Init: smb(5) repository server not running

error message
init: smb(5) repository server not running
Hello guys,
I'm new to Sun OS and would very much appreciate if someone could identify what is the issue here and its possible solution
Background: I was booting up SunOS 10 on my vmware to carry out some tests and suddenly the electicity tripped and my server crashed (along with the just booting SunOS in vmware)
After i restored the electricity, i was trying to boot up the SUN OS again, but it just dosent start the GUI! It asks me for the root password and then just sits about! When i try to start the GUI with a init 6 it displays the error message
Any Help Appreciated

Guys
Sorry for being a DODO!
I've managed to read all the help messages, the helpful Sun OS presented and understood that i could run the command below, which guides me to run further commands and i've managed to resolve the issue! I can see my GUI now! I'm saved!
/lib/svc/bin/restore/repository
Thanks for taking the time to read this.

Similar Messages

Input File Repository Server not running

When I try to access reports I get the following error
Server Error in '/v2' Application.
File Repository Server Input is down.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: File Repository Server Input is down.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80004005): File Repository Server Input is down.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +77
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +218
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +272
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +875
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +52
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(InfoObject infoObject, EnterpriseSession enterpriseSession) +87
   ProjectVillage.ReportView.ViewReport()
   ProjectVillage.ReportView.Page_Load(Object sender, EventArgs e)
   System.Web.UI.Control.OnLoad(EventArgs e) +67
   System.Web.UI.Control.LoadRecursive() +35
   System.Web.UI.Page.ProcessRequestMain() +750
I have gone to the Central Configuration Manger and it all of the servers running except for input file repository server and output file repository server. When I start those two servers it goes right back to stopped. Now I checked the event viewer for errors and these to errors show up.
Event Type:     Error
Event Source:     BusinessObjects_inputfileserver
Event Category:     Startup
Event ID:     35602
Date:          4/8/2011
Time:          10:04:59 AM
User:          N/A
Computer:     PVWEB3
Description:
Fail to register with the nameserver. Please check for name duplication and validness of name used: Input.PVWEB3
and
Event Type:     Error
Event Source:     BusinessObjects_inputfileserver
Event Category:     Services
Event ID:     34200
Date:          4/8/2011
Time:          10:04:59 AM
User:          N/A
Computer:     PVWEB3
Description:
Failed to register with the name server. Reason: The server name being registered is invalid. There might be another server registered using the same name. Choose another name or delete the corresponding server entry in the CMC.
Now to give a bit of a back story as to what happened before this. We were having a issue logging into the domain on this machine. The only way to get passed this was to unjoin and rejoin it to the domain then this happened. When I try to go to the CMC using the admin launch page I get the following error.
Server Error in '/businessobjects/Enterprise115/WebTools' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested Url: /businessobjects/enterprise115/WebTools/relativeredirect.aspx
I'm a bit new to business objects software as this system was setup way before I started working for this company and noone that put this system in place has worked here for a while now. So I'm hoping some of you can help me out a bit or atleast point me in the right direction.

Disregard that last post. I have gotten into Central Management Console. My next question is, where in the CMC do I got to fix the following 2 errors I was getting? I figure that are both talking about the samething but since this is my first time I've been in the CMC I am not sure where to go to fix it.
Event Type:     Error
Event Source:     BusinessObjects_inputfileserver
Event Category:     Startup
Event ID:     35602
Date:      4/8/2011
Time:      10:04:59 AM
User:      N/A
Computer:     PVWEB3
Description:
Fail to register with the nameserver. Please check for name duplication and validness of name used: Input.PVWEB3
and
Event Type:     Error
Event Source:     BusinessObjects_inputfileserver
Event Category:     Services
Event ID:     34200
Date:      4/8/2011
Time:      10:04:59 AM
User:      N/A
Computer:     PVWEB3
Description:
Failed to register with the name server. Reason: The server name being registered is invalid. There might be another server registered using the same name. Choose another name or delete the corresponding server entry in the CMC.

