Ini_ReadFromFile - open and closing of file

When I use the function 'Ini_ReadFromFile()' does it handle the "open" of the file and getting of the file handle, read the contents into memory and then "close" the file and releasing of the file handle?  I believe it does but it is not clear and I do not see it stated in the documentation.
Thanks
Solved!
Go to Solution.

You are correct that this is not mentioned in the documentation - you can use the link 'Submit feedback on this topic' at the bottom of the respective help page in the helpfile of CVI to notify NI about this omission.
If you look at the two sample projects with respect to ini files you will see that indeed there is no explicit open or close command, so reading or writing an ini file works without explicitly opening or closing the file.

Similar Messages

  • Acrobat 9 Pro Slow opening and closing pdf files - "Not Responding"

    I was responsible for pushing to get and keep 25 enterprises licenses for Adobe Acrobat Pro Vers 9. Corporate is pushing Blue Beam!
    We are on Acrobat Pro Vers. 9.3.1. Windows XP Pro 32 bit OS.  (PCs and laptops 1 - 3 years old, min 2 GB RAM, 2.1 GHz CPUs)
    Recently pdf files have been slow to open and close to the degree that windows .  It's to the point where I thought we were having network issues since this the problem is widespread.  However, it can occur when opening files on the local machine as well.  Worse, it's intermittent.  We do not run any add-ins, 3rd party or Adobe.  Most of these file run from 25kb in size to 2MB, rarely are they 5MB+.
    I just installed 9.3.2 and will keep an eye on it.  Does anyone have any ideas or suggestions as to what might be causing this or, what to look for?
    Thanks!
    Brian

    Thanks Brennao.  Our Organizer90 files were 7MB - 9MB.  I've deleted them on my PC and a couple of others.  Adobe help was no help for disabling the the Organizer.  I had to search the forums again to find out where to do that, and low and behold, the app apparently defaults to store data for 12 months!  I've change the setting to "Don't Remember PDFs", on the same PCs and am monitoring the performance to see if this is the "Silver Bullet".  If it works we'll put the instructions in our company FAQs.
    Brian

  • Opening and Closing Output Files

    I have a simple question. After opening a file for output by doing:
    PrintStream out =
    new PrintStream(
    new BufferedOutputStream(
    new FileOutputStream(
    ("filename")));
    and then closing by:
    out.close();
    How do I go open it back up again later? What I'm looking for is something along the lines of out.open(); which is what I would expect the command to be but it's not. I have several files for output so I don't want to keep them open throughout the program which is how I have it right now. Thanks for any help!

    When PrintStream.close() is called, it flushes itself and calls the underlying stream's close method - here a BufferedOutputStream. When BufferedOutputStream.close() is called it also flushes itself and calls the underlying stream's close method - here FileOutputStream.
    The API doccumentation for FileOutputStream.close() says:
    "Closes this file output stream and releases any system resources
    associated with this stream. This file output stream may no longer be used for writing bytes."
    So thats it.
    Hope this helps.
    Thanks,
    Binil

  • Opening and closing config files as a binary file but using the config VI's to sort and Perce them.

     I was told this can be done any one know how?

    Perce?  Does that mean Parse?
    Where did you here that this can be done?  Can you give some more details so we know what it is you are trying to do?

  • PDF files opening and closing slowly in Acrobat version 9.5.2.

    I am running Acrobat 9.5.2.  Last week our server died at work and we converted to a new one.  Since then pdf files have been opening and closing very slowly, sometimes taking 15+ seconds to close.  Strangely enough, if you open and close several in a row then they usually open and close quickly with some exceptions, but if you wait 10+ seconds and then try to open or close one it takes forever.  This happens whether or not the machine is connected to the server.
    I tried to do a repair, however it said that it could not connect to the my documents folder at the old server location.  When I originally installed Acrobat, it was done through my University and not while I was even connected to my work server, so that is confusing to me.  Please help, as I use pdf's constantly and this is really slowing me down.

    It doesn't seem like an Acrobat problem per se but a problem with they way your computer is configured to reach the new server. Perhaps you need to have someone come and look at how your computer is configured to reach the new server.  It could also be a problem with how the university configured their server. Server issues are something that cannot easily to diagnosed remotely.

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Combine supported files is not automatically opening and closing source applications?

