[Infoview - BOXI3.1] Error when attempting to schedule a crystal report

Hi,
I have an error, when i attempt to schedule a report. When i click on the "Format" link I get the error below:
An error has occurred:Item SI_XSLT_INFO was not found in the collection.
Googling this error suprisingly returns no results! I have no idea what could be at fault and would love to get some help from any experts! I am a very new user to business objects enterprise.
Thanks a lot in advance,
Dom

Hi Friend,
I faced the same problem while scheduling the crystal report in BO XI R3 Infoview.
How I resolved it is by publishing(Using Publishing Wizard) the crystal report in the BO XI R3 enterprise and then scheduling. It worked fine.
The crystal report which I created was in Crystal Reports XI and the new BO XI Infoview supports Crystal Reports 2008.
I think this might be the problem.
Thanks and Regards

Similar Messages

Error when attempting to create new Crystal Report against SAP BW

We're getting an error when attemptiing to create a new report using the SAP toolbar in CR:
"Failed to retrieve SSO2 logon ticket. Please contact your BW administrator".
Any ideas? We're able to run existing reports fine. Just can't create new ones using the toolbar.

Hi,
but you do realize that it is a pre-requisite ?
your BW system needs to be configured for reading and generating SSO token
Ingo

Get error when add new object in crystal report

hi
i have this error "You are attempting to use functionality that falls under the Crystal Decisions Report Creation API license. This system does not have a valid license, or the evaluation copy of the license has expired. Please contact Crystal Decisions to obtain a Report Creation API license."
when i add new object in crystal report with vb.net
""CRReport.Sections.Item(ii).AddTextObject("new text", 1000, 0)
i do same program for 3 months ago but i lost it work without error
ihave a license key for crystal report
use cr10 with vb.net 2005
can help me
thanks

Also, check out the blog [Use of the Report Designer Component (RDC) in VS .NET|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID0468837450DB00359707053703393347End?blog=/pub/wlg/15939].
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Error:When adding RDC runtime library (Crystal report XI R2) to Lotus notes

Background : We have reporting feature implemented in one of lotus notes application using crystal reports 6 (OCX) and as Crystal report is going to be upgraded to CR XI version in my organisation, we need to implement the same using RDC component available in crystal XI . we have installed Crytal report XI R2 - SP 6 version for testing the integration.
we are referring a document available on SAP web site(attached below) that illustrates the steps required to integrate the Crystal Reports® Report Designer Component into a Lotus® Dominou2122 application. http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/509b02de-a81e-2b10-f598-822b6d6f2024?quicklink=index&overridelayout=true
Steps which have been outlined for adding runtime library in lotus domino application is shown below:-
1. In Domino Designer, add a Form to the application.
2. In the programmeru2019s pane, go to the (Declarations) handler of the Form and enter:
Dim App As Variant, Dim Rep As Variant
3. Select Create | Object and select the u201CControlu201D radio button in the u201CCreate Objectu201D dialog box that comes up. From the list of controls, select u201CCrystal Report Viewer Control.u201D This adds the control to the Form.
4. Click on the control and select Edit | Properties. In the u201CAppletu201D properties dialog, select the u201CSize object to fit windowu201D radio button and then close the properties dialog.
We are getting an error message while trying to add 'Crystal Report Viewer Control' control (illustated in Step 3 above) in the lotus notes form . Error message which we get is 'An error has occured while processing a request on an object'.
Alternatively , we created the object of Crystal Report Viewer on lotus notes form by adding viewer object file (Crviewer.dll) from the file system after selecting the u201CObject from a fileu201D radio button in the u201CCreate Objectu201D dialog box and added following code in the postopen event of lotus notes form .
Set m_Viewer = Source.GetObject("Crystal Report Viewer Control")
Set App = CreateObject("CrystalRuntime.Application")
Set Rep = App.OpenReport(u201Cc:lotus
otes
ep.rptu201D)
Set m_Viewer.ReportSource = Rep
Again, when lotus notes form is opened , it gives error 'Variant does not contain object' at 'Set m_Viewer.ReportSource = Rep' .
Can any one suggest us any workaround or if iit is not possible in CR XI R2 into a Lotus® Dominou2122 application. Also, can any one provide us sample code if CR 2008 version can be integatred with lotus notes.

