InfoView is slow

Post Author: Rudy
CA Forum: Administration
I am running infoview on a Windows2000 server using IIS, with a small number of users.
My reports are scheduled to run at night. Users just view an image of the report, They don't actually run the report.
These reports are not huge.
When a user clicks on "view" in infoview, they often have to wait about 20 seconds (or more) before the report is displayed? Sometimes they have a client on the phone waiting for information and there is this long pause.
This there anything I can do to reduce the delay (in infoview or in IIS)
Thanks for any thoughts or ideas.
Rudy

Post Author: vamshikiran
CA Forum: Administration
Check the compatibility & performance issues of the database driver of the connection used.In CMS, For "Report Application Server",for databse, Increase the record fetch size per batch, browse data size, data refresh time.Moreover, place more RAM resources & fast processor.----
Vamshi

Similar Messages

Business Object Infoview very slow on my PC

We are using BO XI3.0 on a Windows server with an oracle database on a unix platform.
We have build severall dashboard for data analysis, each one with "interactive metric trend" and multidimensional queries analysis.
We found Infoview very slow to display the performance data and also to run and get the multidimensional queries data. Keep in mind that the DB is not big (less than 100 K of row)
The users are using windows Internet Explorer version 6 for accessing Infoview.
Are there any requirements on the client site such as required RAM or specific version of Java ?
Is there any tool for analysing the infoview performance ?
Thank you.

Can you try increasing you Client Side java virtual memory by setting up following variable.
JAVA_OPTS = -Xmx512m
Also, Check your server performance, It should have enough space on the drive on which BO is installed, also do check memory, you can shutdown unrequired servers, like Dashboard,PM,Desktop INtelligence, Crystal Reports, if you are not going to use it.
--Kuldeep

Infoview loading slow [DSL-VPN] because network up-link exhausted

Hi everyone
We run XI R2 SP4 at work on a dedicated Win2003 Server with a Gigabit network interface. From the Office LAN (100Mbps) the Infoview portal is loading adequately fast, no delays, no partial screens. When I work from home over a 3Mbit down/384Kbps up DSL Cisco software VPN connection the InfoView portal generally loads terribly slow. I did some investigations in my XP registry and had a look at bandwith usage. It only throws up more questions.
I have the following settings in XP Pro's registry:
TcpWindowSize: 64K
GlobalMaxTcpWindowSize: not implemented
Tcp1323Opts: 1
I played around with those values, but it didn't change much to the following issue:
Upon opening the Infoview portal in IE or requesting a folder's contents the network bandwith used is as follows:
UPLINK: 40-50Kbps pretty much constantly
DOWNLINK: 3-30Kbps with peaks of 70-100Kbps
So my question is, if I want to speed up the portal loading, something's gotta change in the amount of UPLINK it requires to request a simple page. Yes, I made sure NOTHING else was running that requires bandwith, started with a clean 0
Or in other words: why on earth is Infoview demanding MORE UPLINK (384kbps) than downlink (3000kbps)? This makes no sense to me.
Am I overlooking the obvious here?
Thanks all.
Tom C.

Hi,
Make sure your network throughput between the client and the server is below (slower than) the Throughput threshold parameter.
and then follow this article to check your syntax:
Slow-Link with Windows 7 and DFS Namespaces
http://blogs.technet.com/b/askds/archive/2011/12/14/slow-link-with-windows-7-and-dfs-namespaces.aspx
Meanwhile, make sure these files are already offline available and group policy applied.
Hi Karen,
Thanks for the reply! That's the link I used when I first attempted to establish this sceanrio in the first place, and it certainly is useful! I got the Event IDs I was scanning for in that article, as well as the understanding that it takes
at least five minutes in one state before switching to the other (either offline to online or vice versa). However, I'm certain I've rate-limited the network connection to 256 Kb/s, and I see in my registry that the slowlinkparam for my entry has a throughput
value of 512000 (I've changed it from the previous value of 4096000, but either way, they both should exceed 256 Kb/s).
How else can I make sure my throughput is slower than the established threshold? Alternatively, how can I measure the threshold to see whether or not it's below the value we established for testing purposes?

[BOXI 3.0] - Desktop Promts in infoview very slow

Hello,
We have desktop intelligence report with prompts (10) and when we refresh report we wait about 4 minutes just to select values in prompts.
In universe we deselected "Avtomatic refresh before use"....
Any suggestions ?
SW:
Windows server 2003 sp2 - english
BOE premium ( BO XI R 3.0)
CMS database => Oracle 10gR2
Database => Oracle 10gR2
Thank you for reply!
Regards,
Gregor
Edited by: Gregor Majdi269; on Dec 17, 2008 9:54 AM

Hi Gregor,
You could look at the source SQL for the List Of Values int he universes. Check how long these pieces of SQL take to run, and if there is any way that they can be optimised.
To do this go to your universe, look at the object being used to build the prompt and edit it. On the proprties tab it will have an optyion to edit list of values.
One thing that I have found is that you can use lookup tables for the LOV values. For instance, if I had a customer table containing 100,000 rows and I wanted a prompt on city (50 distinct values) then by default the LOV is built from a select distinct on the 100,000 rows. If I have a lookup table with 50 rows in it and build my LOV from that it will be quicker
Hope this helps
Alan

