Infotype Creation - Writing logic in MPP program.

Hello Guru's,
I dont know much about Module pool programming. I created a infotype with subtypes. And now I have to check various conditions and Validations ( Field level and Screen level). And list screen is also there.
i. Age, Service calculation.
ii. Getting some wage types from infotype 0008 and adding it.
iii. Field level validations like checking the entered amount r date in the screen, just after entering the value in the screen field.
like different things. Please tell me in detail, incense which logic we have to write and where we have to write ( which program (MP999100, MP999110,20, 30) screen and which event like PBO, PAI) in detail please.
Thanks in advance.

To handle all the validations:
In the PAI event.
Chain.
create a module for your validations and handle all ur validations in that module.
endchain.
Regards,
Kiran

Similar Messages

Creation of logical index terminated. Join index create error.

Hi to all,
After running for a few weeks fine. See my earlier message Delete and recreate BWA index of a cube in process chain.
Chains are "terminating" again. I get the following error messages:
Creation of logical index '[Technical Cube_name]' terminated. Error text:
Join index create error;index=bwp_[technical cube_name],location
=nlscli63:30203 2433
Creation of BIA index for InfoCube '[Technical Cube_name]' terminated during activation
A manual deletion by the program RSDDTREX_INDEX_DELETE and a recreation in RSDDV is necessarry to get the index active.
Has anyone a clue on beforehand what is happening or same experiences, before i put in a SAP OSS message.
Regards,
René

Hi
Firstly please ensure that no error exists for the cube when you are
trying to create the index. You can check that in RSRV. Also you need
to check if no change run or loading is occuring.
Please also check that you are not using the backup mode mutual
as this can cause the problem, please refer to the SAP note 1383228.
Best Regards,
Des Gallagher

Has the NVidia GeForce 8600M GT logic board replacement program been extended by a year?

I have heard that the logic board replacement program for MacBooks Pro with the failed NVidia 8600M GT chip has been extended from 3 to 4 years after the date of original purchase. However, a local AASP had no knowledge of such an extension. Is this true? I have a MacBook Pro 17" 2.6GHz that was purchased in 2008.

eww wrote:
when you took it in, it had been more than four years since your 2007 machine was originally sold, that's why you got the response you did.
Actually it was within the time frame, it felt like it was just last month, when it was like several months ago.
Just dragged the 15" recently out to see to use it for testing *cough* and low and behold it's worthless now.
The problem I have is I told them at the Genius Bar the video was going, but couldn't prove it as it was very rare it occured.
But they ran their little tests and gave me a load of crap, now it's dead. $2500 down the toilet.
I know what did it, Lion. Lion was the cause, it ran like a fine machine under Snow, fscking Lion, I'm glad I didn't put that POS on my new 17"
http://reviews.cnet.com/8301-13727_7-20091204-263/graphics-issues-plaguing-os-x- 10.7-lion-upgrades/
My word the OP, don't let the Genius Bar screw you with the same crap they gave me, call corporate and raise ****!

Error while writing to file: C: \ Program Files (x86) \ iTunes \ iTunes.Resources \ el.Iproj \ iTunesExtrasDownload.png. Make sure you have access to this directory.

When i try to install iTunes in my Windows 7, this error message apear "Error while writing to file: C: \ Program Files (x86) \ iTunes \ iTunes.Resources \ el.Iproj \ iTunesExtrasDownload.png. Make sure you have access to this directory." Someone help me!!

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2

Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."

Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Creation of logical file path

hi, i am very new to this field and i need this urgently.. please help..
i am not able to create a physical file from a logical file say for eg "zlogic".. i have been given a certain "Pathintern" for the physical file.. e.g. Pathintern = zobj.. the syntax group is 'unix' but, what do i fill in the physical path.. and i also have used the function module file_get_name but i dont know the changes to be made in the function module.. please help..

Sorsingh,
try this search result (are you new to the search field?).
[SAP: creation of logical file path|http://www.google.co.jp/search?hl=en&q=SAP%3Acreationoflogicalfile+path&btnG=Search&aq=f&oq=]
Let us know which part of the online help you can not understand.
Regards,
Clemens

Creation of Logical Standby Database Using RMAN ACTIVE DATABASE COMMAND

Hi All,
I am in confusion how to create logical standby database from primary database using rman active database command.
What i did:-
Create primary database on machine 1 on RHEL 5 with Oracle 11gR2
Create standby database on machine 2 on RHEL 5 With Oracle 11gR2 from primary using RMAN active database command
Trying to create logical standby database on machine 3 on RHEL 5 with Oracle 11gR2 using RMAN active database command from primary.
The point which confuse me is to start the logical standby in nomount mode on machine 3 with which pfile like i create the pfile for standby database do i need to create the pfile for logical standby db.
I done the creation of logical standby database by converting physical standby to logical standby database
I am following the below mentioned doc for the same:
Creating a physical and a logical standby database in a DR environment | Chen Guang&#039;s Blog
Kindly guide me how to work over the same or please provide me the steps of the same.
Thanks in advance.

