Infotype Master Data - TCODE for recording

Hi HCM Experts,
I am just new to HCM and engaged in data conversion template preparation. I will be executing BDC for below info types. I explore few Tcode in HCM and found that infotypes are repeating on other HCM Tcode also.
Would seek advise on best fit Tcode to perform BDC on below each info types. (i.e which is Tcode to be used for recording of master data of below Into types)
IT1000     Object Name
IT1001     Relationships
IT1005     Planned Compensation
IT1008     Acct. Assignment Features
IT1010     Authorities/Resources
IT1013     Employee Group/Subgroup
IT1050     Job Evaluation Results
IT1051     Survey Results
IT1011     Working Time
IT1028     Address
Please note that i am aware about LSMW and data load conversion activities, need inputs on respective Tcode against each infotypes.
Thks in advance for helping.

Hi ,
  Use the SHDB transaction for BDC Recording.
  Give the transaction to record as  PA30.
  Then PA30 screen will come.
   Fill the Infotype based on your requirement.
  Then continue with recording by filling the details of corresponding infotype.

Similar Messages

  • Track Master Data Changes for Multiple countries

    Hi experts,
    I am in a Global HR Implementation & Rollout Project. We are creating Outbound Interfaces for 3 countries to export pay, time and general data to the 3rd party systems in those local countries. (Payroll is outsourced there).
    As well as sending New Joiners data every month, we need to send Changers data also to all those 3rd partys every month before the Payroll runs.
    I know 2 solution for this :
    a). Using Change Documents - Tcode : SCDO ..etc
    b). Using the report RPUAUD00.
    c). Using RBDMIDOC.
    Query :
    1). Are these the only solutions ?
    2). Whats the best solution for doing this for a Global Rollout project ? I need to track master data change for different countries for different set of Infotypes and fields. I need to send those Changers data as well as the New Joiners data through the Outbound Interface to all the local countries.
    This year we are doing for 3 countires, next year for 9 more countries, etc. Whats the best solution keeping this in mind ?
    Restrictions :
    1). Our Client HRs dont want us to disturb the report RPUAUD00 as they use that regularlly and want the flexibility to configure the configs themselves.
    2). If I must need to create and activate Change Documents for ALL individual fields, is there an easy way of doing this ?
    3). I need to send this Changers data from SAP to Legacy system, so dont know if RBDMIDOC will be a good solution for this. Any comments ?
    Just want the best possible and feasible solution for this issue.
    I will be please to allot point to anyone who gives a good solution.
    Moreover will be Thankfull also !!
    Cheers.

    Please try with transaction code "PC00_M02_LINF0"
    Cheers
    Suresh.KK

  • HR ABAP : Track Master Data changes for multiple countries

    Hi experts,
    I am in a Global HR Implementation & Rollout Project. We are creating Outbound Interfaces for 3 countries to export pay, time and general data to the 3rd party systems in those local countries. (Payroll is outsourced there).
    As well as sending New Joiners data every month, we need to send Changers data also to all those 3rd partys every month before the Payroll runs.
    I know 2 solution for this :
    a). Using Change Documents - Tcode : SCDO ..etc
    b). Using the report RPUAUD00.
    c). Using RBDMIDOC.
    Query :
    1). Are these the only solutions ?
    2). Whats the best solution for doing this for a Global Rollout project ? I need to track master data change for different countries for different set of Infotypes and fields. I need to send those Changers data as well as the New Joiners data through the Outbound Interface to all the local countries.
    This year we are doing for 3 countires, next year for 9 more countries, etc. Whats the best solution keeping this in mind ?
    Restrictions :
    1). Our Client HRs dont want us to disturb the report RPUAUD00 as they use that regularlly and want the flexibility to configure the configs themselves.
    2). If I must need to create and activate Change Documents for ALL individual fields, is there an easy way of doing this ?
    3). I need to send this Changers data from SAP to Legacy system, so dont know if RBDMIDOC will be a good solution for this. Any comments ?
    Just want the best possible and feasible solution for this issue.
    I will be please to allot point to anyone who gives a good solution.
    Moreover will be Thankfull also !!
    Cheers.

    I have used PU12 for same purpose at a similar client. It will fulfill all your needs I guess, but the learning curve is big. Search for "Interface Toolbox" or "PU12". Basically your search will end-up in these two links:
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYSOME_INTERFACE.pdf
    HR Interface Toolbox - PU12

  • Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

    Hi,
    Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
    T. Code is:  /SAPCND/GCM
    I need to load data on a file (extracted from 4.6) for service contracts.
    I tried LSMW : for this transaction, recording does not work.
    I am trying loading thru Idocs (LSMW). But that too is note really working.
    Do we require some custom development for this , or is some SAP standard funcntionality available ??
    Can anyone provide some valuable inputs one this.
    Would appreciate your responses.

    Hi Tiest,
    Thanx for responding.
    U r right, our clint is upgrading from 4.6 to ECC.
    So as per the clients requirements, we are maintaining all the configs for Services in CRM.
    Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
    What I am looking os some standard upload program.
    LSMW recording does not work.
    This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
    IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
    But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
    Till now, I am only able to define just one field name and a field value.
    I want this to word for mutliple entries.
    Hope u get my point.
    Thanx

  • Master Data source for sales district or Region in CRM

    Dear All,
    Please let me know the Master Data source for sales district or Region in CRM.
    Thanks
    Regards,
    Sai

    Hi Tiest,
    Thanx for responding.
    U r right, our clint is upgrading from 4.6 to ECC.
    So as per the clients requirements, we are maintaining all the configs for Services in CRM.
    Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
    What I am looking os some standard upload program.
    LSMW recording does not work.
    This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
    IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
    But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
    Till now, I am only able to define just one field name and a field value.
    I want this to word for mutliple entries.
    Hope u get my point.
    Thanx

  • Master data Load for Substance Creation :  Using BAPI in LSMW  ?