    On my Vista 64 machine, suddenly, the "Combine supported files in Acrobat" has begun malfunctioning. Instead of automatically opening and closing the source application (such as MS Word), Acrobat opens the application and then asks to save a new PDF file for each source file and stalls out the conversion. This problem is not happening on my Win XP machine. I have used the 'Repair Acrobat Installation' function but the problem is not corrected.
    Thanks for any suggestions.

    Just to close out this thread, the bug was fixed with the latest version of Acrobat Pro Extended (9.3.3).

  • Outlook 2013 are not opening and showing pst files are not closed properly

    Hi
    Outlook 2007 has stopped working and showing close the program. Again,we re-started then outlook 2007 and it has opened and taken the backup of pst files in a separate hard drive.
    The pst file was repaired in scanpst.exe and again i have tried to put the pst file back in outlook 2007.It was hanging and suddenly i have uninstalled 2007 and started installing outlook 2013.
    2013 applications like word,excel,power point are opening and outlook 2013 are not able to open and showing pst files were not closed properly.
    Again i have un-installed and re-installed the outlook 2013.still we are not able to open the outlook.
    Need your support at the earliest to fix the issue.
    Thanks

    Hi,
    What's the .pst file used for? Archive? Or you set up a POP3 account and want to import the emails from the .pst file?
    Another question, you mentioned you installed Outlook 2013 and it didn't open either. Was this from the beginning right after you installed Outlook 2013, or after you did something such as create a new Profile, set up a new account and tried to import the
    .pst file?
    Kindly answer my questions so I can understand the situation better.
    I've seen some of this issue caused by the anti-malware software, check your anti-malware software to see if it's trying to interfere with Outlook - things like real time email checking can sometimes cause these kinds of problems. To troubleshoot, we can
    simply disable the anti-malware software temporarily to see the result.
    Regards,
    Melon Chen
    TechNet Community Support

  • TS3212 ipad typing and opening and closing files on it own

    ipad typing and opening and closing files on it own. how is this fixed

    We tried that - it didn't work. We have phoned the nearest Apple store, where we bought the tablet. I see another 125mile excursion in our near future.
    PS- When we phoned Apple support, we struggled to explain ourselves to a call center employee who simply could not understand American English. Apple, many large companies stopped using call centers in Mumbai because of the language difficulty - you should too.

  • Reg: Open and Closed Activities in DTR

    Hello Guru's,
    I am confused with the Open and Closed Activities in DTR, What are the significance of these activities?
    And when does an Open Activity changes to Closed Activity?
    And why does an Empty Open Activity gets created?
    How does the Open Activities effect the Performance of the system?
    In NWDS what is the significance of the Public Part and the dcdef xml files?
    Please explain and if possible send the links to better understand these? I tried searching for info but with no luck.
    Appreciate the Help.
    Thanks & Regards,
    Pramod

    Dear Pramod,
    Activity in general can be considered as the wrapper of your changes.
    While working in NWDI, any modification that you perform on your source code must be associated with an Activity.
    Some Definitions:
    Client DTR: Represents the Local Track file system present on you local machine, where Checked-out a desired code from Server DTR
    Server DTR: Represents the Central Repository present on the server, where your source code is checked-in.
    Open Activities
    These are the activities that are not yet checked-in to Server-DTR, and they represent the Open Version.
    Exmple:
    1) Suppose you have made some modification in "File A" which is associated in Activity-1
    2) When you open the DTR Perspective in your Developer studio, you will be able to see all the changes that you have associated in the Activity-1, this DTR-perspective of your NWDS is also termed as Client-DTR.
    3) But, when you open the Server-DTR in DTR Web interface, you will not be able to see the same file structure that is present in your client DTR, it will not contain the changes that you have incorporated in Activity-1.
    4) The changes present in Activity-A are not available to any other developers, even if you try to use the same developer ID and load the same track, the activities are still said to be purely Local.
    Closed Activities
    These are the activities that are already Checked-in to Server-DTR and they represent Closed Version.
    Example:
    1) In the same example explained above assume that we now Check-in the Activity-1.
    2) Now, if you open the Server-DTR in DTR Web Interface, you will be able to see the same file structure that is present in your Client-DTR.
    3) Now the changes that were present in Activity-A are also available to other developers too.
    Open Activity and Performance
    1) Open Activities create a temporary entry point reference on the Server DTR you can serach for open activities in Secer DTR web interface, every single activity occupies space on your local machine. So it may affect the performance only if the activity count is very high.
    2) In the local file system, the meta data is stored in the .dcdef file in the _comp
    subfolder.
    3) The meta data is stored in the .dcdef file, every public part has its own meta data file. They are located in the def subfolder of the component and have the fileextension pp.
    Every component (DC) is defined by a set of files, stored and versioned together with the
    component in the repository.
    u2022 A file with the reserved name .dcdef stores the basic attributes such as name,
    description and component type, the parent component (if there is one), a list
    of child components (if there are any), a list of dependencies, links to the component
    sources, and the access control list. The .dcdef file must be stored directly
    in the _comp folder.
    u2022 The folder _comp/def contains one file for each public part of the component,
    which carries the name of the public part with the extension .pp. This file contains a list
    of the development objects belonging to the public part and an access control list for
    this public part.
    Both .dcdef and .pp files are stored in an XML-based format; you can display them in the
    content display of the Repository Browser or with any text editor. However, this is
    not necessary. To create and edit these files, use the component tools of the SAP NetWeaver
    Developer Studio.
    In exceptions, you can manually repair the .dcdef or a .pp file of a component.
    Note that direct manipulations are dangerous and can render a component
    unusable.
    I hope you will get a clear picture now.
    Regards,
    Shreyas Pandya