Performance: How to manage large reports with high data volume

Hi everybody,
we actually make some tests on our BO server system, to define limitations and oppertunities. Among other things we constructed a large report with a high data volume (about 250.000 data records).
When executing the query in SAP Query Designer it takes about 10 minutes to display it. In Crystal Reports we rebult the row and column structure of the query. The data retrieval in Crystal Reports Designer last about 9 minutes - even faster as in the query.
Unfortunately in BO InfoView the report is not displayed. After 30 minutes of loading time we get a timeout error RCIRAS0244.
com.crystaldecisions.sdk.occa.managedreports.ras.internal.ManagedRASException:
Cannot open report document. ---
The request timed out because there has been no reply from the server for 600.000 milliseconds.
Also a refresh of an report with saved data is not possible.
Now we are asking us some questions:
1. Where can we set the timeout for InfoView to a value larger than 30 minutes?
2. Why is InfoView so slow compared to Crystal Designer? Where is the bottleneck?
3. Whats the impact of SAP single sign-on compared to Enterprise logon on the performance?
Thanks for any helps and comments!
Sebastian

Hi Ingo,
thank you for your reply.
I will check the servers and maybe change the time limits.
Unfortunately we have a quite slow server system that probably cause this timeout. In CR Designer we have no problems, its really quick. Is it to expect that CR Designer and InfoView have almost the same performance?
Another nice point: When we execute the query in SAP BEx Query Designer it takes about 10 minutes to open it, in Crystal Designer it needs just about 5-6 minutes. We integrated exactly the same fields in the report, which exist in die SAP BEx query.
What may cause the difference?
- Exceptions and conditions in the query?
- Free characteristics in the query?
- anything else?
Best regards,
Sebastian

Login to Infoview / cmc is slow

Hi all!!
I'm using a BOE XI 3.1 SP2 with Apache Tomcat Was, in a Windows 2008 VMware image...
Login times to InfoView and CmcApp with entreprise authentification are about 2 minutes or more than sometimes.
And after login,some page take time ,for example adding a new user ..
When we restart Tomcat 5.5 the login is fast but after few minutes the issue back.
Has anyone experienced this problem ?

Hi Thibault,
I haven't seen delays quite that long, but I have seen this take quite a bit longer the first time you access the sections or applications. Usually, this delay is in extracting the contents of the WAR files into the WebApps folder and/or compiling the JSPs for consumption. In your case though, if it is quick and then slows down after some use, I would look at resources on the box. Ensure that you have set the -Xmx and -Xms switching on the Tomcat server to 1024 to allow for up to 1gb of RAM, also, enable a debug trace and see if you can locate, from the logs, what the delay is.
Other than that, can you give us a little more detail on the environment? It might be worth it to open up a support message and have an engineer look into this with you.
Thanks
Jonathan

Crystal report is slow in infoview

Hi,
In Internet Explorer ,While browsing the published reports from crystal server the report takes long time to display in the IE.I can able to see all the published roles as folders but when I click on a particular folder the report is taking too long time to display in infoview.What may be the reason ? Please help me out.
Thanks.

Please post your query to the [Business Objects Enterprise Administration|BI Platform; forum

Slow logging into Infoview

Hi All,
We are using BOE XI3.1 and using LDAP and configured Trusted authentication with .NET. We have 4 Web Servers (IIS) and 2 clustered SIA.
When logging into Infoview it is taking 7 - 10 seconds.
We would like to know what is the BO XI3.1 product bench Mark.
Thanks in advance.

trusted authentication is external to BO, it's just the passing of a username, do you experience the problem if logging in with LDAP directly? If not then you will have to figure out how to trace external to BO (fiddler and packet scanning are the most useful tools in this case).
Regards,
Tim

Crystal report with prompts takes very long time to open in infoview BOXI3.

Crystal report with prompts takes very long time to open in infoview BOXI3.1?
Is there any way to increase the performance.

Ramsudhakar,
There are several items that could cause these slow down problems. Without knowing more about the way your environment is setup, I could cause more problems, by giving out performance tips. You would need to be more specific in your post.
What we know. BOXI3.1
What we don't know.
O/S
App. Server
Hardware Spec's
ETC.
I see that this post has been out here for some time. So if this is still a problem for you I'll try and help, if you provide more information.
Thanks
Bill

Slow reports giving "An error has occurred: Request timed out" on first run

I have BO XI R1 SP4 installed on Windows 2003 R2 SP3 with .Net 1.1 installed.
Most of our reports are quite large (>60000 rows returned) and will timeout in InfoView when first run and give the message in the subject. When you close the window and re-run them then they come up almost straight away.
This tells me that the report runs and it gets stored in the cache server, which is fine, but I want to be able to eliminate the timeout for the users.
I found a solution if .Net 2.0 is installed (HOW TO: Resolve 'An error has occurred: Request timed out' issue) but my server only has .Net 1.1.
Is there a change to a timeout I can made to the server as it is, or should I install .Net 2.0 and change IIS to use that version of .Net then make the solution change already suggested?
TIA
I should add that the timeout is after around 5 minutes, so the normal changes recommended at note 1198539 doesn't seem to apply, as the timeout happens after the normal 90 seconds expires for some time.
Edited by: Geoff Croxson on Sep 3, 2009 2:02 PM

Will something like this work on an iPhone and where would I locate it? My App Store was working just fine and this last week it's been slower and slower, plus difficulties with downloading and updates. Both my downloads and updates start and then pop up a 'can't install at this time'. I thought it might b my storage space so I started deleting. Well I have plenty of space now and still get same problem.
Now over the last two days I will type in a search to reinstall the apps that I removed and the App Store tells me request timed out.
Help please

Report instance view runs slow

I am just starting to migrate Crystal reports into BOE XI R3, using the CMC to add the reports from the file system. With each new report, I create a recurring schedule and a run-now instance.
The first four reports performed well. The fifth seemed to hang the browser when viewed. I eventually found the process (View Latest Instance or view from History) would complete in about 15 minutes. At about 12 minutes, IE generates a message:
A script on this page is causing Internet Explorer to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?
The CMC/browser status line shows it is trying to open crystalreportviewers / htmlbridge.jsp.
The instance takes about 1 minute to run in the CMC. The report uses about 60,000 records and produces about 4,500 pages.
In Crystal Enterprise 9, our current platform, the same instance is viewable in 2-3 seconds.
The first four reports migrated to XI3 run in less than a minute and are viewable in 5-6 seconds, have from 120 to 6,400 pages, and use the same dataset.
Not seeing any significant differences between the quicker and slower reports, I'm at a loss as to where BOE is failing. I'd appreciate some thoughts. Thanks!