ISE application server not running

Hi Team,
My ISE appliance application server not running, even reboot still the same, any reason?
ISE-3315-K9
Displaying ISE application status ....
ISE Database listener is running, PID: 6270
ISE Database is running, number of processes: 17
ISE Application Server process is not running.
ISE Profiler DB is not running
ISE M&T Session Database is not running.
ISE M&T Log Collector is not running.
ISE M&T Log Processor is not running.
I saw suspicious from logs, anyone experience this before? I coudn't find this ise ErrorCode: -999 from the Cisco KE database.
2015-01-19T15:45:47.371651+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation ci_util.c[597] [marcellus]: Problem executing init script (/opt/CSCOcpm/bin/cpmcontrol.sh) err = 1
2015-01-19T15:45:47.371671+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation cars_install.c[1931] [marcellus]: App (ise) has trouble executing <init> tag
2015-01-19T15:45:47.377124+11:00 ISE1 ADEOSShell[9862]: ADEAUDIT 3015, type=APP INIT, name=Error during application init, username=marcellus, cause=(null), adminipaddress=10.0.10.7, interface=CLI, detai
l=Application (ise) has trouble executing <init> tag
2015-01-19T15:45:47.377333+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation install_cli.c[419] [marcellus]: Error while starting application - Application: ise ErrorCode: -999

Hi Neno,
Thanks for replying, this is it.
Displaying ISE version ...
Cisco Identity Services Engine
Version : 1.2.0.899
Build Date : Wed 24 Jul 2013 17:37:31 EST
Install Date : Wed 01 Oct 2014 12:33:32 EST

Adobe Signing Server: Not Running

Hi
Actually it is not possible to fulfill downloads using our ACS4 server via ADE.
The error message given from ADE is: E_ADEPT_TIMEOUT.
The status check of the ACS4 server says
6 Adobe Signing Server: Not Running
Do you encounter similar problems or might this be a networking error in our environment?
Are there any known issues in the global ASC4 infrastructure at the moment?
Thanks
Philipp

It seems to me that eu signing service is not available:
PING on eusigningservice.adobe.com results in a timeout (EU Signing Service)
PING on nasigningservice.adobe.com is successful (North America Signing Service)
Do you experience the same issues or received any official information about the progress resolving this issue?
Thanks
Philipp

CE 7.2 Java server not running

Hi,
We have installed CE 7.2 on a 32 bit Windows XP SP2 machine with 4GB of ram.
According to the 7.2 download page this more than meets the 3GB recommended amount of ram but the server is still not running.
The log for server0 is as follows:
F ********************************************************************************
I [Thr 3792] MtxInit: 10002 0 2
I [Thr 3792] MPI: dynamic quotas disabled.
I [Thr 3792] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
I [Thr 3792] *** ERROR => [MapOsShm] Can't find free space for Shared Memory (Size=84239 KB)
 [shmnt0.c 2249]
I [Thr 3792] *** ERROR => [AttachOsShm] MapViewOfFile(Key=62,Handle=0x000005D0) failed with Err=0
 [shmnt0.c 2249]
I [Thr 3792] *** ERROR => ShmCreate: Attach (62,86260736,2) failed [shmnt0.c 426]
I [Thr 3792] *** ERROR => ShmCreate( ATTACH 62, 86260728) failed 1 [mpixx.c 1064]
I [Thr 3792] *** ERROR => FcaInit: MpiInit failed (rc=MPI_ERROR: General error(1)) [fcaxxcomm.c 928]
I [Thr 3792] *** ERROR => JfcaInit(): Native FCA layer broken: 1 ***unknown error occurred*** [sfxxjfca.c 5264]
F [Thr 3792] *** ERROR => SfCSapVm::initJniClasses: com.sap.bc.proj.jstartup.fca.FCAProperties::mInit() failed (rc = 1) [sfxxjvm.hpp 362]
F [Thr 3792] *** ERROR => SfEInternalError: JNI class init failed [sfxxjvm.hpp 373]
F [Thr 3792] *** ERROR => Operation failed: SfEInternalError: JNI class init failed
[sfxxmain.cpp 1171]
F
F ********************************************************************************
F *** ERROR =>
F ***
F *** Please see section 'Java VM shared library issues'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 3792] *** LOG => exiting (exitcode -21001, retcode 2).
I have looked at the suggested SAP note 1316652 and couldn't find any relevant fixes.
Any help would be appreciated.
Thanks,
Will