    Hi ,
    Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
    I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
    Appreciate your help and suggestion.
    David

    Thanks John.
    I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
    The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
    With Respect & Regards
    David

  • Master data load for 0COSTCENTER (Cost Center) failing

    Hi Experts
    I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
    (R) Filter Out New Records with the Same Key
          (G) Starting Processing...
          (R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
    Could you help me on this one please.
    Regards
    Akshay Chonkar

    Thanks All
    I have got the issue resolved
    The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
    So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
    Everything is fine now thanks for your help.
    Regards
    Akshay Chonkar

  • What are the master data tables for 'Plant'?

    Hi friends,
    What are the master data tables for 'Plant' that contain below data?:
    PLANT
    NAME1
    NAME2
    LANGUAGE
    HOUSE_NUM_STREET
    PO_BOX
    POSTAL_CODE
    CITY
    COUNTRY_KEY
    REGION
    COUNTRY_CODE
    CITY_CODE
    TIME_ZONE
    TAX_JURISDICTION
    FACTORY_CALENDAR
    Thanks a lot!

    Hi,
    Plz try out following tables for your requirement.
    TOO1W
    ADRC
    J_1IMOCOMP
    T001W :  werks TYPE t001w-werks, "PLANT
            name1 TYPE t001w-name1, "PLANT DESCRIPTION
            adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
    ADRC:  addrnumber TYPE adrc-addrnumber,  "ADDRESS NUMBER
             str_suppl1 TYPE adrc-str_suppl1,  "STREET2
             str_suppl2  TYPE adrc-str_suppl2, "STREET3
             street TYPE adrc-street,          "STREET
             city1 TYPE adrc-city1,            "CITY
             post_code1 TYPE adrc-post_code1,  "CITY POSTAL CODE
             post_code2 TYPE adrc-post_code2,  "PO Box postal code
             tel_number TYPE adrc-tel_number,  "TELEPHONE NUMBER
             fax_number TYPE adrc-fax_number,  "FAX NUMBER
             str_suppl3 TYPE adrc-str_suppl3,  "STREET4
             location TYPE adrc-location,      "STREET5
             city2 TYPE adrc-city2,  
    For Tax Details :
    J_1IMOCOMP :   werks TYPE j_1imocomp-werks,
                              j_1icstno TYPE j_1imocomp-j_1icstno,
                              j_1ilstno TYPE j_1imocomp-j_1ilstno,
    Hope this will help.
    Regards,
    Archana

  • Master data loads for Attributes and texts failing

    Hello
    Master data loads for Attributs and texts are failing. The error is
    1. Lock Not set for Loading master data attributes
    2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
    3.Error  1 in the update.
    We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
    RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
    Any insight is appreciated.
    Thanks
    Inder

    Hello
    Master data loads for Attributs and texts are failing. The error is
    1. Lock Not set for Loading master data attributes
    2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
    3.Error  1 in the update.
    We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
    RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
    Any insight is appreciated.
    Thanks
    Inder

  • How to load master data texts for (0calmonth)

    Hi pro's
    i hve a issue.
    How to load master data texts for 0calmonth.
    any help is appreciated
    regards
    cheers

    within the admin workbench goto source systems, right click on your source system and click on transfer global settings. There you can choose fiscal year variants and some other options to be loaded to BW.
    Regards

  • Master data table for 0notificatn

    Hi guys,
    What is the name of the master data table for Notification in R3. We are having certain unexpected attribute value for 0notificatn and thought will check in r3.

    Hi Zubin,
    Try to check table QMEL or table vision BIW_QMEL (where the extractor gets the information).
    Kind regards,

  • Master Data Load for New Attribute

    Hi Users,
    We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
    I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
    This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
    When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
    Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
    Please suggest
    Regards
    Zabi

    Hi,
    The situation is:
    Field x from source maps to
    1. field y ( which was existing field ) and also maps to
    2. field z which is the new attribute.
    field y has to get updated for company codes 10 for example.
    field z for company codes 30.
    now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
    So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
    Master Data Load for New Attribute 

  • Master data datasource for the point of delivery and installation.

    Hi,
    Can any one help me with the Master data datasource for the point of delivery and installation.
    Currently i am using ouc_instfacts for installation facts.
    With Thanks& Regards,
    Shakthi.

    Hi Shakti,
    I guess you are asking for assignment of installation to POD (table euiinstln)?
    Then you should check 0UC_PODINST_ATTR.
    Best regards
    Harald

  • "master data deletion for requisition" before master data loading

    Hello Gurus,
             in our bw syetem , for   process chains for loading  master infoobjects, all include "u201C master data deletion for requisition" ABAP
    process  except for one process chain. my question is:
           why that process chain for master data loading is different from others as for lacking "master data deletion for requisition" in it?
    so it does not matter if you include " master data deletion for requisition" ABAP  process in process chain for master data loading ?
    Many thank.

    Hi,
    ABAP Process means some ABAP program is being executed in this particular step.
    It's possible that for all of your process chains except for that one requirement was to do some ABAP program processing.
    You can check which program is executed by following below process:
    Open your process chain in planning view -> Double click on that particular ABAP process -> Here you can see program name as well as program variant.
    Hope this helps!
    Regards,
    Nilima

  • Master Data Required for 2LIS_02_HDR Data Source Installation

    Hi All,
                  We are trying to install  2LIS_02_HDR DataSource through BC for our purchasing implementation . Can you suggest what all the Master Data required for this Data Source.
    Regards,
    Aditya

    Hi ,
    Please see this link.
    http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
    In the same page you can find all details.
    Hope this helps.
    Thanks
    CK

Maybe you are looking for