Hello,
If your looking for way to improve performance for the infoview please review 1292411 - How to Improve the performance of Infoview in XI R3. Below is the resolution from that SAP note. I hope this resolves your issue.
Enable browser caching
Backup the exising web.xml <deploymant folder>\InfoViewApp\WEB-INF\web.xml (where deployment folder is the location the applications that have been deployed in your environment)
Open the web.xml file and search for the text :
<init-param>
<param-name>nocache</param-name>
<param-value>true</param-value>
</init-param>
modify the line <param-value>true</param-value> to <param-value>false</param-value>
save the file
restart your web application server
If you are using Secure Sockets Layer on Tomcat Application server then follow these instructions
Backup the exising context.xml <path to>\tomcat\conf\context.xml (where path to is the location where tomcat is installed)
Open the context.xml file and add the text:
<Value className="org.apache.catalina.authenticator.FormAuthenticator" disableProxyCaching="false" />
save the file
restart Tomcat

Kt6v posts very slow with usb hub

Well I have been tinkering with this computer.
its kt6v mobo and i just updated the bios using live update.
I remembered i had a usb hub that i used to use on my old computer.
its an internal/external hub.
but the problem is when the hub is plugged in the computer posts very very slowly..
even when i get into the bios config its slow(you press a button and you have to wait 10secs for response).
with the hub unpluged its fine.
its a powered usb hub(usb2.0) it was pluged into the back of the computer.
computer specs
2400 athlonXP(Infoview shows it as a 2800 semperon)
256mb ram ddr333(for some reason the 512 chip went missing)
GeForce FX 5200
PSU(unsure)
linksys wireless-G(disabled)
does anyone know what might be causing this??
would tweaking the bios settings fix it? if yes how?

The only way to know for certain is to take the heatsink and fan assembly off of the cpu and check the first three digits in its OPN number. AXD is an Athlon XP while SDA is a Sempron. You can find the full info on this link. Before you attempt this make certain that the ac cord is disconnected.
http://www.thedigerati.us/info/amdcpuchart.html#xp
If you do this, you will need to clean off the old thermal grease or pad from the heatsink and cpu and apply a thin coating of new thermal grease on the center die of the cpu. Also make certain that the step of the heatsink is located above the wide portion of the cpu socket when it is reassembled.

Application running slow in ver 1.5, 1.6 but not in 1.4

We have a application that was running very slow when we used any version sun java instead of MS java in IE6 SP2.
I removed MS Java from IE and installed Sun java 1.4.2_16 and the applications starts in under 10sec's.
But we had to test the other version of java as well, i then installed the other versions from 1.5 update 14 to 1.6 update 4 and the application takes about 30 to 40 sec to load the web page.
I then looked at the development version of java 1.6 update 10 and version 7. In 1.6 update 10 the application would load but would not refresh the applets it would just hang. In version 7 the application would not start up at all.
In all the versions i increased the memory parmeters from 128 to 256 and in version 1.6 i changed it to -Xmx300m as well but still the application was slow loading. Removed all the versions and reinstalled 1.4.2_14 and the application works fine and loads up under 10 sec.
Does any one have any idea why this is happening.
IE 6 sp2
XP sp2 been used.

You should try profiling the startup code.
As a first go around, you might try getting a stack trace during the startup process and look for locks (see jstack).
If your application is built on Swing, it's my understanding that the later versions of Java are more strict about use of the Event Dispatch Thread--pay particular attention to activity off the EDT locking the thread.

Mid 2011 Macbook Air Painfully slow.

Mid 2011 Macbook Air Painfully slow.
Hey everyone. I am writing about my 13 inch Mid 2011 Macbook Air.
Recently it has been extremely slow and on occasion has not started up.
I have reset the PRAM and SMC already, yet it is still very slow. I have a couple theories about what might have caused it, are they plausible?
Theory 1: It’s a software problem. I tried to upgrade to 10.8.2 but halfway through the upgrade the computer restarted and somehow I was still on 10.8.1. For fear of a big issue happening I didn’t try to upgrade again. Perhaps it is a flaw in Apple’s software update?
The important thing to note about this update is that I tried to install 10.8.2 around a month or two weeks BEFORE I started having problems. So if these issues were due to 10.8.2’s failed update then it certainly was a delayed reaction.
I would of course like to update to 10.8.2 BUT as my computer is acting EXTREMELY slow and having trouble turning on occasionally I am worried the software update will completely brick the machine. Is that possible? Should I actually finish through with the software update?
Theory 2: It was an electricity problem.
The computer died when I was sitting at a café plugged into their wall sockets. A few days later when I came back to the same spot with my old macbook which is now being used in lieu of the Air it suddenly turned black for a little while. Sensing it might be an electricity surge or something with their system I unplugged the cable. I am not sure if that was paranoia though.
Can an electricity surge or a bad outlet fry a computer? Can it fry the ram so the computer is extremely slow? Does that theory hold any water?
Thanks for your help diagnosing this problem.
All the best.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Internet Connection Became Slow after Introduction of Cisco ASA 5505 to the Network

