Infrastructure and forms server into same machine
Dear friends,
I am faching strange problem
, I install 9ias(9.0.2.0.1) infrastucture and form server into same machine,
after sucessfull installation it is mention infrastucture will run the port 7777 and form will 7778,
but after just installation it work into these ports but when i restats the system then port of infrastucture change and it is 7779.
now if i run forms the it give internal error 500,
then I stop fist infrastucture http server then http server of form
and again first start infrastucture hhtp server then form http server
now agin infrastructure server port id 7779(insted of 7777)
but now my form work properly.
every day i do this job , but some time this method fails then i have to again install server and have to repeate above mention job .
pls help me
With regards
Siddharth Singh
[email protected]
Mid-tier listens on a lot of ports. On a std install (with both Infra and Mid-tier) Web-cache listens on port 7778 "in front of" httpd for OHS on 7779. So perhaps you forget to start web-cache? (run from BI home: webcachectl)
Perhaps the problem with Forms is related to X Toolkit?
Similar Messages
-
I want to run IIS and Form Server on same machine
Dear follows
I have problems , porblems is that i want to run IIS and Form
Server at same machine but i m facing some problems so please
inform me right proceduers to run this services at same machnine
now i m using Windows NT .
My secone problems is that i want to send emai via oracle
reports , actuall condition is that i have oracle report and i
want to add button and behind this boutton i want to add trigger
to send this report as a emai to client as txt/html format.There shouldn't be any problem running both forms server and IIS
on the same machine. Just make sure the ports that are used are
different. IIS's default port is 80, so either change this port
number or change it for the Forms server's web listener.
You can send reports to email if you use DESTYPE=MAIL. -
CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
Reply
Dear Friends,
I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
at this time my database was into another machine.
then i installed oracle 9i database into the same machine
(as the oracle 9ias was installed)
at the instalation of oracle 9i database one error comes
and shows that Agent configuration Assistant Installation
fail.
but After installation of database it work properly.
there is no problem.
but when I try to run from through web(by using oracle 9ias)
it gives Internal error(500).
i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
With regards
Siddharth Singh
[email protected]Hi James,
Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
If yes what is the version of RH Linux you were using ?
Any docs for that ?
[email protected]
Regards
Amudharasu -
Is it possible to install Oracle 9i and SQL server on same machine
1. Is it possible to install Oracle 9i and SQL server on same machine ?
2. If yes, what are the problems i may encounter during installation
3. What should be hardware configuration for installing both databases in same machine like hard disk space, RAM speed etc,Hi,
1. Yes you can do it.
2. There shouldn't be any problems
3. Depends on your needs
Jarek -
How to instal FMS and Wowza Server on same machine.
I want to to instal FMS and Wowza Server on same machine any one know about this please guide me about this.
Thanx in advance.I have on one server installed both red5,fms and wowza
first install red5 ( by default it uses port 1935 obviously )
then let say wowza , with installation choose port 1936 ( make sure you open this port )- you app will run on rtmp://your-ip/domain.com:1936
then fms - choose port 1937 ( here again make sure you open this port too ) - rtmp://your-ip/domain.com:1937 -
Installing All (9iDB,9iDS and report server) in same machine
I want to use one machine only.
I have installed 9i database, and on same 9iDS.
and created a report server on same machine
i am facing a problem
all application runs very fine but on running report from
forms by using webs.show_document()
a new page comes and states
Opening page http://server1:8888/reports/rwservlet/getjobid..
and hangs there only.and it hang such that after closing the page
application also does not work.i have to restart OC4J
i have seen in trace file report finished successfully
and also in report\cache directory report file is alreasy made.
now when i install 9iDS in another machine and use the other machine as application server,report server be in
any machine it work fine.
all report are displayed. no problem comes in that case.
But i have to use only one machine .
pls state me solution
thanks a lot
regards
rajI HAVE SEEN IN JINIT CONSOLE
trace level 5
on server where (9iDS and database both installed)
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477
Connecting http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477 with no proxy
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477
Connecting http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477 with no proxy
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd84987
and so on..
on another machine
from where reports comes
this is trace file
Connecting http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448 with no proxy
Connecting http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448 with cookie "getfileauthid=c0roXNhhSA=="
Opening http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448
now i see in first stage it is not connecting with
cookie -
Starting Admin and Managed Server on Same Machine
Has anyone come across a method of running both their admin server and managed
servers as a Service and on the same machine. As you can see, when the OS comes
up both Services for the servers will be started. I can put in a dependency on
the managed server saying that the admin server needs to be started but that doesn't
guarantee that admin server will be ready for "prime time."
