Infotype log details

Hi Experts..........
     Here I have a custom Infotype.... for which some fields are not present in Development where as in Quality I can find all those fields....
     I need a report which gives all the changes that have been made to that Custom Infotype table. Could anyone of you can help me....
  Thanking you in advance...
Regards,

Go to PM01 in the Devloment server and check in Edit structure
What are teh fields available ?
Go to PM01 in the Quality  server and check in Edit structure
What are teh fields available ?
If there is really difference in structure field. If you creating the infotype double check that yoiu have done changes directly to quality rathere than or Dev.
Otherwise ask your BASIS peroon to check who made changes to strucure on which logon changes has made.
It is not possible to have different field untill some one created
Best Regards

Similar Messages

  • Not able to get the Aduit log details through webservices

    Hi Team,
    I am trying to get the audit log details using according to Michal's PO/PI tips: Audit Logs from a native WS - new feature  but i am getting following result 
    i have used
    key = new MessageKey(msg.getMessageId(), msg.getMessageDirection()); -------------> to generate the message key
    generated value: 02766515-d1fe-11e3-b52d-0000008030fe(OUTBOUND)
    and i have placed that value in the messagekey as shown above but i am not getting any output and it is returned saying fault String please some buddy help me in solving the problem.
    Thanks in advance.
    Regards,
    Avinash.

    If it just for a particular message then another simple solution is to open the message and go to details in pimon.
    http://wiki.scn.sap.com/wiki/display/PIS/AdapterMessageMonitoringVi+service+and+it%27s+methods

  • My i phone 4 i want call log detail minimum one month stor  , now onle 2-3 days receord possible so hot to increse memory , other wise which add i use please halp me , thanks

    hello i like i phone but two think i want must call two way recording , and call log memory more now only call log 2-3 days receord have memrory , samsung have all most month log detail , resanty detail means , please halp me how to increse resant log detail increse memory ,
    kamlesh
    <Email Edited By Host>

    NO LUCK!!
    THANKS SO MUCH FOR TRYING TO HELP!
    I ASKED ONE OF THE MANY EMPLOYEES @ VERIZON IF THEY HAD MUCH TROUBLE OUT OF THIS PHONE HE SAID NO NOT AT ALL!!!! I REALLY JUST WANT A PHONE THAT WORKS I HAVE BEEN A VERIZON CUSTOMER FOR A LONG TIME NOW. THIS IS BY FAR THE WORST PHONE & SERVICE I HAVE EVERY RECEIVED FROM THEM. I GUESS THE SERVICE IS GOOD WHEN YOU DON'T NEED THEM. NOW THAT I NEED THEM I HATE THEM ! NO HELP FROM THEM @ ALL. I WISH THEY COULD JUST FIX IT OR LET ME PAY THE DIFFERANCE FOR A NEW PHONE  . IAM NOT ASKING FOR ANYTHING FREE. I JUST WANT WHAT I PAID FOR!!!!!! I SHOULD HAVE REPLACED IT WITH IN THE 1ST MONTH WHEN IT ALL STARTED BUT HATED TO TAKE IT BACK IF IT WAS SOMETHING I WAS DOING WRONG ! I FEEL I HAVE SUFFERED ENOUGH!!!!!!!!!!!!!
    VERY MAD @ VERIZON , 1ST TIME I WOULD SEND PEOPLE AWAY FROM THEM , MY HUSBAND HAS IPHONE WITH AT&T , HE TRIED TO GET ME TO MOVE TO THEM .I WISH I WOULD HAVE NOW!!  I CAN'T THINK OF ANYTIME I GOT SERVICE COVERAGE & HE DIDN'T . SO IS IT THE PHONE OR JUST BAD SERVICE ????? IF THEY WOULD LET ME OUT OF MY CONTRACT I WOULD LEAVE NOW ....

  • How to add log details for marketing attributes

    Hi,
    when user is changing marketing attributes in bp transaction we need to show the log details in log file.how to capture the change log details in to log file ? is there any way to show change log files.
    rose

    Hi,
    You can view the change log using the report program:CRM_MKT_TOOLS or T-cd:CRMD_MKT_TOOLS. Choose 'History of attribute Evaluation for Business Partners'.
    You can manipulate this report and get the necessary log.
    This BADI CACL_VAL_CHANGE will be called after any change to the marketing attribute.
    Here you can capture the log to your custom table / you can log the data to a file.
    Hope this helps.
    Regards,
    Senthil.

  • Authorization-Infotype Bank details

    Hi All,
    While changing infotype 0009-Bank Details, we are facing the authorization missing for SAPDBPNP.
    Please throw some light on why this would be needed to modify infotype bank details.
    Thank you.
    Regards.
    Nishy

    Hi,
    This is releated to your authorization issue because PNP is the Logical Data Base. Take a screen shot of su53 and discuss with your basis team.
    Thanks,
    Dora.

