Infoview and java 1.6.0_16

We have Crystal Reports Server 2008 InfoView and another web application running on the same Tomcat installation.  Recently upgrading the corresponding version of java to 1.6 build 16 caused Infoview to throw a HTTP 500 error when trying to view any reports.  Is there any known guidance to an issue like this?  We are now discussing leaving the BOE Tomcat/Java installation to handle Infoview and installing a separate instance of Tomcat/Java for the other application.  Recommandations?
VR,
Chad

We have been running 1.6 update 12 without any problems.  We have only encountered problems when we recently updated to update 16. 
For security purposes we are unable to use 1.5 because of some security flaw.

Similar Messages

  • Unable to connect to CMC and Java Infoview

    Hi
    I am unable to connect to CMC and Java Infoview. When I am attempting to connect, then the following message is displayed.
    "Oops! Internet Explorer could not connect to <web server>:<port number>"
    Please give me some suggestions.
    Thanks!

    Hi Stratos
    I uninstalled the designer and repaired Crystal Reports Server. But it did not help.
    The CMS is running now. But I cannot find all the other services and I am getting the same error when I try to open CMC or InfoView.
    I found some of these errors in my system's event viewer:
    NT Service message: NT Service Initialization Problem.
    The root server reported an error Initialization Failure.
    The source for both these errors is BusinessObjects_CMS.
    Please suggest something
    Thanks

  • SAP GUI and Java reqs

    I am putting together some documentation for the Java requirements for SAP applications on RHEL5 for customers.
    Can someone sanity check this for me please?
    The SAP GUI requires at least Java 1.5 to run, so a customer should install the Java 1.6.0_16 version from Sun.
    1.Download the Sun JRE from http://www.java.com/en/download/manual.jsp.
    2.Install the Sun JRE.
    3.Set the PATH variable so that the Sun JRE is the default version of Java. You can verify this with the java u2013version command.
    4.Install PlatinGUILNX_9.JAR from SAP to install the SAP GUI.
    The SAP engine on the other hand requires version 1.42 JDK. Moreover, the only JDK supported for 64-bit Linux is the IBM version.
    1. RHEL 5.4 and newer ships with the right IBM JDK so install the IBM JDK. By default, it will install in /opt, so we show the path for the IBM JDK as /opt/IBMJava2‑amd64‑142 in our instructions.
    2.SAP NetWeaver 7.0 requires strong encryption. You need to obtain and install the Java Cryptography Extension (JCE) Unlimited Strength Jurisdiction Policy Files for the IBM JDK you are using beforehand starting the installation. Register to download the JCE files at https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=jcesdk and download the ZIP file from https://www14.software.ibm.com/webapp/iwm/web/reg/pick.do?source=jcesdk&lang=en_US.
    2.The file you download is named unrestricted.zip. Copy the file named unrestricted.zip to /opt/IBMJava2‑amd64‑142/jre/lib/security directory.
    Do not unzip the file. Instead, copy the archive.

    Hi,
    That's a good documentation, but what do you mean with
    4.Install PlatinGUILNX_9.JAR from SAP to install the SAP GUI.
    You should post where to download that file, some days ago I downloaded a new version of SAPGui for Java ( 720 ), I don't know what version of SAPGui for Java is PlatinGUILNX_9 or where  can I download that version, I downloaded my SAPGui for Java from:
    ftp://ftp.sap.com/pub/sapgui/java/
    You can see different versions and releases... 720.

  • Whats is difference between Java JRE  and  Java SDK

    Hi,
    what is the difference between Java JRE and Java SDK...
    i think both of them have the same set of files to be installed...
    I am not able to understand where they differ

    The JRE (Java runtime Environment) contains just the stuff necessary to run Java and the SDK (System Development Kit) contains the extra stuff necessary (and also helpful) to develop in Java.

  • What is difference between C# Gzip and Java swing GZIPOutputStream?

    Hi All,
    I have a Java swing tool where i can compress file inputs and we have C# tool.
    I am using GZIPOutputStream to compress the stream .
    I found the difference between C# and Java Gzip compression while a compressing a file (temp.gif ) -
    After Compression of temp.gif file in C# - compressed file size increased
    while in java i found a 2% percentage of compression of data.
    Could you please tell me , can i achieve same output in Java as compared to C# using GZIPOutputStream ?
    Thank a lot in advance.

    797957 wrote:
    Does java provides a better compression than C#?no idea, i don't do c# programming. and, your question is most likely really: "does java default to a higher compression level than c#".
    Btw what is faster compression vs. better compression?meaning, does the code spend more time/effort trying to compress the data (slower but better compression) or less time/effort trying to compress the data (faster but worse compression). most compression algorithms allow you to control this tradeoff depending on whether you care more about cpu time or disk/memory space.

