Infrastructure Navigator 1.2 monitoring and alerting

I was under the impression that Infrastructure Navigator did monitoring and alerting of services and applications where if something stopped working or had issues it can notify you via something like email or SMS etc. From what I have seen it appears that it only shows you what services are running on a VM and the dependencies it has with other servers. Is that the case or am I missing something?

Take a look at http://www.vmware.com/products/datacenter-virtualization/vcenter-infrastructure-navigator/overview.html:
vCenter Infrastructure Navigator automatically discover application services, visualize relationships  and map dependencies of applications on virtualized compute, storage and  network resources. A component of the        vCenter Operations Management Suite,  vCenter Infrastructure Navigator enables application-aware management  of infrastructure and operations to better understand the impact of  change, provide more complete disaster recovery protection and minimize  downtime.
Automatically discover and keep up-to-date the names and version numbers of application components and services
Visualize application relationships, communication paths and  backend connections at the infrastructure, guest OS and application  level
Map dependencies of application components on the underlying  virtual infrastructure to understand the impact of change and build  disaster recovery plans with confidence
The use case you describe is more relevant to vFabric APM - VMware's perfomance management suit which among other capabilities, will alert and notify in case of application performance issues, unavailable services etc. take a look at http://www.vmware.com/products/application-platform/vfabric-application-performance-manager/overview.html

Similar Messages

  • Monitoring and Alerting Infrastructure : Errors raised during Event Calculation

    Hello together,
    System: Solution Manager 7.1 Sp7
    since one day I get this alert every five minute: "Monitoring and Alerting Infrastructure : Errors raised during Event Calculation".
    Name....................Errors raised during Event Calculation
    Start Time..............20.03.2014 15:12:27 CET
    End Time................20.03.2014 15:12:27 CET
    Managed Object..........Monitoring and Alerting Infrastructure
    Managed Object Type.....Technical Component
    Rating..................Red
    Category................Exceptions
    Status..................Open
    Opening the alert shows this:
    E2E Alert Analysis Report:
    This metric outputs the der Event Calculation Engine (ECE) error messages. The ECE runs by default every minute, under the job name SAP_ALERT_CALCULATION_ENGINE, which then starts the report ACE_CALCULATION_CONTROLLER.
    Analyze the error messages in the Application Log, as follows:
    Start the transaction SLG1, and enter the object E2E_ALERTING and subobject ENGINE.
    When opening trx SLG1 I can see this error:
    Aggregate for managed object 00215ACCD6DE1EE2B8FEE39484598162, type
    80E0ED08ADA71DEEBFD84650DEF6421F not found.
    How can I fix this?
    Thank you very much.
    Regards,
    Ralph

    Hi Ralph,
    We are facing the same issue is our system. I have checked the specified note and observed that few of the systems had to be updated in Managed System Configuration. I have updated the systems. But, the alerts have not stopped.
    Can you please tell me the procedure to resolve this issue?
    Thanks.
    Regards,
    Deepika R

  • Monitoring and Alerting tools for Business Object Data Integrator

    Hi,
    We have Business Objects DI installed in AIX 5.3 environment. Please advise any type of monitoring and alerting tools for DI.
    Monitor tools to monitor Job servers(like job service and web services running properly) and also to monitor long running extraction jobs and alerting the same. Thanks.
    Thanks.
    Raj.

    Hi Thomas
    Though both the tools objectives are for Data integration, the purpose for both tools are different.
    SAP BODS/ BOBJ Data Integrator is an ETL tool which involves combining data residing in different sources and providing users with a unified view of the data
    SAP PI is a Middleware/EAI tool which have a mechanism/technology that connects different parts of an application or a series of applications
    SAP BOBJ Data Integrator
    Bulk Data Integration
    Extraction Transformation and Loading
    Deals of huge volume of data
    SAP PI
    It is process based integration of application data
    It is a middle ware which integrates various project applications into a common programming package that can be operate/access as a single application
    SAP NetWeaver PI is SAP’s implementation of Service-oriented Architecture (SOA) middleware and facilitates the integration of business processes that span different departments, organizations, or companies.
    SAP PI uses SAP NetWeaver Application Server and message servers where in fail over cases the messages can be resent again.
    The below differences will gives you more clarity
    Verdict is we can use both the tools for data transfer/migration and for choosing the tool depends upon the business requirement
    Please reply back if you need more information.
    Regards
    Murthy

