Ingo - How to have 2 RKFs in Webi on same characterstic

Hello,
I am trying to develope 2 restricted key figures in Universe. I follwed the white paper given by Ingo.
I better explain with example;
1. Created a 'Measure1' and wrote MDX in properties with a prompt on 'Doc Type'.
And when I run the Webi, the prompt pops up and I choose a doc. type 'S1'.
Beautiful the webi report works
2. Created a second 'Measure2' and wrote MDX in properties with a prompt on 'Doc Type'
An when I run the webi, both prompts pop up i.e., 1)Prompt 1 for Doc Type in which I choose 'S1' and 2)Prompt 2 for Doc Type in which I now choose 'S2'.
Now, when I run Webi, the report doesn't show up any results
I think this is happening because it's writing an AND condition for doc. types S1 and S2. Obviously it returns no records.
I want the query to apply S1 and S2 only on each key figure(measure) not at the query level. This way I can show S1 related key figure values in one column, and S2 related key figure data in another column.
Help Please

Hi,
- this looks like a duplicate so I would suggest you close this one
- this is a community and you should not adress your questions to a single person
Ingo

Similar Messages

How to have Safari links always open in same window

I've been researching how to have Safari always open links in the same window, but it appears this can't be done? I've seen this third party app, but am afraid of installing something that doesn't come from the app store because it might harm my macbook. Does anyone have any thoughts about how to have links always open in the same window? Or how to find out if I can trust this app:
http://canisbos.com/linkthing

You can reset the folio by triple tapping the title in the nav bar.
Bob

How to have more than one condition on same column --- using SQL Loader

Hi All,
I am stuck with SQL Loader..
How do I filter records before loading in the table using when clause..
i should load data only when
field1 = 'AC' or 'VC'
field2 is NULL
i used various combinations in when clause like
a) when field1='AC' or field1='VC' and field2 = BLANKS
b) when (field1='AC') and (field2 = BLANKS )
& similar...
In all the cases I tried I could not implement OR condition with field1 and null condition with field2
but my main concern is can we use OR or IS NULL things in when clause of SQL Loader..
is it possible to check this anywhere??
any alternate solution u could suggest??
Thanks
Dikshit

Ok I'll try that, although I did try it earlier when I had iTunes 5.xx loaded, I think.
As to size of playlists, I have a master (900 songs) that defines what will fit onto the ipod , I then generate all the others as subsets of the master (not of the library)- hence I know they will all fit
Can you also clarify something for me: the dialogue box we are discussing is intended, I think, so that one can set the automatic synching of certain playlists between the PC & the ipod. Is that the only way one can select other playlists to go to the ipod - i.e. as static once-offs, not synchronised ?
Apple' docs, I think, are poor in this regard - they assume most ipods are bigger then the users song library and they gloss over the details of this alternate mode of playlist synching.
Thanks - Nick

How to have two seperate Itunes on the same computer for two Ipods?

Is there a way to have two separate Itunes downloaded on the same computer for two different Ipods? My sister got a new Ipod and she wants to hook it up to the computer but when ever she does it just pulls up my Itunes and has all of my songs on there. How can we each have our own Itunes?

There's many ways to accomplish this. You could create two accounts in Windows. That way everything is completely separate. Or, you could manually manage your music in iTunes -- this way it won't automatically sync your music onto her iPod. More info here:
http://docs.info.apple.com/article.html?artnum=61148
http://docs.info.apple.com/article.html?artnum=93779

Moving images from one library to another; or how to have 2 libraries open at the same time in Aperture 2

This may be something easy but for some reason I am having a hard time figuring this out. Basically this is the situation: I have a library on my MBP hd that I import pictures to when I am not hooked up to my external hd for the time being. The main library is of course on the external 2tb drive. How do I have 2 libraries open so that I can essentially drag and drop the pictures from one library to another? It would basically be like moving files from one project to another. Thanks for any help!

Always keep a backup of your original images, before you delete them. I make a backup right form the card, before I even import them to Aperture.
How are your images stored right now? Are the referenced or managed? On your big volume I'd consolidate the newly imported images, to be sure they are really inside the Aperture library before I delete any images outside the library.
but they have the little yellow triangle caution symbol on them and I can see them but not really edit them
That is a very typical problem, when you imported your images as referenced images then somehow delete or move the original master image files, that are stored outside the Aperture library.
Do you still have the original masters of the images with the yellow triangle that you cannot edit? In Aperture 3 you can point Aperture to the location of the master image file "File >Locate referenced image" - probably Aperture 2 has a similar command to let you reconnect your masters, if you still have them. Look into the manual.

Good morning, anyone know how to have 2 tracks zoomed at the same time?

Thanks!

Manually; if you mouse over the extreme left bottom corner (see small spotlights in pic) of any *track header*, a pointing hand cursor will appear, clickhold it and drag up or down for *Individual Track Zoom*.
(also try Commandclicking and Shiftclicking the ITZ-spot)
regards, Erik.

