InfoView and CmcApp URLs unavailable

Hi,
we're experiencing issues  accessing both the sandpit InfoViewApp and the CmcApp
on accessing the following URL
http://hnsbosjd01s.glasgow.gov.uk:50000/InfoViewApp/logon.jsp
I am reverted back to the login screen
on accessing the following URL
http://hnsbosjd01s.glasgow.gov.uk:50000/CmcApp
I get a 503 error
Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo:
Error in starting application [sap.com/CmcApp].
If we try and access the sandpit environment via our tomcat server
(which resides on our development environment) we are also unable to
access the CMC.
There haven't been any changes recently so I'm unsure why the problem
has occurred.
I have stopped and started the system and bounced the cluster in which
it resides but to no affect. Profile parameters, environment variables, PATHs look ok
I would be grateful for any advice on this issue?
Thanks
Paul

Julian,
thanks for the reply.
to resolve the issue I had to redeploy the following:
1. CmcApp
2. CmcAppAction
3. InfoViewApp
4. InfoViewAppAction
5. PlatformServices
This is the 2nd time recently I've had to redeploy specific components on the sandpit environment. I've also had to redeply CmcApp recently on production. Have you experienced similar issues on the BOE environment?
Thanks
Paul

Similar Messages

  • Error in Viewing the report in InfoView and CMC  error #UNAVAILABLE

    Hi,
    I am using BO XI 3.1 Edge series server with latest fix packs.
    My problem is i created a webi report with Administrator account using the webi rich client tool and after creating the report i exported  to CMS . when i am trying to view the data in InfoView or CMC i get the error like #UNAVAILABLE for all of my data fields value.
    But the same thing works perfectly fine when i use the rich client tool.
    Kindly Suggest,
    Vibhav Mishra

    Hi Solved this problem ..i created the report from the infoview and everything works fine ,earlier i used the rich client to create the report

  • [XI 3.1] SSO for InfoView and OpenDocument URL

    Hi,
    We have a question with regard to SSO for OpenDocument URL.
    Can both be configured seperately?
    For example:
    - OpenDocument URL with SSO
    - InfoView without SSO
    Or does InfoView SSO needs to be configured before going to OpenDocument URL SSO?
    Thanks!
    Raf

    Hello,
    So apparently it should be possible to configure SSO only for Open document (while infoview still uses logon).
    We followed the configuration guide <Configuring Vintela SSO in Distributed Environments u2013 Complete Guide> (dec 2008).
    At this point the configuration is not functioning.
    BEFORE the SSO configuration setup : standard situation where open document url > Infoview logon screen (no error message) > authenticate manually > run the reports.
    AFTER SSO configuration.
    - When we try to access the open document url from any workstation, we get the error message "The requested resource (/ull) is not available".
    - When we try to access the open document url from the BO Server, SSO does not work but at least the open document url >  Infoview logon screen with Error message :  "Account information not recognized: Active Directory Authentication failed to log you on. Etc."  Still possible to log on manually at this stage.
    I don't find any posts / documentation concerning the "The requested resource (/ull) is not available", which seems to be the first issue to be solved.
    Any help would be appreciated, thx.

  • Somtimes Firefox loads a blank page; the Tab says "New Tab" and the URL is always "about:blank". What's up with that?

    Using Dogpile, I search and a list of URLs comes up. I select and click on one and Firefox opens a new tab. It responds promptly with a blank screen. The Tab says "New Tab" and the URL says "about:blank". The last one came up slowly in IE and turned out to be nothing more than a large pdf. Can you help me figure out what is happening and how to fix it, please? It is happening far too often. Running the virus, etc. software has not stopped this problem. Thank you very much for your help! Hutchy

    Using Dogpile, I search and a list of URLs comes up. I select and click on one and Firefox opens a new tab. It responds promptly with a blank screen. The Tab says "New Tab" and the URL says "about:blank". The last one came up slowly in IE and turned out to be nothing more than a large pdf. Can you help me figure out what is happening and how to fix it, please? It is happening far too often. Running the virus, etc. software has not stopped this problem. Thank you very much for your help! Hutchy

  • Creating a service ; What needs to be added to tnsnames.ora and JDBC url?

