Init.ora file changes

Hi,
I changed the init.ora file for some reason and I have applied some patches in OS(microsoft windows 2003 server) and i noticed in the init.ora file that all changes in the init.ora file gone !!
Can someone explain me, what was the reason behind that ?
Thanks in advance.

Hi,
<humor>You have to check urgently for the green little pfile changer halfling!</humor>
Seriously.. did you do both at the same time? If so... are you sure you save the init file? Cause there's no way such changes are rolled back except if you did not saved the file... or restored an old version of your pfile!
Regards,
Yoann ;-)

Similar Messages

CHANGING THE DIRECTORY OF INIT.ORA FILE

Hi,
I have a database in 8i. Can I change the diredtory of init.ora file ? If yes how ?
it is in d:\oracle\ora8
and I want tu put it in d:\anothrfolder
Many thanks before.

That's what I did , but :
SQL> SHUTDOWN IMMEDIATE
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> exit
Disconnected from Oracle8i Enterprise Edition Release 8.1.7.4.1 - Production
With the Partitioning option
JServer Release 8.1.7.4.1 - Production
C:\Documents and Settings\user>oradim -delete -sid DB1
C:\Documents and Settings\user>oradim -EDIT -SID DB1 -PFILE C:\oracle\admin\db1\exp\initdb1.ora
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) Le fichier spÚcifiÚ est introuvable.
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) Le fichier spÚcifiÚ est introuvable.
C:\Documents and Settings\user>oradim -EDIT -SID DB1 -PFILE C:\oracle\admin\db1\exp\initdb1.ora -startmode auto
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) Le fichier spÚcifiÚ est introuvable.
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) Le fichier spÚcifiÚ est introuvable.
C:\Documents and Settings\user>oradim -NEW -SID DB1 -PFILE C:\oracle\admin\db1\exp\initdb1.ora -startmode auto
C:\Documents and Settings\user>sqlplus "/ as sysdba"
SQL*Plus: Release 8.1.7.0.0 - Production on Me Mai 16 12:22:25 2007
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.4.1 - Production
With the Partitioning option
JServer Release 8.1.7.4.1 - Production
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
LRM-00109: could not open parameter file 'C:\oracle\admin\db1\pfile\initdb1.ora'
LRM-00113: error when processing file 'C:\oracle\admin\db1\pfile\initdb1.ora'
ORA-01078: failure in processing system parameters

Changing init.ora file

Hi,
I need to add the utl_file_dir parameter to the init.ora file. Do I need to restart the database for the changes to be effective?
My oracle version is
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production

Akhil N K wrote:
Does the below two statements means the same?No.
1) creating an oracle directory using create or replace directory command This is referring to create a directory object in the database using the create directory command which should be mapping to a valid o/s level directory path.
http://download.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_58a.htm#SQLRF01207
2) adding utl_file_dir parameterThis is referring to the edition of the init file and adding the parameter there .
HTH
Aman....

Parameters in init.ora not changing in DB

Oracle 9.0.0 Redhat 7.2
Trying to set up utl_file_dir in the init.ora file and, although
the entry in the init.ora looks correct (utl_file_dir=/tmp/xxx),
the value for utl_file_dir in sqlplus (show parameters utl)
never sees the value (ie always shows nothing). Same with other
params in the init.ora. If I rename the init.ora file, the DB
doesn't start, so I'm changing the correct file.
Maybe Oracle is finding something it doesn't like in the
init.ora file and aborting reading the file??
Is there a way to see what oracle's doing with the init.ora file
as it loads?
Thx Martin ([email protected])

There is a new feature with 9i that you can change init.ora
parameters without bouncing the instance, these parameters are
store in a file (spfile).
See the documentation about this feature.
Thomas

Init.ora file parameter 'processses' not working

When I change the number of processes in my init.ora file from the default of 30 to 200, I get an error when accessing from SQLPlus that Oracle cannot be found. I run Oracle 8.1.6i on a Solaris v7 platform. Any suggestions???

