Infotype log audit S_AHR_61016380

Hi Experts,
I am using S_AHR_61016380 report to trcak infotype changes. But on execution no data is displayed.
Do I have to mke some specific selections?
Thankls
Aryan

Hi Aryan,
Did you have to make any changes to the system? How did you get it to work? I am facing a similar situation where all the settings are correct but the report is not showing changes other than Infotype 0 and 1. Changes for other such as 2, 6, 8 etc are not showing up on the report.
Thank you
Amina
Edited by: Amina Anjum on Mar 11, 2010 11:10 AM

Similar Messages

Infotype Log Activation -

Hi Guys
I would like to know if there is any way by which the Infotype Logs can be activated country wise? My main requiremnet is to enable them country wise and not for all country. Please let me know how to take care of this ?

Hi,
Program Name: - RPUAUD00
For better control in future you can activate the audit log.
You should activate the audit log for better control in future.
To activate the audit log
1) T.Code u201CSM30u201D and maintain the tables with respective values A) V_T585A, B) V_T585B, C) V_T585C.
2) Change the infotype which is maintained in last step.
3) Run T.Code u201CS_AHR_61016380u201D and tick respective check box.
You will get audit log. In this log you can check u201CUser IDu201D who changed the record, date & time, old record and new record values.
But you need to do some configuration .....
SPRO-PM-PA-Tools-Revision-setup change document
SPRO-PM-PA-Tools-Revision-log report starts ( you need to add these to the exist table here RPUPROTD and RPUPROTU).
Then run your T.code directly
S_AHR_61016381 - Log of Report Starts
S_AHR_61016380 - Logged Changes in Infotype Data
Regards,
Prasad Lad

Tcode for Infotype log in Personnel Administration

Tcode for Infotype log in Personnel Administration

Hi Santhosh
as shared by our mates,for audit trail u can check this
To track the changes in the SAP HR system we have the SAP standard report for that.
Log report: RPUAUD00
Please do the entries in the below table to activate the log report:
V_T585A
V_T585B
V_T585C
ABAP programs RSTBHIST or RSVTPROT can be used to analyze table changes
Thanks to the contrbutors -Audit Trail is used to track the record changes
http://saperphcm.blogspot.com/2010/07/audit-trail-is-used-to-track-record.html
No Worries
KG

OM Infotype Log

Hello Folks,
I just want to know is there any standard program/process to capture the OM Infotype log or is there any way to capture the OM Log through custom program like we have RPUAUD00 for PA Infotypes.
Thanks & Regards,
Nishanth Kumar.

Hi friend
Please check the below programs.
Go to SA38, RHCDOC_DISPLAY and execute
Try this program too RHRHAZ00
Regards
Santhosh.S

Infotype Logging on IT0000 - BEGDA not avalibale

Hi all,
I have been using infotype logging since a very long time. I noticed a peculiar thing which I had not before, since I never had this requirement.
Infotype logging does not allow logging to be performed on BEGDA ( in T585B table ) . Becuase of this, I am facing a peculiar issue.
If an employee is performed the same action(MASSN) with the same reason for action(MASSG) with different begin dates(BEGDAs) it does not get logged. A PERNR who gets promoted twice in a year will not have this recorded in IT0000 since everything except BEGDA remains the same to his prior record and IT logging cannot be done on BEGDA changes.
For example - this are the records in IT0000 for an employee
PERNR          MASSN           MASSG          BEGDA
1) 00010000    Z1                      01                  03/01/2009
2) 00010000    Z2                      01                  03/01/2010
3) 00010000    Z2                      01                  08/01/2010
Z1 - new hire                01 - new position
Z2 - Position change   - 01 Promotion
Infotype LOGS for IT0000
Record 1 and 2 appear in the logs. Record 3 does not get logged since record 2 and 3 are the same except for BEGDA. And since BEGDA is not available for logging, BEGDA Changes are not considered for logging.
has anyone faced this issue earlier
regards
Raj Jogam
Raj Jogam

Hi,
Please check OSS Note 44206.
Hope this helps.
Donnie

Error during netlist generation and log audit trail error

I am not able to run the simulation application on my Multisim 10. The two following error were generated every time I try to run the simultion:
Error: log /Audit Trail, C: \document~1\xxx: Permission denied
Error during netlist generation, C:\document~1\xxx: Permision denied
Can any body help me fix this problem that make it impossible for me to use the Multisim10 simualtion tool?