    DB version: 11.2.0.2
    OS platform : Solaris 10
    We have a 2 node RAC.
    DB name   = mbsprd
    Instance1  = mbsprd1
    Instance2  = mbsprd2I want Instance 1 (mbsprd1) to be used for our OLTP application and Instance 2 (mbsprd2) to be used for another application of DSS nature.
    Based on the syntax
    srvctl add service -d <dbname> -s <ServiceName> -r <Preferred Instance> -a <Available Instance>I am going to create 2 services
    -- Creating a service called OLTP
    srvctl add service -d mbsprd -s OLTP  -r mbsprd1 -a mbsprd2-- Creating a service called DSS
    srvctl add service -d mbsprd -s DSS  -r mbsprd2 -a mbsprd1-- Starting the services
    srvctl start service -d mbsprd -s OLTP
    srvctl start service -d mbsprd -s DSSI guess the above steps are enough to configure a service at the server side.
    I would like to know what needs to be done at the client side.
    Currently the tnsnames.ora file and JDBC url used by our clients are shown below. What needs to be added to tnsnames.ora file and jdbc URL to start using services configured above?
    -- SCAN based TNS entry
    mbsprd =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (COMMUNITY = tcp.world)
            (PROTOCOL = TCP)(Host = p148149-scan.tpam.net) (Port = 36964))
        (CONNECT_DATA =
          (SERVER       = DEDICATED)
          (SERVICE_NAME = mbsprd)
          (FAILOVER_MODE=(TYPE=SELECT)(METHOD=BASIC))
    -- TNS entry based on local listener
    -- Instance 1
    mbsprd1 =
    (DESCRIPTION =
       (ADDRESS_LIST =
       (ADDRESS =(PROTOCOL = TCP)(HOST = hsolarp148-vip)(PORT = 36973))
       (CONNECT_DATA =
             (SERVICE_NAME = mbsprd)
             (INSTANCE_NAME = mbsprd1)
    -- Instance 2
    -- TNS entry based on local listener
    mbsprd2 =
    (DESCRIPTION =
       (ADDRESS_LIST =
       (ADDRESS =(PROTOCOL = TCP)(HOST = hsolarp149-vip)(PORT = 36973))
       (CONNECT_DATA =
             (SERVICE_NAME = mbsprd)
             (INSTANCE_NAME = mbsprd2)
    )JDBC entry for RAC
    jdbc:oracle:thin:@p148149-scan.tpam.net:36964:mbsprd -- Alternative version used by some clients because the above had 'some issues'
    jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=TCP)(HOST=p148149-scan.tpam.net) (PORT=36964))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=mbsprd)(FAILOVER_MODE =(TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 10))))

    OLTP =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = p148149-scan.tpam.net)(PORT = your_port_number))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = OLTP)
    DSS =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = p148149-scan.tpam.net)(PORT = your_port_number))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = DSS)
      )JDBC entry for RAC
    jdbc:oracle:thin:@p148149-scan.tpam.net:36964:service_name
    jdbc:oracle:thin:@new_tns_entry_description(if you would like to connect the database with particular service)
    try this and let us know any issues,

  • How to get anonymous guest link "View Only" and "Edit" URL using JSOM or Search API ?