I configured a Cisco ASA 5505 (Version Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
in transparent firewall mode and inserted after Cisco 1700 router. However, the internet connection became very slow and users are compaining that they cannot load any pages.
My setup looks like:
Internet --> Cisco 1700 --> Cisco ASA 5505 --> LAN
The license information is:
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs                       : 3, DMZ Restricted
Inside Hosts                : Unlimited
Failover                    : Disabled
VPN-DES                     : Enabled
VPN-3DES-AES                : Enabled
VPN Peers                   : 10
WebVPN Peers                : 2
Dual ISPs                   : Disabled
VLAN Trunk Ports            : 0
This platform has a Base license.
The flash activation key is the SAME as the running key.
My running-config looks like:
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Vlan1
nameif inside
security-level 100
no shut
interface Vlan2
nameif outside
security-level 0
no shut
interface Ethernet0/0
switchport access vlan 2
no shut
interface Ethernet0/1
no shut
interface Ethernet0/2
no shut
interface Ethernet0/3
no shut
interface Ethernet0/4
no shut
interface Ethernet0/5
no shut
interface Ethernet0/6
no shut
interface Ethernet0/7
no shut
passwd 2KFQnbNIdI.2KYOU encrypted
regex urllist1 ".*\.([Ee][Xx][Ee]|[Cc][Oo][Mm]|[Bb][Aa][Tt]) HTTP/1.[01]"
regex urllist2 ".*\.([Pp][Ii][Ff]|[Vv][Bb][Ss]|[Ww][Ss][Hh]) HTTP/1.[01]"
regex urllist3 ".*\.([Dd][Oo][Cc]|[Xx][Ll][Ss]|[Pp][Pp][Tt]) HTTP/1.[01]"
regex urllist4 ".*\.([Zz][Ii][Pp]|[Tt][Aa][Rr]|[Tt][Gg][Zz]) HTTP/1.[01]"
regex domainlist1 "\.facebook\.com"
regex domainlist2 "\.diretube\.com"
regex domainlist3 "\.youtube\.com"
regex domainlist4 "\.vimeo\.com"
regex applicationheader "application/.*"
regex contenttype "Content-Type"
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list outside_in extended permit ip any any
access-list inside_mpc extended permit tcp any any eq www
access-list inside_mpc extended permit tcp any any eq 8080
pager lines 24
mtu outside 1500
mtu inside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domainlist1
match regex domainlist2
match regex domainlist3
match regex domainlist4
class-map type inspect http match-all BlockDomainsClass
match request header host regex class DomainBlockList
class-map type regex match-any URLBlockList
match regex urllist1
match regex urllist2
match regex urllist3
match regex urllist4
class-map inspection_default
match default-inspection-traffic
class-map type inspect http match-all AppHeaderClass
match response header regex contenttype regex applicationheader
class-map httptraffic
match access-list inside_mpc
class-map type inspect http match-all BlockURLsClass
match request uri regex class URLBlockList
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map type inspect http http_inspection_policy
parameters
protocol-violation action drop-connection
class AppHeaderClass
drop-connection log
match request method connect
drop-connection log
class BlockDomainsClass
reset log
class BlockURLsClass
reset log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
policy-map inside-policy
class httptraffic
inspect http http_inspection_policy
service-policy global_policy global
service-policy inside-policy interface inside
prompt hostname context
Cryptochecksum:8ab1a53df6ae3c202aee236d6080edfd
: end
Could the slow internet connection be due to license limitations? Or is there something wrong with my configuration?
Please see the configuration and help.
Thanks

