Infrastructure Install Into Existing DB?

I have a box running 9i v 9.2.0.1 I need to use Infrastructure (for Discoverer). Is it possible to install the Infrastructure repository into an existing database so that I don't have to run two DB instances?

Hi,
Not yet..
The next release of 9iAS (9.0.4) will have support to install the infrastructure in an existing DB.

Similar Messages

Tree requirments for Linux install into existing tree

I am in the planning stages to move my GroupWise 8 installations from Netware 6.5 to Linux.
From my understanding, I thought the tree needs to be at DS 8.8.x to install a Linux server. The question I have is my Netware 5.1 servers. I need to keep at least one of them for an old Btrieve application that does not run correctly with Btrieve on Netware 6.5.
Can I keep my Netware 5.1 server in the tree as long as it does not have a replica? Or do I need to create a separate tree just for the Netware 5.1 server.
thanks
Phil J.

On 01/20/2014 10:26 AM, PhilJannusch wrote:
>
> I am in the planning stages to move my GroupWise 8 installations from
> Netware 6.5 to Linux.
Great choice!
> From my understanding, I thought the tree needs to be at DS 8.8.x to
> install a Linux server. The question I have is my Netware 5.1 servers.
No, not to install a regular Linux server. It'd probably be a good idea
to build a test tree with a current version of eDirectory and then import
schema between the two trees so that schema updates are all complete
before adding a real server into your NetWare-only tree, but nothing here
requires 8.8 at all. eDir on Linux has been around since 8.7 if not 8.6,
meaning well over a decade.
> I need to keep at least one of them for an old Btrieve application that
> does not run correctly with Btrieve on Netware 6.5.
>
> Can I keep my Netware 5.1 server in the tree as long as it does not have
> a replica? Or do I need to create a separate tree just for the Netware
> 5.1 server.
Sure, it's probably find to keep in the tree, especially if it has no
replicas. eDirectory is one of the best products I've ever used for
inter-version compatibility.
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

Can we install exchange infrastructure into existing server?

can we install exchange infrastructure into existing server?
I have installed ECC6 IDES,now I want to install XI, Can I install it to ECC6 IDES server ?
how to install ?

Hi
Check this note may help you
Note 883948 NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Regards
Uday

I need to install my existing photoshop into new pc

I need to install my existing photoshop into my new laptop as this one is about to crash. Please infor how to download and move to new pc.

I have CS6 on my laptop and need to transfer it to my desktop/ I have copied it onto a memory stick (as previously advised by yourselves) and thence onto my desktop. I now get error message 1 and advice to uninstall, but nones of the exe files work so what do I do now? Waited 18 minutes on the phone this pm really do not have time for this can someone please help.

Installing OES 11 SP3 into Existing OES 11 SP1 tree

It been a while since I personally have installed a server into an existing Edir tree, never done it on Linux/OES. Can someone give a quick checklist I can follow that will aid me installing the new OES 11 SP3 into our existing EDir tree?
I am reading the OES 11 Documentation and it seems to me there should be some more server / tree health checking done before installing. I cant remember the command to check tree health right now either.
Thanks in advance,
Ken

Thanks for the reply. For some reason I remember more checks having to be done. But it has been several years and it was on Netware.
Thanks for the information,
Ken
Originally Posted by ab
OES 11 SP3 does not exist; I presume you mean OES 11 SP2.
The documentation should have everything you need. If you want to check
health further there are TIDs to do an eDirectory health check, but the
only thing I ever bother doing outside of looking things over briefly in
iMonitor (agent summary, obituary report, check the replica-ring for
non-green stuff) and time checking (be sure time is in syhnc, which is an
OS issue) is perhaps install a new test server into its own tree from
which I can import schema into the new tree. It is not required, but it's
one less thing to have fail during the real server install into the
existing tree.
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

I just purchased a new MacPro to replace my existing 2006 MacPro which cannot be undated with the new operating system. My question is what is the safest way to transfer all my files. 1) simply install my existing 2TB HD into the new Mac Pro or 2)

