Init Load showing in yellow state.
Hi all,
I am trying to do init for SRM data source to ODS object.
The init load is showing yellow state (0-0 records).
There is no data available in SRM related to this data source.
Can anyone please tell me why it is in yellow state instead of green.
Thanks
S VR.
Hi S VR,
In the monitor screen go to the Status Tab > click on the lights next to Total > Make it Red and save > the system will prompt a couple of messages, say Yes to them. Then you can Manual Update. Once all packages are done (green), then again Status tab > click onthe lights next to Total > Delete Statsu; back to request status > Save. The request should now be green.
else
try repair full request option it can help you..
Hope this helps...
Assign points if helpful...
Regards,
NR
Edited by: N R Pradeep Reddy on Apr 14, 2008 6:14 AM
Similar Messages
-
Load step in Yellow state even after completion
Hi people:
I have a situation here with aprocess chain.
When the process chain is triggered,there is a load step which stays
in yellow even after the load completes. We tried to push the step
forward,but the chain wont progress. So,we had to do the rest of the
steps in the process chain manually.
Why does this hangover step happens in the process chains?
Can some one give a solution to this situation, so that we don't have
to do the steps manually everytime the chain is struck at the step?
Any inputs are appreciated.
Thank you.Hi,
Check the status of the Process Variant in RSPCPROCESSLOG table. If the status of the variant is not 'G' then the process will not move to the next step though the loads complete succesfully.
In this case you have to change the status to 'Completed' (G)manually.
This could be done using the Function Module 'RSPC_PROCESS_FINISH'.
Provide the below details in the FM
1) I_LOGIN - Login ID of your process variant (you can find this in RSPCPROCESSLOG table)
2) I_TYPE = CHAIN
3) I_VARIANT = Your Proces Chain variant (Optional)
4) I_INSTANCE = Double click on the object which was struck and click on Backg tab. Copy paste the instance.
4) I_STATE = G.
Hope this would resolve your issue.
Regards,
Anil Pragada -
FI_AR_4 Infosource(standard) Init Load
Hi Gurus,
I have an issue regarding INIT load for FI_AR_4 Infosource.It shows yellow status though R/3 has data.I got the records into BW using full upload.
To enable DELTA upload, I Intialised the DELTA "<b>without data transfer</b>".It gives me an error that I cannot Initialise once again after FULL upload.
Could you please help me to solve this.
Regards,
VenkatThat is true with the GL if you are using the GL. Once the GL is initialized, AR and AP have to follow that, if GL is not being used, don't worry about it.
Check you ODS status (change -> ODS...). Look at the settings and make sure the "update status automatically" is set, otherwise the system waits for you to turn it green manually.
/smw -
Datasource 0UC_SWTMSGDATA - request remains in yellow state
hi all,
we are using the datasource 0UC_SWTMSGDATA to extract message data for the switch documents.
every time we scheduled the infopackage to load data into sap bi, the datasource extracts all data records to the bi.
but at the end, when all records arrived at bi, the request remains in yellow state.
do you have the same problem? what's the reason?
we are already using the datasource 0UC_SWTDOC, it works fine.
kind regards,
phil
Edited by: Philipp Südfeld on Jul 8, 2011 4:49 PMHi,
You have to check the job status in SM37 in R/3 system. If it shows "Active mode", then you will be getting Yellow color in BW. You may have to wait till the job gets finished in R/3.
Sometimes, transferring I-Docs take time.
Regards,
Suman -
Process Chain load step in yellow status
We are having a process chain with a load step.The load step is run with init with data transfer.
The load step is scheduled for the next time without changing the option to delta update.So the load step turned yellow with the background job log stating that delete the init Request ID.
The process chain is scheduled for several times but the load steps are all yellow.I initialized with data transfer and then to delta update.
All the requests in data targets are green.But all the load steps are in yellow.please let me know how to make it green.I tried to change the status of the load step to green manually using the function module rsps_process_finish,but the status is not changing.