I have re-configured the ASA 5505 yesterday and so far it's working fine. I am not sure if the problem will re-appear later on. Anyways here is my sh tech-support
ciscoasa# sh tech-support
Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
Compiled on Wed 15-Aug-07 16:08 by builders
System image file is "disk0:/asa723-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 14 hours 16 mins
Hardware:   ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode   : CNlite-MC-Boot-Cisco-1.2
                             SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Int: Internal-Data0/0    : address is 001f.9ee8.ffa2, irq 11
1: Ext: Ethernet0/0         : address is 001f.9ee8.ff9a, irq 255
2: Ext: Ethernet0/1         : address is 001f.9ee8.ff9b, irq 255
3: Ext: Ethernet0/2         : address is 001f.9ee8.ff9c, irq 255
4: Ext: Ethernet0/3         : address is 001f.9ee8.ff9d, irq 255
5: Ext: Ethernet0/4         : address is 001f.9ee8.ff9e, irq 255
6: Ext: Ethernet0/5         : address is 001f.9ee8.ff9f, irq 255
<--- More --->
7: Ext: Ethernet0/6         : address is 001f.9ee8.ffa0, irq 255
8: Ext: Ethernet0/7         : address is 001f.9ee8.ffa1, irq 255
9: Int: Internal-Data0/1    : address is 0000.0003.0002, irq 255
10: Int: Not used            : irq 255
11: Int: Not used            : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs                       : 3, DMZ Restricted
Inside Hosts                : Unlimited
Failover                    : Disabled
VPN-DES                     : Enabled
VPN-3DES-AES                : Enabled
VPN Peers                   : 10
WebVPN Peers                : 2
Dual ISPs                   : Disabled
VLAN Trunk Ports            : 0
This platform has a Base license.
Serial Number: JMX1211Z2N4
Running Activation Key: 0xaf0ed046 0xbcf18ebf 0x80b38508 0xba785cc0 0x05250493
Configuration register is 0x1
Configuration has not been modified since last system restart.
<--- More --->
------------------ show clock ------------------
18:32:58.254 UTC Tue Nov 26 2013
------------------ show memory ------------------
Free memory:       199837144 bytes (74%)
Used memory:        68598312 bytes (26%)
Total memory:      268435456 bytes (100%)
------------------ show conn count ------------------
1041 in use, 2469 most used
------------------ show xlate count ------------------
0 in use, 0 most used
------------------ show blocks ------------------
SIZE    MAX    LOW    CNT
     0    100     68    100
<--- More --->
     4    300    299    299
    80    100     92    100
   256    100     94    100
1550   6174   6166   6174
2048   1124    551    612
------------------ show blocks queue history detail ------------------
History buffer memory usage: 2136 bytes (default)
------------------ show interface ------------------
Interface Internal-Data0/0 "", is up, line protocol is up
Hardware is y88acs06, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 001f.9ee8.ffa2, MTU not set
IP address unassigned
18491855 packets input, 11769262614 bytes, 0 no buffer
Received 213772 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops, 0 demux drops
18185861 packets output, 11626494317 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
<--- More --->
0 input reset drops, 0 output reset drops
input queue (curr/max packets): hardware (0/0) software (0/0)
output queue (curr/max packets): hardware (0/55) software (0/0)
Control Point Interface States:
Interface number is unassigned
Interface Internal-Data0/1 "", is administratively down, line protocol is up
Hardware is 88E6095, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 0000.0003.0002, MTU not set
IP address unassigned
18184216 packets input, 11625360131 bytes, 0 no buffer
Received 206655 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 switch ingress policy drops
18490057 packets output, 11768078777 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Loopback0 "_internal_loopback", is up, line protocol is up
Hardware is VirtualMAC address 0000.0000.0000, MTU 1500
IP address 127.1.0.1, subnet mask 255.255.0.0
<--- More --->
Traffic Statistics for "_internal_loopback":
1 packets input, 28 bytes
1 packets output, 28 bytes
1 packets dropped
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Control Point Interface States:
Interface number is 28
Interface config status is active
Interface state is active
Interface Vlan1 "inside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa2, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "inside":
7742275 packets input, 903584114 bytes
10645034 packets output, 10347291114 bytes
184883 packets dropped
      1 minute input rate 320 pkts/sec, 35404 bytes/sec
      1 minute output rate 325 pkts/sec, 313317 bytes/sec
<--- More --->
      1 minute drop rate, 17 pkts/sec
      5 minute input rate 399 pkts/sec, 59676 bytes/sec
      5 minute output rate 483 pkts/sec, 503200 bytes/sec
      5 minute drop rate, 9 pkts/sec
Control Point Interface States:
Interface number is 1
Interface config status is active
Interface state is active
Interface Vlan2 "outside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa3, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "outside":
10750090 packets input, 10432619059 bytes
7541331 packets output, 870613684 bytes
109911 packets dropped
      1 minute input rate 328 pkts/sec, 313770 bytes/sec
      1 minute output rate 301 pkts/sec, 32459 bytes/sec
      1 minute drop rate, 2 pkts/sec
      5 minute input rate 485 pkts/sec, 503789 bytes/sec
      5 minute output rate 387 pkts/sec, 57681 bytes/sec
      5 minute drop rate, 2 pkts/sec
Control Point Interface States:
Interface number is 2
<--- More --->
Interface config status is active
Interface state is active
Interface Ethernet0/0 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Available but not configured via nameif
MAC address 001f.9ee8.ff9a, MTU not set
IP address unassigned
10749794 packets input, 10630700889 bytes, 0 no buffer
Received 2506 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