Hi,
Java version ?
Configured Virtual Memory ?
The Supported Operating system to run NW CE is 64 Bit OS. The installation of SAP NW CE is only supported on 64-bit platforms.
For supported operating system and database releases, see its corresponding[ Product Availability Matrix for NW CE 7.2|http://service.sap.com/~form/handler?_EVENT=DISP_NEW&_APP=00200682500000001303&00200682500000002804=01200615320900001418]. SAP JVM 5.1 is recommended to use with SAP CE 7.2 on Windows Platform.
You will face memory address space related issue in 32 bit Windows OS with more than 2 GB of physical memory. You can avoid this problem by switching to 64bit OS Platform.
Please refer [SAP Note 129813 - Windows: Problems due to address space fragmentation|https://service.sap.com/sap/support/notes/129813] to get more information.
In that SAP Note 129813, one alternative is mentioned to deal with this address related issue by activating 3GB feature in your existing Windows OS. Please refer Microsoft KB article [283037 |http://support.microsoft.com/kb/283037]and KB [268363|http://support.microsoft.com/kb/268363/*] for the same. You will have to edit your boot.ini file to append /PAE switch.
Regards,
Bhavik G. Shroff

J2ee server not running

Hi all,
I am using EP6 here. My J2ee server is not running. Dispatcher and SDM for that instance are running but not the J2ee server.
I m getting below pasted error in std_server0 file
com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_33] Fatal: User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "User not authorized. Session terminated". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "{
passwd=********
lang=EN
receiverid=master
sysnr=00
client=410
poolmaxsize=10
user=SAPJSF_EPP
receiverid_guest=master
ashost=192.168.121.188
Dec 19, 2007 7:25:03 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_33] Fatal: Initialization of UME persistence adapter "R3_USER_DS" failed.
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: User not authorized. Session terminated
I have tried to change password in config tool. But it did not help
kindly help me in this
Thanks

