Inherit Permissions - Odd behavior-need explanation
I am a site/subsite owner with no rights at the site collection level. While creating a new subsite, I accidently removed most groups from site permissions for the top level site I control. As sometimes happens, rather than taking a few minutes
to breathe, I thought to reverse my mistake by clicking on the Inherit Permissions button on the top level I own. The permissions were then the same as the site collection level.
Below my top level site, called "TOP", I have 10 subsites which had unique permissions. Inheritance has long been broken from TOP and there are also hundreds of unique library and list group assignments (these were not inheriting either).
When I clicked that button on TOP, not only did TOP revert to collection permissions, every subsite, every library and list, reverted to the permissions granted at the site collection level as well except for 2 subsites where I did not have access. (lots
of repair work to be done now) 3 custom permission levels, 2 of which I did NOT create, disappeared.
My understanding of breaking inheritance is that once broken, changes made above the break will not flow down. I would think that clicking on Inherit Permissions on the site above the break would have the same effect. The reversion would stop where inheritance
was already broken.
Is my understanding incorrect or did we have some type of issue behind the scenes that caused this to happen?
Thanks!
Fadi,
I'm not sure if your "yes" means I am incorrect or that we have something corrupted.
I would like to add that along with the complete re-inherit and permissions removal waterfall effect throughout the multiple subsites, libraries and lists, custom permission levels were deleted. We had 3 custom permission levels, 2 of which the farm
administrator had done and 1 of which was done by me. When I discovered they were gone, I went to add them back and found that my top level site was locked in an inherit state for permission levels and was not able to add or change any levels. Nor can
the farm administrator.
Anyone else who could contribute to this thread? We're trying to find root cause and I'd like to get a definitive statement as to whether or not selecting Inherit Permissions from the top site level should cause all subsites/lists/libraries/bascially
everything with unique permissions up to 6 layers down to inherit from the site collection again.
Thanks for your input!!!
marilou Borries
Similar Messages
-
MRP weird behavior - need explanation
Dear all,
I have a question about the MRP run and creation of proposals
When I run MD01, and even if there are requirements, no proposals (PRs,Planned Orders) are created.
However, when I run MD02 (FG specific), proposals (PRs, Planned Orders) are now created.
This is an issue in our implementation, because MRP run is done via background and users will no have time to run MD02 for each FG.
The parameters i use for both tcodes are:
NETCH
1
3
1
2
2Thanks for the answer!
I read the link and they were very helpful.
A few questions:
1.Should I schedule MDAB and MDRE once, or shoudl I schedule it periodically?
2. For my background job for the MRP (everday run), should key be NEUPL or NETCH?
>
Mangalraj.S wrote:
> Dear Bear,
>
> Check this,Use T Code MDAB and MDRE and schedule a job for both these T Codes for setting up the planning file entries and
>
> checking the planning file consistency and when MRP is run at plant levelfor the first time ,its advisable to run with NEUPL and
>
> then with NETPL.
>
> Also refer this thread,
>
> PLANNED NOT CONVERTING TO PURCHASE REQUISITION AUTOMATICALLY
>
> Check once with this and revert
>
> Regards
> S Mangalraj -
"Inherit Permissions From Parent" doesn't work
In OS X 10.5 server, selecting the option for an AFP share to inherit permissions from its parent does not work for users on OS X 10.3. All files created by users running 10.3 have 755 permissions, regardless of the parent folders permissions.
Clearly, this rather dramatically reduces the utility of AFP in 10.5 Server for anyone with users running OS X 10.3.
OS X 10.3 server did not have this problem.
Manually propagating permissions is futile for two reasons. First, the needed set of nested permissions is complex enough that propagating them manually would take hours, and secondly there would be intervals between the propagations when documents would not be accessible to the right people.
Consider a drastically simplified example:
Imagine a share named "Share" with a folders inside it named Admin. Inside the Admin folder might be two additional folders named Accounting and Personnel. Inside Personnel there are folders named Performance Review and Forms. It would look like this:
Share
-- Admin
----- Accounting
----- Personnel
-------- Performance Review
-------- Forms
Now consider several groups: Employees, Accounting, HumanResources
Employees should have read write access to Share, and everything under it unless more restrictive permissions are explicitly created. Only the Accounting group has access to Accounting, and everything in Accounting should only be accessible to Accounting. Performance Reviews should only be accessible to the HumanResources group, but Forms should be accessible to all Employees.
Now a member of the employees group saves a new file in the Forms folder, but the group doesn't have, and needs, read/write privileges. To fix this the permissions from Share can't be propagated to all the files and folders inside it because that would nuke the special privileges for Performance Reviews and Accounting.