  • What is the diffrence between package javax.sql and java.sql

    Is javax designed for J2EE?
    And when to use package javax?

    Hi,
    What is the diffrence between package javax.sql and java.sql?The JDBC 2.0 & above API is comprised of two packages:
    1.The java.sql package and
    2.The javax.sql package.
    java.sql provides features mostly related to client
    side database functionalities where as the javax.sql
    package, which adds server-side capabilities.
    You automatically get both packages when you download the JavaTM 2 Platform, Standard Edition, Version 1.4 (J2SETM) or the JavaTM 2, Platform Enterprise Edition, Version 1.3 (J2EETM).
    For further information on this please visit our website at http://java.sun.com/j2se/1.3/docs/guide/jdbc/index.html
    Hope this helps.
    Good Luck.
    Gayam.Srinivasa Reddy
    Developer Technical Support
    Sun Micro Systems
    http://www.sun.com/developers/support/

  • What is the diffrence between My Runnable Interface and Java Runnable

    Hi folks
    all we know that interfaces in java just a decleration for methods and variables.
    so my Question is why when i create an interface its name is "Runnable" and i declared a method called "run" inside it.then when i implements this interface with any class don't do the thread operation but when i implement the java.lang.Runnable the thread is going fine.
    so what is the diffrence between My Runnable Interface and Java Runnable?
    thnx

    Hi folks
    all we know that interfaces in java just a decleration
    for methods and variables.
    so my Question is why when i create an interface its
    name is "Runnable" and i declared a method called
    "run" inside it.then when i implements this interface
    with any class don't do the thread operation but when
    i implement the java.lang.Runnable the thread is going
    fine.
    so what is the diffrence between My Runnable Interface
    and Java Runnable?
    thnxClasses and interfaces are not identified by just their "name", like Runnable. The actual "name" the compiler uses is java.lang.Runnable. So even if you duplicate the Runnable interface in your own package, it's not the same as far as the compiler is concerned, because it's in a different package.
    Try importing both java.util.* and java.awt.* (which both have a class or interface named List), and then try to compile List myList = new ArrayList();

  • Java SE and Java EE

    I am a IT graduate and I still need some clarification on the relationship between Java SE and Java EE API. Does EE include SE?
    For application development, I know I can use only SE without the EE, but can I use EE alone without SE?
    Any good articles addressing my questions?
    Thank you very much
    R

    Java EE in fact extends java SE, its primarily aim is to simplify developing multitier enterprise applications (Java SE provides all the necessary basic libraries etc.)
    Because Java EE is an extension of Java SE, you cant use EE without SE - without SE there is no EE.

  • SSO between Portal and Java WD application

    Hi Experts,
    I am using CE 7.2 on localhost and I am very new to SAP.
    I need to know how can I get SSO between Portal and Java WD.  I have a WD application that displays the logged in user using "IUser currentUser = WDClientUser.getCurrentUser().getSAPUser()", as well I can use "IUser user = UMFactory.getAuthenticator().getLoggedInUser()".  Both work.
    Q1. What is the difference in the 2 above?
    Q2. My WD application is set to authenticate user.  The WD application is in URL iView.  I need SSO between Portal and WD application.   Is there a way to get this SSO without SAP Backend (ECC), for now I just need SSO between Portal and Java WD appl.
    Everything is in localhost.
    Please advice. Thanks.

    > need to know how can I get SSO between Portal and Java WD.
    Then I suggest you ask your question in the Web Dynpro Java forum instead of the Web Dynpro ABAP one.

  • J2me and java card, need help to communicate

    we are trying to put together a reader to read smartcards using j2me and we figure that it would be easiest if we could develop it to work with java cards rather than standard smart cards, the problem is we get garbage when we communicate to it, the chip sends us crap, any suggestions what might be wrong, any calls we might be missing, has anyone worked with j2me and java cards or smart cards, any help would be appreciated.
    einar

    .... reader app and the ME behind it .... smells like mobile ....
    First of all - if you want to have one mobile application running on this just make sure that whatever is written in ME can use drivers from the reader chip ....
    Workin on the PC is something completely different. There was one good example how to develop one host application in Java provided with the JCOP tools long ago ... I don't know if this is now in the new Eclipse tools.
    But - there was a small API provided that can give you good hints what to do - and - once you have it on the reader side - you can easily integrate ME methods with this ...