There are two KBs I would like for you to see, since they might have the answer to the problem you are having:
1. This KB is related to having access to the TEMP directories where Multisim stores temp files for simulation:
http://digital.ni.com/public.nsf/allkb/15526EB2464F3EDD8625722C00696BB0
2. This other KB deals with non-Administrator users of Windows, it talks about v9 but the idea is the same for v10, just look for the v10 installation paths:
http://digital.ni.com/public.nsf/allkb/0DF597C217A235BE862571FB004F24BD
Nestor
National Instruments

Data Access Service is unable to log audit events to the security event log

Hi,
Scenario: SCOM 2012 R2 UR4. (Windows 2012 R2)
Today SCOM have generated 4 alerts Data Access Service is unable to log audit events to the security event log.
The service account for "System Center Data Access Service" service is "Local System".
The users at "Generate security audits" are: LOCAL SERVICE and NETWORK SERVICE.
The question is:
how to resolve this alert? (Where look for to obtain more information to resolve this problem)
Thanks in advance!

Local system account is differet to local service account. Fo detail description of these accounts, pls. refer
LocalService Account
http://msdn.microsoft.com/en-us/library/windows/desktop/ms684188(v=vs.85).aspx
LocalSystem Account
http://msdn.microsoft.com/en-us/library/windows/desktop/ms684190(v=vs.85).aspx
Generate security audits which is under Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment of Group policy, determines which accounts can be used by a process to add entries to the security log. This user right
is defined in the Default Domain Controller Group Policy object (GPO) and in the local security policy of workstations and servers. By default, only the LocalSystem account has the privilege to be used by processes to generate security audits.
For identified the SDK account
1) open services.msc
2) From the system Center Data Access Service, you can see the SDK logon on as account
Roger

Infotype Log Report

Dear Experts,
1. I want a STd Report where we can get Infotype Created date, Created ID/Personnel no,Created Time and date in Same report.
2.Same for Chenged details Also.
But the problem is in T.Code- S_AHR_61016380 we are able to see ony changed details not created ones. we want both seperate reports.
Alsoi have used RPRAPA00 but no use. please reply soon.
Thanks in Advance.
Regards,
R.Mythili
***No CAPS For the description of the Subject Please it has been changed ***

Hi,
Not sure why you think that the Logged Changes in Infotype Data report (RPUAUD00 - Trans Act S_AHR_61016380 ) does not give you the created information. If a newly created infotype, the "old" data will be blank and the new data displayed. Same with changed data - old in left column and new on right. Date, time and person who changed the data are given.
You said you wanted a standard report and Logged Changes is it, but if you want to create your own, add the fields AEDTM and UNAME to each infotype in any custom Infosets via SQ02. You can then report on all infotypes as to who changed the data and when. Select on a range of dates and you can see the old information and new information for the selected infotypes.
Paul

Infotype 7 audit trail

Can anyone tell me where to change the actions that are going to the audit log for an infotype? I am reading the audit log for infotypes IT07 and IT08. All changes and inserts are being returned, but only the IT08 is returning deleted records. IT07 deleted records are not going into the log.

I found the answer. If a document-relevant field has not been changed, no audit reocrd is created. No audit record is created for a newly created record either.