It might be conceivable that every n minutes a script could run that would recurse, depth first postorder, through the hierarchy assigning all files in each folder the permissions of the enclosing folder, but there are at least two problems with that. First, it would be slow and between runs the files wouldn't have the right permissions. Second, sometimes we might want a file to have special explicitly specified permissions that differ from the parent, but it would be terribly cumbersome to specify the exceptions for this sort of script.
POSIX behavior also doesn't solve the problem because it will set the same permissions as we're seeing already, there's no obvious way to change the default permissions, and doing so would have security implications elsewhere on the server if that "umask"ish setting couldn't be specified exclusively for the share.
Inherited permissions would solve the problem, and have solved the problem under past versions of OS X server, but they don't work on 10.5 with 10.3 clients.
Does anyone know of a workaround or have any additional details?glad someone else is experiencing this, I'm having the same problem with inherit from parent.
I was going to start using inherit because Leopard has ruined ACL's, Leopard clients don't honour the deny delete subfolders and files ACE, basically the leopard permissions systems seem to be flawed -
Issues Exiting Sleep Mode and Odd Behavior On Restart with GPU
I'm running a completely stock HP P7-1240 desktop except for an EVGA GeForce GTX 750 TI SC GPU. The GPU runs fine when the computer is up and running (which is odd because the forums have several other threads mentioning that the 700 series should be incompatible with my BIOS).
However, there are two main strange problems that have arisen since installing the GPU. One is that, whenever the computer enters sleep mode, it refuses to wake back up properly. It seems to me that the computer activates but does not send any signals out from the back panel (at the very least, no video signal because my monitors stay blank). On a rare occasion, it will wake back up properly, but at least 90% of the time, it needs to be restarted. Upon restart, sometimes the same issue occurs (no video output), and the computer needs to be restarted a second time before it will boot up again.
This leads to the second problem. When starting, the computer goes to a black screen listing basic computer specs (see attached photo. At this screen, the computer does not respond to any input. It proceeds to beep 3 times, all the same length and pitch spaced about 30 seconds apart. After the third beep, the screen goes black and then the computer boots up normally with no further odd behavior.
Without the GPU, none of these issues happen. At the very least, not regularly.
I have seen another thread mentioning that, although the HP support page for my desktop does not list it, there is a BIOS update for my motherboard that has fixed issues relating to more modern GPU's. By nature of it being a BIOS update that does not (appear to) officially support Windows 7, I'm hesitant to move forward with that potential solution.
Although I'm planning to build myself a new computer from scratch at some point, I was hoping to at least get another year out of this machine, if not 2. While this issue doesn't appear to be immediately threatening the stability of the computer, I can't help but think that this is an issue I should iron soon to avoid future issues (not to mention it would save me a fair amount of electricity to be able to enter sleep mode on a regular basis).
Any suggestions would be greatly appreciated!
This question was solved.
View Solution.Hello @johnmwalker,
I understand that you are having some issues with your HP Pavilion p7-1240 Desktop PC waking up from sleep mode. I am not sure how much can be done for the delay on your startup with an OEM BIOS you are limited in what you can do and since your graphic card works I think you would be better off not messing too much with the BIOS at this point. The one thing I would try is going into the BIOS using the HP Support document:BIOS Setup Utility Information and Menu Options, and under Advanced > Power-On Options set POST Messages to Disable and POST Delay (in seconds) to None.
Now the waking from sleep mode issue could just be the hybrid sleep setting causing you an issue with sleep mode. Use the following steps to disable hybrid sleep:
Step 1. Click Start
Step 2. Click Control Panel.
Step 3. Click System and Security
Step 4. Click Power Options
Step 5. Click High Performance from Power Options
Step 6. Click Change plan settings
Step 7. Select Change advanced power settings
Step 8. Click the plus (+) sign next to Sleep
Step 9. Click the plus (+) sign next to Allow hybrid sleep
Step 10. Select Off from the drop-down menu
Step 11. Click OK
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
Odd Behavior with Multi-page Forums
I have observed an odd behavior, when navigating multi-page forums.
As an example, I use the Premiere Elements Tips & Tricks sub-forum often, to link to helpful articles. It is, like most, a multi-page forum.
As the order of the articles will change, as new replies are added, I often need to navigate to multiple pages, to find the one that I need. My bookmark opens that forum onto Page 1, which is normal. I then scroll that page, looking for what I want. If it is not there, I will use either the Next, or the Page 2 buttons to move on. As I have scrolled to the bottom of Page 1, the Next (or Page 2) page will open at the bottom, rather than at the top, the first time that I do this. Pages 3, and above, will always open at the top. Also, if I go back to Page 2, it now opens at the top. I only see this, when going from Page 1, to Page 2, and then, only the first time. Odd, but no deal breaker, as I just manually scroll back to the top of Page 2, and then scroll down, looking for a particular article.
