Infra Red seems not to work on my device

Dear all,
I just install the SDK on my Windows 8 machine runing on a Dell Precision M6000 with :
- Intel core I7,3Hz CPUn 16 Ram
When I run the sample from browser SDK, and select the Infrared Basic WPF demo, my Kinect screen is completly black.
Running all Other sample is woring ok, seems just the infrared.
I just would like to be sure my device is ok or not based on those test sample
What could be the problem, the room has too much light ?
thanks for advise
regards
serge

It sounds like you may need to update your graphics card drivers from the NVidia/AMD/Intel site manually.
Brekel

Similar Messages

The function AirDrop on my Mac BookAir seems not to work, not detect my iPad. How to fix this?

The function AirDrop on my Mac BookAir seems not to work, not detect my iPad. How to fix this?

AirDrop on iOS devices (iPads, iPhones, iPod touches) can only AirDrop things with other iOS devices. AirDrop on Mac can only AirDrop things with other Macs.
I hope this solves your question.
Austin

I downloaded iMovie 11 butit seems not to work with IDVD6. Do I need to get the Newest IDVD? Which IDVD is the latest and where do i download it from?

I downloaded iMovie11 but it seems not to work with iDVD6. Do I need to down load the latest IDVD?

Where do I download it from?
You need to use iDVD 09 or iDVD 11. These are only available on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
If you live in a state where Amazon collects sales tax you may prefer the link below.
http://dealmac.com/lw/artclick.html?1,527850,1872219

My select select statement seems not to work...

Hello experts,
I am having trouble with my select statement below. Here is what I need to do:
1. loop at itab it_equz.
2. get single asset number(ANLNR) and description(SHTXT) from table ITOB where EQUNR =_equz-equnr.
3. get single asset number(ANLN1), asset subclass(ANLN2 and subnumber(ORD42 from table ANLA where its asset(anln1) equals to the asset fetched by ITOB. (no. 2 step) and DEAKT eq '00000000'
4. Now, I would get all fields(select single) in table ANLC where ANLN1 equals to asset fetched by ANLA and ANLN2 equals to ANLN2 fetched by ANLA and AFABE eq '01'.
5.endloop.
Now, the problem is that I can't seem to get the right values in table ANLC. Now, my boss said that the values that I must get in ANLC must not be deactivated. So I did that by getting the required fields(no 3 step) in table ANLA where its DEAKT is equal to '00000000'.
Now, my select statement for ANLC seems not to work properly since I have the proper where conditions. Anyway, below is my select statement that I did:
LOOP AT it_equz. "no 1 step
SELECT SINGLE anlnr shtxt FROM itob   "no 2 step
          INTO (it_itob-anlnr, it_itob-shtxt)
          WHERE equnr = it_equz_dum1-hequi.
MOVE it_itob-anlnr TO it_finaltab-asset_dum.
            MOVE it_itob-anlnr TO it_finaltab-asset.
            MOVE it_itob-shtxt TO it_finaltab-description.
SELECT SINGLE bukrs anln1 anln2 ord42   "no 3 step
            FROM anla
            INTO (it_anla-bukrs, it_anla-anln1, it_anla-anln2,
                  it_anla-ord42)
            WHERE anln1 = it_finaltab-asset
              AND bukrs IN r_iwerk
              AND deakt = '00000000'.
MOVE it_anla-ord42 TO it_finaltab-asset_sub.
              WRITE it_finaltab-asset TO v_asset.
              CONCATENATE v_asset '-' it_anla-anln2
              INTO it_finaltab-asset_subnum.
SELECT SINGLE bukrs anln1 gjahr afabe knafa kansw "no 4 step
                          answl kaafa nafal aafav aafag
                          nafap aafap nafav nafag FROM anlc
                      INTO (it_anlc-bukrs, it_anlc-anln1, it_anlc-gjahr,
                            it_anlc-afabe, it_anlc-knafa, it_anlc-kansw,
                           it_anlc-answl, it_anlc-kaafa, it_anlc-nafal,
                           it_anlc-aafav, it_anlc-aafag, it_anlc-nafap,
                           it_anlc-aafap, it_anlc-nafav, it_anlc-nafag)
                        WHERE anln1 EQ it_finaltab-asset
                          AND anln2 EQ it_anla-anln2
                          AND bukrs EQ it_anla-bukrs
                          AND afabe EQ '01'.
it_finaltab-accq_cost = it_anlc-kansw + it_anlc-answl.
            IF p_posdep = 'X'.
              it_finaltab-acc_dep = it_anlc-knafa +
                                    it_anlc-nafav +
                                    it_anlc-nafag +
                                    it_anlc-kaafa +
                                    it_anlc-aafav +
                                    it_anlc-aafag.
            ELSE.
              it_finaltab-acc_dep = it_anlc-knafa +
                                    it_anlc-nafav +
                                    it_anlc-nafag +
                                    it_anlc-kaafa +
                                    it_anlc-aafav +
                                    it_anlc-aafag +
                                    it_anlc-nafap +
                                    it_anlc-aafap.
            ENDIF.
APPEND it_finaltab. CLEAR it_finaltab.
          APPEND it_equz_dum2. CLEAR it_equz_dum2.
          CLEAR it_itob. CLEAR it_anla. CLEAR it_anlc.
endloop.