Sorry if tis is naive. I have just bought my first iPad Retina Display. I have WiFi at home but it has taken ages for me to connect as I needed all sorts of codes, passwords, detauils etc. How does one connect to the web (Google) when one is out and a

Sorry if this is a bit naive. I have just bought my first iPad (Retina Display). I have WiFi at home but it has taken me ages to get on-line as I needed all sorts of codes, passwords, numbers etc.
How does one connect to the web (Google) when one is out and about?
Thanks

haha, You're welcome
Maybe these links will be useful
ipad manual/user guide
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
ipad support page
http://www.apple.com/support/ipad/
ipad assistant
http://www.apple.com/support/ipad/assistant/

How many listen we have for creative suits Web-design? because i don't know how to install on my new pc! thank you for the answer!

How many listen we have for creative suits Web-design? because i don't know how to install on my new pc! thank you for the answer!

This is not a photography question. It is an application specific question, Please post in the Photoshop forum.
Photoshop General Discussion
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.

How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA.

How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA. I have another tool that puts data into HANA, So don't want to reload this new data into Lumira every time I want to run a report.
so do i have the ability to create polished ad hoc dashboards, reports, infographics and storyboards Apart from Ad-Hoc reports, I also need a dashboard with some fixed reports that update with the live data.
So please suggest me to accomplish this task.
Thanks and regards
Shashi kiran

Please have a look at Ludek's document here which contains links: SAP Lumira Family Supported Versions Matrix
Ludek has also attached the PAM's as zipped files; Lumira comes in many flavors so I encourage you to research options
Also see this "HANA Live" document: [SAP HANA Academy] Visualized: Lumira & HANA

I have Mac OSX maxmini; Safari states "can't open server since starting with 'open-help-anchor'. How do I get into the web site this is blocking?

I have Mac Mini OSX 10.6.2; Safari states "can't open server since url starting with 'open-help-anchor'. I didn't type this but possibly I was hijacked but it only occurs on the specific banking site I'm trying to get into. How do I get into the web site I've always been able to get but now this is blocking it? Is this related to cookies?

https://discussions.apple.com/message/25085868#25085868
I started a thread in safari maverics, I ment to put it in iOS Safari. New Thread lists all the steps I've taken. No I haven't tried another browser. I've only ever used Safari on my iDevices.

Hi there, I couldn't find out on the Adobe site, how much an upgrade to include web commerce through Business catalyst is? (I have a standard design cloud membership. Help pls...:-)

Hi there, I couldn't find out on the Adobe site, how much an upgrade to include web commerce through Business catalyst is? (I have a standard design cloud membership. Help pls...:-)

Hi
You can check the BC pricing here
US Yearly Pricing | Adobe Business Catalyst

How can a customer edit a web page that I have made?

How can a customer edit a web page that I have made? The customer should edit the text or pictures by himself. Is this possible?

First you can search in this forum "in browser editing".
Second you may be interested in this video:
http://tv.adobe.com/de/watch/designtools-in-der-creative-cloud/bearbeitung-im-browser-in-a dobe-muse/

Lost my Popular Folder from my Favorites Bar in Safari; have a full backup on time capsule; How do I restore those needed web addresses?

Lost my Popular Folder from my Favorites Bar in Safari; have a full backup on time capsule; How do I restore those needed web addresses?

Daniel ..
Try this discussion > Restoring bookmarks from time machine

How to have a live feed from application server log file (realtime viewr )

how to have a live feed from application server log file (realtime viewr for apps log files)
hi , thank you for reading my post.
is there any way to have a live feed of Application server log ?
for example is there any application that can watch the log file and show the changes as new log items come in ?
can some one with more experience help ?

Your question would be more suited to the Developer Forums
http://devforums.apple.com
but anyway...
My goal is to develop a web application that is able to run on iPhone too, to capture the audio and video content from its camera and mic.
Web Apps running in Safari don't have access to the camera or mic hardware.
Or I should built a native application distributed through Apple store?
That is your only option, although such a system already exists:
http://itunes.apple.com/us/app/ustream-live-broadcaster/id319362690?mt=8

How do I get my bridge web gallery to actually work in my photoshop website

Hi
Can anyone explain to me in simple english (please - as I'm just a learner) how I get my web gallery (created in bridge) to work with my photoshop website.
This is what I have done so far:-
(1) I've created my root folder called 'test'. It has 3 subfolders called:-
- 'page1' (which is my homepage created as said below)
- 'page2-gallery' (where I want my bridge web gallery to be)
- 'page3-other' (for another page link - not important here).
(2) I have also created a simple website in photoshop (my homepage said above), using the slice tool and have saved it by saveforweb. So I now have my html website file and which works when tested online. One of the slice segments is for my 'gallery' icon on the homepage which, when clicked, should go directly to my bridge web gallery created.
(3) I have also created a web gallery in bridge and I saved it applying the 'savelocation' as being in page2 of my root folder. But when I checked it online the 'gallery' icon on my homepage does nothing. I then tried saving the gallery to my root folder instead (i.e. not in the page2 of my root folder) but with zero results.
(4) I've then dragged the root folder's html file (my website's homepage) into dreamweaver, clicked the 'gallery' icon and tried to apply the page2 of my root folder file to the properties inspector's link box (bottom of dreamweaver workspace) - but this wouldn't work either.
I know that I must be close to solving this riddle and so can anyone help me please.
J in London, UK

http://forums.adobe.com/community/photoshop
http://forums.adobe.com/community/bridge
http://forums.adobe.com/community/dreamweaver
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Ingo - How to have 2 RKFs in Webi on same characterstic

Similar Messages

Maybe you are looking for