  • Eclipse 3.4 and Java 6 compatibility

    Hi All,
    I have a tomcat plugin inside Eclipse 3.4.2. Recently I upgraded from Java 5 to Java 6. When I try to start Tomcat from Eclipse,I get the following error:
    Error occurred during initialization of VM
    java.lang.UnsatisfiedLinkError: java.lang.Float.floatToIntBits(F)I
         at java.lang.Float.floatToIntBits(Native Method)
         at java.lang.Math.<clinit>(Math.java:801)
         at sun.net.www.ParseUtil.lowMask(ParseUtil.java:512)
         at sun.net.www.ParseUtil.<clinit>(ParseUtil.java:559)
         at sun.misc.Launcher.getFileURL(Launcher.java:388)
         at sun.misc.Launcher$ExtClassLoader.getExtURLs(Launcher.java:165)
         at sun.misc.Launcher$ExtClassLoader.<init>(Launcher.java:137)
         at sun.misc.Launcher$ExtClassLoader$1.run(Launcher.java:121)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.misc.Launcher$ExtClassLoader.getExtClassLoader(Launcher.java:118)
         at sun.misc.Launcher.<init>(Launcher.java:51)
         at sun.misc.Launcher.<clinit>(Launcher.java:39)
         at java.lang.ClassLoader.initSystemClassLoader(ClassLoader.java:1304)
         at java.lang.ClassLoader.getSystemClassLoader(ClassLoader.java:1286)
    Kindly suggest what needs to be done? If I am posting it in a wrong forum please suggest me the right one too.
    I would like to know if Eclipse 3.4 and Java 6 are compatible or not.
    Thanks in advance.

    ShubhaPradeep wrote:
    I have a tomcat plugin inside Eclipse 3.4.2. Recently I upgraded from Java 5 to Java 6. When I try to start Tomcat from Eclipse,I get
    Error occurred during initialization of VM
    java.lang.UnsatisfiedLinkError: java.lang.Float.floatToIntBits(F)IAre we talking 64-bit Linux?
    I had issues launching eclipse on CentOS 5 64-bit and Sun JDK 1.6,
    resolved by launching eclipse with the -vm option specifying Sun JDK 1.5 java.
    [https://www.centos.org/modules/newbb/viewtopic.php?post_id=95784&topic_id=11661]

  • Problem with win2000sp3 and Java web start

    I have JRE and Java web start (1.2.0_01, build b01) which come downloading file j2re-1_4_1_01-windows-i586-i.exe from sun.
    I have win2000pro running on my PC.
    I had updated win2000 to service pack 2 and everything was fine.
    Now i decided to update to service pack 3 (in the process I also updated other components) from Microsoft and:
    1) Java applets seem to be running fine within i.e.
    2) If i try to run an application from java web start my PC freezes and I have to restart it.
    3) Staroffice 6.0, which runs on Java, seems to be fine.
    I reinstalled both sp3 and jre etc, with no result.
    Is this a known problem?
    Thanks to all.
    Maurizio

    I suspect that you have hit a known problem with Swing on Java 1.4.1 with buggy video drivers. Do you have an ATI card? They are the worst offenders. ATI released new drivers for its Radeon line today. They fix the problem.

  • Problem with JSP and Java Servlet Web Application....

    Hi every body....
    I av developed a web based application with java (jsp and Java Servlets)....
    that was working fine on Lane and Local Host....
    But when i upload on internet with unix package my servlets and Java Beans are not working .....
    also not access database which i developed on My Sql....
    M using cpanel support on web server
    Plz gave me solution...
    Thanx looking forward Adnan

    You need to elaborate "not working" in developer's perspective instead of in user's perspective.

  • Report Script returns no data and "java.io.FileNotFoundException" error

    When attempting to write to a new file (Eg: C:\TEST.txt), Report Script returns no data and "java.io.FileNotFoundException" error occurs.
    This error occurs only in Essbase 9.3.1.3 release, however it works fine in release 9.3.1.0.
    After running the report the script, it pops up the follwing message:
    "java.io.FileNotFoundException: ..\temp\eas17109.tmp (The system cannot find the file specified): C:\TEST.txt"
    When checked the TEST.txt, it was empty.

    Sorry folks, I just found out the reason. Its because there was no data in the combination what I was extracting.
    but is this the right error message for that? It should have atleast create a blank file right?

  • I continually get a Java error. I've uninstalled and reinstalled firefox and nothing has helped. I've updated flash and Java.

    I have used Firefox as my default browser for many years. I've recently started getting a Java error message. It pops up continually. I have updated flash and java. I have uninstalled and re-installed Firefox and nothing has helped. I have had to start using Chrome instead of Firefox which I don't care for but I don't have the java error with Chrome. How do I fix this problem? The error reads as follows:
    Java Script Application
    Error: syntax error

    Your '''JavaScript''' error has nothing to do with the Java plugin . It is likely caused by an added extension (the earlier forum threads [/questions/944619] and [/questions/943088] mention disabling or updating the Social Fixer extension will resolve the problem).
    You can read this article for help troubleshooting your extensions: [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Maybe you are looking for