3 switch ingress policy drops
7541070 packets output, 1028190148 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/1 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
<--- More --->
Available but not configured via nameif
MAC address 001f.9ee8.ff9b, MTU not set
IP address unassigned
7741977 packets input, 1064586806 bytes, 0 no buffer
Received 211282 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
10644663 packets output, 10543362751 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/2 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9c, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
<--- More --->
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/3 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9d, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
<--- More --->
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/4 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9e, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
<--- More --->
Interface number is unassigned
Interface Ethernet0/5 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9f, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/6 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
<--- More --->
MAC address 001f.9ee8.ffa0, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/7 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ffa1, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
<--- More --->
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
------------------ show cpu usage ------------------
CPU utilization for 5 seconds = 12%; 1 minute: 11%; 5 minutes: 11%
------------------ show cpu hogging process ------------------
Process:      Dispatch Unit, NUMHOG: 1, MAXHOG: 133, LASTHOG: 140
LASTHOG At:   04:45:59 UTC Nov 26 2013
PC:           8be0f7
Traceback:    8bed19 8bf553 302b87 3030a5 2fad69 7674bf 75ca16
              c6251d c62a4c c62f6c 75c653 767820 797f64 769c85
<--- More --->
------------------ show process ------------------
    PC       SP       STATE       Runtime    SBASE     Stack Process
Mwe 00c9bb24 01bb8700 013e3250          0 01733fc8 15616/16384 emweb/cifs
Lwe 001072ac 0176f9c4 013e32d0          0 0176d9f0 8132/8192 block_diag
Mrd 00223a67 01783d5c 013e33b0     314854 0177be18 25752/32768 Dispatch Unit
Msi 00f82847 01b07b84 013e3250        229 01b05bc0 7984/8192 y88acs06 OneSec Thread
Mwe 0011b1a5 01b09cfc 013e3250          0 01b07d88 7864/8192 Reload Control Thread
Mwe 00120606 01b1260c 013e5258          0 01b10988 7256/8192 aaa
Mwe 001486aa 01b19404 013e5ae8          0 01b15450 16020/16384 CMGR Server Process
Mwe 0014c3c5 01b1b4d4 013e3250          0 01b19570 7968/8192 CMGR Timer Process
Lwe 002227a1 01b239b4 013ee360          0 01b219f0 7524/8192 dbgtrace
Mwe 004e1ba5 01b29c34 013e3250        157 01b27d50 6436/8192 eswilp_svi_init
Mwe 01064b1d 01b4a7f4 013e3250          0 01b48890 7848/8192 Chunk Manager
Msi 008b61b6 01b52d54 013e3250        230 01b50da0 7856/8192 PIX Garbage Collector
Lsi 00ecb6ac 01b54e94 013e3250         12 01b52ec0 7552/8192 route_process
Mwe 008a5ddc 01b5dc04 0133b430          0 01b5bc40 8116/8192 IP Address Assign
Mwe 00acb779 01b60604 01346e10          0 01b5e640 8116/8192 QoS Support Module
Mwe 0091eba9 01b6275c 0133c530          0 01b60798 8116/8192 Client Update Task
Lwe 01083c8e 01b656d4 013e3250     123088 01b63770 7840/8192 Checkheaps
Mwe 00acfd7d 01b6b824 013e3250        623 01b69ad0 3476/8192 Quack process
Mwe 00b2a260 01b6dad4 013e3250         22 01b6bbf0 7364/8192 Session Manager
Mwe 00c55efd 01b78564 031d0478          4 01b74a50 14768/16384 uauth
<--- More --->
Mwe 00be3c9e 01b7aaec 0135c010          0 01b78b28 7524/8192 Uauth_Proxy
Mwe 00c52759 01b80e0c 01361770          0 01b7ee88 7712/8192 SMTP
Mwe 00c3f7b9 01b82eec 01361710          0 01b80fa8 7412/8192 Logger
Mwe 00c3fd26 01b8502c 013e3250          0 01b830c8 7492/8192 Thread Logger
Mwe 00f62272 01b9596c 013ac520          0 01b939c8 7188/8192 vpnlb_thread
Msi 00b4097c 01c598c4 013e3250        190 01c578f0 8000/8192 emweb/cifs_timer
Msi 005bd338 017a909c 013e3250      25855 017a7108 7412/8192 arp_timer
Mwe 005c76bc 01b486e4 013fba50      20643 01b46770 7348/8192 arp_forward_thread
Mwe 00c5a919 023fa5fc 013619e0          0 023f8648 7968/8192 tcp_fast
Mwe 00c5a6e5 023fc624 013619e0          0 023fa670 7968/8192 tcp_slow
Mwe 00c754d1 0240d42c 013628a0          0 0240b478 8100/8192 udp_timer
Mwe 0019cb17 01b404a4 013e3250          0 01b3e530 7984/8192 CTCP Timer process
Mwe 00efe8b3 0308c15c 013e3250          0 0308a208 7952/8192 L2TP data daemon
Mwe 00efef23 0308e194 013e3250          0 0308c230 7968/8192 L2TP mgmt daemon
Mwe 00eea02b 030c62ac 013a5c10         43 030c2338 16244/16384 ppp_timer_thread
Msi 00f62d57 030c82f4 013e3250        264 030c6360 7924/8192 vpnlb_timer_thread
Mwe 001b96e6 01b7cbbc 01b1e9c8          1 01b7ac48 7728/8192 IPsec message handler
Msi 001c9bac 01b8d4dc 013e3250       2917 01b8b548 7648/8192 CTM message handler
Mwe 00af93b8 031465b4 013e3250          0 03144640 7984/8192 ICMP event handler
Mwe 00831003 0314a724 013e3250        387 031467b0 16100/16384 IP Background
Mwe 0021b267 031a83c4 013123c0         31 03188450 123488/131072 tmatch compile thread
Mwe 009f2405 03290044 013e3250          0 0328c0c0 16072/16384 Crypto PKI RECV
Mwe 009f305a 03294144 013e3250          0 032901e0 16040/16384 Crypto CA
Mwe 0064d4fd 01b3e24c 013e3250          8 01b3c2f8 7508/8192 ESW_MRVL switch interrupt service
<--- More --->
Msi 00646f5c 032c134c 013e3250    3059378 032bf448 7184/8192 esw_stats
Lsi 008cbb80 032dc704 013e3250          3 032da730 7908/8192 uauth_urlb clean
Lwe 008afee7 034a0914 013e3250        197 0349e9b0 6636/8192 pm_timer_thread
Mwe 0052f0bf 034a35ac 013e3250          0 034a1648 7968/8192 IKE Timekeeper
Mwe 00520f6b 034a8adc 0132e2b0          0 034a4e38 15448/16384 IKE Daemon
Mwe 00bf5c78 034ac7ac 01360680          0 034aa7f8 8100/8192 RADIUS Proxy Event Daemon