I just purchased a new MacPro 3.2GHz Quad-Core Intel Xeon processor to replace my existing 2006 MacPro 2 x 2.66 GHz Dual-Core Intel Xeon because it cannot be undated with the new Lion operating system.
My question is what is the safest way to transfer all my files to the new computer. 1) simply install my existing 2TB HD into the new Mac Pro, set it as the startup drive, and update its10.7 operating system or 2) or use the migration program.
I'm concerned that simply installing the existing 2TB HD, I may have issues with it not recognising some infromation written for the old 2 x 2.66 GHz Dual-Core Intel Xeon.

your new system runs 10.6.8 just fine as has been said and stated many times.
I would clone it first.
I would even clone the original system it has.
And if you have or want to use Lion and then Mountain Lion, fine - I would still keep backups of every OS.
I am not a fan of putting the OS and Apps plus all the data all on one drive. I like to keep them separate.
Whatever OS, rerun the last combo update is all and any other updates.
And by "new Lion" I assume you don't mean 10.7 but "Moutain" 10.8. Part of me says keep Lion and SL around, and test and try out ML with your apps and other hardware you may have. After too many years, waiting for 10.8.1 - and give everyone time to update their apps and retest.

Solaris 9 Oracle 10.1.0.4 (release 2) install into current database?

How would I install a newer version of Oracle using the old tablespaces and other database objects (controlfiles, undo, dictionary, schemas, ...
Can I install 10.1.0.4 into a new directory and somehow make it own the stuff from 10.1.02?

10.1.0.4 is not 10g Release 2, but only a patch level of Release 1 (of course higher than 10.1.0.2. Patches have always to be installed into the existing ORACLE_HOME, if you plan to install Release 2 , you have to install it into a new home.

Why does the iTunes 64 installer install into the Program Files (x86) directory and run in 32 bit mode?

I have just installed this and even tried to manually get it to install in the "Program Files" directory. Programs installed into the "Program Files (x86)" directories are 32 bit apps. This is where the iTunes64Setup file installs to. Is this intended? If so, why call it iTunes 64 bit ? It is compatible in this mode, but iTunes actually running in 64 bit mode could drastically improve performance and processing of large libraries.
Please advise if this is a known issue or if iTunes 64 bit even exists.

The 64-bit version of iTunes is a mixture of 64-bit and 32-bit componentry. You'll also notice on your PC that some of the componentry for iTunes itself is installing in the iTunes folder in the Program files directory (such as the miniplayer). The GEAR drivers used for burning and importing are 64-bit. The iPod service is 64-bit. AMDS is 64-bit. Bonjour is partially 64-bit.
It's normal to see the itunes.exe process running as 32-bit on a 64-bit system.

Build and emulate not installing into emulator Android API 14

I have test PhoneGap mobile app, which was working 100% and still is, the only issue is that it will not install into emulator.
This appears to be only since Android API 14 and the imporvements to the build. I have exhausted all possibilities i could think of within my skill set without luck.
Any help or ideas would be greatly appreciated
relavent portion of buildlog below:
buildfile: C:\Users\Craig\Desktop\COMFUS~1.FLO\build.xml
install:
     [echo] Install file not specified.
     [echo]
     [echo] 'ant install' now requires the build target to be specified as well.
     [echo]
     [echo]
     [echo]     ant debug install
     [echo]     ant release install
     [echo]     ant instrument install
     [echo] This will build the given package and install it.
     [echo]
     [echo] Alternatively, you can use
     [echo]     ant installd
     [echo]     ant installr
     [echo]     ant installi
     [echo]     ant installt
     [echo] to only install an existing package (this will not rebuild the package.)
BUILD FAILED
C:\Data\android-sdk\tools\ant\build.xml:1098: The following error occurred while executing this line:
C:\Data\android-sdk\tools\ant\build.xml:1141: No message
Total time: 0 seconds
Running app in Android emulator
<DW>
set ANT_HOME=C:\PROGRA~2\Adobe\ADOBED~2.5\CONFIG~1\NATIVE~1\APACHE~1
set ANDROID_HOME=C:\Data\android-sdk
set JAVA_HOME=C:\PROGRA~2\Adobe\ADOBED~2.5\JDK
set PATH=%JAVA_HOME%\bin;%PATH%
cd C:\Data\ANDROI~2\PLATFO~2
C:\Windows\SysWOW64\cmd.exe /u /c C:\PROGRA~2\Adobe\ADOBED~2.5\CONFIG~1\NATIVE~1\DWPHON~1\android\scripts\ANDROI~2.BAT com.fusion.flowbox_cell C:\Data\android-sdk
</DW>
Starting: Intent { act=android.intent.action.MAIN cmp=com.fusion.flowbox_cell/.DefaultActivity }
Error type 3
Error: Activity class {com.fusion.flowbox_cell/com.fusion.flowbox_cell.DefaultActivity} does not exist.

