Inherit and POSIX buttons disabled for AFP

When I go in the protocols Pane of the Workgroup Manager, the settings for AFP won't let me chose between POSIX or Inherit behaviour. The buttons are disabled.
The Windows setting let me do this though.
How can I get control back over those buttons and the Inherit behaviour?

Hi
If the Server is 10.4/x disable ACLs on the Volume. WGM > Share Points > All and select the volume, next select General and untick 'Enable ACLs for this volume'. If the Server is 10.5 you have to use the command line:
sudo fsaclctl -p path -d disable
Regardless of which server version it is whenever you disable/enable ACLs always restart the server afterwards.
Hope this helps, Tony

Similar Messages

  • HT4061 My Child has disabled my ipad mini...It ran out of charge and now is disabled for 22928370 minutes, what can I do as I cant get onto the ipad to get the serial number to speak to an advisor and its only 10 months old. HELP!

    Please help me....
    My Child has disabled my ipad mini...It ran out of charge and now is disabled for 22928370 minutes, what can I do as I cant get onto the ipad to get the serial number to speak to an advisor and its only 10 months old. HELP!

    Hello Jesslocko,
    Before following the iPad Restore process make sure you have updated version of iTunes installed on your computer, to check that Open iTunes on your computer click on Help and then check for updates ( If there is any updates available then Install it ) and If you do not have iTunes Installed or if you want to directly update the version of your iTunes then Download and Install iTunes from here : http://www.apple.com/itunes/download/
    1. Make sure your device (iPad) is unplugged (Disconnected) from your computer (this should be the computer that you use to sync your iPad or you can use any other computer with iTunes installed in it). You can leave the USB cable connected to your iPad though.
    2. Turn off your iPad. Press and hold the power button on the top edge until a slider appears. Slide it from left to right to power off your device. If the slider doesn't appear (because your iOS device has frozen up) then hold the power and Home buttons down until the iPhone or iPad turns off.
    3. Ensure your device has a decent amount of charge. Leave it plugged in to the mains for 10 minutes or so if you see the flat battery icon. (iPad low battery)
    4. Hold down the Home button (the round button at the bottom of your iPad screen) and connect the other end of USB cable to the computer this should cause your iPhone or iPad to turn on. Keep holding the Home button until you see the iTunes and USB cable images on your iPad screen, then release the button.(iPad recovery mode)
    5. In iTunes (launch the application if it isn't running on your Computer), you should see a message saying an iPad has been found in recovery mode.
    6. Click OK and then click on Restore to bring your iPad to Factory settings

  • My iPad from school is locked, I haven't yet synced it with my laptop and it is disabled for an hour and there is definately a number 7 in it....HELP!!!

    My iPad from school is locked, I haven't yet synced it with my laptop and it is disabled for an hour and there is definately a number 7 in it....HELP!!!

    Sorry, no one here can help you remember your passcode.

  • Delete and Junk Buttons Disabled

    I noticed today that the "Delete" and "Junk" buttons in Mail's toolbar have become disabled ("grayed out"), even with a highlighted message in the message list pane. (I use a "three-pane" configuration, if that matters.) All the other buttons (Reply, Reply All, Forward, New Message, Get Mail, Note, and To Do) work fine.
    If I open a message into its own window, those buttons are active.
    All buttons work fine on another computer running the same OS version. I haven't installed any updates in the last few days.
    Does anyone have any ideas about what might be going on or how I could fix it? Thanks for any ideas.

    This is strange. With only a reboot (no updates applied), those buttons are now working again.

  • CCM 2.0 Approve and Reject buttons disabled

    Hi!!!
    We log into de CAT with the Catalog Approver User. And when we go to the Procurement Catalog, the approve and reject buttons are disabled.
    The procurement Catalog has the status To Be Approved (we defined it in the spro), so the items that I mapped from the Supplier to the Mater and to the Master to the Procurement catalog have this status.
    I loged in to the Procurement Catalog with the Catalog Manager and assigned the approver to the catalog (CCM_APROVER). And this user has the role of approver (we have double checked in the pfcg).
    Any idea why the buttons are disabled?
    THANKS IN ADVANCED!!!!