  • Operations Manager 2012 R2 : how to find all my rules, monitors and alerts (all in one custom MP)

    How do I find all the rules, alerts, monitors and whatever in a give custom Management Pack?
    All the bits and pieces I have created I have stored in a MP called "1 - MYDOMAIN CUSTOM"
    Now suppose I want to review all my customisations. How do I do it? I had hoped that it would appear in a scope somewhere...
    CarolChi

    Many thanks
    1) I can't find this: in the Authoring Console I have
    management pack templates, distributed applications, groups, management pack objects
    In Management Pack Objects I have Attributes, Monitors, Rules, ... but no where can I find ALL the customisation I have done.
    2) Where can I find an example of powershell?
    3, 4) Where do I get the override explorer. I was hoping not to have to use other tools.
    5) I read that the Efffective Configuration Tool works with older versions of OpsMgr - is this true?
    6) Again can you help with a link to the MP Viewer Tool?
    CarolChi

  • Central PI Monitoring and Alerting in Solution manager

    According to SAP AG documentation [White Paper|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/104677d9-fc8c-2e10-dc92-c4e660b0dd8c?quicklink=index&overridelayout=true] - the Solution Manager 7.1 onward provides a central PI monitoring for technical componnents and buisness alerts in a single dashboard.
    My question is : does the ALE monitoring status also included in this monitor?
                               does the SAP PI IDoc adapter (ABAP Based) of PI 7.11 can be monitored there as well?

    Hi,
    As per the below help.com ALE/Interface monitoring still part of the Business process monitoring.
    http://help.sap.com/saphelp_sm71_sp01/helpdata/en/c7/42f64707c04207b1b17a610c436a34/content.htm
    But again PI Idoc adaptor can be monitored using channel monitor of PI monitoring.
    http://help.sap.com/saphelp_sm71_sp01/helpdata/en/6a/b663dd510549d58456c38c5d2e0da0/content.htm
    Please check,
    Thanks,
    Jansi

  • Adapter monitoring and Alerts

    Hi,
    I have configured a sender e-mail adapter. The adapter is polling the inbox of an e-mail account. Is it possible to monitor this action with alerts?
    E.g. the email account is locked. So the adapter in the adapter monitoring is red and shows an error message. Is this error picked up by the alerting framework?
    I don't get any alerts on this situation.
    Ron

    Ron,
    Like mentioned , check the note 913858 .
    Also, just try this,
    Make where the error occured as ALL ( INCLUDE INTEGRATION ENGINE and ADAPTER ENGINE ) and then test the user and see if the Alerts are generated.
    Also, check for any dump in St22
    Regards,
    Bhavesh

  • CIF queue monitoring and alerting

    Hi Gurus,
    Is there any way we can have automatic monitoring of number of CIF queues .i.e if the CIF queues goes beyond a certain number, then I should get an email alert.
    Or if I can get the alert configuration for number of entries in SMQ1 or SMQ2, it'll be great.
    Thanks in advance ...
    Regards,
    Surendra

    Hi Surendra,
    I believe your APO Basis team might have an answer for the question.
    And in case you are talking about the post processing errors, you can use the transaction/SAPAPO/CPPA. Even using this, will not tell you the number of post processing queues, but, its capable to telling you the number of users that initiated the queues. This transaction is capable of sending an email and by varying settings, it sends the number of messages equal to number of initiators of the queues.
    Else, as already suggested, writing a report would be the option.
    Cheers,
    KC.

