Infotypes at the field level

Hi
Can anyone provide me the detail description on the following infotypes at the field level, as in , which all fields are present in these infotypes in SAP standard :
1. 0006 (Addresses) - Subtype Permanent residence
                                Subtype Temporary residence
2. 0022 (Education)
3. 0024 (Qualification)

Hi Reema,
      You simple goto the TCODE <b>SE 11</b>  and give the table names as <b>PA0006</b> for Address, PA0022 for Education and PA0024 for Qualification.
simple look the fields under this .INCLUDE     PS0006 (Structure) for Address ..,
for each and every field SAP has provided the Description. you will get the required information.
Regards,
Narendra.

Similar Messages

  • How to fix the field level Error(Invalid Date)

    Hi All,
    Error: 1 (Field level error)
      SegmentID: ACK
      Position in TS: 5
      Data Element ID: ACK05
      Position in Segment: 5
      Data Value: 162014
      8: Invalid Date
    can anyone help me out, How to fix above error? i searched about this but only information about the error  is given and no where it is mentioned how to fix it  and how is it generated please help me out.
    Thanks,
    Nitish

    Are you sending or receiving the EDI?
    Either way, "162014" is simply not a valid EDI data format.  Dates in x12 are expressed as CCYYMMDD so December 30, 2013 would appear as 20131230.
    If you are receiving, you need to contact the sender and have them correct the output.
    If you are sending, you need to property format that date value.  For example:
    myDateVar.ToString("yyyyMMdd");

  • TRANSPARENT TABLE REQUIRED for the field level no T CODE : MB56

    hi
    i m trying 2 get the transparent table name and field name for LEVEL NO field which is present in tcode MB56 (30F VERSION). I am getting the details in technical info 1. structure is AM07M & field name is CUSTFE. can any guide how 2 get transparent table for the level no field.
    but as of release 4.7 the field name is EXPANSION LEVEL(TCODE MB56 ).
    here also i m not getting the transparent table corresponding to EXPANSION LEVEL field.
    it would be great help if i can get assistance in this issue.
    regards

    unanswered

  • How do I restrict access at the field level in vendor creation XK01

    Hello All,
    Does anyone know a way to restrict access to a certain group of fields or a screen in vendor create? I know it is possible in vendor change XK02 using the field groups (transactions OBAT and OBAU) but we have a requirement to have one group of users create all vendor information except the bank details and another group of users just to create the bank details.
    Thanks for any help you can offer.
    rgds,
    ian

    We have had a similar discussion some while back. please refer to the thread below as it seems to be much similar to your requirement.
    [click here|Hide or Encrypt Bank Account Number]

  • Prod No validation at the field level attribute

    Hi,
    I have a qualifying table, whose field refers to one of the product number in main table. It means, I can have a product number linked to another product number defined in the main table. Hence, I have defined the text field in the qualifying table to capture this related product number.
    Now, how do I validate, if the product number entered is valid within Data Manager. Basically, it needs to validate if the product number specified is present in the main table.
    Please let me know, if any suggestions to define such validations on a free-form text field.
    Thanks,
    Surendra

    Hi Surendra,
    Make the prdt no as a unique field.If when ur gng to add any new record with the prdt no already in the main table then it will pop -up a message that record already present.
    I think this may solve the issue (acc to my understanding)
    If problem persists kindly explain the scenario in simple manner.
    Hope this amy help u.
    Rgds
    Ankit

  • Restrict material master information at the field level

    We have a requirement to restrict change access to certain material master fields, meaning everyone may be able to view the data but not change it.  Beyond that, those people who are allowed to change the data can only change certain fields...other people can change other fields (on the same material master view).  For instance a simple example would be that someone might have access to change the material description on the basic view but not the material group.  Someone else might have access to change the material group but not the description.  (Again, this is just a scenario that I'm using as an example, not as a real live case.)
    Is it even possible to do this?  I'm guessing it's not but I thought I'd ask the "experts" here before I deliver the bad news to our users.
    Thanks!

    Thank you for the information but I was aware of using screen sequence and field selection however how can I use this to allow certain users access to certain fields but not others.
    For example in the Basic view I want one set of users for the same exact material to be able to change the Base of Unit Measure while the other user can only view this field but not change it however this user can change the other fields in the Basic view.  This sounds like a solution for all fields for a particular materials.  I need to be assign fields within a view to different users.

  • Why I can not find field:Level in Project Hierarchy in BAPI_BUS2054_NEW?

    Dear experts,
        Why I can not find the field of "Level in Project Hierarchy" in structure BAPI_BUS2054_NEW?
    I only define the data to upload wbs:
    PROJECT DEFINITION
    PROJECT DESCRIPTION
    PROJECT PROFILE
    WBS Element
    WBS description
    Can you tell me which fields must to upload?
    Looking forward to your reply.
    Many thanks.
    Merryzhang

    Anyone can help me ?I need the field "Level" in BAPI_BUS2054_NEW,But I can not find it.

