Infotypes and sub-infotypes maintanence in PPOCE

Hi,
In PPOCE have added IT1009 (health examination) as tab page but how to add sub infotype details in IT1009 tab page...???
Please help....hope for your reply...
Thanks
Sonu

Please help.......!!!!

Similar Messages

Infotypes and its subtypes. ( urgent )

Hi all ,
Please provide me some information regarding basic standard infotypes along with its subtypes , purpose of the subtypes, its fields and its purpose also how the data flows within the data types.
In short i want all the functional details of infotypes and its subtypes.
Thanx,
Amruta.

Hi
Address (IT0006): Sub type may be Permanent, Communication, etc
Family / Dependent Members (IT0021): Sub type Spouse, Family, Dependent etc
Obects on Loans (IT0040): Sub type Laptops, Projector etc
Comminucations (IT0105) : Sub type Mail, Telephone etc
These are some std IT for ur eg., The IT sub types are created based on the req. If you want to know clearly abt the sub types for the available infotype Goto SPRO>Personnel Management> Personnel Administration--..... Infotypes .....

Create Custom Infotype and handle Modification/Updation

Hi All,
I need to create a custom infotype and handle few checks while creating/updating the existing one.
I have gone through the existing threads and have figured out the creation part.
Could anyone tell me where i need to code the checks while creating/updating.
I tried editing the PBO/PAI of the Module pool program, but as its standard, is asking for access key. Do we need to code this in any userexit or implement BADI.
For example,
a) i need to check that only one instance of the infotype should be valid for an
employee at a time
b) This infotype should be created for only Employees and not contingent workers.
c) Few fields on the body section needs to be updated/modified.
Thanks and Regards
Manish.

You can use the IN_UPDATE or AFTER_INPUT Methods of the BAdI HRPAD00INFTY to perform your validations.
Arya

How to add fields in custom infotype and update its screens

Hi Experts
I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release. is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

HR LDB PNP and customer infotypes in 640

Hello,
I encountered the following problem during an upgrade from 4.6C to SAP ERP Central Component 5.0. When using logical database PNP and customer infotypes the syntax check produces the following syntax error:
- INCLUDE report "%_HR9731" not found
I have added an example program below. Prerequisite for this program is that the cutomer infotype 9731 exists in the system.
Has anyone experienced this problem before? And if so, is there a solution? I can program some workarounds, but I prefer a solution, which does not involve changing my code.
Regards,
Marcel
REPORT ZTESTINFOTYPES.
tables: pernr.
infotypes: 0000,
0001,
0002,
9731 mode n.
start-of-selection.
get pernr.
write / p0002-pernr.
end-of-selection.

Hi all,
"You will have to run report RPUMS40CCI (XPRA for generation of
infotype include) for existing customer-defined infotypes.
If you have not run this report then please do so.
The report RPU40CCI creates the infotype include %_HRnnnn (nnnn =
infotype number) and the additional data structure Pnnnn_AF (nnnn =
infotype number) for the given infotype, provided that the correspondin parameter ("generate infotype include" or "generate additional data
structure") are set on the selection screen. If the parameter "maintain only T77ID" is set, no infotype include or additional data structure is maintained, only those entered in table T77ID."
Best Regards
Silvio Galery

Function Module to get Company code and Plant on the basis of infotype and pernr

Hi Experts,
I need to know the function module which will return company code and plant based on infotype and pernr(employee Number).
Thanks,
Salil Bagchi

I think thats the only way
CALL FUNCTION 'CU_READ_RGDIR'
    EXPORTING
      persnr          = p0001-pernr
    TABLES
      in_rgdir        = it_rgdir
    EXCEPTIONS
      no_record_found = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
check whether "Pay date for payroll result" with in Start Date and
              End date, and "Reason for Off-Cycle Payroll" is initial
LOOP AT it_rgdir WHERE paydt >= v_begda
                         AND paydt <= v_endda AND
                         void IS INITIAL
                         AND ocrsn IS INITIAL
                         AND srtza = 'A'.
    v_seqnr = it_rgdir-seqnr.
ENDLOOP.
Hope this helps.
Thanks
Kiran

How to add one more field in infotype and PA 30 screen

Hi to all
My requirement is to add a new field in infotype and that should be reflected in PA30 screen.
Actually in my company one field require from which date the car allowance is started.
For that one date field is require on PA30 screen ..
Also suggest me which screen is suggestable for that. and also give me any othe way is possible.
Thanks & Regards
Anubhav

