Infotype screen control

Hi,
Can anyone help me with the difference between the STD and RF screen control option for the fields of an infotype in the table T588M?
I understand that both STD and RF option makes a field mandatory. Also, 'STD' means standard Setting and 'RF' means required field at the outset.
But please let me know the exact difference between them.
Warm Rgds,
Arun.M

Hi Arun;
Actually they are not same. There is difference.
STD is standard and RF is required field.
Normally STD is coming with the system standard. I mean if that field is important for every company etc, I mean that field is required for every entry then STD means same thing with RF. But in some conditions some fields are not mandatory in the system standard. So when it is STD in T588M you can leave this fields empty.
But RF makes the field reuired field anyway and you need to enter a value to save the infotype.
Hope I could explain it clearly.
Regards.
Okan

Similar Messages

  • Add ifnotype field to an Infotype Screen Control for Infotype 0006

    How do I add an infotype field to an Infotype Screen Control for Infotype 0006. We need to add an additional Field for mobile phones. I have lloked in screen control (V_T588M) with no joy.
    Edited by: Henry Manana on Sep 1, 2010 12:11 PM
    Edited by: Henry Manana on Sep 1, 2010 12:12 PM

    You may copy your current screen into a new screen (e.g. 2099) for MP000600 and add the 2 fields into the element list as well as the screen layout of screen 2099. Then set an appropriate Modification Group 3 to these 2 fields in T588M detail screen for screen 2099. Configure feature P0006 and table T588M to set screen 2099 for molga 16.

  • Infotype Screen Control (T588M) not working for additional fields to contro

    Hi,
    I have a requirement to enhance IT 0002 with fields LNAMR, FNAMR and CNAME. Also field preferred language.
    I have included LNAMR, FNAMR & CNAME as additional fields in the Include Screen 2040 elements, lay editor and maintained table T582c where i have assigned enhancement to the standard screen. These fields are getting displayed in infotype 0002
    But the issue is Infotype Screen Control (T588M) is not working for these fields to control the display or hide.
    Has any of you come across this issue? what could be the reason for this issue? Please suggest ASAP.
    Thanks in advance.
    Regards

    Hi Experts,
    Please help with your inputs and suggestions.
    Regards

  • All fields are not displaying in the infotype screen control

    Hello Everybody,
    All the fields from infotype 2001 and 2002 are not getting displayed in the screen control for these infotypes and
    when I checked the screens for these infotypes, the mod. groups/functions has not been set for field 'Group3' for those
    infotype fields.
    Is there a way I could set this field ' Group3' for these infotype fields also ? Can it be done thru screen exit and if yes could
    anyone tell me what's the screen exit for these infotypes ?
    Thanks
    Alok

    solved it myself.

  • Infotype Screen control - change field from display to change

    Hello,
    I have a field in a custom infotype, which is showing up as only display. I want to change it so that values can be input. I checked the screen layout in se51 and found that the field is checked as input possible field. There is no entry for this infotype in T588M. I am not sure, where else should I look so that i can change to field to take the input. Please suggest.
    Thank you very much !
    Rush

    Hello Everyone,
    I checked in Module pool Program. The program is written to check the field for some personnel areas. Now, when i did debug, I found that PSYST-werks is not read correctly. Suppose if there are 3 records in infotype 0001, its getting the first record value, not the recent record value. Any suggestions how to change the code, so that the PSYST get the recent record value?
    Sikindar, T588M do not have entry for this table. thank you.
    Jayanthi thank you for your help too.
    Rush
    Edited by: rushi K on May 13, 2008 4:15 PM

  • Transfer control back to calling program from infotype screen

    i've developed a module pool program that uses 'call transaction pa30'BDC  to an custom infotype screen... after the 'save' button is pressed the control goes to the infotypes initial screen.
    but i want the control to come back to the calling module pool program.. how do i do that??

    Hi Joseph,
    have you considered using function module HR_INFOTYPE_OPERATION with parameter DIALOG_MODE = '2' instead of CALL TRANSACTION?
    Regards,
    Christian.

  • Is there screen control at the Subtype level for ESS Address in ECC 6.0?

