Inheriting permissions on a sub-subsite uses home as parent and not the subsite of home
Hello,
I want to execute my permissions strategy on a Sharepoint 2013 Foundation Server. Now I have a small problem with the inheritance of permissions.
This the test site:
Site Collection "Home" -> Subsite (unique permissions) "Projects" -> Subsite "Project A"(inheriting)
Expected behaviour:
"Project A" inherits the unique permissions from his actual parent site "Projects".
Actual behaviour:
"Project A" inherits from the root site "Home".
This behaviour means that in our topology I can never use inheritance. Inheritance is desirable, because it reduces administrative effort.
How do I get what I want?
Regards
chn
I have "fixed my error". I misunderstood the concept of page permissions and site permissions. I have set permissions only through page permissions, leaving site permissions untouched. Since all subsites inherit from the root site, the page permissions
of a sub-subsite also inherits from root.
Now I properly set site permissions, allowing me to use the inheritance on page permissions. Everything works as I expect. On top I now fully understand the permissions, which I did not earlier, obviously.
Greetings
chn
Similar Messages
-
EPrint prints photo using my main tray and not the photo tray
Hello,
Thanks for reviewing my question. I just bought the HP Photosmart C410 printer and setup the ePrint. When I print a photo from my iPhone it prints on the photo on the 8.5 x 11 paper instead of the photo tray. What gives?
Many Thanks
PeterHey PDonstant,
1. You can go into the setup menu on the printer and go into preferences. In preferences you can go to Device Printer Tray Select and choose prompt for tray. This will give you the option to print to photo paper or Legal size.
2. You can try downloading the HP ePrint Home & Biz app and printing from there. You have the option to select the paper size and type from the app.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided. -
I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings please help me asap thankyou so much
Log in to icloud.com on a web browser with your Apple ID and disable FMiP there.
-
I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
Thank you!Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it. -
Hello I recently downloaded an app on my iphone 4s - Remote mouse- so i can control my laptop that is connected to my tv, it used to work fine and now the connection fails, I downloaded another app and the same problem occurs, its not the firewall and both phone and laptop are conected to the same wifi, i also tried to connect it manually with the ip address and still no connection, can you help??
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Then reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.(No data loss) Try it again. -
I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit") -
How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.
The devices are not designed for transfer of that kind. Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.
-
How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.
So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946 -
I have an iTunes account with a $25.00 credit but everytime I go to purchase a song, it goes to my credit card details. How do I use the iTunes credit and not the credit card?
Just to confirm, you are logged into the iTunes Store using the account in which the balance exists, and the balance is showing at the top of the iTunes Store window? And you're not trying to purchase gifts for someone else?
-
I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.
Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like. -
How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
CS 5.0 launches the internet browser. > TO SLOW I DONT WANT THIS.
CS 3.0 uses the local help files > I WANT THIS FOR 5.0.You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
Community Help Application -
I recently began using reminders in ical and downloaded the iPhone and iPad app. It works great. However, the reminders in ical on the COMPUTER is difficult to work with - thin long column on the right rather than in it's own screen. is there a reminders app for the COMPUTER that is more user friendly?
sgreenie,
If you are willing to wait, Apple - OS X Mountain Lion - Inspired by iPad. Made for the Mac explains that a "Reminders" application will be included in the next release of OS X. -
I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?
Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html -
For some strange reason if i attach my 2 apple cinema displays to my iMac to make a triple screen set up msn messenger video chat does work but it uses the apple cinema display inbuilt webcam and not the iMac webcam. Its annoying as i have to turn sideways to get into the video call view.
So i have a set up like this: an apple cinema display thunderbolt, then in the middle an iMac new then to the right of the iMac another apple thunderbolt cinema display. WWhen i use MSN messenger to make a video call it uses the inbuilt webcam on the far right apple thunderbolt cinema display and not the inbuilt webcam in the iMac in front of me, its annoying any ideas please.
If i unplug both side cinema displays MSN messenger uses the inbuilt camera on the iMac like normal but when i use extra screens it uses the webcam built into those and not the iMacs webcam.I would try with another client like skype or something
and if it's only msn messanger which have the problem it may
be more of a question for ms's forum? -
I want my new iPad mini to use my new Apple ID, not the old one that pops up without seemingly giving me the choice to update the Apple ID user name; as a result I haven't been able to update my APPS for some time. I changed my apple ID when I got a new e mail address a few months ago .
Any apps you have installed from the old AppleID will always be tied to that AppleID. You have no choice but to enter the password for the old AppleID if you want to update apps downloaded using that ID.
The only way to stop being asked for the password for the old AppleID is to remove all apps from the device that were downloaded using that old AppleID.
You'd then need to re-download (and re-purchase) any apps you want to keep using under the new AppleID.
Apps cannot be transferred between AppleIDs.
Maybe you are looking for
-
Crystal report parameters not available when running from within SAP B1
Hi I have found this problem a few times already and I think it is now about time I find a solution for it. On my latest Crystal report, I have 2 parameters. The 1e is a dynamic parameter, allowing the user to select multiple groups. The 2nd is also
-
Documents from external system
Hi experts. I would like to aks You how can I solve following problem: 1. I have an aplication in ABAP 2. There is an external aplication for optical archive of documents 3. We are ucing JaCo to communicate with external aplication. And, main problem
-
Hi there, I've tried to build splash screen to load the logo in .png format, but for some reason it doesn't work. here is the steps that I've done: 1> Conver the gif file to png 2> store the image file to the res/ folder 3> jar up the image with the
-
How can I use FRF function after i have collected the raw data?
I have collected a set of raw data from a vibrational test. I didn't save the FRF results. I was wondering if i can do a FRF post data analysis. Maby by using a modified verison of the FRF (SVXMPL_Baseband FRF (Simulated).vi found in the NI example f
-
Hello i made a simple project in netbeans and even i bulid a jar file but problem is when i open jar file in command prompt i got error exception in thread main please anybody tell me how can i remove this error? Thanks