I am on Chrome and Win XP-Pro SP-3. I have not yet tried in IE 7 - my latest version.
Has anyone else experienced this little anomaly?
HuntAdobe-admin,
Sorry, but I am out of "points... "
Thank you for the input. I just found it slightly odd behavior, and all that it means is a bit of scrolling, now that I know what to expect. In most cases, the average user probably does not go to Page 2 of a forum, but many of us do. If it becomes a pain, I'll just jump quickly to Page 3, and then back to Page 2.
Hey, Adobe never promised to make my life perfect - just better... I can easily live with this, but thought I'd ask, in case it was OE on my part.
Appreciated,
Hunt -
Inherit Permissions without server purchase
The issue of not being able to allow me to enable a folder to inherit permissions is a problem. all mac os previous to X would let me do that. Even all windows os will let me do that. I've heard it's for improved security but at this point I would rather have flexibility than security. Since this is the only feature that I need that is on the $499 os x server I don't want to purchase that server for that one little feature that is common in windows and past mac operating systems.I hope future os upgrades will restore this option. Thank You
If anyone knows of a workaround or shareware app that would help. that would be great. ThanksSupposedly this can be done in the CLI using chmod. There's no way to do it in the Finder. I've played around with chmod on this, but haven't had much success yet. I'm still researching it myself.
Does anyone have any better suggestions? Thus far, I'm having trouble finding out exactly how to write the chmod line to do this.
Exactly what I'm dealing with is an OS X 10.5 client machine (NOT a server) on which I want to set up a shared folder. It's a graphics folder on an Active Directory domain. What's happening is when different users modify files in that folder, the permissions get all out of whack, and some people can make edits to some files when others can't. I have to keep going in and have permissions from the root folder inherit down, but that only works that once. I need it set to continually inherit from that root folder so that a particular ground defined in Active Directory will always have read/write access to the files and folders contained within.
I've also read something that said that OS X doesn't support dynamic inheritance, meaning that even if I sets up inheritance on a folder, it only applies to a folder or file is created; but if I change the permissions on the root folder, it won't change anything that currently exists in the files/folders below it. Is this true?
- John -
Odd behavior when using custom Composite/CompositeContext and antialiasing
Hi,
I created a custom Composite/CompositeContext class and when I use it with antialiasing it causes a black bar to appear. I seems it has nothing to do with the compose() code but just that fact that I set my own Composite object. The submitted code will show you what I mean. There are 3 check boxes 1) allows to use the custom Composite object, 2) allows to ignore the compose() code in the CompositeContext and 3) toggles the antialiasing flag in the rendering hints. When the antialiasing flag is set and the Composite object is used the bar appears regardless of if the compose() method is executed or not. If the Composite object is not used the bar goes away.
The Composite/CompositeContext class performs clipping and gradient paint using a Ellipse2D.Float instance.
a) When the Composite is not used the code does a rectangular fill.
b) When the Composite is used it should clip the rectangular fill to only the inside of a circle and do a gradient merge of background color and current color.
c) If the compose() method is ignored then only the background is painted.
d) When antialiasing is turned on the black bar appears, i) if you ignore the compose() method it remains, ii) if you do not use the Composite object the bar disappears (???)
NOTE: the compose method's code is only for illustration purposes, I know that AlphaComposite, clipping and/or Gradient paint can be used to do what the example does. What I am trying to find out is why the fact of simply using my Composite object with antialiasing will cause the odd behavior. Been trying to figure it out but haven't, any help is appreciated.
