Infotype not found

Hi all,
I configured an infotype in one of my clients and now i need to use the infotype in another client . I am aware that 9xxx infotypes will not be available cross clients. Can anyone suggest how to make this work? I know that Table T582* is not updated with the new infotypes in the new client

Hi,
i think there will be a request present for even the table creation Utilities->Version Mgmt. Cant we transport to another clients based on the request. i think the table can be made use even in other clients after transport. even iam new to this. check and just let me know whether my thoughts are correct or not.

Similar Messages

Error message HRTIM00WS007 - infotype not found

Hi ALL,
I am getting this error message when I am trying to access IT2001.
Infotype 0007 not found on XX.XX.XXXX (date)
Message no. HRTIM00WS007
Please guide
Regards,
Amit

Hi Arun,
Yes I have maintained on the planned working time infotype on that date

INfotype not found error

Hi expert.
When i try to create a new employee in PA30.
I got error that infotype is not found in below function:
CALL FUNCTION 'HR_INFOTYPE_DATABASETABLE_GET'
      EXPORTING
        infty           = infty
        tclas           = tclas
      IMPORTING
        dbname          = dbtab
      EXCEPTIONS
        entry_not_found = 1
        OTHERS          = 2.
    IF sy-subrc <> 0 OR dbtab = 'TEVEN' OR dbtab IS INITIAL.
      RAISE infty_not_found.
    ENDIF.
Thanks & REgards
Anwar

When i am trying to change any dataof any user who is hired and have entry in 0000,through pa30,as soon as i click on save button,dumb error comes..upto 1 hr earlier it was working fine,,is thier any error for country grouping???
A RAISE statement in the program "SAPLHRAC" raised the exception                              |
condition "INFTY_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.

Infotype 0007 not found on 22.01.2010

Hi,
I've added IT2006 in V_T588D and a new entry on validity period for default value in VC_T559L based on QUOMO. In this infogroup, there is a dynamic action to create IT2006 (with a different subtype which I've added in V_T588D).
After I done with these changes, there was a message "Infotype 0007 not found on 22.01.2010" in PA40 when it comes to the dynamic action. The IT2006 screen which the dynamic action was supposed to call did not appear. Instead, it will just proceed to the next infotype. This was not the case before I made the changes that I mentioned above.
I've tried to reverse the change by removing the new entries in V_T588D and VC_T559L but the same message still appears, and the dynamic action did not call up IT2006 screen. I suspect that this message is caused by the dynamic action. How can I debug the dynamic action? In addition, what else could have caused this error?
I would really appreciate any help to resolve this asap. Thanks in advance.
Rgds,

HI Kok Siong
Just check the 7 infotype and maintain it for the requested period.
or if you want to use debug to find out what dynamic action is triggered you may set break point here:
1) main program depends on what infotype you what to debug for example for 1 it is MP000100, for 16 it is MP001600 and so on (T777D-REPID).
2) include MPPERS00
3) subroutine FORM end_of_screen (put break point for the line in bold)
      IF ale_flag IS INITIAL.                            "XFYAHRK063273
        IF pspar-vinft NE space. "infotype view         "XYLPH9K007065
          PERFORM dyn_measure IN PROGRAM (view_repid).   "XYLPH9K007065
        ELSE.                                            "XYLPH9K007065
          PERFORM dyn_measure.
        ENDIF.                                           "XYLPH9K007065
        PERFORM process_measure(sapfp50m).
        if pspar-massn eq space.                        "XYLN160088_2
      depth in rp_infotyp(sapfp50g) computed        "XYLN160088_3
      begin correction XYLN208111
      IMPORT depth FROM MEMORY ID 'DYNMEAS_DEPTH'."XYLN160088_2
        CALL FUNCTION 'HRPAD00_GET_DYNMEAS_DEPTH'
               IMPORTING
                    DEPTH = depth.
after it just check the variable DYNMEAS
at this time it contains the list of dynamic actions which will be performed for the debugged infotype

%_HR99XX (99XX - custome infotype number) include not found

The following syntax error occurred in program "AQW8PERSONALE===FERIE_ROL_GEN=
" in include "AQW8PERSONALE===FERIE_ROL_GEN= " in "INCLUDE report "%_HR9105" not found
where 9105 is custom infotype .this problem is comming in upgrade version of the system ie from 4.7 to ecc 6.0.

Thank you, Yes Its updating in 2006....but only sy-datum and username are updating .....Leave quota i am changing from 4 to 3 . its not updating, but showing in screen when i used dialog = 2. Also the same screen appearing 3 times and when i am trying to click on save button its ending with an error 'internal maximum number of sessions reached' , then screen automatically closing by itself.

Error in Dialog Module - INCLUDE report "%_HR9066" not found

Hi,
After upgrade from 4.6B to ECC 6.0.When i display/create/change Custom Infotype 9072 in transaction PA30. i encounter a dump stating
INCLUDE report "%_HR9066" not found. It occurs when the program goes for CALL DIALOG... in the SAP standard program.
Do advice on how to resolve this issue

Hi Chayan,
9066 is the custom infotype .
After upgrading check for the following things which are related to infotype :
1) Go to se51 and check for Program MP906600 and screen 2000 exist .If not there is a problem in calling the screen
2)Go to se11 and check whether the table PA9066 and structure P9066 exist
3)Check whether the infotype is assigned to the Infotypes in spro .(Optional)
If everthing is suceessful , the infotype exist in the system . If not one of the objects might miss from the above list .
Regards,
Gajalkshmi

Syntax Error - INCLUDE Report "%_HR9010" Not Found

I have an HR ABAP program(Query Generated) that works in Enterprise and is now being testing in the ECC 6.0 test environment and is getting an syntax error. The syntax points the line in the code where a custom infotype is declared with the infotypes syntax. Example:
Infotypes:
9010
syntax error reads:
'include report"%_HR9010" not found.
Why am I getting that syntax error? The syntax error does not occur on standard sap infotypes, 0000, 0001, 0002. It appears to be failing on custom infotypes. The Structure definition is there, the table definition is there and there are thousands of records in the table and it can be read by other programs with no problem. What piece is missing, could it be something to do with Infosets, whatever they are?