I have seen somewhere in a support message something about a "depend" and "delay"
flag for the beasvc.exe program but the one I'm using doesn't seem to support
this.
Here is my setup:
Windows 2000 Pro
Weblogic Server 6.1 SP1
Any assistance is appreciated,
RichJohn Hufnagle wrote:
> Is it possible to run cluster admin server and one of the managed servers on the
> same machine...(just preserving machine resources for in-house testing).
As Kumar said, it is possible to run the admin server and one (or more) managed servers
on the same machine.
>
>
> If the admin listens on 7001/7002 can I just set up the managed server to 7003/7004
> or will I also run into problems with the multicast address?
Since the admin server is not part of the cluster, it is perfectly fine to use a
different set of ports for the managed servers as long as all servers in the same
cluster use the same ports...
Hope this helps,
Robert
-
Instalation of oracle8i server, application server (forms server) on same machine
Hello people.
I have one question.
I have to install on the same machine:
Oracle 8i Server (817) and the forms server.
When i install the Forms6i + Oracle Database, it works fine.
But when i install the Oracle Database + Ora9ias Enterprise Edition, I verified that there is not the files and directories of forms (when I installed on unix, there were the directory 6iserver).
What steps I need to install the application server?
Do I need to install the Forms6i before install Application Server?
ps) I want to install the Oracle 9ias to use the apache+servlet, and i dont want o use the forms server because i would need one port to use it.
Thanks Very Much
EmersonCan I install A Central Instance of SAP ECC 6 on the physical server which is already running active directory / domain controller services?
Can I park my car in the companies CEO spot?... I can. Is it a good idea??.. maybe not.
Regards, JP -
Admin and Managed Server on same machine
Is it possible to run cluster admin server and one of the managed servers on the
same machine...(just preserving machine resources for in-house testing).
If the admin listens on 7001/7002 can I just set up the managed server to 7003/7004
or will I also run into problems with the multicast address?
John Hufnagle wrote:
> Is it possible to run cluster admin server and one of the managed servers on the
> same machine...(just preserving machine resources for in-house testing).
As Kumar said, it is possible to run the admin server and one (or more) managed servers
on the same machine.
>
>
> If the admin listens on 7001/7002 can I just set up the managed server to 7003/7004
> or will I also run into problems with the multicast address?
Since the admin server is not part of the cluster, it is perfectly fine to use a
different set of ports for the managed servers as long as all servers in the same
cluster use the same ports...
Hope this helps,
Robert
-
Can i install Ora9iAS Infrastructure and Ora9iAS Midtier in same machine??
Hello,
I want to clarify whether i can install the Ora9iAS infrastucture and Ora9iAS midtier in the same machine?? Since i try to install but giving error on this
Unable to verify connection to this OID instance. Please verify your Hostname, Port, username and Password or verify that the OID services is running.
I'm not sure whether there is anything wrong?? Please help.
Thanks.Hi,
Yes you can install Oracle9iAS Infrastructure and Middletier on same m/c. However you need to install both of these in different oracle home and install infrastructure prior to middletier.
Regarding to your problem...
During middletier installation you will be prompted for infrastructure hostname and port number. Ensure that you enter just the 'hostname' and NOT 'http://host'
Also check that 'host' file on the server machine is updated. This file is located at C:\WINNT\system32\drivers\etc. You have to make entry for ip address and hostname in this file.
Another note: Oracle9iAS installation needs 'fully qualified hostname'. i.e. just 'myhost' won't work. try myhost.mycompany.com
Your host file entry will look like
80.81.82.83 myhost.mycompany.com
Refer to http://otn.oracle.com/products/ias/install-faq.html for further details. especially point # 11 and 15
Regards,
Rakesh -
Multiple Forms Server on same machine
Currently I'm running a development forms server instance on a Sun SPARC server. The client would like to have a QA environment set up on the same server.
Must I install Forms Server to another, separate home directory?