Thx.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.image.*;
import javax.swing.*;
public class TestCustomComposite2
extends JFrame
implements ActionListener {
private JCheckBox useCompositeChk, useAntialiasingChk, useCompositeContextChk;
private Shape clippingShape = new Ellipse2D.Float(100, 100, 100, 100);
private MergeComposite composite = new MergeComposite();
public TestCustomComposite2() {
super("Test Custom Composite");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JPanel cp = (JPanel) getContentPane();
cp.setLayout(new BorderLayout());
cp.add(new TestCanvas(), BorderLayout.CENTER);
JPanel panel = new JPanel(new FlowLayout(FlowLayout.LEFT, 0, 0));
panel.add(useCompositeChk = new JCheckBox("Use Composite", true));
useCompositeChk.addActionListener(this);
panel.add(useCompositeContextChk = new JCheckBox("Use Composite Context", true));
useCompositeContextChk.addActionListener(this);
panel.add(useAntialiasingChk = new JCheckBox("Use Antialiasing"));
useAntialiasingChk.addActionListener(this);
cp.add(panel, BorderLayout.SOUTH);
pack();
setVisible(true);
public void actionPerformed(ActionEvent evt) {
useCompositeContextChk.setEnabled(useCompositeChk.isSelected());
invalidate();
repaint();
private class TestCanvas
extends JComponent {
public TestCanvas() {
setSize(300, 300);
setPreferredSize(getSize());
public void paint(Graphics gfx) {
Dimension size = getSize();
Graphics2D gfx2D = (Graphics2D) gfx;
gfx2D.setColor(Color.GRAY);
gfx2D.fillRect(0, 0, size.width, size.height);
RenderingHints rh = null;
if(useAntialiasingChk.isSelected()) {
rh = gfx2D.getRenderingHints();
gfx2D.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
Rectangle r = clippingShape.getBounds();
//gfx2D.setColor(Color.GREEN);
//gfx2D.drawRect(r.x, r.y, r.width, r.height);
gfx2D.setColor(Color.YELLOW);
gfx2D.fill(clippingShape);
Composite oldComposite = null;
if(useCompositeChk.isSelected()) {
oldComposite = gfx2D.getComposite();
gfx2D.setComposite(composite);
gfx2D.setColor(Color.ORANGE);
gfx2D.fillRect(r.x, r.y, r.width + 1, r.height + 1);
if(oldComposite != null)
gfx2D.setComposite(oldComposite);
if(rh != null)
gfx2D.setRenderingHints(rh);
public class MergeComposite
implements Composite, CompositeContext {
public CompositeContext createContext(ColorModel srcColorModel,
ColorModel dstColorModel,
RenderingHints hints) {
return this;
public void compose(Raster src,
Raster dstIn,
WritableRaster dstOut) {
if(!useCompositeContextChk.isSelected())
return;
int[] srcPixel = null;
int[] dstPixel = null;
for(int sy = src.getMinY(); sy < src.getMinY() + src.getHeight(); sy++) {
for(int sx = src.getMinX(); sx < src.getMinX() + src.getWidth(); sx++) {
int cx = sx - dstOut.getSampleModelTranslateX();
int cy = sy - dstOut.getSampleModelTranslateY();
if(!clippingShape.contains(cx, cy)) continue;
srcPixel = src.getPixel(sx, sy, srcPixel);
int ox = dstOut.getMinX() + sx - src.getMinX();
int oy = dstOut.getMinY() + sy - src.getMinY();
if(ox < dstOut.getMinX() || ox >= dstOut.getMinX() + dstOut.getWidth()) continue;
if(oy < dstOut.getMinY() || oy >= dstOut.getMinY() + dstOut.getHeight()) continue;
dstPixel = dstIn.getPixel(ox, oy, dstPixel);
float mergeFactor = 1.0f * (cy - 100) / 100;
dstPixel[0] = merge(mergeFactor, srcPixel[0], dstPixel[0]);
dstPixel[1] = merge(mergeFactor, srcPixel[1], dstPixel[1]);
dstPixel[2] = merge(mergeFactor, srcPixel[2], dstPixel[2]);
dstOut.setPixel(ox, oy, dstPixel);
protected int merge(float mergeFactor, int src, int dst) {
return (int) (mergeFactor * src + (1.0f - mergeFactor) * dst);
public void dispose() {
public static void main(String[] args) {
new TestCustomComposite2();
}I got a better version to work as expected. Though there will probably be issues with the transformation to display coordinates as mentioned before. At least figured out some of the kinks of using a custom Composite/CompositeContext object.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.image.*;
import javax.swing.*;
public class TestCustomComposite2
extends JFrame
implements ActionListener {
private JCheckBox useCompositeChk, useAntialiasingChk, useCompositeContextChk;
private Shape clippingShape = new Ellipse2D.Float(100, 100, 100, 100);