    Hi,
    I need to get list item anonymous guest link View Only and
    Edit URLs (as shown in image below) using JSOM or SharePoint 2013
    Search API.
    the URL will be like this - https://<site URL>/_layouts/15/guestaccess.aspx?guestaccesstoken=yRaYGmE9n
    Any one has any idea how to do achieve this?
    Thanks
    Shakir

    Hi Shakir,
    To get the anonymous guest link “View Only”, we can use SP.ObjectSharingInformation.anonymousViewLink property in sp.js.
    https://msdn.microsoft.com/en-us/library/office/jj246826.aspx
    To get the anonymous guest link “Edit”, we can use SP.ObjectSharingInformation.anonymousEditLink property in sp.js.
    https://msdn.microsoft.com/en-us/library/office/jj246468.aspx
    We can also use REST API to get the guests links:
    _api/web/Lists/getbytitle('library name')/items(item id)/GetObjectSharingInformation?$expand=SharedWithUsersCollection&retrieveAnonymousLinks=true
    Thanks,
    Victoria
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

    Hello,
    SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
    I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
    * Foundation Services
    * HFM
    * FDM
    Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
    While configuration,
    1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
    2) Also, I selected to configure Oracle HTTP server as web server.
    Both these steps were successful.
    But SharedServices and Workspace URL's are not working. Getting 404 error.
    SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
    Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
    When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
    Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
    Can anyone please suggest a solution for this.
    ####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
    ####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
    Thanks in advance.
    Tej

    Hi John,
    today's update:
    * Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
    * During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
    * Started EPM system.
    * checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
    * Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
    ####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
    weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
         at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    ####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
    ####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
    weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
         at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    Can you please suggest how to overcome this error of Weblogic?
    Thanks in advance,
    Tej

  • I want to create an external video widget with iAd. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.

    i want to create an external video widget with iAd to use in an iBook. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.
    hope someone can help!

    May have something to do with whether or not the URL can be reached while building your widget.  I've got a video on the web. When I enter the URL into the field for the video object and click to another field,  the URL is replaced with some text indicating that it is accessing the video then updates itself to displaying just the name of the video file.
    It shows just fine in preview and I can see the full path to the video when I export the widget so it should work for you. 
    Is the video accessible from your Mac while you're laying out your widget?
    -Mark

  • "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct". Performance Point Dashboard Designer (SP 2013), SSRS 2012 Report.

    Hello Everybody,
    I am using Sharepoint server 2013 , SQL Server 2012 SP1, PerfomancePoint and Reporting Services in SharePoint integrated mode.
    I built one report in SSDTusing an Analysis Services Cube. This report has 3 parameters. So the idea is use Dashboard Designer to use this SSRS Report and connect it with some PP Filters.
    The issue is that I am always obtaining "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct".
    I have the following settings in the PP Report:
    Server Mode: SharePoint Integrated
    SharePoint Site: http://MySharrepointSite:PortNumber/sites/bicenter
    Document library : Documents (selected from drop down, my report is deployed to document library)
    Report : report.rdl
    When I select the report from drop down list its giving the error in a pop up message box as "Unable
    to find report specified by URL,Please verify that both Server URL and Report URL are correct".
    I have tried to use the most simple report, only with one parameter, but is always displaying the error above.
    When I open the report directly from documents library its working fine and even it is working fine (
    when I deployed the report) but the issue is parameters are not showing.
    Any idea? Please help.
    Thanks in Advance.

    "Unable to connect to the server at CALYSTO\ReportService.
    Hello Tom,
    It should be "ReportServer" in the URL, not "ReportService".
    In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
    go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • How to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser

    how to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser or How can we able to set our custom default log to the sp2013 site using code.So that users are not allowed to change from browser again.
    Thanks &amp; Regards, Krishna

    Hi  Krishna,
    For your issue, you need to deploy a farm solution using HideCustomAction to hide site settings link. For example to hide “Title, description, and logo” link you can use below code:
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <HideCustomAction
    GroupId="Customization"
    HideActionId = "ProjectSettings"
    Location = "Microsoft.SharePoint.SiteSettings">
    </HideCustomAction>
    </Elements>
    Reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92f002b7-0e9c-424e-836a-de40c4e5d81f/hide-option-from-site-settings-page-in-sharepoint-2010?forum=sharepointdevelopmentprevious
    http://blog.milanchauhan.com/2013/06/add-custom-section-in-site-settings.html
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Unable to activate internal and external urls at the same time