Hi Karthik,
This is waht the default.trc file shows:-
1.5#000D6016010E001D000000050000100C000441B1001EB100#1198128373871#com.sap.security.core.persistence##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_8##0#0#Error#1#/System/Security/Usermanagement#Java###User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to initialize the ABAP data source: #1#Password logon no longer possible - too many failed attempts!#
#1.5#000D6016010E001D000000070000100C000441B1001EB41C#1198128373871#com.sap.security.core.persistence##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_8##0#0#Fatal#1#/System/Security/Usermanagement#Java###Initialization of UME persistence adapter "" failed.#1#R3_USER_DS#
#1.5#000D6016010E001D000000080000100C000441B1001EB596#1198128373871#com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance##com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.constructor#######SAPEngine_System_Thread[impl:5]_8##0#0#Error##Java###Initialization of data source class failed
[EXCEPTION]
#2#R3_USER_DS#com.sap.security.core.persistence.datasource.PersistenceException: Password logon no longer possible - too many failed attempts!
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:180)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:442)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:302)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:224)
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:570)
 at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
- caused by -
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts!
 at com.sap.security.core.persistence.datasource.imp.r3persistence.R3JCo640Proxy$Client640.getAttributes(R3JCo640Proxy.java:408)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.doInitRfc(R3PersistenceBase.java:685)
 at com.sap.security.core.persistence.datasource.imp.R3Persistence.localInitialization(R3Persistence.java:268)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:420)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:302)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:224)
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:570)
 at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5#000D6016010E001D0000000A0000100C000441B1001EB7AE#1198128373871#com.sap.security.core.server.ume.service.UMEServiceFrame##com.sap.security.core.server.ume.service.UMEServiceFrame#######SAPEngine_System_Thread[impl:5]_8##0#0#Error#1#/System/Security/Usermanagement#Plain###Initialization of UME persistence failed.#
#1.5#000D6016010E001D0000000C0000100C000441B1001FC884#1198128373949#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_8##0#0#Error#1#/System/Server#Plain###Service com.sap.security.core.ume.service error. Nested exception is: com.sap.engine.frame.ServiceException: Password logon no longer possible - too many failed attempts!
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:573)
 at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Password logon no longer possible - too many failed attempts!
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:180)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:442)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:302)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:224)
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:570)
 ... 6 more
#1.5#000D6016010E001D0000000E0000100C000441B1001FCD79#1198128373949#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_8##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: Password logon no longer possible - too many failed attempts!
I changed the password of SAPJSF_EPP and it has SAP_ALL assigned to it.
I tried to change the password in config tool for the following parameter
ume.r3.connection.master.passwd
Then i restarted the cluster ..but again got the error showed in trace file above
I guess i have changed it in a right way
I clicked on the parameter and typed the new password at the bottom. Then i clicked on set. It prompted me retype the value
and i did it and clicked on save. Is it right??
Actually i have been assigned the additional responsibility of EP. I m into Basis otherwise. So please bear with me.
tell me how can i solve this??
Thanks

Profiler Server not running

I am running Data Services 3.1 on a Windows 2003 server environment. Everything is installed and configured, but the Profiler Server is down. I have created a Profiler Repository, associated it with a Job Server (which is running other jobs successfully), have set up Profile User in the Management Console, registered the Profiler Repo in the Console, but that annoying little red x stays on the Profiler Icon on the bottom of Designer (Profiler Server localhost:28080 is not running).
Help? I cannot find any documentation that speaks to actual Profiler Server- just the Admin.

check the webapps directory of tomcat, if you have installed BOE also on the tomcat, it would have used the same tomcat, check for folder named DataServices under tomcat55/webapps
Check for tomcat55 folder in the business Objects home example:-
C:\Program Files\Business Objects\Tomcat55
did you restart the tomcat service after installing BOE, what is port on which BOE is running
Check if you see anything the web_admin.log files in the %LINK_DIR%\log folder
The simple option would be to reinstall DS, which will detect the BOE Tomcat and install the DataServices on that
or
you need to manually deploy the DataServices (at your own risk)
replace the BO_HOME with BO installation folder (C:\Program Files\Business Objects), run the following commands
make sure the tomcat is running
"BO_HOME\deployment/wdeploy.bat" tomcat55 -DAPP=webservice undeploy
"BO_HOME\deployment/wdeploy.bat" tomcat55 -DAPP=doc undeploy
"BO_HOME\deployment/wdeploy.bat" tomcat55 -DAPP=DataServices undeploy
"BO_HOME\deployment/wdeploy.bat" tomcat55 -DAPP=webservice deploy
"BO_HOME\deployment/wdeploy.bat" tomcat55 -DAPP=doc deploy
"BO_HOME\deployment/wdeploy.bat" tomcat55 -DAPP=DataServices deploy

RMI Connector Server not running in java 1.4

I have an application using sun JDMK implementation which is running fine in java 1.3 As I go to java 1.4, the RMI connector server is not running, the state goes to OFFLINE. I don't see any exception except that the server doesn't stay alive. Any idea on the problem ?

