Inherited code that has the terminals all placed as icons

IMHO, the stupidest thing that we deal with in LabView is neophytes creating programs and using terminals placed as icons. Space on a diagram is already at a premium.... Anyway, off my soapbox. I have inherited code from a person who has used "View as Icon" terminals ALL OVER the diagrams. Our standard is to not do that and rather than click on EVERY SINGLE terminal (there are a lot), is there anyway that I can do a mass property change of all the terminals so they are not viewed as icons?
Note to NI.... get rid of that option. However, I am not opposed if some can tell me a good reason for maintaining that option and having large icons all over the place that to the uninitiated are easily confused with the similarly sized sub-vis.
Thanks.

altenbach wrote:
Personally I would prefer something a little bit less radical than "...everything in folder and subfolders...". How about something that can be placed in the menu which then would apply the action to the current VI only?
The original poster sounded like he needed something that would be a one-shot fix for everything in his hierarchy. For those of you who wish to write your own tool to do this, here is a subVI you can call that takes in a VI reference and performs the non-icon view conversion on that VI. It has a boolean input to specify whether or not you want to save the VI after the conversion. Saved in 8.0.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
Change Terminals to Non-Icon View (Single VI).vi ‏24 KB

Similar Messages

I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the "Recommendation Report" screen, I clicked "Non-Included Trans." and saw that one of the vendors (Vendor Code: WILCO) has the followi

Hello,
I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the “Recommendation Report” screen, I clicked “Non-Included Trans.” and saw that one of the vendors (Vendor Code: WILCO) has the following error:
“The document amount is greater than the max. amount allowed in the payment methods linked to the BP”
Upon checking, the “PCF-W” Payment Method linked to WILCO does not have any restrictions, nor does WILCO have any credit/commitment limit set. I have also appropriately defined the Dummy Business Partner Bank (under Payment Terms) as well as checked the “Included” box for PCF-W on the Payment Run-Payment Methods screen.
Could anyone please help me on this?
Salamat,
Cat

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

How do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer

how do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer. Baiscally the problem is that one comuter and one account has always been sued for eey persons itunes. Now if we want to be able to backup and use itunes on our own computers fro our iphones and such, how will all he data that is on our phones not be deleted once its plugged into a new computer? Also, is theere a way to get all the stuff on thw current itunes onto each computer, via differtn account name?

option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

How do I stop the page from re-directing when I am searching for something? It re-directs to something that has nothing at all to do with what I was searching for

I put something in the search bar such as "making centerpieces for baby shower" or I put it into google. Then a bunch of matches come up, I click on one that looks good, but immediately it goes to "re-direct" and a web site comes up that has nothing at all to do with the search like an auto shop or something.

I would need more details for this, as you have mentioned rulers move ? Are you referring to rulers on page in design ?
You can move a guide lower down the page , ruler marks will be displayed on ruler but that will not stop you moving the guides.
What happens if you uncheck rulers from top view options ?
Thanks,
Sanjit

Acrobat on OSX does not use printer preset. Every single time I have to print I have to click printer and then print to load the preset and then click print again from the main dialog. I am printing to a Xerox that has the copier code in the preset so if

Acrobat on OSX does not use printer preset. Every single time I have to print I have to click printer and then print to load the preset and then click print again from the main dialog. I am printing to a Xerox that has the copier code in the preset so if I don't do this it will not print. This has been broken for in every version I have tried. This extra clicks are taking years off my life. Did I remember to do the extra clicks? I don't know, I guess I will run down the hall and check. Please fix this.

What operating system are you running? I assume they had you install the latest BIOS. True? If it were mine, I would suggest forcing it to use integrated graphics (in the BIOS) to rule out a problem with the NVidia driver.

I have an imac that has the panther upgrade disk. I need to reinstall the os, but cants because os 10.2 was preloaded on the computer. All I have is the upgrade disk, which wont do!! What do I do?!!

I have an imac that has the panther upgrade disk. I need to reinstall the os, but cant because os 10.2 was preloaded on the computer. All I have is the upgrade disk, which wont do!! What do I do?!!