    Hi Jay, Hay Nimish,
    First of all, thanks for reply.
    I think that we have found the problem. Is in relation to the transaction SICF. But we won't be able to check it until monday.
    If the SICF solution doesn't work I will get back to you.
    Thanks once again!
    Message was edited by: Patricia Mussons

  • Chart - PREVIEW and SAVE buttons disabled.

    I am using BI Publisher Desktop with WORD 2007 on VISTA. When I attempt to add a chart to a rtf template, the PREVIEW and SAVE buttons are disabled. I can move data fields from the Data section into the Layout Section, select chart type, even the style. Everything appears to work just fine but I can not preview or save. The template file is not in any restricted folder. I can add a table, then save and preview the document just fine.
    I have even openned some of the samples that came with the download and when I view the properties on an existing chart, I see the same disabled buttons.

    Which menu path are you using?
    Are the items available for personalization?

  • Dropdowns and many buttons disabled in PWA 2007 after Microsoft Project Professional 2010 has been installed

    Hi Team,
    I have Microsoft Project professional 2007 installed and also using PWA for 2007.
    I recently installed Microsoft Project Professional 2010, and since the time i installed 2010 all the button in PWA 2007 have been disabled.
    1. I could not select a project from "Project Center"
    2. I could not select resources from "Manage Resources"
    3. I could not select dropdowns in the project properties even if the project is selected.
    ALl the other team members are able to use both without any issues.
    I also uninstalled IE8 browser and re-installed, that didn't help.
    I could use PWA normally after 2010 is uninstalled.
    Please suggest a solution for this.

    Try running a repair on Project Professional 2007. You always have to do this after installing a newer version of project. Always run a repair on the previous version. What's happening is that PWA is not seeing 2007 on your machine because 2010 overwrote
    some of the shared objects.
    Gary Chefetz, MCITP, MCP, MVP msProjectExperts
    Project and Project ServerFAQs
    Project Server Help BLOG

  • JFileChooser "List" and "Details" button disabled.

    Hi,
    The two buttons "List" and "Details" buttons on the top-right of my JFileChooser dialog box are both disabled.
    Dose anyone know how to enable them?
    Thanks
    slam

    Here's a solution. I still think there should be a more official way of doing this.
    public MyFileView(JFileChooser chooser)
              for ( Component c : chooser.getComponents())
                   if (c.getClass() == FilePane.class)
                        filePane = (FilePane) c;
         @Override
         public String getName(File f)
              if (filePane.getViewType() == FilePane.VIEWTYPE_DETAILS){
                   return "Long";
              return null;
         }

  • Share button disabled for I cloud

    Share button disabled on I cloud. Can't share video in message.

    Ellen...
    Try resetting the iPad then try again.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    Apple - iCloud - Learn how to set up iCloud on all your devices

  • "Accept and Submit" button disabled

    I am trying to applying for Adobe Runtimes / Reader Distribution License Agreement but the "Accept and Submit" button is disabled on https://www.adobe.com/cfusion/mmform/index.cfm?name=distribution_form. I have tried everthing I could but unable to proceed. Please help. Thanks.

    One more thing: Since I did not have Safari installed on my office computer on which I was facing the problem, I tried at home on my home computer using Safari which worked. So, I do not know if the problem was with web browser only. It is also possible that on my home computer, I might have had another version of Java and/or different settings.

  • How to diable only one field enabled and other fields disabled for one user group?

    Hi,
    I have a form contains many fields. A group of users can add items using that form.
    As per the user requirement I have created a filtered view and that filtered view can be seen by some other sharepoint user group but as per their further requirement the new sharepoint user group is only allowed to update Remarks field. All other fields
    should be disabled for them.
    In my idea, I have to create multiple forms and in one of it except Remarks field all should be disabled but I am unable to assign multiple forms to a single list.
    Or how to make Remarks field enable to this user group and for other admin user group all fields could be enabled.
    Hope I have expressed my question correctly.
    Any solution would be appreciated.