I think your database could not "be found"
'cause it isn't up.
Change the init.ora file parameter 'processses' to 'processes' and restart
the database.
Oracle refuses starting up, if there are
mistyped parameters in init<SID>.ora.
C.Scholten

Moving init.ora file

Hi,
I'm in 8i on WinXP. By doing following I move init.ora file :
SQLPLUS>shutdown immediate
user>oradim -EDIT -SID DB1 -PFILE C:\oracle\admin\db1\exp\initdb1.ora -startmode auto
Now if I start the service, it is OK and DB would be open. but if I issu startup I have errors :
SQL> startup
LRM-00109: could not open parameter file 'C:\oracle\admin\db1\pfile\initdb1.ora'
LRM-00113: error when processing file 'C:\oracle\admin\db1\pfile\initdb1.ora'
ORA-01078: failure in processing system parameters
Even if registry fir pfile key is changed, it is with new position of init.ora file, but startup command line look for ancient init.ora file, Why ?
I should use :
SQL> startup pfile='C:\oracle\admin\db1\exp\initdb1.ora'
Any solution ?
Many thanks.

we are in 8i :
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0
ID REG_SZ 0
ORACLE_GROUP_NAME REG_SZ Oracle - OraHome81
ORACLE_HOME_NAME REG_SZ OraHome81
ORACLE_HOME REG_SZ C:\oracle\ora81
ORA_REPRMAN_AUTOSTART REG_EXPAND_SZ TRUE
ORA_REPRMAN_PFILE REG_EXPAND_SZ C:\oracle\admin\reprman\pfile\init.ora
ORA_REPRMAN_SHUTDOWN REG_EXPAND_SZ TRUE
ORA_REPRMAN_SHUTDOWNTYPE REG_EXPAND_SZ i
ORA_REPRMAN_SHUTDOWN_TIMEOUT REG_EXPAND_SZ 30
NLS_LANG REG_SZ FRENCH_FRANCE.WE8ISO8859P1
ORACLE_HOME_KEY REG_SZ Software\ORACLE\HOME0
SQLPATH REG_SZ C:\oracle\ora81\dbs
ORACLE_BASE REG_SZ C:\oracle
MSHELP_TOOLS REG_SZ C:\oracle\ora81\MSHELP
RDBMS_CONTROL REG_SZ C:\oracle\ora81\DATABASE
RDBMS_ARCHIVE REG_SZ C:\oracle\ora81\DATABASE\ARCHIVE
ORACLE_SID REG_SZ reprman
ORA_DB1_AUTOSTART REG_EXPAND_SZ TRUE
ORA_DB1_PFILE REG_EXPAND_SZ C:\oracle\admin\db1\exp\initdb1.ora
ORA_DB1_SHUTDOWN REG_EXPAND_SZ TRUE
ORA_DB1_SHUTDOWNTYPE REG_EXPAND_SZ i
ORA_DB1_SHUTDOWN_TIMEOUT REG_EXPAND_SZ 30

Init.ora file???

Hi
I have a database "Xdb" running on winNT.
My "ora_home\database" folder contains the following files:
oradba.exe
OraDim.exe
PWDXdb.ora
SNCFAXDB.ORA
SPFILEXDB.ORA
and, ora_home\admin\xdb\pfile\init.ora_242323.
Well, as far as my knowledge is concerned, to start a database, we need a "init.ora" file. But I don't see any init.ora file in the above said folders, and how come the databas is getting started automatically and from where it reads the "init.ora" file when it is not present?
Explain me pls.
TIA
Aqueel.

Hi,
If u want to create a init.ora file u can do the following:
create pfile='path' from
spfile;
This will generate a pfile(init.ora) which can be read.
If you want to make any changes, u can do that and you can replace the spfile in the same way. Just change the order in the above statement. Generally, the parameters can be changed with the alter system command. This explaination is just to kill your curiosity!!

Creating two controlfiles in an auxiliary init.ora file

How can two controlfiles be created in an auxiliary init.ora file ?

for asm you can connect as asmcmd (change ORACLE_SID/HOME first) and copy controlfile (don'r forget, shutdown, modified init.ora, and startup with init.ora):
ASMCMD> cp <controlfile at disk> <controlfile at asm>
i.e.:
ASMCMD> cp '/tmp/control01.ctl' '+DATA/controlfile/control01.ctl';
ASMCMD File Management Commands
more about asm --> Contents
if you are new into oracle, you should read this first --> Contents