If you have the possibility of changing your application so that it uses the RMI connector defined by the JMX Remote API, then I would strongly encourage you to do so. You can get an implementation from http://java.sun.com/javase/technologies/core/mntr-mgmt/javamanagement/download.jsp (look for JMX Remote API Reference Implementation).
If you don't have the option of doing this in the short term, then you could try turning on JDMK traces by calling com.sun.jdmk.TraceManager.parseTraceProperties() in the main method of your application, and specifying -DLEVEL_DEBUG on the command-line. You will probably see some logging information that will help you diagnose your problem.
�amonn McManus -- JMX Spec Lead -- http://weblogs.java.net/blog/emcmanus

Managed server not running.

Hello.
I execute the managed server.
But the Managed server does not running.
Why the error occurred in the server?
D:\bea\wlserver6.1>"D:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -classpat
h ".
.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;.\samples\eval\cloudsc
ape\lib\cloudscape.jar;.\config\examples\serverclasses" -Dweblogic.Domain=ex
ampl
es -Dbea.home="D:\bea" -Dweblogic.management.password=weblogic -Dweblogic.Pr
oductionModeEnabled=true -Dweblogic.Name="managedServer" -Dweblogic.manageme
nt.server="http://localhost:7001"
"-Djava.security.policy==D:\bea\wlserver6.1/lib/weblogic.policy"
weblogic.Server
Starting WebLogic Server ....
Connecting to http://localhost:7001...
<2002-02-14 ¿ÀÈÄ 08½Ã09ºÐ01ÃÊ> <Notice> <WebLogicServer> <Starting WebLogic
Mana
ged Server "managedServer" for domain "examples">
java.lang.SecurityException: Authentication for user system denied in realm
wl_r
ealm
Start server side stack trace:
java.lang.SecurityException: Authentication for user system denied in realm
wl_r
ealm
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at
weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.security.acl.internal.Security.verify(Security.java:87)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:235)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:2
2)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at
weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundR
equest.java:85)
at
weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:134)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy7.getAdminMBean(Unknown Source)
at weblogic.management.Admin.getServer(Admin.java:1252)
at
weblogic.connector.common.ConnectorService.initialize(ConnectorServic
e.java:55)
at
weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:
46)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:482)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
--------------- nested within: ------------------
weblogic.utils.AssertionError: ***** ASSERTION FAILED ***** - with nested
except
ion:
[java.lang.SecurityException: Authentication for user system denied in realm
wl_
realm
Start server side stack trace:
java.lang.SecurityException: Authentication for user system denied in realm
wl_r
ealm
 at weblogic.security.acl.Realm.authenticate(Realm.java:212)
 at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
 at
weblogic.security.acl.internal.Security.authenticate(Security.java:12
Thanks
Hyun Min.