Hi,
Please avoid selection in loop. it will lead to major performance issue.
avoid move statements ; instead use assignment.
1st :- select the entire data into internal table
eg:-
SELECT anlnr shtxt FROM itob
INTO table it_itob
for all entries in it_equz
WHERE equnr = it_equz-hequi.
1st select
2nd select.
2nd :- now loop on ur internal table to get the desired result.
it is good to work with internal table rather than select statements in loop.
Regards

Can the new garageband open files from the previous garageband? in my case it seems not to work and I would like to know if it is possible at all...

Can the new garageband open files from the previous garageband? in my case it seems not to work and I would like to know if it is possible at all...

No.
I find it extremely frustrating that Apple does not care for such an obvious bug affecting one of the basic funcionalities of AirPlay. Unless, of course, if there's something I don't know - but I've done some research and it seems that plenty of people have same issue and no solution is settled.

HT4437 Is it possible to zoom in photos when using airplay? It seems not to work at all. I can only zoom in if i use mirroring and even then i have to reconnect mirroring each time I chage an albumor even go from the photo to the album level.

Is it possible to zoom in photos when using airplay? It seems not to work at all. I can only zoom in if i use mirroring and even then i have to reconnect mirroring each time I chage an albumor even go from the photo to the album level.

No.
I find it extremely frustrating that Apple does not care for such an obvious bug affecting one of the basic funcionalities of AirPlay. Unless, of course, if there's something I don't know - but I've done some research and it seems that plenty of people have same issue and no solution is settled.

Dropped my iphone and now home button doesnt work and will not charge.lower third of it seems not to work.i assume it's had it.what will i lose off it?

dropped my iphone and now home button doesnt work and will not charge.lower third of it seems not to work.i assume it's had it.what will i lose off it?

rbrook0113 wrote:
I know any device could malfucntion but if it costs $40,000 to buy you could at least warn someone of the possible malfuctions. It makes the company look bad when a large amount of your devices act up and you "cant help them" if they dont pay extra. Im just saying.
Sorry but that makes no sense at all. How can they possible know what things will possible malfunction on your device? Anything that they think is highly likely to malfunction they would have addressed in desiging and manufacturing the device in the first place, during development. They've made and sold many millions of iPhones, and many of them have lasted years without any problems (I know, I've owned such iPhones personally). So how could they possible know if yours was any more likely to develop any issues than any of those other trouble free ones?
It's hardware - stuff sometimes breaks randomly. No amout of money ever guarantees or even reduces the likelyhood of random product failures.
Take it in to Apple and see about getting it fixed.