How to find current init.ora file

I have 2 issues:
Issue 1:--
I have some 4-5 init.ora file which are created by some other user and facing difficulties to find exact init.ora which is used by my oracle 9.2 database. same thing for spfile.
Is there any way so that i can find the currently use init.ora file?
Issue 2:
I want to change init.ora file parameters for the oracle9.2(siebel).
Presently default it is showing optimizer_mode=CHOOSE
I have tried to change to RULE but not refelecting after database restart.
at session level i can modify but i want permanent change and for thius i tried with
user SYS as SYSDBA with
ALTER SYSTEM SET optimizer_mode=RULE;
but getting following Oracle erroe message
ORA-02096 specified initialization parameter is not modifiable with this option
Cause: Though the initialization parameter is modifiable, it cannot be modified using the specified command.
Action: Check the Oracle9i Database Administrator's Guide for information about under what scope the parameter may be modified
How we can make changes in init.ora file?
Regards
Junu

As far as I know, there's no possible way to find out which parameter file was used to start instance. And, even if it was, I don't really see much sense in it because parameter file is a client-side file, and usually it required to start up Oracle instance remotely.
In principle, parameter files are obsolete beasts, consider using server parameter file (SPFILE) instead. And, for SPFILE, it's pretty easy to find out its location:
SQL> show parameter pfile
NAME                                 TYPE        VALUE
spfile                               string      %ORACLE_HOME%\DATABASE\SPFILE%
                                                 ORACLE_SID%.ORAAs for your ORA-02096 error, you have two opportunities to resolve it.
If you decided to use SPFILE, create one (for example, using CREATE SPFILE FROM PFILE command), start your instance with SPFILE then issue:
ALTER SYSTEM SET optimizer_mode=RULE SCOPE = SPFILE;and bounce your instance.
If you still wish to use old-style parameter file, you have to add corresponding setting into that file manually (it's a plain text file in fact) and restart instance.
Regards.
P.S.: Why do you want to enforce rule-based optimizer by the way?...

Can we determine path of my INIT.ORA file from data dictionary views.

Hello Guru’s
I am new to oracle, My question is for the sake of my knowledge: I work on oracle 10G.
Is there any data dictionary view from where I can get the path of my INIT.ORA file.
Regards,

NewDay wrote:
Hello Guru’s
I am new to oracle, My question is for the sake of my knowledge: I work on oracle 10G.
Is there any data dictionary view from where I can get the path of my INIT.ORA file.
AFAIK , its no. You can check the path from the show parameter command like following,
SQL> show parameter spfile
NAME TYPE
VALUE
spfile string
/u01/app/oracle/product/10.2.0
/db_1/dbs/spfileorcl.ora
SQL>HTH
Aman....

Questions on init.ora file

Hi,
I have some questions on init.ora file. While checking the init file in my system i found that it defines a spfile in a non default location.
The parameter names are like
1) db1.__db_cache_size
2) *._kgl_large_heap_warning_threshold
3) *.sga_target
what do they indicate? I mean what does 'db1.__' , '*._' and '*.' indicate? There are multiple database in the Windows 2003 server and the db version is 10g R1
Regards,
SID
Edited by: SID3 on Jun 29, 2010 5:55 AM
Edited by: SID3 on Jun 29, 2010 5:56 AM

SID3 wrote:
From the discussion i guess the following points
1) db1._ means they are specific to databases.
2) *._ and * means they are used accross databases and chaging it in any of the initfile might affect all? I seriously doubt this.You are mistaken when speaking about database. Bear in mind, a database is not an instance.
* here means this parameter will apply to any instance of that database (if it is in RAC), or to the only one instance of that database (if it is in non-RAC).
Find out more :
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_2013.htm#i2146449
Nicolas.