I found a solution and posted it in http://forums.adobe.com/thread/918202?tstart=0

How to add the library of linphone into existing project ?

How to add the library of linphone into existing project ?

How to add the library of linphone into existing project ?

Loading data from .csv file into existing table

Hi,
I have taken a look at several threads which talk about loading data from .csv file into existing /new table. Also checked out Vikas's application regarding the same. I am trying to explain my requirement with an example.
I have a .csv file and I want the data to be loaded into an existing table. The timesheet table columns are -
timesheet_entry_id,time_worked,timesheet_date,project_key .
The csv columns are :
project,utilization,project_key,timesheet_category,employee,timesheet_date , hours_worked etc.
What I needed to know is that before the csv data is loaded into the timesheet table is there any way of validating the project key ( which is the primary key of the projects table) with the projects table . I need to perform similar validations with other columns like customer_id from customers table. Basically the loading should be done after validating if the data exists in the parent table. Has anyone done this kind of loading through the APEX utility-data load.Or is there another method of accomplishing the same.
Does Vikas's application do what the utility does ( i am assuming that the code being from 2005 the utility was not incorporated in APEX at that time). Any helpful advise is greatly appreciated.
Thanks,
Anjali

Hi Anjali,
Take a look at these threads which might outline different ways to do it -
File Browse, File Upload
Loading CSV file using external table
Loading a CSV file into a table
you can create hidden items in the page to validate previous records before insert data.
Hope this helps,
M Tajuddin
http://tajuddin.whitepagesbd.com

List of apps that install into C:\?

What are The list of apps that install wholly or partially into C:\?
I noticed that PhotTool by default will install its cache files into C:\. Handy Backup installs its data there. It may be a concern if the phone keeps crashing without anybody knowing why. The disk may become full silently.
Which other apps installed into C:\.

That is highly dependent on how the app is designed or developed. There is no way to know that unless you ask each developer.

Can not add new VMS into existing clustered server pool

For some reason, we reinstall VMM (3.1.1-416) with existing UUID and rediscover all VMSs. The process went smooth and the whole system looks clean without dead objects any more. The guest VMs are all working fine. However, the new added VMS in unassigned servers are not displayed in the "Available Servers" when we want to add into existing clustered server pool, but it is shown when we add into unclustered server pool. Anyone has clue or possible way to debug what's wrong.
Thanks,
Shun-Jee Liu

The issue is resolved. The access group in shared iSCSI is not properly configured.

Adding a file into existing zip file

I need a add a file into existing zip file. and write into printwriter.
How to do it?
Waiting for the reply.
Thanks and Regards,
Narayanan. G

Narayanan.G wrote:
I need a add a file into existing zip file.API: [ZipOutputStream#putNextEntry()|http://java.sun.com/javase/6/docs/api/java/util/zip/ZipOutputStream.html#putNextEntry%28java.util.zip.ZipEntry%29]
Tutorial: [http://java.sun.com/developer/technicalArticles/Programming/compression/].
and write into printwriter.Writing a zip file into printwriter? Huh? Please elaborate.

Inserting new line item into existing delivery using BAPI

Hi
can you send me the code for inserting new line item into existing delivery either using BAPI or
Function module.
We are using SAP 4.7 version

Hi Sreekanth,
Refer to this links
New item for outbound delivery via FM/BAPI?
/message/3976349#3976349 [original link is broken]
BAPI_OUTB_DELIVERY_CHANGE Help - Add new line item
hope it is useful to you.
Regards!

Infrastructure Install Into Existing DB?

Similar Messages

Maybe you are looking for