L'infra rouge n'est plus reconnu sur mon Mac / infra red is not recognized

Bonjour,
j'ai récemment installé les derniers updates de OS 10.4.8. Depuis, je ne peux plus utiliser Front View et la remote : mon mac réagit comme s'il n'avait pas d'infra rouge.
J'ai vu différents sujets de discussion à ce propos, mais tous disent d'aller dans les préférences system > onglet sécurité, et de sélectionner activer l'IR. Mais le problème, dans mon cas, c'est que comme le mac considère qu'il n'a pas d'infra rouge, et bien je n'ai pas accès à cette option !!!
J'ai essayé de réinstaller Front view, en vain : il ne veut pas car il considère que cette application n'est pas compatible avec mon system !!!!
Pouvez vous me donner un coup de main s'il vous plaît ???
Merci !!
Hello, I recently installed the last updates of OS 10.4.8. Since, I
cannot use any more Front View and the remote: my mac reacts as if it
did not have infra red.
I saw various subjects of discussion on this subject, but all say to go in the preferences system > security tab, and to select activate IR. But the problem, in my case, is that my mac considers that it does
not have infra red, and well I do not have access to this
option!!!
I tried to reinstall front view, in vain: it does not want because
it considers that this application is not compatible with my system! !
Can you give me a blow of hand please??? Thank you!!

Hello Nitrau,
Go to Apple > About this Mac > More Info - Click on USB on the left hand side and make that IR Receiver is listed.
If it is listed then pair your remote:
http://docs.info.apple.com/article.html?artnum=302545
If it is not then the computer is not identifiying the receiver.
Reset the PRAM - > http://docs.info.apple.com/article.html?artnum=2238
For Intel based machines:
From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
Unplug all cables from the computer, including the power cord and any display cables.
Wait at least fifteen seconds.
Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
Press the power button to start up your computer.
For PPC based machines:
Turn off the computer by choosing Shut Down from the Apple menu, or by holding the power button until the computer turns off.
Unplug all cables from the computer, including the power cord.
Wait 10 seconds.
Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
Let go of the power button.
Press the power button once more to start up your iMac.
If the IR still does not show up then run Apple Hardware Test from the disks that came with your computer to make sure that the IR receiver is detected.
If not then you should contact Apple for repair.
Hope that helps!
Bonjour Nitrau,
Vont à Apple > au sujet de cet imper > plus d'information -
Cliquez sur l'USB du côté de main gauche et faites que le
récepteur IR est énuméré.
S'il est énuméré alors appareillez votre périphérique :
http://docs.info.apple.com/article.html?artnum=302545
S'il n'est pas puis l'ordinateur pas identifiying le
récepteur.
Remettez à l'état initial le LANDAU - >
http://docs.info.apple.com/article.html?artnum=2238 pour les machines
basées par Intel :
Du menu de Apple, choisissez arrêté (ou si l'ordinateur ne répond
pas, tenez le bouton de puissance jusqu'à ce qu'il s'éteigne). En
débranchez tous les câbles à partir de l'ordinateur, y compris le
cordon de secteur et des câbles d'affichage. Attendez au moins quinze
secondes. Branchez le dos de cordon de secteur, en s'assurant que le
bouton de puissance n'est pas appuyé sur alors. Rebranchez alors
votre clavier et souris à l'ordinateur. Appuyez sur le bouton de
puissance pour mettre en marche votre ordinateur.
Pour PPC basé machines :
Arrêtez l'ordinateur par le choix arrêté du menu de Apple, ou en
tenant le bouton de puissance jusqu'à l'ordinateur s'éteint.
Débranchez tous les câbles à partir de l'ordinateur, y compris le
cordon de secteur. Attendez 10 secondes. Branchez le cordon de secteur
tout en simultanément appuyant sur et en tenant le bouton de
puissance sur le dos de l'ordinateur. Laissez aller du bouton de
puissance. Appuyez sur le bouton de puissance une fois de plus pour
commencer vers le haut votre iMac.
Si le distillateur IR ne révèle pas l'essai alors exécuté de
matériel de Apple à partir des disques qui sont venus avec votre
ordinateur pour s'assurer que le récepteur IR est détecté.
Si pas alors vous contactez Apple pour la réparation.
Espérez que des aides !

Why does the highlight feature seem not to work about 1/2 the time in various ibooks. I'm trying to take notes and about 50 pages into a book the highlight feature stopped working.