    Hi,
    We have Configured EBS R12 in DMZ setup as described in Figure F-9 of metalink note 380490.1 ,Option 2.4: Using Reverse Proxy with no External Web Tier.
    refering to 726953.1 Case History: Implementing a Reverse Proxy Alone in the DMZ Configuration - R12.
    but Not able to activate internal and external urls at the same time in this configuration. Only the node where last autoconfig was run getting activated as web node.
    When trying to accees the url of the other node it gets redirected to the url (where autoconfig is last run).and for this error observed is Error Code:502 Proxy Error.The specified Secure Sockets Layer (SSL) port is not allowed.(12204).
    For both external and internal services are UP.opmn status is live no error.
    Using Apache as reverse proxy.
    EXTERNAL Reverse proxy settings:
    s_login_page http://LONWEB01.process.com:81/OA_HTML/AppsLogin
    <TIER_DB oa_var="s_isDB">NO</TIER_DB>
    <TIER_ADMIN oa_var="s_isAdmin">NO</TIER_ADMIN>
    <TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
    <TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
    <TIER_NODE oa_var="s_isConc">NO</TIER_NODE>
    <TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
    <TIER_NODEDEV oa_var="s_isConcDev">NO</TIER_NODEDEV>
    <TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
    INTERNAL Middle Tier settings:
    s_login_page http://stprojapp01.test.com:8005/OA_HTML/AppsLogin
    <TIER_DB oa_var="s_isDB">NO</TIER_DB>
    <TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
    <TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
    <TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
    <TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
    <TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
    <TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
    <TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
    Are we missing anything....
    Thanks & Regards

    Hi,
    Finally it's resolved...Following is the solution thought to share in the forum:
    The configuration of the E-Business Suite environment for DMZ requires profile options hierarchy type to be set
    to SERVRESP.
    To change the profile options hierarchy type values to SERVRESP, execute the following SQL script as
    shown below:
    sqlplus / @/patch/115/sql/txkChangeProfH.sql SERVRESP
    After successfully completing the above sql script, run Autoconfig in all nodes to complete the profile options configuration.
    It's resolved after doing this..

  • Infoview and java 1.6.0_16

    We have Crystal Reports Server 2008 InfoView and another web application running on the same Tomcat installation.  Recently upgrading the corresponding version of java to 1.6 build 16 caused Infoview to throw a HTTP 500 error when trying to view any reports.  Is there any known guidance to an issue like this?  We are now discussing leaving the BOE Tomcat/Java installation to handle Infoview and installing a separate instance of Tomcat/Java for the other application.  Recommandations?
    VR,
    Chad

    We have been running 1.6 update 12 without any problems.  We have only encountered problems when we recently updated to update 16. 
    For security purposes we are unable to use 1.5 because of some security flaw.

  • Get site collection url, site url and list url from a full uri?

    If I have incoming: only URI's of the format http://a.b.c/d/e/f/g/h/i/j/k/l/m/n/o/p.docx
    (And these are coming from multiple farms and multiple site collections) (and i have a web api on some remote server) (and have all the authentication details)
    And I want to query just the single the item via csom : check one column and if value="yes" then download the doc:
    a. how do i get the absolute site url out of it for " clientcontext ctx = new clientcontext(THISURL) "
    b. how do i then get the list uri out of it to push a caml query to to then retrieve it
    I could :
    a. strip off the filename, that is the easy part :)
    b.  I could paste "/_api/contextinfo" behind it and POST it first as a httprequest. Then first get the site and web url and later on
    find a way to find the list url (which is probably the first item behind the fullWebUrl), but it seems weird to mix this in the mix
    Basically im looking for something that tells me what is what in http://a.b.c/d/e/f/g/h/i/j/k/l/m/n/o/p.docx

