking at the menus late last night I figured out that pro features are all already in Quick Time just deactivated. Thanks for your response.

R12 Ebtax upgrade- did not upgrade the Tax Jurisdictions

we have upgraded from 11.5.10.2 to 12.1.1.1 . The setup has been migrated to R12 Ebtax
But Dont see the tax Jurisdiction created at all ? why the system did not automatically create the Jurisdiction like it created the other components of Tax Configuration. How does this impact
I see a note 460059.1 on metalink but there is no error as such when creating manual invoices. the tax calcutates fine.
I have done a fresh tax set up in my previous project where creation of Jurisdiction ws mandatory for the subsequest ebtax setup

ernestokolie wrote:
... downloaded the yosemite fully (5.17GB) but the upgrade did not happened, the os remains the same. . .
The upgrade doesn't simply happen. The Yosemite installer is downloaded to your Applications folder and normally it starts but then waits for you to begin the actual installation. Look in your Applications folder for the installer, double click on it and follow the instructions. Note that when the installation is finished, the installer deletes itself. If you want to keep it for future use, duplicate it first.

Upgrading from pages 09, I have upgraded to OSX yosemite but my 09 pages did not upgrade

I have been trying to upgradefrom pages 09, I have upgraded to OSX yosemite but my 09 pages did not upgrade

You will need to upgrade Pages separately from the App Store.

TOOK MY MONEY BUT DID NOT UPGRADE

I WAS TRYING TO UPGRADE MY ACCOUNT TO A STUDEN PREMIUM ACCOUNT SO I ENTERED IN MY CREDIT CARD INFORMATON WHICH I DO NOT SAVE INTO THE SITE THEN I HAD TO ENTER IN MY STUDENT INFORMATION ONLY TO FIND OUT STUPID SPOTIFY DOES NOT DO VERIFICATION BY COLLEGE EMAIL BUT SOME OTHER CRAPPY WAY! MY COLLEGE WAS NOT LISTED AND IT IS THE SUMMER SO I DO NOT HAVE INFORMATION TO USE TO VERIFY I AM A COLLEGE STUDENT NOR DOES MY COLLEGE ID HAVE A DATE ON IT. SO DO TO THIS I DID NOT FINISH MY SIGN UP BUT SPOTIFY STILL TOOK MONEY OUT OF MY ACCOUNT! SINCE I DID NOT GET A RECIEPT OR CONFIRMATION CUSTOMER SERVICE IS TELLING ME THEY DID NOT TAKE MONEY OUT OF MY ACCOUNT. THIS IS NOT TRUE! AND FOR THEM TO SAY THEY DID NOT TAKE MY MONEY IS DISGUSTING. THE PROOF IS MY BANK STATEMENT!!!!! JUST BECAUSE YOU DIDN'T SEND ME A RECIEPT DOES NOT MEAN YOU DID NOT TAKE MONEY FROM ME IN THE FIRST PLACE. THEN THEY ARE BLAMING ME SAYING I MUST HAVE ANOTHER ACCOUNT! NO I DO NOT! I SIGN IN WITH FACEBOOK ONLY. IF I DO NOT GET MY MONEY BACK I WILL BE EXTREMELY PISSED OFF. YOU WOULD THINK THE LEAST THEY WOULD DO IS BE LIKE WELL IF YOU PAID LET US UPGRADE YOU. I WANT MY MONEY BACK!

Hi I'm sure we can sort out what's happened here. What date was the charge for how much? You don't have a recent charge on the account you're contacting us with.
This means you might have a second account with us. Please respond to that case you have open with us listing all email addresses you may have registered an account with. I'm sure our team can continue helping from there, thanks!

What happened to my User folder? Now there is a default.migrated folder instead. I did not upgrade from W7. Always had W8.

Is my User folder gone? I have no idea what happened to it. Is it possible that a virus has redirected the folder or has placed it somewhere else for access? I have not upgraded from W7. W8 is the factory installed OS on my system. Any thoughts on
what happened?

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

I did NOT upgrade my 4s to iOS6 and I don't seem to have any problems at all

Seriously, why is anyone still upgrading after all the crap that's been documented by so many others that have? I really feel for those that did upgrade in the first 12 hours however it's those impatient ones that I count on tell me that upgrading has been a nightmare thus ... god forbid ... I wait until it's straightened out a bit before I upgrade. Maybe a month or two for 6.0.1.
It's really interesting that while iOS6 seems to be fairly broken with Maps and nonexistant with UTube - "There's an App for that" for the fix. Kind of ironic.
Carry on.

First man up and admit, that itunes does not suggest, but tells you that update is available and you made a
decision to download and update. Once you man up - think if you still under warranty. If that is not security
software according to the link provided, it is hardware. So second try another network, may be your network
has additional security or firewall. And third decide if it worth to you pay 149 for that phone or get it replaced.
Unless your 3gs under warranty.

Firefox crashed and will not open again, I did not upgrade to 5.0 - is a mac 10.7 Please tell me how to fix this and I don't want complicted.

my computer upgraded from 3.6 to 5 and crashed and will not now open any pages with firefox. I have tried to reinstall many times with same result. What is the problem? I do not beleive I am alone in this. I had not idea that the upgrade occured on the 15th of June but it opened on the a.m of the 28th and then shut down immediately and will not access my home page or any other page again.

Try going to the Tools menu item, and choose Options.
In the popup, select the Advanced screen (cog icon) and under that, the Update sub-tab. On that tab, uncheck the various boxes for checking for updates, and see if that helps?

Infotype Additions did not upgrade to ERP2004

Similar Messages

Maybe you are looking for