    There is no Out of the Box way to set permissions on each column, primarily due to the performance impact. The following thread provides some options,
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c0794232-9bab-4cea-91d8-f311a793a863/how-to-set-column-wise-permission-in-sharepint-list-in-sharepoint-2010?forum=sharepointadminprevious
    Dimitri Ayrapetov (MCSE: SharePoint)

  • A1 - Menu, Home and Back buttons disabled???

    Hi, I restored my system to the original factory settings on my Lenovo A1, and now front buttons (menu, home and back) are disabled. Is there any way to enable/disable front buttons???
    Thanks

    Are you through the setup phase following the reset?  Did that seem to go normally?
    If you haven't powered the device completely off and rebooted it, do so.  If that doesn't fix the problem, try resetting the device again.

  • HT4623 My IPhone 4 will not turn on. I've tried resetting by holding the lock and home buttons down for 2 minutes but no luck.

    My Iphone 4 will not turn on. I have tried resetting it by holding down the lock and home buttons but no luck. I do not know how to reset it and it is only about 3 months old. Need help.

    You might get more responses if you asked your question in the iPhone section.  This section is devoted to iPad problems.

  • Add Approver button disabled for PO in sap srm when GR and IR are already posted

    Hello Gurus,
         One of my user has edited an old PO for which the GR and IR has already been posted in backend. Now the reason for editing was to change the expected value for 3 item and he changed the value the approver is still blank as for old PO's there was no approval required but later on the whole scenario changed and based on total value the approvers are decided now. But for this PO still its not showing the appovers and also the add approver button is disabled. Is there any way to enable the Add approver button. Also please let me know whether addition of approver is allowed after the GR and IR are posted in backend.
    Thanks
    Gaurav Gautam

    Solved.
    In Control Actions -> Configure Control of Actions on Header Level, it's not neccessary put the subtype equal to 0.

  • Purchase Order Personal settings push button disable for particular user

    Hi
    I want to disable the acess to personal settings push button in purshase order creation (ME21N )..for selected user is it possible
    could any one help me in this issue
    Regards
    GS

    Hi
    I think transaction variant will help you check with abaper
    f you want to hide unwanted screens and fields in any standard SAP program without changing it, the use of the Transaction Variant is the best solution.
    check following link you may get some idea
    [http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
    [http://www.****************/Tutorials/ABAP/TransactionVariant/Create.htm]
    Regards
    Kailas Ugale

Maybe you are looking for

  • My Applications keep Freezing - Brand New Mid-2010 iMac.  Please Help

    Hello - I am extremely frustrated because I just received my brand new iMac in the mail (27" i7 2.93GHZ / 2 TB HD / 4GB 2x2 SDRAM) and my applications keep freezing. Let me give an example - I keep trying to open iPhoto so that I can import and expor

  • Mac Printing Pics Too Dark

    Weird and Complex. Document in Word (for Mac) using images from internet (jpg, png, monochrome and colour - from various NASA, JPL and other sources).  Printing Word .docx is fine.  Export document to PDF (using in-built Mac OS X PDF Print system) an

  • Small method probrem

    Hi i'm rather new on Java, and i got a small problem with methods: class Metodus1 {   byte life;   String status;   void fight() {     if (life <= 0) {       status = "You're dead";       System.out.println(status + "");     else {       status = "Yo

  • Unable to open Smart Objects

    Hi, everytime I try opening smart objects I recieve the following error: 'Could not edit original smart object because of a program error' Installed CC yesterday, working on a mac osx 10.9.2 Can't seem to find any resolve through the forums, any help

  • System.out.println in EJB

    Hi I have given System.out.println in my EJB object. But I am not able to see the output in my console. But when I give printStackTrace in my JSP(from where I can EJB)....it is displaying the exception.... So my question is Can we give System.out...