  • Transaction linking, Monitoring and Alerting product

    Hi,
    I wanted to check if there is any product from BEA Systems which can be used to
    capture meta data at different points in a business transaction...The business
    process could be a multi hop process...Meta data from one hop to another can usually
    be linked with some attributes and some times the linking algorithm can be complex...
    We are investigating if there are any products which can be used to capture the
    transaction attributes, perform the linking between the meta data at different
    hops and also where we can specify some business rules like if we don't have matching
    data at some hops for a transaction flow to perform some altering function...So
    the product will be doing some transaction monitoring activity...
    If anyone has any information about this kind of software please let me know...
    Thanks
    Surajit

    Hi Ralph,
    We are facing the same issue is our system. I have checked the specified note and observed that few of the systems had to be updated in Managed System Configuration. I have updated the systems. But, the alerts have not stopped.
    Can you please tell me the procedure to resolve this issue?
    Thanks.
    Regards,
    Deepika R

  • Portal monitoring and alerting - Industry standard

    Hi All,
    We wanted to put up alert system for Portal. We have the standard set of alerts set which is being taken care by CCMS, also have the solution manager diagnostics set for portal and other systems. What we want is the client side monitoring which could be http response time and if it exceeds the threshold will alert us. Remember the alerting is major criteria here else the monitoring can be performed by diagnostics which we are doing on regular basis.
    Is there a indusrty standard available for portal for such alerts? I am currently analysing 2/3 other products for the same. I want to take an advise from you all that what product is being used at your end and what are the benefits over Solman and CCMS.
    Please let me know.
    Regrdas,
    Pankaj

    Hello Pankaj
    You might want to look into EEM (End-user Experience Monitoring) for SAP Solution Manager which has lots of information available (demo, video) on SAP SDN on the following URL:
    [http://wiki.sdn.sap.com/wiki/display/EEM/Home]
    In short it enables you to record actions of end-users and then monitor those actions (response times and so on) of what your users normally perform during daily tasks and by doing that getting the technical view on what users are experiencing to be slow.
    Kind regards
    Tom

  • Monitoring and Alerting from Essbase Admin Console.

    Hi Gurus,
    We are running a calculation scripts in Essbase 11.1.1.1 about 4 times a day. Sometime this scripts just failed or take too much time. Is there any machanisim/configuration in EAS that when scripts fails then the admin or users can get message?
    Thanks
    -Samar-

    Hi Samar,
    EAS is not going to give you this. However there are some tools that will.
    Accelatis Ascension Suite will provide a complete range capabilities to address what you require and much more. It will monitor your logs, track events you define, and take action(send email, kill process, etc) on failure or success.
    If you want to go the free route, I think the first step is to take a look at jRightLog. It provides log tailing and parsing into a format where you can then store the data in a database somewhere for later analysis. Once you get the data in the database, you create a server to monitor it and provide feedback as it does.
    http://code.google.com/p/jrightlog/
    Robb

  • Use Infrastructure Navigator to map out applications on different VLANs

    Hello.  I will be trying out Infrastructure Navigator in our environment and I'm wondering how I would go about mapping out applications across our different VLANs.  We have certain networks presented to certain clusters.  Will I need to have a Navigator appliance in each network segment or will I be able to tell Navigator to look at all of the networks across the clusters?
    Thanks for any information you can provide.

    Hello CHJamey,
    I just saw your post and I'd like to try to help. 
    As long as all the VLAN's are known objects in the vSphere, the VIN shouldn't have any issues with mapping out which VMs are communicating with other VMs. 
    You mentioned applications, could you perhaps be a little more specific?  Did you mean Automatic Applications, Manual Applications, or the applications running inside the VMs?
    -Michael.

  • Alert Monitor Threshold and Information, Warning and Alerts

    Hi,
    I defined a Forecast Alert Profile that is supposed to display the MAPE Alert in the Alert Monitor when the MAPE for the said selection is > x %. This x as I understand is maintained in the Diagnosis group of the Master Forecast Profile.
    I now try to make use of this Threshold Value Description "Variance is > %. and define  >(x-10) % but less than x % as information, x % as warning and >(x +20) as error but I am unable to make out how the alerts are determined and whether these values are indeed read (threshold >)
    Secondly my Alert may have been originally based on particular selection(s)- some in FG, some in BG. Some of these selections may not be assigned to the Alert Profile and the Planner may not remember at what level the forecast was carried out to begin with. So my query is at what level of selection is the Alert generated when there is no selection assigned to the Alert Profile ?
    Thanks
    Amit