    Sorry, GetList is only available in the O365 version of Microsoft.SharePoint.Client. If you could test for a root site collection and if there is not one then take the scheme ... + Uri.segments[0] and then get the context. After that you can use
    the GetFileByServerRelativeUrl. The following demonstrates this.
    public static void GetFileList()
    string fileUrl = "http://basesmc15/teamonesubone/teamsubonesubone/Shared%20Documents/folderholder/newauthor6.pdf";
    Uri fileUri = new Uri(fileUrl);
    Uri webUrl;
    ClientContext rootContext = new ClientContext(fileUri.Scheme + Uri.SchemeDelimiter + fileUri.Host);
    webUrl = Web.WebUrlFromPageUrlDirect(rootContext, fileUri);
    ClientContext subContext = new ClientContext(webUrl.ToString());
    File file = subContext.Web.GetFileByServerRelativeUrl(fileUri.AbsolutePath);
    List list = file.ListItemAllFields.ParentList;
    subContext.Load(list);
    subContext.ExecuteQuery();
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • New Qos and Firewalls URL Options for gamers for Win10

    This is more of a gamer thing.
    I'm wondering if there's a way to implement URLs ( instead of IPs ) with ports into Firewalls and QoS? Naturally I don't want to open ports for all IPs and determining all IPs for some sites, when there exist are multiple worlds, can't always be determined.
    It would be nice to say, for all *.SomeGame.com allow this port to be open.
    Additionally, if this rule is active, give it higher priority than video or voice....
    I have seen some gamer systems where their router and firewall have an open port for their games :\ Also, usually most gamers will have Skype/Twitch/Netflix/Hulu open whilst gaming. Naturally, they don't want lag for their games, and would prefer their gaming
    to have priority over any voice or video.

    You do not need to setup anything like that in any windows for gaming application...even if I running torrent + dc++ client I have no lags or freezes so on. So if you want to setup QoS just find appropriate guide for specific application. And
    btw URL's doesn't match game server IP's & port's ranges, so it is never been released under QoS development. Cause QoS is about how to manage your existing LAN bandwidth for applications on your OS installation.

  • Later - save and manage URLs to be opened later

    later is a small (242 sloc) perl script that saves and manages URLs to be opened later.
    GitHub repo
    AUR package (-git)
    dependencies
    perl
    optional dependencies (see -t command-line option)
    curl
    perl-html-parser
    command-line options
    later [options] [URL] [memo ...]
    General options:
    -h, --help print this message and exit
    -v, --version print version and exit
    -q, --quiet disable output
    -f FILE file on which to operate (default is $HOME/.later)
    Add options:
    -a append entry to FILE (default is prepend)
    -t add URL title to entry (requires curl, HTML::Parser)
    Open options:
    -o NUMBERS* open entries with given NUMBERS
    -O ENTRY open given ENTRY
    -k keep entries after opening (default is remove)
    Manipulate options:
    -l [d] list contents of FILE with numbered lines,
    descending if d is given (default is ascending)
    -r NUMBERS* remove from FILE entries with given NUMBERS
    *accepts a range of numbers separated by a hyphen (e.g. 1-9)
    example entry
    arch linux is best linux >>> Arch Linux >>> https://www.archlinux.org/ >>> Sat, 26 Jan 2013 00:04:44 EST
    potentially useful scripts
    Copy URL from clipboard and use dmenu to prompt for memo:
    #!/bin/bash
    later -q -t "$(xsel -b)" "$(dmenu -p memo: <&-)"
    Pipe file into dmenu and open selected entry:
    #!/bin/bash
    if [[ -f "$1" ]]; then
    FILE="$1"
    else
    FILE="$HOME/.later"
    fi
    later -q -O "$(dmenu -l 30 < $FILE)"
    I bind both of the above scripts to keys using my window manager of choice.
    Hopefully someone else will find this useful!

    It's a good idea that should be submitted to Apple's developers. (Submitting ideas in these forums might or might not get to the right people, while submitting feedback via Apple's forms will get channeled appropriately.)
    In a pinch, you could approximate what you're looking for by bookmarking all of your open tabs into a new folder in your bookmarks, then using the option to "Open in Tabs" when accessing that folder in the Bookmarks menu. That's certainly clumsy compared to a simple one-click "save state" method that you're requesting, but it's something....

Maybe you are looking for