  • Open and closed hand cursors

    I have a drag image application and I wanted to use the open and closed hand cursors to move the image about. It seems there is no easy way of accessing these in Java. After searching for cursor names etc.. I decided to hard code the cursors from the .gif image. Also I didn't want the .GIFs as files as this adds to loading problems so I ended up using arrays of pixels that took a little while to enter.
    I'm giving you the code if you ever need to use it as I typed it in and wouldn't want anyone else to have to do the same.
    int curWidth=32;
                   int curHeight=32;
                   int curCol;
                   Image img;
                   int x,y;
                   int closed_black[] = { 6,5,7,5,9,5,10,5,12,5,13,5,5,6,8,6,11,6,14,6,
                             15,6,5,7,14,7,16,7,6,8,16,8,5,9,6,9,16,9,4,10,
                             16,10,4,11,16,11,4,12,15,12,5,13,15,13,6,14,14,14,
                             7,15,14,15,7,16,14,16,0};
                   int closed_white[] = { 6,4,7,4,9,4,10,4,12,4,13,4,5,5,8,5,11,5,14,5,15,5,
                             4,6,6,6,7,6,9,6,10,6,12,6,13,6,16,6,4,7,15,7,17,7,
                             5,8,17,8,4,9,17,9,3,10,5,10,15,10,17,10,3,11,17,11,
                             3,12,16,12,4,13,16,13,5,14,15,14,6,15,15,15,6,16,
                             15,16,7,17,14,17,0};
                   int closed_whiteruns[] = {6,13,7,15,7,15,5,15,5,15,5,14,6,14,7,13,8,13,8,13,0};
                   int open_black[] = { 10,3,11,3,6,4,7,4,9,4,12,4,13,4,14,4,5,5,8,5,9,5,12,5,
                             15,5,5,6,8,6,9,6,12,6,15,6,17,6,6,7,9,7,12,7,15,7,16,7,18,7,
                             6,8,9,8,12,8,15,8,18,8,4,9,5,9,7,9,15,9,18,9,3,10,6,10,7,10,
                             18,10,3,11,7,11,17,11,4,12,17,12,5,13,17,13,5,14,16,14,6,15,
                             16,15,7,16,15,16,8,17,15,17,8,18,15,18,0};
                   int open_white[] = {10,2,11,2,6,3,7,3,9,3,12,3,13,3,5,4,8,4,10,4,11,4,15,4,
                             4,5,6,5,7,5,10,5,11,5,13,5,14,5,16,5,17,5,4,6,6,6,7,6,10,6,
                             11,6,13,6,14,6,16,6,18,6,5,7,7,7,8,7,10,7,11,7,13,7,14,7,17,7,
                             19,7,4,8,5,8,7,8,8,8,10,8,11,8,13,8,14,8,16,8,17,7,19,8,3,9,6,9,
                             16,9,17,9,19,9,2,10,4,10,5,10,19,10,2,11,18,11,3,12,18,12,4,13,
                             18,13,4,14,17,14,5,15,17,15,6,16,16,16,7,17,18,17,7,18,16,18,
                             8,19,15,19,0};
                   int open_whiteruns[] = {9,14,8,17,4,16,5,16,6,16,6,15,7,15,8,14,9,14,9,14,0};                    
                   int pix[] = new int[curWidth*curHeight];
                   for(y=0; y<=curHeight; y++) for(x=0; x<=curWidth; x++) pix[y+x]=0; // all points transparent
                   // black pixels
                   curCol=Color.black.getRGB();
                   int n=0;
                   while(closed_black[n]!=0)
                        pix[closed_black[n++]+closed_black[n++]*curWidth]=curCol;
                   // white pixels
                   curCol=Color.white.getRGB();
                   n=0;
                   while(closed_white[n]!=0)
                        pix[closed_white[n++]+closed_white[n++]*curWidth]=curCol;
                   // white pixel runs
                   n=0;
                   y=7;
                   while(closed_whiteruns[n]!=0) {
                        for(x=closed_whiteruns[n++];x<closed_whiteruns[n];x++)
                             pix[x+y*curWidth]=curCol;
                        n++; y++;
                   img = createImage(new MemoryImageSource(curWidth,curHeight,pix,0,curWidth));
                   closedhandCursor = Toolkit.getDefaultToolkit().createCustomCursor(img,new Point(5,5),"closedhand");
                   for(y=0; y<=curHeight; y++) for(x=0; x<=curWidth; x++) pix[y+x]=0; // all points transparent
                   // black pixels
                   curCol=Color.black.getRGB();
                   n=0;
                   while(open_black[n]!=0)
                        pix[open_black[n++]+open_black[n++]*curWidth]=curCol;
                   // white pixels
                   curCol=Color.white.getRGB();
                   n=0;
                   while(open_white[n]!=0)
                        pix[open_white[n++]+open_white[n++]*curWidth]=curCol;
                   // white pixel runs
                   n=0;
                   y=9;
                   while(open_whiteruns[n]!=0) {
                        for(x=open_whiteruns[n++];x<open_whiteruns[n];x++)
                             pix[x+y*curWidth]=curCol;
                        n++; y++;
                   img = createImage(new MemoryImageSource(curWidth,curHeight,pix,0,curWidth));
                   openhandCursor = Toolkit.getDefaultToolkit().createCustomCursor(img,new Point(5,5),"openhand");
                   setCursor(openhandCursor);you need to define openhandCursor and closedhandCursor with your other cursor definitions (I made them default to start with) and then just use setcursor as normal. There must be an easier way to do this!
    p.s. thanks to Martin Zvarik for the original code here: http://www.jguru.com/faq/view.jsp?EID=9958