    Hi,  I was hoping someone answers. It was not a profound question I believe
    I am also curious to know the same with respect SDP Macro based alerts. When a Macro Alert is triggered at Cell Val > y % and it is called a "warning" per the macro definition, of what good is the information, warning and alert threshold values in the Alert Monitor ?
    Does it mean the value 'Y' that I defined in macro step as 'threshold' for alert or process message can be more 'freely' defined in the alert monitor with three distinct values ? I tried testing but I am unable to conclude.
    Please help me understand
    Thanks
    Amit

  • Setting monitoring and SLA Alerts via Workspace studio

    Hi,
    Is it possible to set monitoring and SLA Alert rules via workspace studio. If yes, could you please help me how to do it.
    Thanks
    James

    Hi..
    Operational settings such as enabled, tracing, monitoring etc are easily set within eclipse by editing with the text editor rather than the proxy editor..
    The SLA Alerts are possible to modify in the same way, but they're a bit more tricky to figure out..
    ..Mark.

  • What do you use to monitoring the IDs and Alerts?

    I have installed a 4250 and built out some custom signatures got the email working from VMS 2.2 for some of high priority alerts. This all great but I was wondering what other people use to monitor the alerts and how they get notifications. I see what I have as being very limited in scope and there are a number of parts in VMS that just do not work.
    Do you use other console products? I have seen a couple of applications advertised that say they aggregate alerts from the pix, ids and mcaffee. Just wondering if or what others use. I only have one ids but I do have other items pix, mcaffee.

    I wish I could but I can't offer up anything that won't come at a cost.
    The original poster in this thread alluded to solutions capable of looking at disperate data in one console. That’s a Security Information Management System (SIMS), pure and simple. Cisco sells one, as do many other vendors. The unfortunate thing is that there is no inexpensive SIMS solution out there that offers multi-product monitoring. They all come at a significant price point.
    Since you both have a single sensor, I agree that VMS Basic is more than you need. The hiccups with it far outweigh the benefits. IEV might be "uncomfortable" to use but it works. In my experience (in a single-sensor monitoring environment), using IEV for monitoring and IDM for configuration management is the easiest, if not the most eloquent, solution.
    If you want fancy visualization or reporting, you're going to have to be willing to plunk down some cash to buy it. With a single IDS sensor, it's just not economically viable IMHO.
    I hope this helps,
    Alex Arndt

  • Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated

    Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated for that.
    If this is not possible in SCOM. Is there another way we can do it via power shell or any thing.
    Gautam.75801

    Hi,
    We may need to create script based rule using PowerShell or VBScript.
    Please go through the below links for command get-mailboxstatistics:
    Exchange 2010 : http://community.spiceworks.com/topic/122241-scripting-to-count-all-of-the-messages-in-a-mailbox
    Regards, Yan Li

Maybe you are looking for

  • HP Color Laserjet 2500 colors problem

    Helloo!  I have a problem with my HP Color Laserjet 2500. I use Windows 7 proffesional 32-bit computer. Installed driver from hp support, because the CD that came with the printer, is only for XP/ 2000 /ME etc. I tried both, the PC5 and PC6 driver, a

  • FB 4.7 Greyed out menus / Mac OS X 10.9 preview 6

    Hey everyone, has any one ever seen this before? All toolbar menus are greyed out no matter what is in focus in the main application window. Any ideas?

  • Back up pictures PHOTOS APP

    Hello everyone, So far I haven't had any problem with the"new" Photos App from OS X Yosemite  10.10.3 My only question is  how to back up my pictures and videos from this app? I have read articles about hot to back it up on iCloud and other apple res

  • Changing cd drive on G4 quicksilver

    I wanted to upgrade to a DVD burner on my G4, I have seen a couple of places on the net that say just to take the cables from the CD drive and remove 2 screws. Last night when I was trying this, I removed 4 and the drive still doesn't want to come ou

  • Need help with X-Fi XtremeGamer (Sound proble

    Hey all i have an issue with my X-Fi XtremeGamer?, Today i wanted to start Broadcasting games on the internet using webcam max+ a site called JTV, I get 2 options of sound to pick Mic, Are Digital-in so i pick Digital-in since i want sound from my ga