    Hello Developers,
    The Dynpro view for adding/maintaining ESS Address information requires certain fields to be entered regardless of the type of Subtype (ex. Permanent Address or Work Address).
    It's ok for our Permanent Address subtype to require certain fields such as City, State, and Postal Code, but we don't want these same fields to be required for our Work Address subtype.
    Is there a way to control this for individual subtypes?
    Thank you,
    Terry

    Thank you Shikhil,
    This was already tried and didn't work. 
    Running a debug session, I can determine that the message is coming from the back-end SAP system.  I can also see that these fields are flagged as Required on the back-end but due to the complexity of the code I haven't been able to determine what table this is read from. 
    The IMG view for "Infotypes - country-specific settings" apparently doesn't control this either but I'm hopeful that there is a screen control that will allow me to remove the "Required" setting.
    Terry

  • Why there is no screen control feature?

    Gurus,
    I am wondering why we don't have a feature P0000 for screen control of ifo type 0000
    We have control feature such as P0001 for other info type 0001 etc.
    Just curious!!!
    Any thoughts?
    Thanks,

    Hi Thaman,
    Screen control features are for those infotypes where you are recording certain things which can be difft. for difft. country versions. Like for eg. in USA you have SSN on IT0002 screen while in case of UK you will have National Insurance Number and so on for difft other countries.
    So here comes these features where as per based on molga and the return value from the feature based on var key they determine which screen to show.
    Now if you will look IT 0000, its very standard and have no such field which you will think that this can be difft. for various countries.
    So as there was no need to have difft. screen no need to have control feature P0000.
    Hope this will resolve your query.
    Regards
    guds

  • Screen control in HR

    Hi All,
    I have added custom fields in infotype 6 ( address) . mainn prg mp000600 and custom prg is zp000600. i need to move some fields to screen 2010 of main prg mp000600.(those custom fields are not available in screen control table T588M. but onther custom fields in 200 subscreen are available in T588M. can any one explain me how the enteries are populated for screen control. (the custom entries are available when i enchanced the infotype using PM01 - 'create all' button. plz let me know my understanding is correct, and y the entries are not available for mp000600 in t588m table).
    Thx
    - Senthil Bala

    Hello Senthil,
    Why do you want to move custom fields in screen 2010? Once you press 'Create all' button, it assign additional screen '200' with custom field to all the screens of module 'MP000600'. You can check the entries in table 'T582C'. For some reason, If entries are not created in table 'T582C', then you need to do it manually. When you are using screen '2010' of IT 0006, it should also give you additional subscreen '200' on in the bottom. You can control screen fields for screen '200' in 'T588M' by creating a new entry in table 'T588M'  for module 'ZP000600' and screen '0200'.
    Regards,
    Ahmad

  • Feature to default values on infotype screens

    Hi All,
    Could I use a Feature (txn PE03) to determine the default values on an infotype screen?
    For example, I want the value in field FUNKT on Infotype 34 to default to say 'KLMN' if the Employee Group is '1' and the Emp. sub group is 'Z5'.
    I would like to use the screen modification config (table T588M) to assign the Feature and get the values without coding.
    I know I can achieve this by using a subroutine on dynamic actions or a BADI for infotype processing etc. but I am lazy and don't want to code if I can avoid it.
    Many thanks in advance
    Sanjay

    Thanks Sarika.
    I can create a Feature in PE03 but how do I use that in the config (table T588M)? Because if I am not able to use it in the config, I will be forced to code (using any Fn. Mods of the likes of HRFEATUREBACK*).
    The Feature ABKRS doesn't seem to be specified in table T588M as such there is bound to be coding behind it in the IT0001 processing programs.
    Cheers,
    Sanjay

  • Screen control in VA01

    Hi Gurus,
    I want to include screen control while creating a Sales Order through recording.
    Basically my requirement is that I have to create a Sales Order through an Idoc which I can achieve by BDC recording, but I want to include a check stating that on the Sales Order, only 10 Line items can be fit on a page, and then I would like to include the 'page down' functionality.
    So if I have more than 10 line items, they should display the first ten line items on the first page, and then so on.
    Kindly help.
    Thanks.