I believe, Lotus was never a "supported" development platform, though it did work - at one time or another. Eventually it did not and you are at that point. I think it was CR 10 where it started to be impossible to add the viewer to Lotus. This was never fixed and we never did find out if this was a Lotus thing or a CR thing.
Re. CR 2008 and Lotus. The RDC has been retired in CR 2008, so no luck there either for you. The only SDKs available in CR 2008 are for .NET and Java.
Ludek

Error when try to schedule a Webi Report

Good day every one:
Can anyone please help me to solve this problem??? the issue is this, I want to schedule a Webi report but when i clic on Schedule and go to Format and Destinations tab, i got this message:
displayErrorMessage="VIEWER:VIEWER_ERR_DEFAULT (Error: INF )"; traceErrorMessage="\u003Cinput type="hidden" name="BENCHERROR" value="Error Number : - Error Description : VIEWER:_VIEWER_ERR_DEFAULT"\u003E";
And i can not see the formats availables to schedule the report and of course i can not see the configuration and destinations options.
Looking for an answer i found this:
http://forums.sdn.sap.com/thread.jspa?threadID=1537527
but that is an old post and i can not find the file mentioned there, can somebody please help me to fix this???
We are using:
BOBJ 3.1 SP3
Windows Server 2003
32 bits
Regards

I just found this
I was able to fix the issue by replacing the webiviewer.properties file with the file from the WARFILES\WEBAPPS directory. The webiviewer.properties file looks like it was corrupt as there was only 1 line in the file. After replacing and restarting the servers there's no longer an error when selecting Formats & Destinations.
I checked those webiviewer.properties and like you , one of them had only 1 line, about the language.
So I replace the one from Tomcat55\webapps\AnalyticalReporting\WEB-INF\classes with the one in the folder Tomcat55\webapps\AnalyticalReporting\classes
My guess is that this properties is corrupted because of the installation of other language. What should be done is updating the file with the new language parameters but what is done is a replace of the file.
I foun that in this link
http://www.forumtopics.com/busobj/viewtopic.php?t=150796&sid=bad10669f42c6de2b77e37b03122334d
I will apply this and if im success i let you know
Regards
Edited by: Elio Javier Guzman Hernandez on Oct 21, 2011 6:25 PM
Well the solution that i gave you works fine.
Regardas
Edited by: Elio Javier Guzman Hernandez on Oct 21, 2011 10:42 PM

Exception-Error when excecuting JSP-File in Crystal reports for Eclipse

Hi,
I have created a jsp-File from an rpt-File in Crystal report for Eclipse. When I start the jsp-File on Apache Tomact 5.5 then only errors occurs.
Coud anyone help me?
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP:
An error occurred at line: 6 in the generated java file
Only a type can be imported. com.crystaldecisions.report.web.viewer.CrystalReportViewer resolves to a package
An error occurred at line: 7 in the generated java file
Only a type can be imported. com.crystaldecisions.reports.sdk.ReportClientDocument resolves to a package
An error occurred at line: 8 in the generated java file
Only a type can be imported. com.crystaldecisions.sdk.occa.report.application.OpenReportOptions resolves to a package
An error occurred at line: 9 in the generated java file
Only a type can be imported. com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase resolves to a package
An error occurred at line: 10 in the generated java file
Only a type can be imported. com.crystaldecisions.sdk.occa.report.reportsource.IReportSource resolves to a package
An error occurred at line: 13 in the jsp file: /Bericht1-viewer.jsp
ReportClientDocument cannot be resolved to a type
10:      try catch (ReportSDKExceptionBase e)
60:
An error occurred at line: 58 in the jsp file: /Bericht1-viewer.jsp
e cannot be resolved
55:
56:
57:      } catch (ReportSDKExceptionBase e)
60:
61: %>
Stacktrace:
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:93)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.26 logs.
Apache Tomcat/5.5.26
Bericht1.jsp:
<%@page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.application.OpenReportOptions,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%><%
     // This sample code calls methods from the JRCHelperSample class, which
     // contains examples of how to use the BusinessObjects APIs. You are free to
     // modify and distribute the source code contained in the JRCHelperSample class.
     try {
          String reportName = "Bericht1.rpt";
          ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
          if (clientDoc == null) {
               // Report can be opened from the relative location specified in the CRConfig.xml, or the report location
               // tag can be removed to open the reports as Java resources or using an absolute path
               // (absolute path not recommended for Web applications).
               clientDoc = new ReportClientDocument();
               // Open report
               clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
               // Store the report document in session
               session.setAttribute(reportName, clientDoc);
               // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
                    // Create the CrystalReportViewer object
                    CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
                    //     set the reportsource property of the viewer
                    IReportSource reportSource = clientDoc.getReportSource();
                    crystalReportPageViewer.setReportSource(reportSource);
                    // set viewer attributes
                    crystalReportPageViewer.setOwnPage(true);
                    crystalReportPageViewer.setOwnForm(true);
                    // Apply the viewer preference attributes
                    // Process the report
                    crystalReportPageViewer.processHttpRequest(request, response, application, null);
               // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
     } catch (ReportSDKExceptionBase e) {
         out.println(e);
%>
Thanks
Arnold

According to the release notes, for the JRCHelperSample to compile, you must set the target runtime for the project.
To do this, either create a project from scratch that uses the Tomcat 5.5 target runtime, or go to the properties menu and ensure that the target runtime is set to the application server you will be using.