Yes .. I added the field in the structure but that field is not reflecting in PA30 screen.
please advice me .. what to do...
Thanks..
Anubhav

Query infotype and RT table

Hi experts!!
Is possible to do queries and get information from Infotypes and RT table in the same time.
We would like to do a query with information from infotypes an RT table, we don't want do a query for the data from infotypes and another one to get data from de rt table (PC00_M99_CWTR).
How is possible to do this kind os queries?
Kind regards,
Julian

To check on how to use cl_hr_pay_access class, I would first try google and then the where used list button while reviewing said class in se24 tcode - example of use: RPCGR1K0
DATA: pay_access TYPE REF TO cl_hr_pay_access. "access of payroll result
CREATE OBJECT pay_access.
CALL METHOD pay_access->read_cluster_dir
    EXPORTING
      pernr       = pernr
    IMPORTING
      cluster_dir = rgdir[]
    EXCEPTIONS
      OTHERS      = 4.
CALL METHOD pay_access->read_pa_result
    EXPORTING
      pernr                         = p_pernr
      period                        = p_rgdir
      molga                         = '07'
    IMPORTING
      payroll_result                = pay_result
    EXCEPTIONS
      no_authorization              = 1
      read_error                    = 2
      country_version_not_available = 3
      OTHERS                        = 4.
      CALL METHOD pay_access->read_pe_result
        EXPORTING
          pernr                         = p_pernr
          period                        = p_rgdir
          molga                         = '07'
        IMPORTING
          payroll_result                = pay_result_person
        EXCEPTIONS
          no_authorization              = 1
          read_error                    = 2
          country_version_not_available = 3
          no_person_data                = 4
          OTHERS                        = 5.
result will be held in pay_result_person->inter deep structure
RT is inter-rt
BT is inter-bt
Or you can use function PYXX_READ_PAYROLL_RESULT - again - google or where used in se37 tcode. standard use in RPCDCI00
* FORM GET_PAYRESULT                                                   *
* read the internationl part of the payroll result from sequential     *
* number I_SEQNR.                                                      *
form get_payresult using i_seqnr         like pc261-seqnr
                changing cs_payxx_result type pay99_international.
field-symbols: <payxx_result> type pay99_international.
call function 'PYXX_READ_PAYROLL_RESULT'
    exporting
      employeenumber                     = pernr-pernr
      sequencenumber                     = i_seqnr
    changing
      payroll_result                     = <pay_result>
    exceptions
      illegal_isocode_or_clusterid       = 1
      error_generating_import            = 2
      import_mismatch_error              = 3
      subpool_dir_full                   = 4
      no_read_authority                  = 5
      no_record_found                    = 6
      versions_do_not_match              = 7
      error_reading_archive              = 8
      error_reading_relid                = 9
      others                             = 10.
if sy-subrc <> 0.
    case sy-subrc.
      when 5.
        perform error using c_er_payauth i_seqnr space
                            space space c_yes.
      when others.
        perform error using c_er_readpay i_seqnr sy-subrc
                            space space c_yes.
    endcase.
endif.
assign component 'INTER' of structure <pay_result>
                           to <payxx_result>.
cs_payxx_result = <payxx_result>.
endform.     " GET_PAYRESULT
Good luck.

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

Transfer Custom and enhanced infotypes to ALE HR

Hi All.
We have a few customer infotypes (9xxx) and have enhanced a few standard ones like pa0185 etc. Now we have to transfer the data of these infotypes to other system.
Standard PFAL transaction does not populate these.
I know there is an enhancement RHALE0001. But I am new to ALE. Can someone please guide me how to populate these custom infotypes, and also the enhanced standard ones?
Thanks in adv.

dear the only way for this is -
Step 1 :(we31)
you should create segment that contain all fields from infotype say 0001 (standard & custom) see WE31 Segment->Create with reference->DDIC structure->p0001.
Step 2 :(we30)
create an extension of concerned Idoc message type say HRMD_A06 ,say extention is - by name HRMD_A06EX to include this segement as child segment of E1P0001
Step 3 :(we30)
create an extended IDOC by name ZHRMD_A06EX having base type as HRMD_A06 and extension as HRMD_A06EX
Step 4 :(we81)
add an entry against message type HRMD_A , with base type : HRMD_A06 , extension : HRMD_A06EX , version : 640
Step4 :(we20)
Now , maKe changes to partner profile by adding entry for message type HRMD_A with base IDOC type as HRMD_A06 and extension as HRMD_A06EX
and
you should made settings in table T777D: infotype 0001->IDOC segment: Z1P0001.
in this case system fill automatically IDOC with customer fields data .
Reward if helpfull
amit

Infotype and Include Structures in HR - ECC50

Hi,
I would like to know what are the changes in each and every infotype like different include structures or added fields or modified or deleted fields. How do you compare 46C version with ECC50.
Is there any way apart from remote version management option?
Thanks,
Kiran.