Hi,
I have just the same problem. I am trying to start a managed server on the SAME machine,
from the SAME domain, from the SAME directory. Therefore they use the SAME filerealm.properties
I guess that there must be something else than checking that both servers are configured
with the same system password ...
We are using WebLogic 6.1 and Portal Server 4.0 on top of it. We have configured
LDAP Realm V1. Admin server starts OK.
Thank you for any relevant input.
Ales
Parthasarathy Seshadri <[email protected]> wrote:
Please make sure the password for the system user is the same for the Admin
and
managed servers. Please inform whether you have changed the System Password
as
described in: http://e-docs.bea.com/wls/docs61/adminguide/cnfgsec.html#1052304.
Thank you.
Hyun Min wrote:
Hello.
I execute the managed server.
But the Managed server does not running.
Why the error occurred in the server?
D:\bea\wlserver6.1>"D:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -classpat
h ".
.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;.\samples\eval\cloudsc
ape\lib\cloudscape.jar;.\config\examples\serverclasses" -Dweblogic.Domain=ex
ampl
es -Dbea.home="D:\bea" -Dweblogic.management.password=weblogic -Dweblogic.Pr
oductionModeEnabled=true -Dweblogic.Name="managedServer" -Dweblogic.manageme
nt.server="http://localhost:7001"
"-Djava.security.policy==D:\bea\wlserver6.1/lib/weblogic.policy"
weblogic.Server
Starting WebLogic Server ....
Connecting to http://localhost:7001...
<2002-02-14 ¿ÀÈÄ 08½Ã09ºÐ01ÃÊ> <Notice> <WebLogicServer> <Starting WebLogic
Mana
ged Server "managedServer" for domain "examples">
java.lang.SecurityException: Authentication for user system denied inrealm
wl_r
ealm
Start server side stack trace:
java.lang.SecurityException: Authentication for user system denied inrealm
wl_r
ealm
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at
weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.security.acl.internal.Security.verify(Security.java:87)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:235)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:2
2)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at
weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundR
equest.java:85)
at
weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:134)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy7.getAdminMBean(Unknown Source)
at weblogic.management.Admin.getServer(Admin.java:1252)
at
weblogic.connector.common.ConnectorService.initialize(ConnectorServic
e.java:55)
at
weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:
46)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:482)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
--------------- nested within: ------------------
weblogic.utils.AssertionError: ***** ASSERTION FAILED ***** - with nested
except
ion:
[java.lang.SecurityException: Authentication for user system denied in
realm>> wl_>> realm>>>> Start server side stack trace:>> java.lang.SecurityException: Authentication for user system denied in>realm>> wl_r>> ealm>> at weblogic.security.acl.Realm.authenticate(Realm.java:212)>> at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)>> at>> weblogic.security.acl.internal.Security.authenticate(Security.java:12>>>> Thanks>> Hyun Min.>>-->>Developer Relations Engineer>BEA Support>>

Svrcfg show Job Server not running

Hi,
I am currently running Data Services 12.1.1.0 on Linux RH AS 4.6. I have noticed an issue and wondering whether there is something I am doing wrong.
I installed DS and configured the JS. I have successfully started, stopped and started this again, via the svrcfg utility and it clearly states "running". Then I log out of Putty and log back into the into server hosting DS. When I go to the svrcfg utility again, go to control job server it reports a status of not running. If I exit the tool and type ps -fu <username> I can see my Job Servive/Engine as I would expect and jobs still run fine?
Does anyone know what might be causing this?
Thanks
Chris

Hi,
I am also getting the same issue. If you login into putty and check the status by which terminal you have started shows "RUNNING", if you login through another session with same user it shows "NOT RUNNING".
Output of ps -o user,fname |grep -v grep|grep AL_JobSe is
bodi AL_JobSe
I am running the . .al_env.sh manually (not from profile!).
Thanks
Maran

Server not running SSIS job in 32bit mode

I have a package that I developed in VS2012 (using the SQL Data Tools component) which collects data from a DBF file using the VFPOLEDB provider, and puts it into a database on a SQL Server 2012 X64 server. The project containing the package has the DebugOption
of Run64BitRuntime set to false. I have imported this package to the SSIS Package Store of a test and live server (identical setups). The VFPOLEDB provider is installed on both, and I can see in the registry of both machines that it's there for 32bit runtimes.
The package runs fine on the test machine, but fails on the live machine. The live instance of SQL does not appear to recognize the 32bit VFPOLEDB provider that is installed.
The only difference in the instances of SQL is that the live environment has an Integration Service Catalog set up, where as the test does not. Looking at the logs of the servers, when the live starts, it runs sp_ssis_startup, and then logs messages about
unsafe assemblies being loaded in. This SP is not run on the test environment because there is no catalog.
The jobs I create have the flag set to use the 32bit runtime, but I can't help but feel that the SSIS Catalog is having an issue with the VFPOLEDB I am using, and not loading it.
I don't really know anything about the SSIS catalog, so is anyone able to suggest any direction I could move in?