Mwe 00bc32de 034ae79c 034dcbe0          0 034ac918 7208/8192 RADIUS Proxy Listener
Mwe 00bf5e0f 034b099c 013e3250          0 034aea38 7968/8192 RADIUS Proxy Time Keeper
Mwe 005aac4c 034b3154 013fb980          0 034b1250 7492/8192 Integrity FW Task
M* 008550a5 0009fefc 013e33b0       3183 034e3b20 24896/32768 ci/console
Msi 008eb694 034ed9d4 013e3250       2370 034ebc40 6176/8192 update_cpu_usage
Msi 008e6415 034f7dac 013e3250       1096 034f5eb8 6124/8192 NIC status poll
Mwe 005b63e6 03517d1c 013fbd10       1963 03515d78 7636/8192 IP Thread
Mwe 005becbe 03519e4c 013fbcb0          3 03517e98 7384/8192 ARP Thread
Mwe 004c2b36 0351befc 013fbae0          0 03519fe8 7864/8192 icmp_thread
Mwe 00c7722e 0351e06c 013e3250          0 0351c108 7848/8192 udp_thread
Mwe 00c5d126 0352008c 013fbd00          0 0351e228 7688/8192 tcp_thread
Mwe 00bc32de 03a6982c 03a5ee18          0 03a679b8 7512/8192 EAPoUDP-sock
Mwe 00266c15 03a6b614 013e3250          0 03a699e0 7032/8192 EAPoUDP
Mwe 005a6728 01b27b94 013e3250          0 01b25c30 7968/8192 Integrity Fw Timer Thread
-     -        -         -      47686621    -         -     scheduler
-     -        -         -      51253819    -         -     total elapsed
------------------ show failover ------------------
<--- More --->
ERROR: Command requires failover license
------------------ show traffic ------------------
inside:
received (in 51429.740 secs):
7749585 packets905087345 bytes
67 pkts/sec17013 bytes/sec
transmitted (in 51429.740 secs):
10653162 packets10355908020 bytes
40 pkts/sec201026 bytes/sec
      1 minute input rate 412 pkts/sec, 51803 bytes/sec
      1 minute output rate 475 pkts/sec, 522952 bytes/sec
      1 minute drop rate, 24 pkts/sec
      5 minute input rate 399 pkts/sec, 59676 bytes/sec
      5 minute output rate 483 pkts/sec, 503200 bytes/sec
      5 minute drop rate, 9 pkts/sec
outside:
received (in 51430.240 secs):
10758403 packets10441440193 bytes
42 pkts/sec203021 bytes/sec
transmitted (in 51430.240 secs):
7548339 packets872053854 bytes
<--- More --->
63 pkts/sec16037 bytes/sec
      1 minute input rate 479 pkts/sec, 523680 bytes/sec
      1 minute output rate 387 pkts/sec, 46796 bytes/sec
      1 minute drop rate, 3 pkts/sec
      5 minute input rate 485 pkts/sec, 503789 bytes/sec
      5 minute output rate 387 pkts/sec, 57681 bytes/sec
      5 minute drop rate, 2 pkts/sec
_internal_loopback:
received (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Aggregated Traffic on Physical Interface
<--- More --->
Ethernet0/0:
received (in 51431.740 secs):
10758462 packets10640075825 bytes
42 pkts/sec206042 bytes/sec
transmitted (in 51431.740 secs):
7548383 packets1029818127 bytes
63 pkts/sec20023 bytes/sec
      1 minute input rate 485 pkts/sec, 537048 bytes/sec
      1 minute output rate 395 pkts/sec, 54546 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 485 pkts/sec, 511723 bytes/sec
      5 minute output rate 387 pkts/sec, 65495 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/1:
received (in 51433.570 secs):
7749780 packets1066328930 bytes
67 pkts/sec20064 bytes/sec
transmitted (in 51433.570 secs):
10653359 packets10552787020 bytes
40 pkts/sec205006 bytes/sec
      1 minute input rate 419 pkts/sec, 59621 bytes/sec
      1 minute output rate 480 pkts/sec, 533950 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 399 pkts/sec, 67618 bytes/sec
<--- More --->
      5 minute output rate 482 pkts/sec, 511073 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/2:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/3:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
<--- More --->
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/4:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/5:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
<--- More --->
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/6:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/7:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
<--- More --->
0 packets0 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Internal-Data0/0:
received (in 51435.510 secs):
18513901 packets11784250044 bytes
25 pkts/sec229023 bytes/sec
transmitted (in 51435.510 secs):
18207269 packets11641332179 bytes
19 pkts/sec226078 bytes/sec
      1 minute input rate 891 pkts/sec, 595715 bytes/sec
      1 minute output rate 863 pkts/sec, 588935 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 885 pkts/sec, 584035 bytes/sec
      5 minute output rate 870 pkts/sec, 580393 bytes/sec
      5 minute drop rate, 0 pkts/sec
Internal-Data0/1:
received (in 51436.010 secs):
18207323 packets11641364184 bytes
<--- More --->
19 pkts/sec226076 bytes/sec
transmitted (in 51436.010 secs):
18513954 packets11784281987 bytes
25 pkts/sec229022 bytes/sec
      1 minute input rate 855 pkts/sec, 575808 bytes/sec
      1 minute output rate 884 pkts/sec, 582339 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 869 pkts/sec, 578350 bytes/sec
      5 minute output rate 883 pkts/sec, 581924 bytes/sec
      5 minute drop rate, 0 pkts/sec
------------------ show perfmon ------------------
PERFMON STATS:    Current      Average
Xlates               0/s          0/s
Connections         17/s          6/s
TCP Conns            8/s          2/s
UDP Conns            7/s          2/s
URL Access           0/s          0/s
URL Server Req       0/s          0/s
TCP Fixup            0/s          0/s
TCP Intercept        0/s          0/s
HTTP Fixup           0/s          0/s
<--- More --->
FTP Fixup            0/s          0/s
AAA Authen           0/s          0/s
AAA Author           0/s          0/s
AAA Account          0/s          0/s
------------------ show counters ------------------
Protocol     Counter                     Value   Context
IP           IN_PKTS                  168960   Summary
IP           OUT_PKTS                 169304   Summary
IP           TO_ARP                       61   Summary
------------------ show history ------------------
------------------ show firewall ------------------