HR infotype log in PCL4 and overall performance

Hi there,
There has been a few threads about PCL4 performance with regards to reading, but I have a slightly different question:
We are working on an export program for HR masterdata and are considering using logging in PCL4 to be able to export only changed fields in the infotypes. To achieve this we need to add quite alot of extra fields and infotypes to the configuration in the IMG.
Does anyone have any experience about how additional fields and infotypes affect runtime and database performance of the system? How optimized is the system with regards to writing to this cluster?
It will obviously cause more data to be logged, and the database will grow slightly faster, but does it decrease responsiveness of PA30/40 for the end users? Is it possible to archive old data from this cluster? I'm guessing that it won't be a big problem, but any feedback is greatly appreciated.
Best regards,
Lars G. Gudbrandsen

Hi Lars,
Probably you would get a better response in the HCM section as opposed to ABAP.
Maybe you can use change pointers, and badis rather, to acheive what you want but I am not 100% sure the requirement.
Additional fields and infotypes don't impact the system negatively in my opinion. It wouldn't affect PA30, unless the specific infotype is selected and then provided if it has been correctly created in PM01 it should be fine, also depending how many fields you are talking about of course. PA40 would only be impacted for those transacitons for which the infotype is included.
As for archiving, I am not sure, but once again i think HCM forum is your best bet.

Change log report S_AHR_61016380 not picking IT0025

Hi Experts,
I need the change log report to capture the details of changes made in IT0025 (Appraisals).
I have made necessary configurations to the below tables by watching in other SDN threads, but still my problem is not solved.
Also made changes to master data (IT0025) and tested, but still no use.
Log report is not picking changes made to IT0025.
Please suggest
Thanks
Venkatesh

Dear Expert,
for logged changes in infotype report we need to install crystal report.
please suggest.

Job log, audit log

Hi.
Are there any log files to delete manually periodic?
I know the log files are deleted by standard delete job scheduled in Tr-cd SM36.
How about the JOB log, and audit log?
regards,

Apart from SM36 standard logs,
you might want to re-orgnaize log/trace files in various directories:
/local/data/interface - generally the interface directory
/usr/sap/<SID>/../work - Work process trace files etc.
Regards,
Siddhesh

How to change the Time Zone in OAM log & audit files

Hi All,
I have OAM installed with all components. By default it is using the UTC Time Zone in the log files and Audit files.
Could any one please tell me how to change the Time according to the place ?
It is an urgent plzzz.
Thanks & Regards,
Vaasu.

could you find how to change the tine zone. i am also getting this problem
thanks

Infotype Logging

Hi masters!
Well, first of all I´m a Basis guy but I´m having a problem here regarding some infotypes to be registered. Well, actually I would like to know how could I start doing this since I have no ideia and they told me to make this task ´cause there is nobody else. Second, and the most importart for me, is there any kind of performance impact once I register those infotypes?
By the way, here they are:
0000     Actions
0001     Organizational Assignment
0002     Personal Data
0006     Addresses
0007     Planned Working Time
0008     Basic Pay
0009     Bank Details
0014     Recurring Payments/Deductions
0015     Additional Payments
0016     Contract Elements
0041     Date Specifications
0071     Pension Funds GB
0105     Communication
0171     General Benefits Information
2001     Absences
2006     Absence Quotas
I don´t really wanna impose, but I´d really appreciate if you give a hand with that. Thank you very much in advance!!
Bye

V_t585A, V_t585b and v_t585C are the tables to maintain the logs.
use report RPUAD00 to view the logs.
Also there is performance issue therefore rather than logging the entire infotype decide which fields need to be logged and maintain the same accordingly.
Regards,
Divya

Portal ESS use log / audit / control

Hi all.
Is there any way to have a log of all the changes the user does on their own personal data?? A registry for each change of familiar data, bank information... Any change done through the ESS...
Do you know anything about that??

Can´t find the way to use them accurately...
Security Audit seems to fits more to my goal, but far from it yet.
I need to find something I can show to the user like:
User: ess001
Change: Name = Roberw => Robert
The Security Audit seems very technical and shows the RFCs called, but not the content modified or anything like that...
Is what I want possible?? Does exist anything like I need??
Thanks.

Infotype log audit S_AHR_61016380

Similar Messages

Maybe you are looking for