private MergeComposite composite = new MergeComposite();
public TestCustomComposite2() {
super("Test Custom Composite");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JPanel cp = (JPanel) getContentPane();
cp.setLayout(new BorderLayout());
cp.add(new TestCanvas(), BorderLayout.CENTER);
JPanel panel = new JPanel(new FlowLayout(FlowLayout.LEFT, 0, 0));
panel.add(useCompositeChk = new JCheckBox("Use Composite", true));
useCompositeChk.addActionListener(this);
panel.add(useCompositeContextChk = new JCheckBox("Use Composite Context", true));
useCompositeContextChk.addActionListener(this);
panel.add(useAntialiasingChk = new JCheckBox("Use Antialiasing"));
useAntialiasingChk.addActionListener(this);
cp.add(panel, BorderLayout.SOUTH);
pack();
setVisible(true);
public void actionPerformed(ActionEvent evt) {
useCompositeContextChk.setEnabled(useCompositeChk.isSelected());
invalidate();
repaint();
private class TestCanvas
extends JComponent {
public TestCanvas() {
setSize(300, 300);
setPreferredSize(getSize());
public void paint(Graphics gfx) {
Dimension size = getSize();
Graphics2D gfx2D = (Graphics2D) gfx;
gfx2D.setColor(Color.GRAY);
gfx2D.fillRect(0, 0, size.width, size.height);
RenderingHints rh = null;
if(useAntialiasingChk.isSelected()) {
rh = gfx2D.getRenderingHints();
gfx2D.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
Rectangle r = clippingShape.getBounds();
//gfx2D.setColor(Color.GREEN);
//gfx2D.drawRect(r.x, r.y, r.width, r.height);
gfx2D.setColor(Color.YELLOW);
gfx2D.fill(clippingShape);
Composite oldComposite = null;
if(useCompositeChk.isSelected()) {
oldComposite = gfx2D.getComposite();
gfx2D.setComposite(composite);
gfx2D.setColor(Color.ORANGE);
gfx2D.fillRect(r.x, r.y, r.width + 1, r.height + 1);
if(oldComposite != null)
gfx2D.setComposite(oldComposite);
if(rh != null)
gfx2D.setRenderingHints(rh);
public class MergeComposite
implements Composite, CompositeContext {
public CompositeContext createContext(ColorModel srcColorModel,
ColorModel dstColorModel,
RenderingHints hints) {
return this;
public void compose(Raster src,
Raster dstIn,
WritableRaster dstOut) {
// dumpRaster("SRC ", src);
// dumpRaster("DSTIN ", dstIn);
// dumpRaster("DSTOUT", dstOut);
// System.out.println();
if(dstIn != dstOut)
dstOut.setDataElements(0, 0, dstIn);
if(!useCompositeContextChk.isSelected())
return;
int[] srcPixel = null;
int[] dstPixel = null;
int w = Math.min(src.getWidth(), dstIn.getWidth());
int h = Math.min(src.getHeight(), dstIn.getHeight());
int xMax = src.getMinX() + w;
int yMax = src.getMinY() + h;
for(int x = src.getMinX(); x < xMax; x++) {
for(int y = src.getMinY(); y < yMax; y++) {
try {
// THIS MIGHT NOT WORK ALL THE TIME
int cx = x - dstIn.getSampleModelTranslateX();
int cy = y - dstIn.getSampleModelTranslateY();
if(!clippingShape.contains(cx, cy)) {
dstPixel = dstIn.getPixel(x, y, dstPixel);
dstOut.setPixel(x, y, dstPixel);
else {
srcPixel = src.getPixel(x, y, srcPixel);
dstPixel = dstIn.getPixel(x, y, dstPixel);
float mergeFactor = 1.0f * (cy - 100) / 100;
dstPixel[0] = merge(mergeFactor, srcPixel[0], dstPixel[0]);
dstPixel[1] = merge(mergeFactor, srcPixel[1], dstPixel[1]);
dstPixel[2] = merge(mergeFactor, srcPixel[2], dstPixel[2]);
dstOut.setPixel(x, y, dstPixel);
catch(Throwable t) {
System.out.println(t.getMessage() + " x=" + x + " y=" + y);
protected int merge(float mergeFactor, int src, int dst) {
return (int) (mergeFactor * src + (1.0f - mergeFactor) * dst);
protected void dumpRaster(String lbl,
Raster raster) {
System.out.print(lbl + ":");
System.out.print(" mx=" + format(raster.getMinX()));
System.out.print(" my=" + format(raster.getMinY()));
System.out.print(" rw=" + format(raster.getWidth()));
System.out.print(" rh=" + format(raster.getHeight()));
System.out.print(" tx=" + format(raster.getSampleModelTranslateX()));
System.out.print(" ty=" + format(raster.getSampleModelTranslateY()));
System.out.print(" sm=" + raster.getSampleModel().getClass().getName());
System.out.println();
protected String format(int value) {
String txt = Integer.toString(value);
while(txt.length() < 4)
txt = " " + txt;
return txt;
public void dispose() {
public static void main(String[] args) {
new TestCustomComposite2();
} -
PLEASE HELP!