How to establish a single init.ora file for 3 node RAC under ASM

All,
Our environment is a combination of several different memory sized SUN machines (V880, V490 & 250R).
Setting up a single init.ora file that encompasses each of the nodes memory into the SGA sizing is our desired setup.
Though we have established the file, the question is getting each NODE on the RAC to use that single parameter
file to start its database instead of taking the default init.ora file in the default (asm/dbs) directory.
As we have performed fail-over testing, upon the restart of instances they have restarted with wrong memory
definitions that have hung the nodes when it took more memory then what was available and swap space began
to grow.
Steps to configure and enable this process is what I am looking for.
Thanks
Gerry

Gerry,
Here's what we do. Not sure if it is relevant to your situation ...
(on each node)
$ cat $ORACLE_HOME/dbs/initrac11d1.ora
SPFILE='+DATA/rac11d/spfilerac11d.ora'
(in ASM)
$ asmcmd
ASMCMD> ls -la +data/rac11d
Type Redund Striped Time Sys Name
Y CONTROLFILE/
Y DATAFILE/
Y ONLINELOG/
Y PARAMETERFILE/
Y TEMPFILE/
N spfilerac11d.ora => +DATA/RAC11D/PARAMETERFILE/spfile.267.685170285
The spfile has all parameters, qualified by node where applicable. For example :
$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.7.0 - Production on Wed May 6 19:00:45 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.1.0.7.0 - 64bit Production
With the Real Application Clusters option
SQL> create pfile='/tmp/sb.ora' from spfile;
File created.
SQL> Disconnected from Oracle Database 11g Release 11.1.0.7.0 - 64bit Production
With the Real Application Clusters option
$ cat /tmp/sb.ora
*.archive_lag_target=1800
*.audit_file_dest='/var/oracle/admin/rac11d/adump'
rac11d1.dispatchers='(address=(protocol=tcp)(host=msdbc11-vip)(port=64000))'
rac11d2.dispatchers='(address=(protocol=tcp)(host=msdbc12-vip)(port=64000))'
*.global_names=TRUE
rac11d1.instance_number=1
rac11d2.instance_number=2
rac11d1.undo_tablespace='UNDOTBS1'
rac11d2.undo_tablespace='UNDOTBS2'
Hope this helps,
Steve

How to set UTL_FILE parameter in the INIT.ORA file

Dear all,
How can i set UTL_FILE parameter in the INIT.ORA file.
Also let me know how to create a directory over there.I am new to this area.
Where exactly i can locate these details and create directory.
Regards,
Bala.

post this in database forum

Oracle 11g init.ora file

1) I am a bit confused with init.ora file format in oracle 11g. In addition=
to the usual entries that are prefixed with *.<parameter>, it also has ent=
ries prefixed with <sid>.__<parameter>. I am not able to find an explanatio=
n of these <sid>__ entries from oracle 11g documentation. I am told by a co=
lleague that they are for instance, to cater for multiple-instances databa=
ses. Is that correct?
2) The presence of the <sid>.__ entries confuse me since some parameters ap=
pear in both <sid>__ and *. sections. What if the values for the same param=
eter are different, which one is used by oracle? I guess it's the <sid>.__ =
one?=20
3) In my case the database has only 1 instance, so I guess I can remove all=
<sid>.__ entries and only work with *. entries?
Thanks
Long

Hi,
the entries with double underscore in the spfile that you mention are not new in 11g but also show up in 10g.
They are caused by the background process MMAN (Memory Manager), that is active if you set SGA_TARGET>0 (in 10g) rsp. MEMORY_TARGET>0 (in 11g).
This MMAN modifies the Oracle Memory components like the shared pool and the buffer cache, using performance statistics captured by the MMON (Manageability Monitor) and storing the new size of the component in the spfile in order to make that size persistent through instance restarts.
The prefix of the SID is meaningless in case of a non-RAC database.
Kind regards
Uwe
http://uhesse.wordpress.com

Archivelog Mode / init.ora file

Hi,
Maybe someone can help me out. I am presently trying to set up a dev server that has 3 or 4 databases on it. The first database is installed by the Oracle installation kit. The 2nd one that I am now trying to configure is giving me the following error: Ora-01126: database must be mounted EXCLUSIVE and not open for this operation. I am also setting it up for archiving.
When I do a SELECT * from V$database; the answer comes back that it is in noarchivelog mode. I even edited the init.ora file in both the pfile folder and the ora81/database folder and yet the answer is still the same. I even rebooted it with the same results. I understand that the database is in exclusive mode by default. Does this have anything to do with Parrelizm (spelling). I tried altering the database to archivelog mode but with no results.
Any ideas? Im at a loss.
Thanks for your time.
Al

Hi Al,
try to startup the db with startup mount or startup read only and try
the alter command again.
Normally it should work then!
Tobias

Init.ora file changes

Similar Messages

Maybe you are looking for