Hi Murali,
Please excute the report RPUMS40CCI. This report is to generate infotype includes and additional structures required for not only custom but also standard infotypes.
In the selection screen provide the infotype number and select checkboxes 'Generate infotype include'
and 'Generate additional structure'.
Note: "RPU40CCI" is only for infotypes which starts with number '9*'.
Thanks & Regards
Santhosh
Edited by: SS on Feb 12, 2009 1:21 PM

Business number not found

Hi Girus,
When I m tring to run the payroll for Canada I m getting following error.
Business number not found
Check account and registration number configuration from 1.01.2010 31.01.2010
I m maintaining 0461,0462,0463,0464 tax infotype for canada.
Please help me to resolve this isssue.
Thanks
Sanju

Hello Sanju,
Kindly refer the WIKI document, check whether you have maintained customizing
https://wiki.sdn.sap.com/wiki/display/ERPHCM/WCB
Mainly check whether you have maintained WCB A/C no with Rate for the Province , the employee belongs from the following IMG link
Payroll Canada--> Worker's Compensation --> Set up WCB accounts
With Regards,
S.Karthik

Business numbers not found

Dear experts,
I am executing Canada payroll , when executing payroll I got the error"Business numbers not found check account and registration number configuration
I have configured Business numbers in IMG, still i am getting error in KTXDM function...
Please do the need full
Regards
VSR

Business number configuration for Canada Payroll works in two ways.
Option 1: Uses the Personal area of the employee along with Contract field on Infotype 1.
Business number will be displayed on Infotype 0461 thru 0464 infotypes (Dynamically derived based on the configuration done).
Once the above is setup then when you run paryoll processing the error message should disappear.

INCLUDE report "%_HR9008" not found'.

Hi All
I also got the same problem. I already executed RPUMS40CCI. But i still got error message ' INCLUDE report "%_HR9008" not found'.
any one tellme how to run the standard program RPUMS40CCI?

Hi Jagan,
You will have to run program RPUMS40CCI for this custom infotype and the error will be resolved.
Reward points if useful...
Thanks,
Falguni

INCLUDE report "%_HR9920" not found

Hi.
I'm having að problem with an old ABAP report which I wrote. After I and my company upgrated SAP from 4.6C to 4.7, I get the error "INCLUDE report "%_HR9920" not found". This infotype 9920 is some custom made infotype I think and it looks like I can not use it as before in my report.
Here is my ABAP code:
INFOTYPES:
0000,
0001,
0002,
0006,
9920. "The error comes here
TYPES: BEGIN OF tp_data,
bukrs LIKE p0001-bukrs,
perid LIKE ...
Can any one give me a hint what the problem is?
Regards,
Stefán.

Hi Umar.
I tried to access the screen for infotype 9920 through pa20/pa30 and that is all right, no error and the screen appears normally.
Then I tried to check the report again in case of the screen had regenerated, but I got the same error. It was not me who developed this infotype and the screens so I am not sure how to regenerate the IT9920 screen. Can I do that through PM01?
P.S. I also tried to re-activate the structure p9920 but it did not change anything.

INCLUDE report '%_HR9070' not found.

When run HR related programs in upgradation project iam getting error as "INCLUDE report '%_HR9070' not found.".
To remove this error i need to run one standard program, any body knows that program please let me know

Hi Jagan,
You will have to run program RPUMS40CCI for this custom infotype and the error will be resolved.
Reward points if useful...
Thanks,
Falguni

No automatic updation for IT0008. Allowance Grouping not found.

Hi
Guys whenever i am saving any employees 0581 it by giving metro,city allowances information in PA 30 i am getting the message "No automatic updation for IT0008. Allowance Grouping not found".
Can anybody tell what the reason behind it?
Regards
Surajit

Hi Sikindar,
Request you to let me know, if in table V_512W_D, in the cumulations column 14-HRA Basis, if there should be a check for wage type M230.
Would this solve the problem of automatic updation on infotype 0008??
Priority:HIGH
Thanks in advance,
Regards,
Angel

%_hr9105(9105 custome infotrype no) is not found

The following syntax error occurred in program "AQW8PERSONALE===FERIE_ROL_GEN=
" in include "AQW8PERSONALE===FERIE_ROL_GEN= " in "INCLUDE report "%_HR9105" not found
where 9105 is custom infotype .this problem is comming in upgrade version of the system ie from 4.7 to ecc 6.0.

Bieng declared $WERKS field as DUMMY, is not relevant, so no matter its value, it will pass..
There's a catch! If even DUMMY means literally that no matter user has any value, he is still authorized but in reality for such \fields authorization check is only successful when a value ' ' or * is found in user's authorization else it errors out.
Sorry confused with programs where AUTHORITY-CHECK has ' ' coded instead of DUMMY. You are right, DUMMY specified for as field would pass authorization check with any/no value in user's authorization. Please ignore my statement
Sandipan
Edited by: Sandipan Choudhury on Dec 29, 2010 2:11 AM

Item cost not found for one or more items - Inventory Posting

Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
Sean

Hi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean

Infotype not found

Similar Messages

Maybe you are looking for