Error WHen trying to print a crystal report

I am trying to print a system crystal report and it is giving me the following error: "Error during printing; ensure all parameters are defined". And it prints the first page, but none of the consecutive pages if there are more than 1. Is there some type of setting that needs to be set for printing?

Hmmmmm it says "page range" ALL. I was able to print fine until I created a new layout and saved it. THen I went to print it and got the error. But it seems I get the error when I print any crystal report in any DB. Is this a setting in crystal, SAP, or printer itself? I can print the second page if I toggle through to the second page on the crystal report view, and go to print, and put 2 next to pages feild. Otherwise it is set to print ALL, however it is not doing that.

Get error when passing server name to Crystal Reports in Visual Studio 2012

Hello,
I work on Visual Studio 2012 with Crystal Report 13.0.12 (both developer and run-time). When I pass the name of the server to the Crystal Reports, I get an error -- Failed to open the connection. Database Vendor Code 17. I use SQL OLEDB as the provider. It worked before. Not sure what has happened.
Any help is much appreciated!!!
John

Hi,
See this: Failed to open the connection - database vendor code 17
--dj

Error when startup WPF Application with Crystal Report !

Hi!
I have an error when build & run a WPF Application with Crystal Report. Can anyone help me ?
First, I created 2 project, one is the WPF Application & one is Shell Start Up project (to show loading screen, then show main window when loaded, is WPF Application too)
WPF Application:
/// <summary>
    /// Interaction logic for MainWindow.xaml
    /// </summary>
    public partial class MainWindow : Window {
        public MainWindow() {
            InitializeComponent();
           // crViewer is SAPBusinessObjects.WPF.Viewer.CrystalReportsViewer
            crViewer.ViewerCore.ReportSource = new CrystalReport1(); // Assign report to viewer
Shell Startup:
[STAThread]
        public static void Main(string[] args) {
            AppDomain.CurrentDomain.UnhandledException += new UnhandledExceptionEventHandler(CurrentDomain_UnhandledException);
            Application app = new Application();
            ShowLoadingWindow(); // Show loading screen
            MainWindow mw = new MainWindow();
            mw.Show();
            app.Run();
        static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e) {
            // Exception was throw here
And here is the exception & it's stack trace
Message: Object reference not set to an instance of an object.
Stacktrace:
at SAPBusinessObjects.WPF.Viewer.ViewerCore.<>c__DisplayClass1.<set_ReportSource>b__0()
   at SAPBusinessObjects.WPF.Viewer.DelegateMarshaler.<>c__DisplayClass29.<QueueOnThreadPoolThread>b__28(Object )
   at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback()

As far as I know the error is typically due to the fact that I'm trying to address an object that has not been set. E.g.; this could be due to bad scoping, bad inits/constructs, trying to access a member of a class without instance object and so on. I suspect this is a design \ code issue. You might be able to confirm this using [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx].
Other than that, I'd recommend creating a phone case here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
- Ludek