    Hi,
    I suggest you please use BAPI, since you want to use for IDoc.
    If you would like to stick to BDC please see the below code.  OK code = POAN at end of each line item, Which enables move first line up and second line to fist line.  So that you can enter as many line items you want.
      perform bdcdata using: 'X' 'SAPMV45A' '4001',
                                 ' ' 'BDC_OKCODE' '=POAN'.
        perform bdcdata using: 'X' 'SAPMV45A' '0101',
                               ' ' 'VBAK-AUART' p_auart,
                               ' ' 'VBAK-VKORG' p_vkorg,
                               ' ' 'VBAK-VTWEG' p_vtweg,
                               ' ' 'VBAK-SPART' p_spart,
                               ' ' 'VBAK-VKBUR' p_vkbur,
                               ' ' 'VBAK-VKGRP' p_vkgrp,
                               ' ' 'BDC_OKCODE' '/00'.
    *_ Screen 2
        perform bdcdata using: 'X' 'SAPMV45A' '4001',
                               ' ' 'KUAGV-KUNNR' p_kunnr,
                               ' ' 'VBKD-BSARK'  p_bsark.
       PERFORM bdcdata USING: ' ' 'Z_CSR' 'E010145309'.
        if not p_kunag is initial.
          perform bdcdata using: 'X' 'SAPMV45A' '4001',
                                 ' ' 'KUWEV-KUNNR' p_kunag.
        endif.
        ws-posnr = 10.
        loop at iupload into upload_wa.
          ws-index = sy-tabix.
          perform bdcdata using: 'X' 'SAPMV45A' '4001'.
          if upload_wa-reqdt <> space.
           WRITE upload_wa-reqdt TO ws-date.
            ws-date = upload_wa-reqdt.
          else.
            write sy-datum to ws-date.
          endif.
          perform bdcdata using: ' ' 'RV45A-KETDAT' ws-date.
          perform bdcdata using:
                          ' ' 'ZSDSTRUCT_ZGEN_CATID(02)' upload_wa-catlg,
                          ' ' 'ZSDSTRUCT_ZGEN_GRDID(02)' upload_wa-grade,
                          ' ' 'RV45A-KWMENG(02)' upload_wa-zmeng,
                          ' ' 'BDC_OKCODE' '/00'.
          if ws-index =  '01'.
            perform bdcdata using: 'X' 'SAPMV45A' '4001',
                                  ' ' 'RV45A-VBAP_SELKZ(01)' 'X',
                                   ' ' 'BDC_OKCODE' '=PBES'.
          else.
            perform bdcdata using: 'X' 'SAPMV45A' '4001',
                                  ' ' 'RV45A-VBAP_SELKZ(02)' 'X',
                                   ' ' 'BDC_OKCODE' '=PBES'.
          endif.
          perform bdcdata using: 'X' 'SAPMV45A' '4003',
                                 ' ' 'VBAP-POSEX' upload_wa-posnr.
          if not upload_wa-kdmat is initial.
            perform bdcdata using: ' ' 'VBAP-KDMAT' upload_wa-kdmat.
          endif.
          perform bdcdata using: ' ' 'BDC_OKCODE' '/EBACK'.
          perform bdcdata using: 'X' 'SAPMV45A' '4001',
                                 ' ' 'BDC_OKCODE' '=POAN'.
        endloop.
        perform bdcdata using: 'X' 'SAPMV45A' '4001',
                               ' ' 'BDC_OKCODE' '=POPO'.
        perform bdcdata using: 'X' 'SAPMV45A' '0251',
                               ' ' 'RV45A-POSNR' '10',
                               ' ' 'BDC_OKCODE' '=POSI'.
        if p_check = 'X'.
          perform bdcdata using: 'X' 'SAPMV45A' '4001',
                                 ' ' 'BDC_OKCODE' '/EBAC1'.
        endif.
    Best Regards,

  • HR Infotype Screen Programming!

    Hi All,
    I have a text field in my infotype screen which is editable.
    By default, the enteries are in CAPS.
    What do i need to do, if i want the field to accept "Caps" and small letters aswell?
    Thanks in advance for all the responses.
    Regards,
    Sundar.