Why do you need to re-install? Try to fix the problem.
I would assume a 10.2 full install would be fairly cheap on ebay.
Robert

Recently my macbook charger died and I purchased from a third party seller a new charger that has the same amperage and voltage listed, but different model number. my question is should I be worried, or is it all right?

So recently my model number A1184 charger for my mac book pro died and I purchased a new charger online. They sent me a different charger, a model number S165365, that has the same amperage and voltage listed. my concern is whether it is okay to swap one out for the latter?

Is this your charger you got?
http://www.ebay.com/itm/like/331023651658?lpid=82
I suppose it's OK, though if I were you, I get original stuff even if it's expensive.

Is it Possible in Purchase Order that putting the BOM, all the components ?

Is it Possible in Purchase Order that putting the BOM, all the components of that particular ges populated in the Rowt ? This is necessary to select single - single items is PO..
We are also using MRP and Forecast. We want to use this method in case of placing URGENT Purchase Order without considering WH stock + PO ordered + ....................
What kind of Query we would write , that putting the BOM in the UDF, the componenets get populated in Purchase Order...
Please give complete query.................

The query I have provided earlier needs to be set in the ItemCode field at the row level and not on your User field at the header.
The query below (same as earlier with the addition of the user field name - please verify) will show the Child Items of the BOM item who code you have entered at the Header level in your UDF.
SELECT T0.Code FROM [dbo\].[ITT1\] T0 WHERE T0.Father = $\[OPOR.U_BOMNAME]
This will not automatically fire but the user has to first enter the Vendor Code and then enter the U_BOMName and then in the Item code field press Shift+F2 which will fire the above query FMS displaying the child Items for this BOM.
Suda

Where does FireFox get the default value of a preference from. What is the format of the file that has the default value?

Where does FireFox get the default value of a preference from. What is the format of the file that has the default value?. I need the actual default value for a particualr preference.
About:config does show some default values but I need the source from which about:config picks up the default value.
Any help in this direction is greatly appreciated.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

The prefs that aren't hidden if they are the default are stored in two JavaScript text files in the Firefox program folder
You can open them via these links in a Firefox tab:
<code>resource:///defaults/pref/firefox.js
resource:///greprefs/all.js
</code>
([/forum/1/702598])

How can i retrieve data from a macbook pro that has the flashing folder with an ? mark in it, to a brand new iMac

I want to do a data recovery of my 15" MBP that has the flashing folder w/ ? mark in it, to an iMac 21.4"; how can i go about that?

DJSMACC wrote:
How do I go about removing the internal drive and mount it to an external enclosure @Linc Davis??? Sorry that I'm not too hip with all the technology lingo & etc?
You'll have to watch the video and buy a few tools to extract the driive.
http://eshop.macsales.com/installvideos/
Then use something like this to connect to the other Mac or PC with MacDrive installed.
http://eshop.macsales.com/item/Newer%20Technology/U3NVSPATA/
You also can get the same adapter elsewhere online for as low as $12 I've seen.
Likely it's a USB 2,1 which your Mac's can only accept USB 2,1 anyway, no need to pay more for a USB 3 unless you want too.
No compensation for site or product mention
You likely should be having a professional or Apple tech attempt to bypass the firmware password if you forgot it, it's the best way to go about things.
Just because the Mac has a spinning wheel gray screen at boot doesn't mean it's ruined, you just need to bypass the firmware password and then from there fix the machine's cause for not booting, which is likely a software issue from a third party kernel extension file.
Step by Step to fix your Mac
You should know that opening the iMac could likely ruin it and will ruin any warranty or AppleCare, and if it's a Early 2011 model or later you can't replace the hard drive yourself as Apple has proprietary software installed on the drive that needs to "talk" to OS X to control the fans speeds.
Good Luck.

My iPhone 5 has a grey-ish blue splodge on the screen. What is it and how can I get rid of it? The place that has the spot is about the size is about 2cm,it still works where the spot is. I haven't sat on my phone or hit it to hard, not that I remember.