Thanks for your reply
I already started the logical standby database with pfile in nomount mode. And successfully completed the duplication of database. by mentioning the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT parameter.
But i am not able to receive the logs on the above mentioned blog i run the sql command to check the logs but getting "no rows selected"
My primary database pfile is:
pc01prmy.__db_cache_size=83886080
pc01prmy.__java_pool_size=12582912
pc01prmy.__large_pool_size=4194304
pc01prmy.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
pc01prmy.__pga_aggregate_target=79691776
pc01prmy.__sga_target=239075328
pc01prmy.__shared_io_pool_size=0
pc01prmy.__shared_pool_size=134217728
pc01prmy.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/pc01prmy/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/PC01PRMY/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01PRMY/controlfile/o1_mf_91g3mf6v_.ctl'
*.db_block_size=8192
*.db_create_file_dest='/u01/app/oracle/oradata'
*.db_domain=''
*.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
*.db_name='pc01prmy'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
*.fal_client='PC01PRMY'
*.fal_server='PC01SBY'
*.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
*.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
*.log_archive_dest_2='SERVICE=pc01sby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=pc01sby'
*.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='DEFER'
*.log_archive_dest_state_3='DEFER'
*.log_archive_max_processes=30
*.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
*.open_cursors=300
*.pga_aggregate_target=78643200
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=236978176
*.undo_tablespace='UNDOTBS1'
My logical standby pfile is:-
pc01ls.__db_cache_size=92274688
pc01ls.__java_pool_size=12582912
pc01ls.__large_pool_size=4194304
pc01ls.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
pc01ls.__pga_aggregate_target=79691776
pc01ls.__sga_target=239075328
pc01ls.__shared_io_pool_size=0
pc01ls.__shared_pool_size=125829120
pc01ls.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/pc01ls/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/PC01LS/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01LS/controlfile/o1_mf_91g3mf6v_.ctl'
*.db_block_size=8192
*.db_create_file_dest='/u01/app/oracle/oradata'
*.db_domain=''
*.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
*.db_name='pc01prmy'
*.db_unique_name='pc01ls'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
*.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
*.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
*.log_archive_dest_2='LOCATION=/u01/app/oracle/flash_recovery_area/PC01LS/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
*.open_cursors=300
*.pga_aggregate_target=78643200
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=236978176
*.undo_tablespace='UNDOTBS1'
Kindly advice over the same

I have downloades Logic Pro 9 onto my older modfel Mac Book Pro 1,1 with OS 10.6.8 and 2 GB RAM, according to the rquirements for Logic 9. the program should run, but it won't open. Is my configutation too slow?

I have downloades Logic Pro 9 onto my older modfel Mac Book Pro 1,1 with OS 10.6.8 and 2 GB RAM, according to the rquirements for Logic 9. the program should run on OS 10.6.8. with 2 GB RAM, 4 GB better, but it won't open. Is my configutation too slow?

Looks as if you're just at the minimum specs - http://www.apple.com/logicpro/specs/. Says 2GB minimum, 4GB recommended. And 2GB of RAM is all the RAM the 1,1 can handle. If I were you I would call Apple's App Store service center - you have the minimum requirements, as I read it, but perhaps you need a faster processor?
I had a 1,1 but sold it when I bought my late 2011 in March of this year - maybe it's time to look at a new machine?
Clinton

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Add new field infotype "z" in logical database selection screen pnp

Can add new field infotype "z" in logical database selection screen pnp
I could explain how to realize
Thanks

In case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
"Allocation operative area to optional delimiter
IF NOT p_aroper IS INITIAL.
    DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
          wa_texpr TYPE rsds_expr,
          lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
          wa_rsds_expr_tab LIKE rsdsexpr.
    REFRESH lt_rsds_expr_tab.
    wa_rsds_expr_tab-arity = '0'.
    wa_rsds_expr_tab-fieldname = 'OBJID'.
    wa_rsds_expr_tab-option = 'EQ'.
    wa_rsds_expr_tab-low = p_aroper.
    wa_rsds_expr_tab-high = '00000000'.
    MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
    APPEND lt_rsds_expr_tab.
    REFRESH lt_texpr.
    wa_texpr-tablename = 'PA9004'.
    wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
    MOVE-CORRESPONDING wa_texpr TO lt_texpr.
    APPEND lt_texpr.
pnpdynse[] = lt_texpr[].
ENDIF.
English is the forum language.
Edited by: Rob Burbank on May 18, 2011 11:41 AM

I am getting an error writing to file: C:\Program Files\iTunes\iTunes Resouirces\pl.lproj\AppletVStream.nib\objects.xib. Verify that you have Access to that directory.

has anyone else gotten this type of message? Just got an ipad and realized our itunes is not working. I think when the most recent version was being installed, it got interrupted.
Thanks

I am getting an error writing to file: C:\Program Files\iTunes\iTunes Resouirces\pl.lproj\AppletVStream.nib\objects.xib. Verify that you have Access to that directory.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Error writing to file: C:\Program Files\iPod\Acknowledgements.rtf verify that you have access to that directory

error writing to file: C:\Program Files\iPod\Acknowledgements.rtf Verify that you have access to that directory
How do I go about doing this?

*I'd be happy if I could reinstall iTunes 7.3. Does Apple make older versions of iTunes available for download? I haven't been able to find them.*
You'll get various earlier versions of iTunes including 7.3 here: Old iTunes for Windows

Creation of logical port

hi,
Can any one tell us creation of logical port for publishing a webservice.
While creating we are facing following exception:
SRT Framework exception: Initial value "operation table" in method IF_SRT_WSP_SUBJECT_CONTEXT~IS_COMPATIBLE_TO_PROXY_ of class CL_SRT_WSP_SUBJECT_CONTEXT
While testing with web navigater it is working fine

Mr. Snehasish Das
Thanks for your reply.
Actually we are trying to create a web service using BAPI. We have created the webserive and tested the WSDL in SOAmanager. It is working fine.
And when we are trying create a logical port for CO_ESREGISTRY_WSSI in SOAmanager to publish the webservice we are getting the following error.
SRT Framework exception: Initial value "operation table" in method IF_SRT_WSP_SUBJECT_CONTEXT~IS_COMPATIBLE_TO_PROXY_ of class CL_SRT_WSP_SUBJECT_CONTEXT
We had specified the Open porttype WSDL document in URL for WSDL Access

Infotype Creation - Writing logic in MPP program.

Similar Messages

Maybe you are looking for