Inheritance between a Business Event Type and a Business Event

Hello,
When we created a Business Event (Object E), this one have some inheritance from the business envent type (Object D).
I don't find where I can customize this. Do you have an idea ?
I have created a custom PD infotype (available for object D and E), will it be possible to have inheritance of this infotype too when I will create my business event ?
Thanks for your feedback,
JF

Hi,
You can copy the Business Event and make changes only to the fields which needed to be changed.
Regards
Chandrashekar

Similar Messages

  • Difference between SAP BI 7.0 and SAP Business objects

    Dear All,
        I would like to know what is the difference between SAP BI 7.0 and SAP Business objects.What Advantage will we have if we implement sap business objects rather then SAP BI 7.0.WOur management wants to implement

    Hi,
    Strategies for better reports, queries, Web reporting, formatting, dashboards, cockpits, planning, and performance management
    advantages of BO
    Crystal Reports XI is the latest version of the report writer from Business Objects. Local reports guru David McAmis takes the new version for a spin.
    Most developers might know Crystal Reports from versions included in Studio, Visual Studio.NET, and other popular developer IDEu2019s such as BEA Workshop, C# Builder, Delphi 2005, JBuilder, WebSphere.
    In this latest installment both report and application developers have something to be excited about as there are a host of new features for report design and integration. Hereu2019s a run-down of what you can expect in this release.
    What's New in Xcelsius version 4.5
    Xcelsius now provides the following new components:
    Candlestick and OHLC Chart components
    The open-high-low-close and candlestick charts are primarily used to display stock data. Each marker corresponds to the four values, which are represented as lines attached to the marker on the OHLC chart and as colors on the candlestick chart. Open displays the opening price of the stock. High displays the highest price the stock achieved on that day. Low displays the lowest price the of the stock on that day. Close displays the closing price of the stock.
    For more advantages go through the below link
    http://www.crimson-consulting.com/marketing/experience/knowledge/white_papers/cognos_tco.pdf
    For BI go throug hthe below link
    http://www.elegantjbi.com/Why-Business-Intelligence-better/business-intelligence-advantage.htm
    Regards,
    Marasa.

  • Difference between fully-specified data types. and generic types

    Hi,
    Can anyone tell me the difference between fully-specified data types and generic types.
    Thanks in advance.
    Regards,
    P.S.

    HI
    Generic table types
    INDEX TABLE
    For creating a generic table type with index access.
    ANY TABLE
    For creating a fully-generic table type.
    Data types defined using generic types can currently only be used for field symbols and for interface parameters in procedures . The generic type INDEX TABLEincludes standard tables and sorted tables. These are the two table types for which index access is allowed. You cannot pass hashed tables to field symbols or interface parameters defined in this way. The generic type ANY TABLE can represent any table. You can pass tables of all three types to field symbols and interface parameters defined in this way. However, these field symbols and parameters will then only allow operations that are possible for all tables, that is, index operations are not allowed.
    Fully-Specified Table Types
    STANDARD TABLE or TABLE
    For creating standard tables.
    SORTED TABLE
    For creating sorted tables.
    HASHED TABLE
    For creating hashed tables.
    Fully-specified table types determine how the system will access the entries in the table in key operations. It uses a linear search for standard tables, a binary search for sorted tables, and a search using a hash algorithm for hashed tables.
    Fully-specified table types determine how the system will access the entries in the table in key operations. It uses a linear search for standard tables, a binary search for sorted tables, and a search using a hash algorithm for hashed tables.
    see this link
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb366d358411d1829f0000e829fbfe/content.htm
    <b>Reward if usefull</b>

  • Difference between Mb1b 541 Mov type and ME2O

    Hi,
    I want to know difference between Mb1b 541 Mov type and ME2O.
    Thanks and regards
    Gitesh

    Hi,
    ME20 has 2 options one to directly transfer, that is without delivery.  And, anotehr is with delivery.
    Option 1 will create a material document in ME20 transaction.
    With option 2 it will create a delivery note.   you have issue the material in vl02n if delivery note is created and then material documetn will get generated.
    regards
    alexandro.

  • Allow Non-Administrator accounts to create event sources and write to event logs

    We are setting up BizTalk 2013 in Windows Server 2012 and one of the requirements is to allow the service account to create sources and write in event logs (Application) of the BizTalk servers. We have found what it seems to be a simple solution for this
    without giving service accounts local admin rights.
    Give Full control for the following registry keys to the service accounts or groups to allow creating of event sources and write to event logs:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Security
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Security
    Note: when changing permissions for EventLog key, the child keys will inherit the permissions by default except Security key which must be done manually.
    Initial tests using a .net test app seems to work as expected. New event sources are being created in the event logs and writing to the event logs after that works perfectly.
    The above method has been deployed in production and this is the most suitable solution for us.