  • How to Raise Alerts from the fields of Mapping?

    HI,
    We had a very typical requirement for our client.
    Scenarios is IDOC to multiple files else consider a simple file to file scenario.
    Source structure contains some 5 fields and the target also remains the same 5 fields.
    Assume SERNO presents in both structures.
    The issue here is i need to check for a Target SERNO field  should accept only numerical value, there is a possibilty of coming alphanumeric and sometimes with specialcharacter appended  numeric. i have developed a udf which allows only numeric.
    The mapping is getting failed if alphanumeric or special character exists in that field.
    But, the client requires an alert mentioning that this mapping is failed due to the problem in Source SERNO field so that he can easily debug and resubmit those idocs.
    I want to know is it possible to raise alerts at field levels.
    Thanks,
    --Kishore

    Hi Raja,
    This is a new development and we dont hve any Alert framework right now exist, i believe even the alert category its not possibel to drill down to the field level.
    if its possible could you please elaborate.
    We have many fileds to check as similarly defined above example SERNO, so if the alerts are triggered @ filed level that are failed that will be a great..
    My Ultimate requirement is to notify client that due to this field the mapping was occured and alert should throw some light on to locate the error at the field level.
    Please suggest how to procced..
    Thanks,
    --Kishore

  • Data conversion is necessary at field level

    Hi everybody.
    Im a BW consultant in a BCS project, and I had to make a change in a objetct that is used in BCS as a custom attribute.
    What I made, is to remove the ALPHA routine in the object.
    Later, the BCS consultant generetad the data basis again, and now when enter the UCWB a warning is showed, the message below:
    But I dont know how to do the procedure showed in the message, does anyone face with the same problem? Any suggestion? 
    Best Regards,
    Thiago
    Field /BIC/ZC_EMPBPM: Data conversion is necessary
    Message no. UGMD418
    Diagnosis
    Following a change to the definition of field /BIC/ZC_EMPBPM it is necessary to convert the old data for this field before the new attributes can be activated. This arises, for example, when the following attributes have been changed:
    Conversion exit
    Version or time dependency of hierarchies
    System Response
    You cannot start the application. A data conversion is necessary first.
    Procedure
    Execute the necessary data conversion at the field level. To do this, press the respective button with the  symbol in the hierarchical detail display at the level of field /BIC/ZC_EMPBPM. If necessary, the system will prompt you for more information in a separate dialog box.
    Regards!
    Edited by: Thiago  França Carvalho Silveira on Jun 10, 2010 11:13 PM

    Hi,
    I quess the following should help.
    Execute UCWB01 t-code, goto your data basis, in the tabstrip for assigning roles drag and drop any characteristic, then save. The system will find the change and check and regenerate data structures (that's what you need).
    Then either in UCWB or UCWB02 t-code got your ConsArea and regenerate it.

  • Best way to author field level help for a CHM?

    Hi
    I have been asked to create an HTML help (CHM) system for a .Net application which will include context sensitive help at both page and field level.
    I have used map ids for page level help before - i.e. assigned a map id to topics and given this list to a developer for implementation, but I have never created field level help.
    I've been looking at the 'What's This?' help project wizard but am confused as to whether this is the best approach and how it fits with the project as a whole (or even if it compatible with .Net applications). Does this mean that I need two help projects for the application - one for the main help, and one for the field level help? Is there a way to create field level help without using the 'What's This?' wizard?
    I am using Robohelp 7.
    Any advice gratefully received!
    Chloe

    Hi, Chloe,
    As Peter notes, even Microsoft has backed away from using field-level Help in the last few years, so it may be worth trying to determine whether your users will benefit from having it available to them. That's not to say that you can't deliver field-level Help, however, as all the required methods for calling it are still available to .NET developers.
    To clarify, what Madcap Software calls "DotNet Help" is just a proprietary Help viewer that the company hopes will be more modern and appealing to writers than the older HTML Help (.chm) viewer. HTML Help remains the recommended format for Windows applications, whether .NET or not, and you can use any authoring tool that is capable of outputting a .chm file to create online Help for a .NET application.
    The method that your developers use to call field-level Help determines how it should be authored. If they use the standard .NET method (the SetHelpString method of the HelpProvider class), each text string is embedded in the application code itself, and not retrieved from your .chm file. More information here:
    http://msdn.microsoft.com/en-us/library/system.windows.forms.helpprovider.sethelpstring(VS .71).aspx
    http://support.microsoft.com/kb/821777
    http://helpware.net/mshelp2/demo2/h1xNET.htm
    Alternatively, developers can use the old HTML Help API to retrieve the text string from a .chm file. See:
    http://msdn.microsoft.com/en-us/library/ms670082(VS.85).aspx
    http://helpware.net/htmlhelp/how_to_whatsthis.htm
    http://support.microsoft.com/?kbid=317406
    The drawback of both methods is that the Help popups are plain text only — no graphics, text formatting, hyperlinks, etc. To work around this, some people use the third-party KeyHelp control to create feature-rich HTML popups. See:
    http://www.keyworks.net/keyhelp.htm
    This allows you to deliver the type of Help that you mentioned in your second message ("is there a way to do this so that these topics open in a small popup, without the TOC / tri-pane structure?").
    Pete