My iMac 21" late -09, started acting a bit wierd a year ago. Things got worse rapidly, it got slower, the screen flickers/tears (see link below), short moments of lost internet connection, lost connection whit the keyboard (might be keyboard that is broken), almost overheats when gaming and odd behavior on some webbsites whit galleries and/or videos.
Let's begin whit the screen: it's not vertikal lines or major distortions, just a subtle horisontal line that "wanders" from bottom to topp and some lagging from time to time. Looks like this: http://cl.ly/3i2W2o3S1D2T
The wierd thing is that hi-res does not mean more "tearing". Yes the lagg and risk of tearing increases, but the connection seems to be: lots of movement=tearing. So a pixeld 240p video of people dancing can be way worse than a news debbate in1080p!?!
Lost connection whit internet and keyboard rarely happens and is probably due to something else, but thought that was good to have in mind.
Odd behavior: galleries ex: when browsing images on Facebook in fullscreen, the image sometimes jumps around in the beginning and when clicking on next the same picture might appear again or just nothing at all. When scrolling down overwiewing a gallery, the updating stops and you can't scroll down further. This problem appers mainly on FB, deviantart also acts a bit wierd but there is often small issues whit image sites. Doesn't help to switch browsers either!
Videos: Youtube is horrible to use, stops loading, dosen't start loading, erases everything loaded (grey bar disapears and reloads), refuse to switch ressolution and suddenly stops the video like it was done! "ehh.. wasn't this 2min long? Not anymore, now its 34sec!". Mainly a Youtube problem but many similar sites can be a bit problematic to use.
NO, it's not the HTML-5 problem or any standard flash issue and using a different browser dosen't help!
Worst is the fact that most of these errors are not constant! One day your watching youtube or mabey a movie in VLC, a bit laggy, but almost no problem. Next day **** brakes lose and after 2hours of struggling you are ready to stabb yourself in the face!
What i tried: Most easy buggfixes that might cause the above problems, updating most things, Switched from OS X SL to OS X ML, complete reinstall and some things i probably forgot by now. Then went to MacStore for repair, they didn't find anything wrong and said it worked fine after the standard diagnostic/repair program!?! Went home and everything was the same! Went a second time to MacStore, same result.
So I'v reinstalled a few times and it seems to improve the Mac. But 2-3weeks later every error is back, even if I barely installed or downloaded anything!?!
Any idea what this could be? Or is the graphic card broken and MacStore has a blind, inbred muppet as a technician?No I didn't. The first time i explained the problem thoroughly and thought that they just couldn't miss such a visual error. I was wrong. The second time the technician wasn't there so i showed the above clip to the salesstaff and explained everything onceagain. Later the technician called me and we talked for 10min.
Btw, the problems always "manifests themselves", just varies between strenght and frequence.
But all other issues aside, what could cause the tearing of the screen as seen int the above clip? -
Inherit Permissions option not showing up for AFP shares
Hello,
I am running OS X Server 10.5.8, and I recently noticed that the option to inherit permissions from parent is not showing up under protocol options. I used to see Default permissions for new files and folders, and now that section does not show up.
I have searched around and seen one other post where someone had a similar issue, but the post was not answered.
Thanks,
ScottThanks for the response. I tried the terminal command, and it went through without an error, but inherit permissions are still not working. I tested saving file to this volume and it did not inherit the permissions set through Server Admin.
When I launch server admin, I don't even see the option to configure Inherit Permissions. Is there a global setting somewhere? -
Very odd behavior regarding variable naming with DataService.fill()
I'm experiencing this odd behavior in LCDS 2.5, wich pertains
to variable naming for the objects returned by a DataService.fill()
call. I ceated a simple destination with a Java adapter. the Server
side Java data object is defined as follows)
package test;
public class RepositoryObject
private String m_strObjectId;
private boolean m_bIsValid;
private long m_lSize;
[public setters and getters here]
On Flex side, the ActionScript value object is defined as
follows:
package test
[Bindable]
[RemoteClass(alias="test.RepositoryObject")]
public class RepositoryObject
public var m_strObjectId:String;
public var m_bIsValid:Boolean;
public var m_lSize:Number;
public function RepositoryObject()
The FDS destination definition (in
data-management-config.xml):
<destination id="testDs">
<adapter ref="java-dao" />
<properties>
<source>test.TestDS</source>
<scope>application</scope>
<metadata>
<identity property="m_strObjectId"/>
</metadata>
<network>
<session-timeout>20</session-timeout>
<paging enabled="false" pageSize="10" />
<throttle-inbound policy="ERROR" max-frequency="500"/>
<throttle-outbound policy="REPLACE"
max-frequency="500"/>
</network>
<server>
<fill-method>
<name>getObjects</name>
</fill-method>
</server>
</properties>
</destination>
What I figured while debugging into the client was is the
data returned by the service (I'm using the mx:DataService call)
returns objects whose variable names
do not match my definition:
m_strObjectId becomes objectId
m_lSize becomes size
m_bIsValid becomes isValid
I wonder why that renaming??? Basically "m_str" prefix was
stripped and capital "O" became lower case "o" for my first
variable etc.