    Sundar,
    If you are working with a standard SAP infotype, fields and Screens, this change is considered a modification.
    The other thing that you should check is if your field is tied to something defined in the data dictionary, then upper/lowercase is also attached to the domain of your field definition.  Changing it only on the screen may not necessarily populate the field with upper/lowercase.
    If you click on the "definition" tab of the domain definition you will see a checkbox called upper/lower case.
    Best Regards,
    Chris H.

  • Display full-screen controls NOT visible

    I exported my keynote presentation as a QuickTime full-screen movie. In Preferences, I have the controls checked to display full-screen controls and to never hide them. They do not show up anywhere. I also set the presentation as a slideshow to control the presentation using the arrow keys and they do not show up. In the Guide it states that as long as "Display full-screen controls" is selected in QT Player Preferences, you can make hidden controls appear by moving the pointer. They don't.
    Any help out there would be appreciated...I have a deadline to meet!

    Huh, I didn't realize you had to format a flash drive for a Mac, I'll check that out.
    O.K. I may have something that I said I was going to try...I unlocked the file, changed *_My* permission_, the Staff and Everyone else to "Read Only" privileges, then locked again. I then zipped it and sent it to my son this morning. He said he could open it, change it but it would not allow him to save it! I'm going to test it further somehow but I don't know anybody else that has a Mac w/Keynote '08. Do you have Keynote 08? Can I send it to you to test (it would be alot easier) or to someone in the Keynote discussion area?
    This message should now have a subject line..."Keynote presentation to CD to be accessed, but not changed?" When this all began, I searched discussions in Keynote on this and found nothing with a concrete answer, only that you cannot save a keynote presentation as password protected. I posted twice and no one answered. I think this part of our discussion will help Keynote people.
    *Back to your area of expertise and my original question!*... Can you still look to see what key commands force the HUD for me for my QuickTime Movie as Slideshow? I know they could not change that, but the arrow controls would have to be displayed. I don't know what HUD means but I'm going to search too... I found this link: http://developer.apple.com/documentation/QuickTime/Conceptual/QT7-2Update_Guide/NewFeaturesChangesEnhancements/chapter_2_section9.html
    Could you take a look and see if this is what I need? I do have Mac OS X v10.5.4 and QT v7.5 and my Preferences window does not have a recording tab but my Full screen window looks that same. When I view my A/V controls it also doesn't view as in figure 1-8. I'm confused again! QT 7.5 is the latest version, isn't it?

  • How to hide OM infotype screen field

    Hello Experts.
    Please let me know how to hide OM infotype Screen field ? i want to hide Percentage field on IT1011.
    I know i can create alternative screen "Z" and hide the field and attach alternative screen to the Module pool.
    Please let me know if i can do this using BADI so there will not be any change to standard.
    Regards,
    Saurabh

    Hi Shiva,
    To get the detail about a table filed you can use DDIF* function module.
    Here in this particular case you can use FM   DDIF_FIELDINFO_GET.
    Pass the table name & field name.
    After executing that FM you can check   DFIES_TAB  in Tables parameter. i t will be having an entry.
    Check for filed name as   KEYFLAG  , if it is not initial ie.  X then supplied filed is Primary Key.
    If KEYFLAG is initial then supplied filed is not a primary key.
    Thanks & Regards
    Satyam

  • Using Unix to Require ARD Screen Control (but have everything else!)

    A contribution to the community from another post at:
    http://discussions.apple.com/thread.jspa?threadID=986010
    The problem: how can you use the command line to remotely grant the ARD server user full rights to do everything EXCEPT for controlling the end users' screens? On our network, we want end users to have the security of being able to grant permission for screen control. This makes ARD act a bit more like Timbuktu/NetOctopus.
    Here is the solution and the SPACES IN CODE ARE AS LISTED!
    to turn on the require permission function for all incoming ARD users:
    sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -configure -clientopts -setreqperm -reqperm -yes
    to turn on all ARD functions EXCEPT for control screen for the ARD user named "BOB":
    sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -configure -users BOB -privs -DeleteFiles -TextMessages -ShowObserve -OpenQuitApps -GenerateReports -RestartShutdown -SendFiles -ChangeSettings -ControlObserve -ObserveOnly
    macbook pro intel 2 dual core   Mac OS X (10.4.9)   i like cheese of all varieties

    solved via the code seen below

Maybe you are looking for