    Hi Keong6806,
    Thanks a lot for posting and sharing here.
    Do you have any other questions regarding this topic? If not I would change the type as 'Discussion' then.
    Best Regards,
    Elaine
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Transaction KB16N business-object type and key for GOS

    When attachments (notes, PC documents etc) are made to a manual cost allocation in transaction KB16N using GOS (generic object services):
      what is the business-object type?
      how is the business-object key constructed?
    I suspect that the business-object type is BUS6036.
    I suspect that the business-object key is the concatenation of the controlling area and the document number (using internal values).
    Is that correct?
    The reason for my question is that I have a program to display attached notes (and allow drill-down to attached PC documents) that works for various business objects (billing documents, purchasing documents and some FI documents), but I cannot get it to work for manual cost allocations.
    John

    Hi Michele 
    The transaction you are looking for should be SWO1
    Then put the ex "BUS2000116" into the Object/Interface type and ...
    Guess it will help you
    Best Regards
    Daniel

  • Business Object type and Transactions

    Hi, gurus.
    Where can i check the matching of Business Object type with transaction type , i.e. CRM Service Process ( BUS2000116 and SLFN)?
    Is it possible to change these kind of settings? Where?
    Thanks a lot

    Hi Michele 
    The transaction you are looking for should be SWO1
    Then put the ex "BUS2000116" into the Object/Interface type and ...
    Guess it will help you
    Best Regards
    Daniel

  • Business Object Planning and Consolidation&Business Planning and Consold...

    Hi Friends
    Please can you advise me on the difference between
    Business Object Planning and Consolidation and Business Planning and Consolidation
    for both the topics, SAP provides short name as BPC
    *Thank you and Kindest regards
    Srikaanth*

    Hi,
    Basically, there is no difference. Till the version 7.0, it was called business planning and consolidation. From 7.5 ,its called business objects planning and consolidation.

  • CSA MC Events Log and Agent Panel Events Corrolation

    I have recently install CSA MC 6.0.0.201 and the agent on a Win2003 server. I have a question of events showing up in the agent panel and not showing up in the MC events log.
    I see a number of events in the agent 'panel' event viewer. At the end of the event is a number in brackets like [176].
    When I look at the MC event viewer but those events are not being reported.
    My query is:
    #1 I believe the example [176} is the rule being triggered. So if the event is not showing up in the event viewer how to I find that rule in the policies? I finally did stumble across the rule and I see that logging is disabled for that rule, but finding that rule was a needle in the haystack search. Is there an easier way to find rules?
    #2 Maybe I do not understand this part but in the MC I placed this server (the one with the MC) into 'Audit Mode' in hopes that would get the events from the agent to show up in the MC event log. No good. Is there a way to get all events - even if the rule says to not log the event - so show up in the MC log so I can creat an exception?
    Thanks
    Larry

    Tom,
    I think I may have made some progress. Yes I'm in advanced mode. I went into Systems | Groups and first selected the 'Servers' and turned on logging. Still most the events in the agent event viewer were not making it to the MC event log.
    So I went back in to the Systems | Groups and found there was a group called 'Servers - CSA Management Center' and turned on logging there and that got the events to start flowing into the MC events.
    Maybe this will help me get going.
    Larry

  • Dynamic Event Creation and Handling the events

    Hi All
    I am using WAS 6.4.
    I have two components say Component A and Component B in which Component A is a reusable component and is used by other components say for e.g the Component B.
    The following is the requirement.
    Component A should create buttons for other components dynamically.
    As an example, Component B specifies to Component A the buttons required say button B1 and button B2.
    Component B also contains methods M1 and M2 for the buttons created by the component A.
    Now I would like to associate these buttons created by component A with the methods created in Component B
    The number of buttons that are to be created may vary from component to component.
    If any one as any suggestion or solution, help me out.
    Thanks
    Regards
    NagaKishore

    Hi NagaKishore,
         I'm not exactly sure why you want to do this, but it is pretty easy if I switch it up a bit.  (Maybe you are trying to create a navigation page or something?) 
         Instead of your component B using component A, if you define a Web Dynpro interface in component A, then implement this interface in component B (or all component Bs), achieving your goal would not be too difficult.  It could define a generic method (or event) with a "button key" as an argument that would tell component B which button was pressed and allow it to behave as desired.  The Web Dynpro interface defined in A could also have an interface context that would allow the the button text to be passed along with (for the sake of simplicity) a "button key" that component that should be triggered when the button is pressed.  (Note this could be a varying size list as required.)
         The component B(s) need not be known until run-time.  They can be created using something like:
    wdThis.wdGet<Used Compontne Name>ComponentUsage().createComponent(<Component Name>,<Object Name (if in a different component)>)
         Once the component is created, the context can be accessed giving the list of buttons to create and the values.  The buttons can be created in the wdModifyView during the first pass of the creation of the view displaying the buttons (after the dynamic creation of the used components which can occur in the wdDoInit of the component controller).
         If the user presses a chosen button on component A, then the generic method (most likely an event) of component Bs interface is called and passed the "button key", component B then takes over.  Note this would also work if component B had a visualization component that must be displayed through an interface view that is defined on the web dynpro component interface that is implemented by B.
         Hope this helps or at least triggers discussion that will answer your question,
           --Greg

  • How do I repeat an event monthly and have the event deferred to a Monday if that event falls on a weekend?