  • To change the Job Log Detail in SM37

    Hi All,
    How can I change the standard JOB LOG detail in SM37 for partical program if it runs in Background.I have foumd the Function Module(BP_JOBLOG_READ) which is used to update this JOB LOG detail.How can I edit the standard .
    Kindly provide the ways .
    With Thanks,
    Dina.

    Hi ,
    Thank you for replying.
    I want to update some rows in JOB LOG detail .
    With Thanks,
    Dina.

  • OM Infotype Log

    Hello Folks,
    I just want to know is there any standard program/process to capture the OM Infotype log or is there any way to capture the OM Log through custom program like we have RPUAUD00 for PA Infotypes.
    Thanks & Regards,
    Nishanth Kumar.

    Hi friend
    Please check the below programs.
    Go to SA38, RHCDOC_DISPLAY and execute
    Try this program too RHRHAZ00
    Regards
    Santhosh.S

  • Infotype Logging on IT0000 - BEGDA not avalibale

    Hi all,
    I have been using infotype logging since a very long time. I noticed a peculiar thing which I had not before, since I never had this requirement.
    Infotype logging does not allow logging to be performed on BEGDA ( in T585B table ) . Becuase of this, I am facing a peculiar issue.
    If an employee is performed the same action(MASSN)  with the same reason for action(MASSG) with different begin dates(BEGDAs) it does not get logged. A PERNR who gets promoted twice in a year will not have this recorded in IT0000 since everything except BEGDA remains the same to his prior record and IT logging cannot be done  on BEGDA changes.
    For example - this are the records in IT0000 for an employee
    PERNR          MASSN           MASSG          BEGDA
    1) 00010000    Z1                      01                  03/01/2009
    2) 00010000    Z2                      01                  03/01/2010
    3) 00010000    Z2                      01                  08/01/2010
    Z1  - new hire                01 - new position
    Z2 - Position change   -  01 Promotion
    Infotype  LOGS  for IT0000
    Record 1 and 2 appear in the logs. Record 3 does not get logged  since record 2 and 3 are the same except for BEGDA. And since BEGDA is not available for logging, BEGDA Changes are not considered for logging.
    has anyone faced this issue earlier
    regards
    Raj Jogam
    Raj Jogam

    Hi,
    Please check OSS Note 44206.
    Hope this helps.
    Donnie

  • Tcode for Infotype log in Personnel Administration

    Tcode for Infotype log in Personnel Administration

    Hi Santhosh
    as shared by our mates,for audit trail u can check this
    To track the changes in the SAP HR system we have the SAP standard report for that.
    Log report: RPUAUD00
    Please do the entries in the below table to activate the log report:
    V_T585A
    V_T585B
    V_T585C
    ABAP programs RSTBHIST or RSVTPROT can be used to analyze table changes
    Thanks to the contrbutors -Audit Trail is used to track the record changes
    http://saperphcm.blogspot.com/2010/07/audit-trail-is-used-to-track-record.html
    No Worries
    KG

  • Infotype Log Activation -

    Hi Guys
    I would like to know if there is any way by which the Infotype Logs can be activated country wise? My main requiremnet is to enable them country wise and not for all country. Please let me know how to take care of this ?

    Hi,
    Program Name: - RPUAUD00
    For better control in future you can activate the audit log.
    You should activate the audit log for better control in future.
    To activate the audit log
    1) T.Code u201CSM30u201D and maintain the tables with respective values A) V_T585A, B) V_T585B, C) V_T585C.
    2) Change the infotype which is maintained in last step.
    3) Run T.Code u201CS_AHR_61016380u201D and tick respective check box.
    You will get audit log. In this log you can check u201CUser IDu201D who changed the record, date & time, old record and new record values.
    But you need to do some configuration .....
    SPRO-PM-PA-Tools-Revision-setup change document
    SPRO-PM-PA-Tools-Revision-log report starts ( you need to add these to the exist table here RPUPROTD and RPUPROTU).
    Then run your T.code directly
    S_AHR_61016381 - Log of Report Starts
    S_AHR_61016380 - Logged Changes in Infotype Data
    Regards,
    Prasad Lad

  • Table -- log detail for std cost estimate material

    Dear experts,
    In which table the standard cost estimate log details will be stored? for ex: warning / error messages
    Our client wants to develop customized ALV report for to show consolidate list (instead to check 1 by 1).
    plz help me.
    Regards
    Sankaran