Hi,
I don't know what your actual requirement is.. but the event GET PAYROLL already exists. PL take a look at the Program EXAMPLE_PNP_GET_PAYROLL to get an idea. You can also see the same at this <a href="http://help.sap.com/saphelp_47x200/helpdata/en/33/62ac39d22d11d396e700a0c9306433/frameset.htm">SAP help</a>
Regards,
Suresh Datti

Regarding infotypes and subtypes

from i can get the list of all subtypes related to a particular infotype?

Hi,
There is lot of ways
I will tell u to see easy way
Go to PA30 and give some Personnel No and give Infotype no then press enter now press F4 by placing cursor in subtypes field
now u can see the all subtypes
regards,
Nandha
Reward if it helps

Infotypes and subtypes ESS WebDynpro

Hi,
How to find which infotype(and subtype) the specific ESS WebDynpro is storing(retrieving) information from?? There is not much information on ESS Business package or help.sap.com. There is not much on Service market place also....
I am also looking for information on all the WebDynpros of ESS Business Package.
Thanks

Hi Santhosh,
If you haven't already looked at it, there is some info available in <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/6a/5bc8a009d54fcaa8e06c826a57253b/content.htm">SAP Help</a>
probably not exactly what you wanted..
Regards,
Suresh Datti

LSMW for PA70 Tcode and APPRAISAL infotype in HR ABAP

Hi Experts,
Please help on this, how to create LSMW for PA70 transaction and appraisal Infotype in HR ABAP.
Thanks,
Kumar.

Try searching BDC for table control.
Lot of things are available you need to include that .
For Appraisal.
Check using below FM and try to develop a legacy data upload prog
RHPA_APPRAISAL_DELETE - To delete the appraisal
RHPA_APPRAISAL_ACTIVATE - To activate appraisal before modification
RHPA_APPRAISAL_READ - To change rating and status for an employee
RHPA_APPRAISAL_1045_MODIFY - To modify rating and change date for appraisal
RHPA_APPRAISAL_HISTORICIZE - To change status of appraisal to completed
Performing all actions in order should help to load appraisals.
Thanks

Custom Infotypes and Change History

HR Gurus,
I am being told that with custom infotypes, we can not track change history.
THe scenario I have is that I need to be ableto capture Address Changes (Address Line 1, Address Line 2, City, State and Zip) and send a Delta for the changed address.
In my unique situation, I have been told that if Address Line 2 is deleted, than the change histiry can not capture the fact that it was deleted and all change history regarding its prior existnace will be deleted if the Address Line2 is removed.
I am not entirely sure=, but I wanted to ask you guys anyway if I woukd be able to track Change history.
-Feroz

Hi Feroz,
Do not believe everything you hear. You can view changed and deleted information from custom infotypes and fields.
First, I am not sure why you need a custom infotype for addresses when IT0006 is available to you. You can more easily create a custom subtype if the supplied ones do not meet your needs.
But for any PA infotype including custom infotypes, you can use the Logged Changes to infotype Data report (RPUAUD00). You have to set up the infotype to be logged in the IMG: Personnel Management --> Personnel Administration --> Tools --> Revision --> Set Up Change Document. In the first section, you list the infotypes you want to track changes for including your custom infotype. In the second step you list the fields you want to track. "*" means any change to any field. And in the third step you indicate whether the information is kept as a long term or short term document.
When you run the report, you can enter the infotype and period you want and the first list will be all changes to that infotype. Select one to view the details and you will see each field listed with the original data and the new data. If a field is deleted, it will appear blank in the new area, but you can still see the old entry in the previous data column.
Also, if an individual deletes a entry in an infotype by using Copy and enters in a new start date, the old record will be delimited, but still be available for viewing. Also, every infotype records who made changes and the date of the change.
Paul

Infotypes and sub-infotypes maintanence in PPOCE

Similar Messages

Maybe you are looking for