    Hi,
    you can use the same query...Also check the new code after the select..
    SELECT BUKRS BELNR GJAHR <b>BSTAT</b>
    FROM BKPF
    INTO TABLE T_BKPF
    WHERE BUKRS = P_BUKRS
    AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
    AND BLART = P_BLART
    AND CPUDT IN SO_CPUDT " Selection screen input.
    IF NOT T_BKPF[] IS INITIAL.
    SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
    INTO TABLE T_BSEG
    FOR ALL ENTRIES IN T_BKPF
    WHERE BUKRS = T_BKPF-BUKRS
    AND BELNR = T_BKPF-BELNR
    AND GJAHR = T_BKPF-GJAHR
    AND EBELN IN SO_EBELN " selection-screen input
    ENDIF.
    LOOP AT T_BKPF.
    Parked
      IF T_BKPF-BSTAT = 'A'.
        WRITE: / T_BKPF-BELNR , ' - Parked'.
    process the next record.
        CONTINUE.
      ENDIF.
    Check for Open / Closed.
      LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
                                   AND      BUKRS = T_BKPF-BUKRS
                                   AND      GJAHR = T_BKPF-GJAHR
                                   AND      AUGBL <> ' '.
        EXIT.
      ENDLOOP.
    If the return code is 0 then the document is cleared..
      IF sy-subrc = 0.
        WRITE: / T_BKPF-BELNR , ' - Closed'.
    Else the document is not cleared.
      ELSE.
        WRITE: / T_BKPF-BELNR , ' - Open'.
      ENDIF.
    ENDLOOP.
    Thanks,
    Naren

  • Open and closed cursor

    I have some doubts/questions .
    What is the difference between open and closed cursor?
    Are library cache locks same as parse locks?
    What is the difference between latch and mutex?
    I would be grateful if experts could answer these questions.
    Regards