    For example; a company payed their employees on the 1st of each month. If the 1st falls on a weekend they will be payed on the next following working day. How would I document this event in calendar so that the monthly event recurs without falling on a weekend?

    sd,
    Choose "repeat" Custom..."Frequency" Monthly "On The" first weekday.

  • Event 7000 and 7001 in event log; cannot verify signature

    On the user's system, the Workstation service will not start, preventing access to network drives through UNC paths.
    The dependencies for the Workstation service (Browser Support service, SMB 1 redirect, SMB 2 redirect) are not starting because the system detects a problem with the digital signature for a file. For example:
    The SMB 1.x MiniRedirector service depends on the SMB MiniRedirector Wrapper and Engine service which failed to start because of the following error:
    Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
    I've run sfc /scannow a number of times, but that does not resolve the issue.
    Suggestions, please!

    I tried updating bowser.sys at an elevated command prompt using the following commands:
    takeown /f  C:\windows\system32\drivers\bowser.sys
    icacls C:\windows\system32\drivers\bowser.sys  /grant administrators:F
    copy file-from-working-system C:\windows\system32\drivers\bowser.sys
    The CBS.log from sfc doesn't indicate the directory in C:\Windows\winsxs to copy the file. There are multiple directories for the file, each tagged with multiple IDs. I used the same commands on the latest directory in \Winsxs, copied bowser.sys there, but
    sigcheck shows that the file is still not signed.
    Sigcheck v2.1 - File version and signature viewer
    Copyright (C) 2004-2014 Mark Russinovich
    Sysinternals - www.sysinternals.com
    c:\windows\system32\drivers\bowser.sys:
            Verified:       Unsigned
            Link date:      11:55 PM 2/22/2011
            Publisher:      Microsoft Corporation
            Description:    NT Lan Manager Datagram Receiver Driver
            Product:        Microsoft« Windows« Operating System
            Prod version:   6.1.7601.17565
            File version:   6.1.7601.17565 (win7sp1_gdr.110222-1630)
            MachineType:    64-bit
            Binary Version: 6.1.7601.17565
            Original Name:  browser.sys
            Internal Name:  browser.sys
            Copyright:      ⌐ Microsoft Corporation. All rights reserved.
            Comments:       n/a
            Entropy:        6.178

  • Define event types in Customizing and restart the transaction.

    how to define event to restart the transaction in BADI
    I have given error message in badi. it is giving
    No SAP Event Management communication for events; no event types def
        Message no. /SAPTRX/ASC084
    Diagnosis
        You have not defined event types for the business process types.
        therefore not possible to communicate event data to SAP Event
        Management.
    System response
        The communication of event data is aborted.
    Procedure
        Define event types in Customizing and restart the transaction.

    Hi Kevin,
    What DataSource does your testalias refer to?
    - If it is a custom DataSource, you must have created this custom DataSource also.
    - If it is the default DataSource, you shouldn't have this problem in general...
    In either case, you can try deploying your DataSource and/or DataSource alias together with your application:
    http://help.sap.com/saphelp_nwce10/helpdata/en/45/07d2eeea3e0485e10000000a155369/frameset.htm
    http://help.sap.com/saphelp_nwce10/helpdata/en/45/c82cd460a42e96e10000000a155369/frameset.htm
    I hope that helps!
    Regards,
    Yordan

  • Business Events Type Attachment

    Dear Experts,
    Greetings!
    We have been attaching attachments for business event types . Now Business want see how many attachments were attached for a particular event type.
    However we are able to get attachments for a specific event type now problem is how to identify corresponding event type or number of a attchements
    Do we have any standard report to get Business events type with reference attachments... or any thing so.
    Thank you in advance.
    Regards
    Vijay

    Hi Vijay
    One solution is to, you define the attachments such as resource then you can use the resources to get the number of attachment for each event type.
    Regards,
    Shirin

  • What is the difference between /6** wage types and /7** wgae types

    Hi All,
    Can you please tell me the difference between /6 & /7 wage types
    and in what scenario /6 and /7 wage type amounts differ
    Thanks in advance
    Krishna

    - /6XX - Gross wages less pre-tax deduction. For example, if salary is $1,000 and the 401(k) deduction is $200,/6xx will be $800. SAP passes this amount to BSI for tax calculation. (/EXX - Tip income processing)
    - /7XX - Reportable taxable amount calculated by BSI. If ceilings on taxable amounts exist and are exceeded, BSI will return a reportable taxable amount of zero. (/FXX - tip income processing).
    Arti

Maybe you are looking for