Firewall mode: Transparent
------------------ show running-config ------------------
<--- More --->
: Saved
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
enable password
names
interface Vlan1
nameif inside
security-level 100
interface Vlan2
nameif outside
security-level 0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
<--- More --->
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd
regex domain1 ".facebook\.com"
regex domain2 ".fb\.com"
regex domain3 ".youtube\.com"
ftp mode passive
access-list ACL_IN extended permit ip any any
pager lines 24
mtu inside 1500
mtu outside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
<--- More --->
arp timeout 14400
access-group ACL_IN in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domain1
match regex domain2
match regex domain3
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
<--- More --->
message-length maximum 512
match domain-name regex class DomainBlockList
drop-connection log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:bb5115ea1d14ee42e7961ef0c9aaed86
: end
<--- More --->
------------------ show startup-config errors ------------------
INFO: No configuration errors
------------------ console logs ------------------
Message #1 : Message #2 : Message #3 : Message #4 : Message #5 : Message #6 : Message #7 : Message #8 : Message #9 : Message #10 : Message #11 : Message #12 : Message #13 : Message #14 :
Total SSMs found: 0
Message #15 :
Total NICs found: 10
Message #16 : 88E6095 rev 2 Gigabit Ethernet @ index 09Message #17 : MAC: 0000.0003.0002
Message #18 : 88E6095 rev 2 Ethernet @ index 08Message #19 : MAC: 001f.9ee8.ffa1
Message #20 : 88E6095 rev 2 Ethernet @ index 07Message #21 : MAC: 001f.9ee8.ffa0
Message #22 : 88E6095 rev 2 Ethernet @ index 06Message #23 : MAC: 001f.9ee8.ff9f
Message #24 : 88E6095 rev 2 Ethernet @ index 05Message #25 : MAC: 001f.9ee8.ff9e
Message #26 : 88E6095 rev 2 Ethernet @ index 04Message #27 : MAC: 001f.9ee8.ff9d
Message #28 : 88E6095 rev 2 Ethernet @ index 03Message #29 : MAC: 001f.9ee8.ff9c
Message #30 : 88E6095 rev 2 Ethernet @ index 02Message #31 : MAC: 001f.9ee8.ff9b
Message #32 : 88E6095 rev 2 Ethernet @ index 01Message #33 : MAC: 001f.9ee8.ff9a
Message #34 : y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 001f.9ee8.ffa2
Message #35 :
Licensed features for this platform:
Message #36 : Maximum Physical Interfaces : 8
<--- More --->
Message #37 : VLANs                       : 3, DMZ Restricted
Message #38 : Inside Hosts                : Unlimited
Message #39 : Failover                    : Disabled
Message #40 : VPN-DES                     : Enabled
Message #41 : VPN-3DES-AES                : Enabled
Message #42 : VPN Peers                   : 10
Message #43 : WebVPN Peers                : 2
Message #44 : Dual ISPs                   : Disabled
Message #45 : VLAN Trunk Ports            : 0
Message #46 :
This platform has a Base license.
Message #47 :
Message #48 : Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Message #49 :                              Boot microcode   : CNlite-MC-Boot-Cisco-1.2
Message #50 :                              SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
Message #51 :                              IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
Message #52 :   --------------------------------------------------------------------------
Message #53 :                                  .            .
Message #54 :                                  |            |
Message #55 :                                 |||          |||
Message #56 :                               .|| ||.      .|| ||.
Message #57 :                            .:||| | |||:..:||| | |||:.
Message #58 :                             C i s c o S y s t e m s
Message #59 :   --------------------------------------------------------------------------
<--- More --->
Message #60 :
Cisco Adaptive Security Appliance Software Version 7.2(3)
Message #61 :
Message #62 :   ****************************** Warning *******************************
Message #63 :   This product contains cryptographic features and is
Message #64 :   subject to United States and local country laws
Message #65 :   governing, import, export, transfer, and use.
Message #66 :   Delivery of Cisco cryptographic products does not
Message #67 :   imply third-party authority to import, export,
Message #68 :   distribute, or use encryption. Importers, exporters,
Message #69 :   distributors and users are responsible for compliance
Message #70 :   with U.S. and local country laws. By using this
Message #71 :   product you agree to comply with applicable laws and
Message #72 :   regulations. If you are unable to comply with U.S.
Message #73 :   and local laws, return the enclosed items immediately.
Message #74 :
Message #75 :   A summary of U.S. laws governing Cisco cryptographic
Message #76 :   products may be found at:
Message #77 :   http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Message #78 :
Message #79 :   If you require further assistance please contact us by
Message #80 :   sending email to [email protected].
Message #81 :   ******************************* Warning *******************************
Message #82 :
<--- More --->
Message #83 : Copyright (c) 1996-2007 by Cisco Systems, Inc.
Message #84 :                 Restricted Rights Legend
Message #85 : Use, duplication, or disclosure by the Government is
Message #86 : subject to restrictions as set forth in subparagraph
Message #87 : (c) of the Commercial Computer Software - Restricted
Message #88 : Rights clause at FAR sec. 52.227-19 and subparagraph
Message #89 : (c) (1) (ii) of the Rights in Technical Data and Computer
Message #90 : Software clause at DFARS sec. 252.227-7013.
Message #91 :                 Cisco Systems, Inc.
Message #92 :                 170 West Tasman Drive
Message #93 :                 San Jose, California 95134-1706
ciscoasa#

InfoView is slow

Similar Messages

Maybe you are looking for