    Hi,
    Please use Table CMFK and CMFP for this.
    Thanks,
    Pawan Kumar

  • Change Log Details for the Planning Profiles in CRM

    Hi All,
    We are getting the Planning data from CRM Planning Profiles into BW BPS - 0CRM_C01 Real Time InfoCube.
    The Users got a new requirement and they need the following additional details:
    1. User who modified the amount in a particular Planning Profile.
    2. Date and Time when the Planning Amount has been modified.
    3. Differential Amount. (Between Earlier Planning Amount and Planning Amount that was entered now)
    In one statement, User needs all the change log details in Planning Amount to be flown to BW and saved so that he can report.
    How to create this setup.?
    Can the same  Real Time InfoCube 0CRM_C01 be used to save this information ?
    How to configure the system in Planning Layouts to capture User/Time Stamp/Amount Details.
    Any inputs in this regarding will be greatly appreciated.
    Regards
    RY

    Hi Kumar,
    Upload com.sap.logon.runtime.par(logon page .par file) into the portal.
    problem will be solved..
    regards
    Nizam

  • Editing logging details for notifications from Facebook

    Does anyone know if it's possible to change/edit the logging details for the notification from Facebook (well in fact for that matter for anything else too).
    When I logged them in for the first time I didn't realise I was logged in on facebook with wife's page and now I seem to be getting her notifications instead of mine.

    I am having this issue too! Just posted a question regarding this.
    I own a 5C and spent hours on the phone to tech support who also contacted Apple but they say it's a Facebook issue and was told to contact them direct.
    Facebook do not respond to individuals so I'm concerned that we are not going to get a solution.  Apple don't seem bothered!
    I switched from android recently and never had this problem......strange!

  • Infotype Log Report

    Dear Experts,
    1. I want a STd Report where we can get Infotype Created date, Created ID/Personnel no,Created Time and date in Same report.
    2.Same for Chenged details Also.
    But the problem is in T.Code- S_AHR_61016380 we are able to see ony changed details not created ones. we want both seperate reports.
    Alsoi have used RPRAPA00  but no use. please reply soon.
    Thanks in Advance.
    Regards,
    R.Mythili
    ***No CAPS For the description of the Subject Please  it has been changed ***

    Hi,
    Not sure why you think that the Logged Changes in Infotype Data report (RPUAUD00 - Trans Act S_AHR_61016380 ) does not give you the created information.  If a newly created infotype, the "old" data will be blank and the new data displayed.  Same with changed data - old in left column and new on right.  Date, time and person who changed the data are given.
    You said you wanted a standard report and Logged Changes is it, but if you want to create your own, add the fields AEDTM and UNAME to each infotype in any custom Infosets via SQ02.  You can then report on all infotypes as to who changed the data and when.  Select on a range of dates and you can see the old information and new information for the selected infotypes.
    Paul

  • Infotype Logging

    Hi masters!
    Well, first of all I´m a Basis guy but I´m having a problem here regarding some infotypes to be registered. Well, actually I would like to know how could I start doing this since I have no ideia and they told me to make this task ´cause there is nobody else. Second, and the most importart for me, is there any kind of performance impact once I register those infotypes?
    By the way, here they are:
    0000     Actions
    0001     Organizational Assignment
    0002     Personal Data
    0006     Addresses
    0007     Planned Working Time
    0008     Basic Pay
    0009     Bank Details
    0014     Recurring Payments/Deductions
    0015     Additional Payments
    0016     Contract Elements
    0041     Date Specifications
    0071     Pension Funds  GB
    0105     Communication
    0171     General Benefits Information
    2001     Absences
    2006     Absence Quotas
    I don´t really wanna impose, but I´d really appreciate if you give  a hand with that. Thank you very much in advance!!
    Bye

    V_t585A, V_t585b and v_t585C are the tables to maintain the logs.
    use report RPUAD00 to view the logs.
    Also there is performance issue therefore rather than logging the entire infotype decide which fields need to be logged and maintain the same accordingly.
    Regards,
    Divya

Maybe you are looking for

  • Choosing a Design: Virtual KF - Y/N?

    Hello everyone, I need some help making a design decision to solve a fairly challenging issue I am facing. I am working with inventory and sales cubes for a retail company. These cubes are pupulated with about 2 years worth of data. Our business is r

  • Could we have an Update on the iPod Nano Replacement program for all Norwegian users perspective...?

    This is a post that will be in Norwegian. Hei. Noen som har fått sin erstatnings Nano ennå. Jeg har fått beskjed om at den er sendet den 6 januar, med et sporingsnummer på ti siffer. Dette sporingsnummeret funker ingensteder. Noen der ute i samme sit

  • Importing files via MDS

    I'm trying to import an event handler via MDS but I don't think the file is getting imported: This is what my weblogic.properties look like: wls_servername=oim_server1 application_name=OIMMetadata metadata_from_loc=/apps/mds/from metadata_to_loc=/app

  • Making a referenced field a range?

    Hi there I'm currently doing a dialog programming lets say I have a custom table Z_ABC with MATNR field. When i get this field from dictionary at layout, it shows as a normal single input field. Can I make this field a range?

  • Win 8 problem

    I have not beern able to authorize my laptop since I put Win 8 on it in February 2012.,