The place that has the spot is about the size is about 2cm,it still works where the spot is. I haven't sat on my phone or hit it too hard, not that I remember. I noticed a while ago. Will it disappear? I can see the things that should be where the spot is eg it's on the keyboard and I can see the keys. Will this spread to the whole screen? How can u get rid of this?

If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5s, iPhone 5c,
iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.

How do I determine the portion of a curve that has the greatest change in slope?

I am acquiring a dc voltage that shows more than one variation in slope.
I would like to know the portion of that curve that has the greatest change in slope

Also remember that if your signal has significant noise, you would need to do some filtering or you'll only measure the very steep "slopes" between successive points. Probably not what you want.
LabVIEW Champion . Do more with less code and in less time .

Table that has the hier text names and the corresponding hier ID

Hi,
Would anyone happen to know the table that has the hier name text as it appears from the infoObject level and the corresponding Internal hierarchy ID (unique ID) for data element RSHIEID. I would want ot be bale to match the text name o f the hier to the hier ID.
Thanks
Will

Trying to make it simpler taking the 0material hierarchy note that the 0material has been loaded with 3 different hierarchies:
fields in the H table:
HIEID - 434FLR9O6DX0XXJS3CLIYZODD (Refers to the particular hierarchy as mentioned I have 3 hierarchies loaded to 0Material)
OBJVERS - Active and so on
NODEID - 4 digit internal number of the hierarchy
These are the Keys that identifies the hierarchy uniquely in my case the 1st hierarchy.
Now if you want to find the nodes then based on the example above I will take the hierarchy id ie 434FLR9O6DX0XXJS3CLIYZODD for the field HIEID that would give me all the nodes of this hierarchy
Note: the HIEID for a particular hierarchy can be found from the HEADER info
Thanks,
Raj

JS: Get Control that has the Focus and paste something into it

Hi,
I want to implement some clientside code that gets the control that has the focus and copy some text into it.
Can this be easily accomplished?
Thanks
Sven

Hi,
According to your post, my understanding is that you want to get the focus element via JavaScript.
We can use the document.activeElement to get the current active element.
http://stackoverflow.com/questions/497094/how-do-i-find-out-which-dom-element-has-the-focus
http://stackoverflow.com/questions/11277989/how-to-get-the-focused-element-with-jquery
Then you can use the obtained focus element to paste text into it.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Jason Guo
TechNet Community Support

How come my macbook air has so little space. I deleted everything that I don't need and everything that has the most space I'm told NOT to delete. Everything I find is in either KB or very low MB.

How come my macbook air has so little space. I deleted everything that I don't need and everything that has the most space I'm told NOT to delete. Everything I find is in either KB or very low MB.