Error when attempting to run auto invoice report

Hi,
We are currently using Oracle E-Business Suite 11.2. One of our users was attempting to run an Auto Invoice Report this morning and got an error occur. The log file shows the following:
SELECT INTERFACE_LINE_ID
FROM   RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b5
AND    L2.INTERFACE_LINE_CONTEXT = 'UPLS INVOICES'
AND    L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND    L1.LINK_TO_LINE_ATTRIBUTE10 = L2.INTERFACE_LINE_ATTRIBUTE10
AND    L1.LINK_TO_LINE_ATTRIBUTE11 = L2.INTERFACE_LINE_ATTRIBUTE11
AND    L1.LINK_TO_LINE_ATTRIBUTE12 = L2.INTERFACE_LINE_ATTRIBUTE12
WHERE NVL(INTERFACE_STATUS, '~') != 'P'
AND (REQUEST_ID IS NULL OR REQUEST_ID IN (:b6)
AND EXISTS
SELECT 'x'
FROM   RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b7
AND    L2.INTERFACE_LINE_CONTEXT = 'UPLS INVOICES'
AND    L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND    L1.LINK_TO_LINE_ATTRIBUTE10 = L2.INTERFACE_LINE_ATTRIBUTE10
AND    L1.LINK_TO_LINE_ATTRIBUTE11 = L2.INTERFACE_LINE_ATTRIBUTE11
AND    L1.LINK_TO_LINE_ATTRIBUTE12 = L2.INTERFACE_LINE_ATTRIBUTE12
len = 1171
Current system time is 09-OCT-2013 07:33:50
APP-AR-11526: ORA-01427: single-row subquery returns more than one row
UPDATE RA_INTERFACE_LINES L1
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE =
APP-AR-11526: 2913367/ar/src/autoinv/raamil.lpc 1333
UPDATE RA_INTERFACE_LINES L1
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE = sysdate,
LAST_UPDATED_BY = :b2,
LAST_UPDATE_LOGIN = :b3,
CUSTOMER_TRX_ID = NULL,
INTERFACE_LINE_ID = NVL(INTERFACE_LINE_ID,
RA_CUSTOMER_TRX_LINES_S.NEXTVAL),
SET_OF_BOOKS_ID = NVL(SET_OF_BOOKS_ID, :b4),
LINK_TO_LINE_ID =
Would someone be able to help me with this as my knowledge on Oracle is quite basic and the person who usually deals with these queries is out of the office.
Regards,
Jon Ditchfield

The error is
APP-AR-11526: ORA-01427: single-row subquery returns more than one row
A subquery that is supposed to return only one row is returning more than one. Most likely it is this query
SELECT 'x'
FROM   RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b7
AND    L2.INTERFACE_LINE_CONTEXT = 'UPLS INVOICES'
AND    L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND    L1.LINK_TO_LINE_ATTRIBUTE10 = L2.INTERFACE_LINE_ATTRIBUTE10
AND    L1.LINK_TO_LINE_ATTRIBUTE11 = L2.INTERFACE_LINE_ATTRIBUTE11
AND    L1.LINK_TO_LINE_ATTRIBUTE12 = L2.INTERFACE_LINE_ATTRIBUTE12

BI 4.0 Launch Pad will Freeze When Attempting to Schedule a Report

I recently set up BI 4.0 Edge series onto my server running MicroSoft server 2008 R2. The install completed without error so I began implementing 'Best Practice' Crystal Reports. When attempting to schedule these reports within the BI 4.0 launch pad I ran into an issue.
After clicking 'Schedule' the IE browser freezes with the schedule options available to be seen but not interact with and the loading pinwheel frozen in the center of the screen.
I am running IE9 but I have run both IE8 and IE9 on other systems without fail so I don't think that's the issue. I've also tried resizing the APS to allow more RAM to the platform processes as well as split the services into separate servers all without success.
The browser also freezes when I attempt to click the 'Preferences' button on the launch pad home page, but I can open the Web Intelligence Application with no problems.
This is a particularly frustrating issue since I can navigate within the CMC with excellent response time from the system. The rest of the launch pad is as reponsive as the CMC. I can navigate in and out of folders fine, but when I try any command by right-clicking on a report
If anyone has any suggestions on what could be causing the browser to freeze during these transactions I would greatly appreciate it. Iu2019ve tried to run a Repair on the Edge series application and I would like to avoid a complete re-install.

Only IE8 is supported, how about another browser like Firefox on same machine. No need to re-install, you can try to undeploy -> redeploy the web app using WDeploy but it seems to be machine specific.

Error when attempting to IMPORT object "TS_CHECK".