Please help me out.Thanks in advance.Hi,
From the Cube Manage > Environment > Automatic req processing > Chk Quality status to ok , chk this option if it is not done.
this should reslve the issue.
-Vikram -
Request in Yellow State in Delta update cube.
Dear Exprts,
In request , no. of transfered record is 73260 & added record in cube 73212 with yellow status. Everything O.K. but in Data package 2 in update rule it has tranfered only 16247 out of 16295. ( this is same diffrence of number of records as in cube ) .
PSA request is also in yellow state.
Regards,
Anand Mehrotra.Dear experts,
Thanks for reply.
In R/3 & BW , it showing status job is finished . But PSA request is also yellow state.
In transfer rule ( Data package 2 ) no of tranfered record is equal to added . But Update rule it is different green status.
how to find out these records in update rule.
Regards,
Anand Mehrotra. -
PSA Request struck in yellow state if no data is available
If there is no data available in the source system then the PSA reuest in the Datasource is not updated as sucess rather it is struck in yellow state.
However, if there is data available then there is no issue.
We are running a delta load through a Process chain and daily we have to manually set the satus to sucess for the chain to continue its execution.
Any help would be appreciatedTime out time(TOT)
This settings are useful when we have huge data and load will take more time. in general default time out time maintained some number(ex 7hours).
when that time was crossed we get time out time error for info pack. in that case we need to increase the wait time for info pack.
Treatment for warning(TFW) - if we receive any warning during the load in default request will be red. in generally warnings are allowed. once you check what is the warning, after that accordingly warning message you can make request to green. -
How to see the init load in bi 7.0
hello frnds,
In bi 7.0 when v load data it show the full load and delta load option only,,so my question is, if delta load r there then definately init load also avilable,so where is that init load,,plz guys tell me where is that option,,
2nd question is about compression in bi 3.5,,after loading data into infocube when i do compression it ll not work,,why i dont know ,,plz help me
Thanks
RosyHi Rosy,
Init with data load is Full upload + Delta Enables. Once you run this it will fetch entire records from the Source, delta will be automatically enabled and next time onwards only delta will be coming to BW.
Before you can request a delta update, you must first initialize the delta process.Delta initialization can only be simulated for DataSources from SAP source systems if the DataSource supports this.
I hope the below link will be helpful,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0db2280-8242-2e10-b6a5-86a46d0feb25?QuickLink=index&overridelayout=true
Regarding compression, please check the below link,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c035d300-b477-2d10-0c92-f858f7f1b575?QuickLink=index&overridelayout=true
Thanks,
Vinod -
Displays showing a yellow checkerboard pattern.
2010 Mac Mini, 10.7.3, dual DVI displays. - Several times a day, it shows a yellow checkerboard pattern in some windows. So far, it's appeared in Chrome, Entourage and Excel 2008. The problem occurred both before an after we upgraded the RAM. These checks appear sometimes when scrolling, sometimes while waiting for a web page to load. They go away generally with the same actions... clicking, scrolling, etc.
We have lots of other users, none of them complain of this problem.
Photo attached:
Anyone have any thoughts?Is this a Mini with Intel Integrated Graphics, or a real Graphic card?
If the former it could easily be the RAM, if the later...
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/ -
BIG Question regarding INIT Loads..I am scratching my head for past 2 days
Hello All,
I have one big question regarding the INIT load. Let me explain you my question with an example:
I have a datasource say 2LIS_02_ITM for which I ran the setup tables on JAN 2008. The setup table is filled with say 10,000 records. After that we are running Delta loads everyday till today (almost 30,000 records). Everything is going fine.
Imagine I lost a delta (delta failed and did'nt I do a repeat delta for 3 days, by then next delta came), Hence I am planning to do a Init load again without deleting / filling the setup tables. Now my question is :
1) Will I get the 10,000 records which got filled initially in the setup tables or will I get 40,000 records (that 10,000 + 30,000 records)
2) If it bring 40,000 how is that possible as I hav'nt filled the setup tables?