    Almost correct. The terminology is however nor correct.
    Simplistically:
    The SQL engine receives a SQL. It attempts a soft parse first. This means looking for an existing cursor in the Shared Pool with the same SQL. This existing cursor can be in use by other sessions. It does not matter - if that cursor is in used (opend by other sessions), or not. It may not be in use at all and simply sitting there in the cache. If such a cursor is found, it is used for that session's SQL - and that session gets a cursor handle (reference/pointer) to that existing cursor.
    If the SQL engine does not find an existing cursor to use, it needs to create a brand new cursor in the Shared Pool. This is a hard parse. Again, the session receives a cursor handle for that new cursor created.
    And that is it.
    You now need to decide how to use that cursor handle. The cursor itself is a program. You have a handle to execute that cursor program. Via its bind interface you can input data to this cursor program. Then execute it and receive (fetch) output of that cursor program.
    So the ideal is to re-use the cursor handle again and again.
    Basic example: the following is not optimal as the same cursor is opened and closed, opened and closed, for each read from the file. A lot of soft parsing results.
    while not-eof( filehandle )   // read data from a file
      read file data into var1, var2
      open cursor for 'insert into testtab values( :1, :2)'   // create a cursor
      bind cursor :1 = var, :2 = var2  // bind values to cursor (for insert)
      exec cursor // do SQL insert
      close cursor 
    end whileThis is a lot better. A single cursor is used and executed again and again:
    open cursor for 'insert into testtab values( :1, :2)'   // create a cursor
    while not-eof( filehandle )   // read data from a file
      read file data into var1, var2
      bind cursor :1 = var, :2 = var2  // bind values to cursor (for insert)
      exec cursor // do SQL insert
    end while
    close cursor  In this case a single soft/hard parse - and the client uses that cursor handle to execute that cursor (insert data) program again and again.

  • Opening and closing balances

    Hi sapgurus
    I need a report with similar to MB5B at particular posting date with opening and closing balances but I am unable to download the report to excel the data with MB5B tranasaction.Is there any similar transaction with same output values which can be easily transported to excel from Sap.
    Thanx

    Hi,
    I tested in ECC6.0 and i could able to do so, you try as mentioned below.
    In the output screen of MB5B, goto menu details > click on list > select save > select file > select spreadsheet. Here you can save tthe output in excel format.
    Regards,
    Prabu

  • Opening and closing Access database in a loop causes an Error.

    I am loading test conditions from an Access DB in a multiple nested loop. The loops successively drill into the DB. ei Temperature, Humidity, Power. Consequently the DB is opened and closed numerous (2000) times. The Errors returned are(-2147467259) Unspecified Error or (2147024882) System Resources low. I have disabled result recording in the edit sequence properties dialog. I do see a constant memory consumption, but of 128MB, it never gets below 40MB. I have enclosed the example sequence file I am using.
    Attachments:
    Open-Close.seq ‏35 KB

    Jacy,
    "jacy" wrote in message
    news:[email protected]..
    > I am loading test conditions from an Access DB in a multiple nested
    > loop. The loops successively drill into the DB. ei Temperature,
    > Humidity, Power. Consequently the DB is opened and closed numerous
    > (2000) times. The Errors returned are(-2147467259) Unspecified Error
    > or (2147024882) System Resources low. I have disabled result recording
    > in the edit sequence properties dialog. I do see a constant memory
    > consumption, but of 128MB, it never gets below 40MB. I have enclosed
    > the example sequence file I am using.
    I've seen problems with OLEDB (which I assume TestStand used behind the
    scenes) with Access and SQL where rapid opening/closing of the sam
    e source
    (database) can generate errors. I don't know for sure, but I assume that
    the changes from the last close are not fully propogated before the next
    open is processed.
    Getting back to TestStand, if all the tables you're querying are in the same
    database, then you should just open the database once at the beginning and
    close it at the end. Then do seperate table open/closes between the
    database open/close.
    Bob.

  • Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

    Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

    Assuming you do not have access to the "original" video/project and the YouTube video is the only copy, there is a method. Try "YouTube Downloader" which is a free software that allows you to download clips from YouTube as .mp4 files. You can then edit with Premiere, and re-encode again for upload to YouTube. Just keep in mind that you are re-compressing the video so there will be some quality loss. The better the quality of the original, the better the copy will hold up.
    Thanks
    Jeff Pulera
    Safe Harbor Computeres

Maybe you are looking for