I've long noted that the highlight feature in ibooks is clunky and fairly limited in it's note-taking features, but the last two books I've read I've had trouble getting the highlight feature to work at all. I click and drag over text and nothing happens. I try with command depressed and nothing happens. If I double click a bunch it will eventually highlight one word, but nothing more. What gives?
Also, not to be snarky, but why can't I seem to find a button that would read text to speach for me? How do blind people use this service, or illiterate, or dyslexic, or people like myself who can learn far more from hearing then from reading.
And why does the text of a book often render so that it's haf cut off of the page?

There is a button for speech within the iBooks menu. Edit > Speech. You might be better off buying Audiobooks. You can get them from the iTunes Store or Audible.com

Smart folders seems not to work with star rating. Is there a fix?

I Rate photos with a five star rating either on iPhoto or Adobe Bridge CS5. When I create a smart folder setting the search attribute to "Rating equals 5" nothing appears on the search.

Sorry,
I think I misunderstood your question. You were talking about smart folders in the Finder and not about smart albums in iPhoto, right? "Rating equals 5" does not work on any of my machines, neither in Snow leopard nor in Lion. The problem seems to be how to represent the rating in the search string. If I search for "Rating is not 5" the smart folder contains plenty of pictures, also those with a rating of five. Does anyone know how the rating is coded to be used in a search string in the Finder?

The usb ports on my mac book air seem not to work

So, they do but it seems selective. On my 2008 iMac I would plug in my thumb drive and it was near instant but on my MBA ill plug it in on the right side and it rarely works but my mouse works fine there. On the left side it takes a few seconds then it works but it seems longer than my older macs. This computer isn't old about a week old, so ideas. Its not a mounting issue it dosen't show up in the disk utility, until it works.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".
You can return a new Mac within 14 days of purchase.
Return it and get another one.
A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

Scripts in /etc/profile.d seem not to work under certain circumstances

While already logged in, if I open up a terminal and run a script in /etc/profile.d/ to set environment variables, the changes don't seem to take. I can think of two examples:
1) Turning on KDE4 desktop integration in openoffice. I edited /etc/profile.d/openoffice.sh and changed OOO_FORCE_DESKTOP=KDE4, but when I ran the script I got an "export: command not found" error.
2) When replacing Sun Java with OpenJDK in order to compile and use 389-console from the AUR, I got caught up on one of the dependencies, ldapjdk (also from the AUR). The PKGBUILD for this package contains the following block of code:
which ant
if [ $? -eq 1 ]; then
. /etc/profile.d/apache-ant.sh
fi
ant dist
In theory this should work, as /etc/profile.d/apache-ant.sh contains the following two lines:
export ANT_HOME=/usr/share/java/apache-ant
export PATH=$PATH:$ANT_HOME/bin
However, upon running makepkg I got an error about "ant" not being in my path. To get around this I just edited the PKGBUILD and put the full path to ant, but this shouldn't have been necessary. The original PKGBUILD should have worked. I seem to have something out of whack and I don't quite know what. If anyone could be of assistance, it would be much appreciated.

I'm well aware of this. I never said that I started openoffice from the plasma menu. I never even started it. /etc/profile.d/openoffice.sh errored out without setting the environment variable in the current shell session. If it had worked, I would have been able to run openoffice from the terminal to test the new environment variable, which is what I was intending to do in the first place. There's no need to logout to test these sort of changes, they can be done from the terminal.
Your solution also doesn't address the problem I had in example #2, either. makepkg should be able to set environment variables in the current shell session, using the /etc/profile.d script detailed in the example. Running makepkg has nothing to do with my graphical session.
I know that logging out and back in will "fix" the problem, but that's not the point. The point is that a script which should be able to set an environment variable is not working properly.
Last edited by archtaku (2010-08-21 00:58:53)

I tried to copy a formula from one field (max of a, b) to another (min of a,b). Paste seems not to work.