  • Field level help

    Hi,
    Is portal provide any field level help. I mean to say that when i place my mouse arrow on a field than it gives me help what it does or press some key to know what this field does. Something like ballonic help in Developer 2000 Forms.
    Thanks
    Muhammad Ijaz

    We use field-level help from within our application, Liz, and
    we use Robo v5 for our HTML Help (output in CHM). I'm not entirely
    sure how the code is written because I only do the Help System (our
    application is currently being rewritten in Dot Net and we haven't
    finalized the Help for Dot Net yet). All I do in my Robo projects
    is put the bookmark where it needs to be. The F1 command that is
    passed within the application calls that bookmark. The app is
    currently written in Progress and the code simply calls the
    module/program/bookmark. As long as the bookmark I use in Robo
    matches what the Developer calls, the field level help works
    perfectly. The only problem we ever had was when the field name
    changed in the application and nobody told us in Documentation! As
    soon as I updated my bookmarks, it worked again.
    Hope this helps. If you need more info on the commands, email
    me directly and I'll get with the Developer to ask about the
    command line the code sends to call the CHM.

  • Unable to view the Fields  inside Segment

    Hi,
    We are doing IDOC---File scenario
    We have one IDOC "WPDWGR01" in R/3 and we imported that into IR.
    When we are doing the mapping, that time we are unable to see the fields that inside this  "E1WPW02" segment.
    We have BEZEICH and VERKNUEPFG fields inside that segment.
    We loaded the metadata also freshly by deleting the existing one.And we did the SXI_Cache also
    When we Expanded (when we clicked E1WPW02 Seg )on the tree structure of the Imported IDOC from the Imported Objects, it is saying that "Schema for type WPDWGR01.E1WPW02 (category Data Type) not found"
    And we are seeing the the Segments in Red color and no fields inside those segments
    This is the Standard IDOC only, there is no Enhancements
    Regards
    Bopanna
    Edited by: BOPANNA B on Mar 11, 2008 11:49 AM

    It happens in the following case:
    1) It was being edited by somebody and you imported the IDoc at the same time. ( some segments were locked and that is why few fields were missing)
    2) check if the field level customization is done in that client , try to import it from some other client.
    Hope this helps.
    Regards.
    Jeet

  • SM30 Field level authorization check

    Hi,
    I have a requirement to add the authorization check in SM30 for the company field in the custom table. Please suggest.
    Thanks,
    Gagan Chodhry

    Hi,
    I have this requirement for both type of tables i.e. custom as well as standard. Tables has got field profit center.. I need to show the table based on the loggedin user authorization to the profit center.
    If it is a custom table then as mentioned by Siva, there is a way I heared that we can check the authorization in PAI event, but when I tried to do a small test, I could get the field symbol with the values, but I was not able to skip that record for disply.
    If anyone can send the sample or the way to skip the record based on the check.
    Also is there any other way to add the field level authorization to custom and standard tables...
    Thanks,
    Gagan Chodhry

  • How to enter values in the fields of standard SAP Infotype e.g. IT0024

    Hi,
    How to enter values in the fields of standard SAP Infotype?
    e.g. I want to enter values in infotype IT0024(Qualifications) in the field AUSPR(Profincy):-
    1-Level 1
    2-Level 2
    3-Level 3
    4-Level 4
    5-Level 5
    Thanks,
    Ameet

    Hi Divya,
    I checked with the screen and report which is mentioned by you. But I want to modify/make changes that should appear in the screen when you view details for a particualar employee in Qualifications(IT0024).
    Please refer the screen 2000 of module pool MP002400 in SE80. In that screen I want to make change as listbox with key.
    Can it be achieved in the same way as mentioned by you before by making standard SAP report as Z and then modify using layout editor?
    Please help me out. I think I am almost there.
    Thanks,
    Ameet

  • E-Recruitment - Requisition - Infotype Field Level Change Log

    Hi Experts,
    We are implementing SAP E-Recruitment, and would like to know how to capture the changes made in Requisition at infotype field level.
    For example: If a support team member is added/delete in the Requisition (Tab - Support Team), then these changes (NEW/DELETE) at the infotype field level are required.
    I have tried to maintain the infotype and the required fields in V_T582A, V_T585A, V_T585B and V_T585C. But didnt get any result when I executed the report RPUAUD00. Is there any additional configuration required for this?
    Please adivse.
    Thanks and Regards,
    Dinakaran R

    Hi,
    You can just to that with the infotype table log. Support team is stored in table HRP5131.
    Regards,
    Nicole

Maybe you are looking for