3) Is it each time I need to fill the setup tables to start the Init load.
Waiting for your guidance.........Yes...to answer your question
But...agin I will suggest not to go by that method. Only one delta had failed so why do you want to wipe away the timestamp of the last init just becasue of 1 delta failure? it is possible to correct it
First of all i hope you have stopped the process chain or put a hold to Delta jobs
Now, To answer your doubt, about the status red ..See you mark the status red in each of the the data target before delting the failed request from there (I usually do not just delete the requests frm data targets - I mark them red and then delte it to be safe).
Do not forget to delete subsequent requests afterthe failed delta (agin I always mark them red before doing so)
Regarding the actual reuest itself...you need not mark it red in the monitor..You have got to correct this request and successful - it will automatically turn green.
If after successfully correcting the request, it still does not turn green, you can set qm status green. The next delta will recognize this a successful request and bring in the next delta (this happens in cases where you have the infopackage in a process chian when it shows green because subsequent processes were not completed etc).
Let me know in case you have any questions. -
I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!
you launch QT then go to its REGISTRATION
-
Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks
In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section. -
My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise
Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
tt2 -
Hi All,
By using the custom program, I am creating the IDOC and after that I am running the program "RSEOUT00".But still IDOC is in Yellow state.
If run the IDOC in WE17 Transaction code, IDOC state is getting turned into Green state.
Could you please tell me what could be the problem.Why it is Yellow state.Hi,
We faced the same problem .
Chek your Coneection string in SM59. Reset IP address with host name and system number and try again.
Check response time in SM59.
Check SM58 if any error is there in RFC after idoc processing.
Salil ... -
since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?
I've also had the same issues, after upgrading to IOS 6.0, the apps in my iPhone 4 were crashing and the battery life run out very fast.
The only solution worked for me was to remove all mail accounts (Exchange/Gmail) from my iPhone (in settings) and then add them back.
The crashing were stopped! also the battery was back to normal.
I found the solution by first looking at the crash logs (in IOS 6). you can find them at Settings -> General -> About (at the bottom of the About menu you will find the option that opens the logs).
There i saw many logs about Low Memory crash. 99% of the logs were pointed that the largest process (use the most memory) during the crashes is "dataaccessd".
I search in the web and found that this process is a deamon process that reponsible the Mail accounts (like Exchange/Gmail) and contancts list.
I've installed the app "System Status - activity monitor" which shows important system info like CPU usage, Memory usage and running processes.
Before apply my solution (deleting the mail accounts) i saw that the CPU usage was very high which consume the battery very fast. Also i saw that the memory (RAM) was run out.. which probably what cause the crashing..
After deleting the mail accounts (at Settings -> Mail, Contacts, Calendars) i check again with the System Status app, and saw that the memory and CPU were back to normal.
Adding the mail accounts back, still everything work ok
Hope this solution will help you too,
Enjoy!
Maybe you are looking for
-
i have three apple aqccounts and want tp delete one. how do i do this w/o knowing the password (my daughters)?
-
[SOLVED] Freebasic on AUR
Hi, is anyone able to download freebasic from AUR? It appears to be the only way to install freebasic on this system... (it says target not found) Last edited by onewarmslime (2013-08-08 19:40:21)
-
The example below ilustrates the problem I'm having. What I want to do is run an Executable, Wait until done. But the issue I have is when I run the wait until done with the flag to True the output is blank until it completes. When I runn it with the
-
Customer Services Refused to Take my Complaint
I am so angry that I have been pacing the floor in my home!!! BT are a total disgrace. We moved to our home 4 years ago and was given my phone number by Virgin and as usual this number had been used by someone else. We immediately started getting c
-
New User - need help with - 403: forbidden
Trying to download Nav4all.com on my pearl 8130 and I keep on getting this message on my phone. 403: forbidden Access to text / vnd.sun.j2me.app-descriptor MIME content type(s) denied tried to download weather network as well and got the same messag