Check what is in your SSD/ storage on your macbook Apple Icon > about this mac > more info > STORAGE tab on top
recommend handy useful APPS such as :
Disk Expert
https://itunes.apple.com/us/app/disk-expert/id488920185?mt=12
Disk Map
https://itunes.apple.com/us/app/disk-map/id715464874?mt=12
dont need them, but theyre very useful.
also the best is DAISY DISK
https://itunes.apple.com/app/daisydisk/id411643860?mt=12&ign-mpt=uo%3D4
See here for answer about the OTHER which is taking up space:
http://pondini.org/TM/30.html
and here:
http://pondini.org/OSX/DiskSpace.html
See Kappys excellent note on the rest of “other” files taking up your space:
What is "Other" and What Can I Do About It?
see here:
Your Solid State Drive and having enough space inside your Macbook Air & Pro
Solid State Drive usage premise, or the “more space / upgrade SSD” question
There have been questions posed and positions taken by many people who are trying to use their Macbook Air or Pro’s solid state drive (SSD) as a mass media storage device, for either pictures, videos, massive music collections or all three combined; but this should not be the working premise of a ‘limited’ SSD and its use.
In which, it’s the case of those users with either 128GB, 256GB, or even 512GB of internal SSD space, that have or are running “out of space”, that questions are raised. The immediate premise of some users can sometimes be “(how to / if) upgrading my SSD” when in fact in nearly all instances another approach is the logical and sensible one that needs to be looked into and exercised.
Any Macbook containing a SSD should be idealized as a ‘working platform’ notebook containing all your applications, documents, and weekly or bi-weekly necessary files. All collections of media files such as pictures, music, and videos, unless directly needed should be kept off the notebook and on an external hard drive or likewise. While the ‘working platform’ premise is also the case with larger internal conventional hard drives of 1TB+, its implementation isn't as critical except in terms of data protection.
Realistically, you should at most coordinate roughly 20 to 25% of your total SSD space to all audio-video personal use media (picture / music / video collections), leaving the remaining amount on an external HD.
Nobody should consider any notebook a data storage device at any time under any circumstance, rather a data creation, sending, and manipulation device; and in the case of a SSD, this is more important for purposes of having sufficient working space on the SSD and reducing SSD ‘bloat’ in which cases someone is wrongly attempting to use the SSD space as a large media storage nexus.
The rare exception to the collective usage and premise of SSD use in which a much larger SSD is truly needed are for those in video and photography professions that require both the extremely fast speeds of the SSD and the onboard storage for large and or many video and photography files. However this also falls under the premise of a ‘working platform’ for such peoples rather than the intent of many who are using the SSD as passive and static data storage for media files very infrequently needed or accessed.
All on-notebook data collections should be logically approached as to necessity, and evaluated as to whether it is active or passive data that likely doesn’t need to be on the notebook, allocations of space-percentages to as-needed work and use, apportioning space for your entertainment media, and questioning whether it should it be on the notebook for more than short-term consumption.
Considerations should be made in the mind of any user in differentiating the necessary system data (System hub) comprising the Mac OSX, applications, necessary documents that both must and should be on your internal SSD, and that of the users personal data (Data hub) comprising created files, pictures, music, videos, PDF files, data created or being created and otherwise, that likely unless being used soon or often should be parked on an external hard drive for consumption, or temporarily loading onto the internal SSD.
You both can and should purchase whichever SSD size you need or see fit, but even in the case of the largest of SSD, unless use-considerations are made, and SSD spaces are allocated as should be the case indicated above, one can easily and immediately run into this quandary of “needing more internal SSD space”, in which instance a different approach in usage must then be implemented.
However it is almost always the case, that such large media files are wanted to be stored internally rather than actually needed, in which case the external HD is both prudent as well as necessary. Additionally costs per MB are infinitely less on an external HD than an internal SSD in any consideration of data expansion needs.
A Professional Example
In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace.
You should also never be put in the position of considering “deleting things” on your Macbook SSD in order to ‘make space’. This is especially what your external HD is for.
Professionals who create and import very large amounts of data have almost no change in the available space on their notebooks internal SSD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your Macbook has a SSD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your notebook to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.
Slim USB3 1TB external hard drive
External Hard Drives
External hard drives are both extremely cheap and regardless of the size of your internal SSD (or even internal hard drive if the case), you need an external hard drive with your SSD equipped Macbook for several reasons:
1. Data backup and protection.
2. Redundancy for important data.
3. Necessitated ideal space for large media files for collections of pictures, videos, and music etc.
While ever changing in price, typical portable 2.5” external hard drives in USB3 run roughly $65 for 1TB or $120 for 2TB small portable USB3 hard drives. Such drives range in thickness between 5mm and 15mm, with recent improvements in storage of 500GB drives in 5mm profiles.
There is almost no premise in which a small 12mm thick 1 Terabyte USB hard drive cannot be taken along with any Macbook as an external large storage extension inside any Macbook carry case or pouch. Typically such external HD profiles are not much bigger than a deck of cards.
External hard drives are a foregone necessity for purchase with any Macbook for at the very least Time Machine backups, data redundancies, and ideally for large media storage.

Inherited code that has the terminals all placed as icons

Similar Messages

Maybe you are looking for