For instance, in a datagrid cell renderer I could not
reference the returned value as {data.m_strObjectId}, but if I use
{data.objectId}, it works.
Any ideas why this behavior (which I found confusing and odd)
would be greately appreciated.
RobertThe latter, as "getM_strObjectId " is an ugly name... don't
tell me that causes issue...ok kidding, I got you. The
setter/getter names are important in this context.
Thanks a lot.
Robert -
Set user inherit permissions check box using powershell
Hi All,
How can I set the the "include inherit permissions from this objects parent" propertiy in Active Directory user object to a list of users using powershell.
This option is not checked for some of my users and I'll like to set it using a powershell script.
Thanks
Simon
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010, CCNAdownload Quest Active Directory:
Get-QADUser -SizeLimit 0 | ? {$_.DirectoryEntry.ObjectSecurity.AreAccessRulesProtected} | Set-QADObjectSecurity -UnLockInheritance
or
Get-QADUser -SizeLimit 0 | ? {$_.security.PermissionInheritanceLocked} | Set-QADObjectSecurity -UnlockInheritance
or
$user = [ADSI]"LDAP://cn=kazun,ou=test,dc=contoso,dc=com"
$acl = $ouser.objectSecurity
$isProtected = $false # allows inheritance
$preserveInheritance = $true # preserve inherited rules
$acl.SetAccessRuleProtection($isProtected, $preserveInheritance)
$user.commitchanges()
I had this issue and using both of Kazun's methods worked. A mod should mark this as the answer.Paul Frankovich -
Odd behavior when duplicating pages
I have run into some odd behavior when duplicating pages.
First I spent many hours trying to acomplish a double trigger effect in which the last trigger opened a large image in a pop up window. Thanks to help from agm 123 and Sachin Hasija see the posts here: http://forums.adobe.com/message/5186239#5186239
And the result here: http://ljusa.businesscatalyst.com/stockholm--1.html
I had to do a number of work arounds, but succeeded and will help anyone interested to reproduce this type of effect.
My next step was to recreate this effect for another 50 pages. The best way I have found is to duplicate the first page. This is where it gets weird.
When I create a duplicate and replace the images in the newly created pages (done by changing the fill to the new image) with different ones and save it the changes are effected on the original page, not the clone. No big problem, just switch the names and continue.
The next problem that occurs is that when I go to make further copies a variety of odd behaviors creep in. The biggest problem is a repositioning or resizing of photo frames/containers. The images do not change, just move as the frame resizes. When I try to resize the frame it snaps back to it's larger new size. This is a phenomenon that I have seen in other instances in work with lightboxes and slideshows. It seems that some other unseen element has jumped into the frame with the original frame.
The method I have used to create these pages is as described in the post at: http://forums.adobe.com/message/5186239#5186239
It involves creating a blank composition widget and then placing a composition lightbox widget trigger into the blank hero.
I have already invested more time than I should have on this and would like to keep it simple, yet as I have 50 pages to go I could start from scratch if someone has a better method of doing this.
Suggestions?Just an update.
I haven't seen the naming problem with duoplicates reoccur. I am however still stuggling with duplicates.
I have a page with 5 image frames linked to images which in turn trigger a lightbox. When I create a duplicate of a page there is always at least one of my image frames that moves and or a link to an image that is dead. The only recourse I have had is to recreate one of the lifgtboxes for each new page I create. With all the formatting this is time consuming.
I have tried copying and pasting the entire page into a blank page, but then there are even more problems.
I have also tried to save my lightbox as a graphic style, but that dooesn't seem to work either.
Please Help! I've got at least 45 more of these pages to replicate1 -
Inherit Permissions from parent
If I were to use Inherit permissions from parent instead of standard POSIX on a share, what happens
when you propergate permissions? Do permissions that you explicitly set get changed by the parent folder?
Are there any issues I should be aware of before trying Inheritted permissions?