Has anyone else tried this? The development and QA user population is small; < 25 in total.
Thanks,Check this doc
Common Tasks Performed in the DAC
Mark if helps
~ http://cool-bi.com -
Calendar Server and Email Server on Same Machine - Email Issue
Hi.
I've installed email and calendar on the same host. The email domain for test purposes is the name of the machine. I noticed in the configuration guide, it says that if you put the calendar server and email server on the same machine you need to configure sendmail.cf and modify incoming rules in order to get email reminders from Calendar to Email. I have done this but am still not able to. I get the emails kicked back to root and they say:
553 5.3.5 System Config Errors
553 5.3.5 <machine name> config error: mail loops back to me (MX problem?)
Has someone seen this before?
Thank You,
MattHi Russ,
We have the same problem as Matt.
We have properly set up OCS Email it works well both inside and outside our network.
The only thing that appears not to be working is the email notification capabilities of OCS Calendar.
We have changed sendmail.cf as stated in the documentantion.
we are using -
RedHat Advanced Server 2.1,
sendmail 8.11.6
bind 9.1.3
I would be very gratefull of any information on this, as we're out of ideas... -
Mail and web server on same machine
hi to all,
i have jes 4 suite installed on the same machin: uwc runs on port 81 and 443 (secure) and mail can be accessed on:
https://mail.dom.com
I want to create a new web instance to host the web content. It will be access at:
http://www.dom.com
What needs to be done so that users do not access
https://www.dom.com as web mail
and http://mail.dom.com as web server?
thanks!
Linda.What is on port 80 is the webserver that should host the website.
What is on port 81 is the webserver instance hosting the webmail. I installed a certificate and created a new LS so that users access the webmail through https. port 81 is firewalled.
There is no command called 'host' on Solaris. Actually the DNS admin will register www.dom.com and mail.dom.com to have the same IP since mail and web are installed on the same machine.
The server processes that exist should be the mail processes and the 2 web instances processes. the first instance should listen to port 443 and 81. The second instance should listen to port 80.
the urls that a user might type:
https://mail.dom.com
http://www.dom.com
http://mail.dom.com
the last url is what I want to change. Normally this should display the website. I don't want this result. I want to display the webmail page i.e. https://mail.dom.com. If this is not feasible, I want to display a page showing the 2 other urls.
thanks, -
NT CWS and Search server on same machine?
Should they be?
Thanks
MYou are allowed to install the Windows Content Service and the Search Server on the same machine. Note, however that the Search Server likes to have plenty of memory. The Search Server will try to keep as much of the index in memory for performance reasons. As your Knowledge Directory grows, the Search Server will want to have more memory.
-Paul -
Forms and report server on same machine
dear fellows if i install form 6i server and after it install
report server they override each others setting and only one
runs (later ) any help
thankxLook at the listener/cfg directory at the webdbsvr.cfg file and
back up the directory mappings there.
some of them are getting overriden when you install reports
after forms. Just add them back to the file after you finish the
installation.
Maybe you are looking for
-
Remote Access VPN - Unable to Access LAN / Inside Network
Hi, I am facing a problem with Cisco ASA remote access VPN, the remote client is connected to VPN and receiving IP address but the client is not able to ping or telnet any internal network. I have attached running configuration for your reference. Pl
-
How can I embed a HTML document onto my webpage?
What I am trying to do: I am trying to make an image that has links to urls from different parts of the image. What I have done so far: I have built a photoshop image to embed on my webpage, following the instructions offered by many online forums, b
-
SOD's are not shown in the Report
We have created the connector in Compliance Calibrator for MQA system We ran the user Full Synch and Incremental Synch. But the Sod Report doesn't show any SOD's. SOD's are shown for the different system's the user has same Roles in the two systems.
-
Annual Oracle OpenWorld 2014 User Community Cloud SIG meetup
Each year at Oracle OpenWorld and then at the Collaborate User Conference, the IOUG Cloud SIG invites participation from customers and partners interested or building Clouds using Oracle product technologies. A brief history on the SIG here Just prio
-
Complex queries still available in Forms 10g?
Hi, Is it still possible in Enter-Query mode to enter the '&' sign, get the Query criteria box, then enter any complex query one wants? Thanks, Armando