When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
The following short dump occurs:
Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
Except.                CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          19.11.2008 15:14:08
Short text
Error when attempting to IMPORT object "TS_CHECK".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTD4" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing the object "TS_CHECK", the component no. 4 in the
dataset has a different type from the corresponding component
of the target object in the program "SAPLSTD4".
The data type is "I" in the dataset, but "N" in the program.
Missing RAISING Clause in Interface
Program                                 SAPLSTD4
Include                                 LSTD4U03
Row                                     1
Module type                             (FUNCTION)
Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
Trigger Location of Exception
Program                                 SAPLSTD4
Include                                 LSTD4U03
Row                                     51
Module type                             (FUNCTION)
Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
Source Code Extract
Line
SourceCde
21
DATA: BEGIN OF TD110.
22
INCLUDE STRUCTURE TD110_STRU.
23
DATA: END OF TD110.
24
25
CURR_TIME = SY-UZEIT.
26
CURR_DATE = SY-DATUM.
27
28
CALL FUNCTION 'GET_DB_ORA_RELEASE'
29
IMPORTING
30
ORACLE_RELEASE = ORA_REL.
31
32
IF FLAG_REFRESH = 'y'. FLAG_REFRESH = 'Y'. ENDIF.
33
flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
34
35
CLEAR TS_CHECK. REFRESH TS_CHECK.
36
CLEAR CRITOBJ. REFRESH CRITOBJ.
37
CLEAR NR_CRIT_OBJ.
38
39
IF FLAG_REFRESH <> 'Y'.
40
41
Suche zunächst im Arbeitsspeicher !
42
CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
43
IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
44
TS_CHECK[] = TS_CHECK_CACHE[].
45
CRITOBJ[] = CRITOBJ_CACHE[].
46
OK_1 = 'Y'.
47
48
Suche danach in 'MONI' !
49
ELSE.
50
PERFORM PREPARE_MONIKEY USING 2.
>>>>>
IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
52
53
IF SY-SUBRC = 0.
54
OK_1 = 'Y'.
55
TS_CHECK_CACHE[] = TS_CHECK[].
56
CRITOBJ_CACHE[] = CRITOBJ[].
57
ENDIF.
58
ENDIF.
59
60
'Same procedure' für datetime:
61
IF NOT ( TD110_CACHE IS INITIAL ).
62
DATETIME-MONI_DATE = TD110_CACHE-DATUM.
63
DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
64
ELSE.
65
PERFORM PREPARE_MONIKEY USING 3.
66
IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
67
IF SY-SUBRC = 0.
68
DATETIME-MONI_DATE = TD110-DATUM.
69
DATETIME-MONI_TIME = TD110-UZEIT.
70
TD110_CACHE = TD110.
Only related SDN post is following, but solved by changing permissions for saposcol.
Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
Thanks in advance for any assistance.
KR
Gidion

Received the solution from SAP Active Global Support:
This error occurs due a corruption in the table MONI.
For solving this issue you need to clean the records of this table via the following path :
1. Call transaction ST03
2. With GOTO -> Performance database -> Content of database
3. Push button Delete data group
4. Enter ID DB
5. Continue
6. Confirm the delete
If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
Regards,
Gidion

After upgrade SP-Crawl Error: The SharePoint item being crawled returned an error when attempting to download the item.

Hi All - After the upgrade, I am getting SP-Crawl Error for certain links. I check the Crawl component has proper permission.
Google is showing some article like
http://blog.karstein-consulting.com/2012/04/20/error-in-crawl-log-the-sharepoint-item-being-crawled-returned-an-error-when-attempting-to-download-the-item/
not sure if this resolution is referring to 2010 and/or 2013.
I checked the registery editor. I couldn't find 14.0 under the Office Server.
Any clue?
Regards,
Khushi
Khushi

I checked the web application policy the search crawl account has full read permission.
Crawl
Fiddler
Log Error referring the Correlation ID
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Monitoring                    nasq Medium Entering monitored scope (Request (GET:/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Parent No
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Logging Correlation Data      xmnv Medium Name=Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD) e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af71 Medium HTTP Request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af75 Medium Overridden HTTP request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af74 Medium HTTP request URL: /sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
Files                         aise3 Medium Failure when fetching document. 0x80070090 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=20.5461867360237 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=29.917489513332 e8b1679c-0476-70d4-9fcd-2549ba3ee9d4
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    nasq Medium Entering monitored scope (Request (GET:<SiteURL>nsurance%20Benefits%2fLife%20Insurance%2fBasic%20Life%20and%20ADD&FolderCTID=0x01200039DA632EEACF264685CF39D68A18F7C8)).
Parent No
Any clue?
Regards,
Khushi
Khushi

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

Acrobat 11.0.7 electronic signature error, "There was an error when attempting to commit this signature".

Since updating to Acrobat 11.0.7, the electronic signature function has broken. Users receive an error message when trying to insert an electronic signature "There was an error when attempting to commit this signature. The document was not saved. The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder. The document could not be signed. HFT error. This file is already open or in use by another application."
Error occurs even after saving the PDF locally and renaming. This issue is affecting multiple users and has never occurred in previous versions of Acrobat installed. Temporary workaround is to rollback users to Acrobat 11.0.6.

Can you try to manually download and install the update from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5000

[Infoview - BOXI3.1] Error when attempting to schedule a crystal report

Similar Messages

Maybe you are looking for