The reason I want to change is because I have folders on my RAID that for instance hold raw un-touched images, whoever saves the files into this folder becomes the owner and everyone is read only, which is no good if someone else wants to make changes and save over the image, I have ACL set to try and overcome this, but Photoshop doesn't respect ACL and just goes by the POSIX permissions. Which means users are having to save to desktop and the drop the file in the raw image folder to replace it - which is ok but not perfect.
If I were using Inherit permissions and set the raw folder to everyone read and write, then in theory any files added into the folder would be read and write for everyone, is this correct? if so, what would happen to the permissions when a second user edits the image and re-saves it, is it still inheritting the read write permissions?
Hope this makes sense and i'm not rambling too much, but with 3Tb of files on the RAID I can't afford to experiment and screw up the permissions on the existing files else I'll be killed by 10 angry designers!Did you ever find an answer to this? I'm having the same problem and wondering if it's simply a 10.5 server glitch. You shouldn't have to use ACL to get around it and as far as I know, if you set POSIX to inherit permissions from parents, that's exactly what should happen. But it doesn't for me either. Whoever creates a folder on our RAID becomes the new owner and staff is read-only.
-
Photoshop CS4 - odd behavior in titling
All,
I edit video almost every night and every weekend and have been doing this for several years now. Suddenly, I'm seeing an odd behavior now that I've never seen before.
I created a title that consists only of a red circle and have it as one of my title templates. I've used the red circle template across many projects without problems I use it to highlight an athlete in the video. I use keying so that the circle stays around the athlete for the entire clip so that a coach can focus on the specific athlete during the action. My videos are used by college coaches for recruiting high school athletes.
In the last few days, when I select the red circle title and the Motion bar under Video Effects under Effects Control so I can perform the keying, the video will flip to black so that all I see is the red circle on a black background. If I drag the scrubber a little, the video reappears with the red circle overlayed, but as soon as I release the scrubber, the video goes black again. This makes it impossible to change the key values for the title since I can't see the video.
For trouble-shooting, I created a new red circle title from scratch but it behaves the same. I tried using a completely different title but it behaves the same.
I assume I inadvertantly hit a switch somewhere that has changed the behavior, but I can't figure this out. If someone can tell me what I'm doing wrong, I would greatly appreciate your help.
Thanks,
Dan
Windows 7 64-bit
Adobe Production Premium CS4
Adobe PPro CS4 4.2.1
Canon AVCHD video with output typically to H.264
Asus Laptop G74Sx with 8g RAM and Intel Core i7-2630QM CPU @2GHzWhat exaxctly are you talking about? Using the graphic in Premiere? If so, this is probably a more appropriate question for the PPro forum. That aside, why even bother? Premiere's title tool can do circles with transparency no problem and then After Effects has this neat parametric Circle effect and a motio0n tracker, too. Sounds like you love doing things the hard way....
Mylenium -
HELP! Odd behavior in Photoshop CS6. Anyone have a solution?
Hi I am having really odd behavior in CS6. I have reset and cleared preferences. As you can see from the screenshot I have a rectangle shape layer but I have not assigned any shape layer effects to it. PS is adding a black border on its own and I have no idea how to get rid of it. I have been using photoshop for 20 years and this is driving me nuts. I've never seen this behavior before. If I add a color overlay the line is still there. If I rasterize the shape layer then add a color overly the outline disappears. But I don't want to raterize my shape layers. Anyone know how to get rid of it? Thank you in advance to anyone who might have a solution.
You appear to be on Windows, so I couldn't help you anyway.
But for the benefit of Photoshop Windows users, please consider the following:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Maybe you are looking for
-
Delivery Notes Generation Via Pick List
Am trying to generate delivery notes off pick tickets and i can't find any code example. I now came up with the following code but am having issues when items are in multiple Bin Locations. Public Sub Sales2Delivery() '(ByVal OrderID As String)
-
Can i get a refund for an app purchased by a hacker?
help! my account was hacked and a $10 app was purchased. can i get refunded?
-
MBP wakes up immediately after sleep
So my MBP has been waking up from sleep right after I put it into sleep mode for some reason. According to the console it's Wake reason: XHC1. After it wakes up to the login screen it then goes to sleep normally if I leave it, but choose apple menu -
-
How do I get an ActiveX Reference to sheet that is already open.
I need to get a reference to an Excel sheet to write some data to. The problem is the workbook is not opened by ActiveX and I can't seem to find the right combination of Methods and Properties to get the reference. This is on WinXP, Office XP and Lab
-
Hi all, Is there any ABAP API for DDIC? I wanted to manipulate DDIC structures and types from code, for example, change names, create a new DDIC object, add a new field to an existed table. I guess we have that but I didn't find any documents on this