Hello,
I am creating a form from a PdF file. In this form, there is a lot of calculated fields with formulas adressing the same fields (ie : max of a,b,c,d and min of a,b,c,d).
As the process to select the fields you use for the formula is a rather slow one, I tried to copy the selected fiels from one field to another (select the fields in the properties window, right clic, then copy). I couldn't paste what I copied.
I work with Acrobat X pro, in win 7.
Thanks for your help

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

XSQL and insertion in temporary table: seems not to work

Using XSQL 9.0.2.0.0 and 9i Database.
XSQL does not really inserts rows in temporary table.
Given a regular table and a temporary table:
create table toto (id number, name varchar2(30));
create global temporary table toto_tmp
on commit delete rows as
select * from toto where 1=2;
-- XSQL database connection is set to <autocommit>false</autocommit> in XSQLConfig.xml
-- XSQL insertion in regular toto table:
-- with commit-batch-size="0" xsql:insert-request does not issue commit:
<xsql:insert-request commit-batch-size="0" table="toto" transform="params.xsl"/>
<xsql:dml>
begin
-- PL/SQL processing
commit;
end;
</xsql:dml>
-- Data inserted in table TOTO are "seen" from the XSQL:DML block
But if inserting in temporary table TOTO_TMP using:
<xsql:insert-request commit-batch-size="0" table="toto_tmp" transform="params.xsl"/>
the XSQL:DML do not see the inserted rows !
This works as if commit-batch-size="0" had no effect when using temporary table!
Thank you for help.

Hi Subhash,
thanks for your help.
We are on AIX on our database sever and using Oracle 11.
Our app servers are using on Linux.
Best regards
Carlos

AUS auto populate device seems not to work.

I'm running CSM 4.0.1 and followed the instructions on how to use CSM to update an ASA5540 filewall through AUS. I created a policy in CSM with the AUS IP address and credentials and chose 'Device' to deploy to.
On page 1-3 of "Getting Started with AUS" it states: When you use Security Manager to deploy configurations to a device through AUS, the device is automatically added to the AUS inventory after the device successfully contacts AUS and retrieces the configuration. This is the normal method for adding devices."
The AUS fails the attempt with this error message:
CALLHOME-DB-DEVICE_NOT_FOUND: Record for device with ID Remote-ASA-1 could not be found. Action: Please ensure the device was added to the AUS and that the device config contains the correct device ID.
And the ASA device (8.4.1) with debug turned on, displays this error msg:
Remote-ASA-1# Auto-update client: Sent DeviceDetails to /autoupdate/AutoUpdateServlet of server 164.72.44.162
Auto-update client: Processing UpdateInfo from server 164.72.44.162
Auto-update client: Failed to contact: https://164.72.44.162/autoupdate/AutoUpdateServlet, reason: ErrorList error code: CALLHOME-DB-DEVICE_NOT_FOUND, description: Record for device with ID Remote-ASA-1 could not be found.
It's complaining the the device ID is not found. But the hostname of the ASA is the same as the device ID in CSM.
Is there something I'm missing or not doing for this to work?

Hello Jeff,
there are few things to make the AUS work, let's try to list it and make sure we have everything in place.
1- we need to configure the device for AUS. Let do it via CSM:
in the Device View select your firewall and configure your AUS server via
Device Admin ->Server Access->AUS
The ip address will be the same as CSM and credential the same you use to login in the CSM Server
2- deploy to the ASA to make sure it has teh AUS config. The config deployed should look like:
auto-update device-id hostname
auto-update server https://*@/autoupdate/AutoUpdateServlet source
3- make sure that the hostname of the device is THE SAME as the display name in CSM (you can check that by right clicking on the device and click on device properties)
4- we are now ready to setup the AUS server. Right click on the device and select Device Properties. In the Autoupdate section (at the bottom)
complete the fields by putting all the needed info. The server name and ip address should be the same as the CSM (AUS is running on the same server)
and the credentials are the same used to login in the CSM gui and used at point 1
5- Once this is setup, you are ready for the first deployment. It is important to deploy just after because the CSM needs to create the right configuration file on the AUS server. After the first deployment you should be able to see the device listed in the AUS portal (under devices)
Let me know if it worked.
Stefano

Infra Red seems not to work on my device

Similar Messages

Maybe you are looking for