I am not sure what you want in terms of job step setup information.
The history is a single message:
Message
Executed as user: MDA\catbert. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 6:52:01 PM Error: 2015-02-03 18:52:01.10
Code: 0xC0209303     Source: NEF Transfer SSIS2012 Connection manager "Source Connection"     Description: The requested OLE DB provider VFPOLEDB.1 is not registered. If the 64-bit driver is not installed,
run the package in 32-bit mode. Error code: 0x00000000. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error
Error: 2015-02-03 18:52:01.10     Code: 0xC020801C     Source: Data Flow Task OLE DB Source [100]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection
method call to the connection manager "Source Connection" failed with error code 0xC0209303. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error:
2015-02-03 18:52:01.10     Code: 0xC0047017     Source: Data Flow Task SSIS.Pipeline     Description: OLE DB Source failed validation and returned error code 0xC020801C. End Error Error:
2015-02-03 18:52:01.10     Code: 0xC004700C     Source: Data Flow Task SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2015-02-03 18:52:01.10
Code: 0xC0024107     Source: Data Flow Task      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 6:52:01
PM Finished: 6:52:01 PM Elapsed: 0.094 seconds. The package execution failed. The step failed.

ISE 1.1.1.268 server not running

Hi Folks,
I have a old ISE appliance 3315, ISE application server is not running even after restart of ISE. ISE ver is 1.1.1.268
Not able to access this appliance through web also.
Can anyone advise if I can upgarde this ISE directly to 1.2 through bootable DVD? Or do I need to upgrade this with latest patch?

you can upgrade to Cisco ISE, Release 1.2, from any of the following releases:
    Cisco ISE, Release 1.1.0.665 (or 1.1.0 with the latest patch applied)
    Cisco ISE, Release 1.1.1.268 (or 1.1.1 with the latest patch applied)
    Cisco ISE, Release 1.1.2, with the latest patch applied
    Cisco ISE, Release 1.1.3, with the latest patch applied
    Cisco ISE, Release 1.1.4, with the latest patch applied
Upgrade Roadmap
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/upgrade_guide/b_ise_upgrade_guide/b_ise_upgrade_guide_chapter_01.html#ID7

In Example Finder, I can't open the example, error: server not running

It say's the web server is not running when I try to click into any examples. It's installed under academic license 12.0.1.f3

Hello,
Does this issue only occur when you are logged on to the Domain? In other words, if you donot log on to the network does the example finder work correctly then? If so then you probably have to ask your System Administrator to allow access for the NI System Web server in your Firewall.
A good resource for finding out what ports should be opened in the Firewaal to have NI SW work correctly is:
http://digital.ni.com/public.nsf/allkb/CEF5A3568A5DA71D8625732800520EA1?OpenDocument
Regards,
Rik Prins, CLD
Applications Engineering Specialist Northern Europe, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

OD Replica Password Server Not Running

I have two Intel xServes running 10.5.1 server. The first server I created the OD master and that worked great. The second server I setup as an OD replica. They are both on the same network and no port are blocked between them. In fact they are in the same rack. When I created the replica it all started to work great. It authenticated and downloaded the OD database over SSH. Then it got to the point in the process on the replica that it said, "Starting replica service on Master". It just hung there and wouldn't go any further. I was watching the master OD the whole time and it showed the replica as being bound and enable and that everything was great, but the OD replica was still just sitting there waiting. So I closed the OD assistant window and when I did that the replica acted ok. LDAP server shows running and so does the Kerberos server. But Password server says stopped and I don't know why and want it fixed. Any help would be greatly appreciated.
-Brian

Same problem here running 10.5.2 server. You can start the Password server replica using slaconfig -starpasswordserver, but it not be a replica from master. If look at the Master's Password Service Replication log it states "DoSync: This password server does not have replicas."

DHCP server not running on startup

Hello,
I installed Solaris 10u7 on my fileserver:
SunOS sunshine 5.10 Generic_139556-08 i86pc i386 i86pcI configured DHCP as follows:
dhcpconfig -D -r SUNWbinfiles -p /var/dhcp -a x.x.x.10,x.x.x.11 -d example.com -l 86400
dhcpconfig -N 192.168.0.0 -m 255.255.0.0 -t 192.168.0.1
pntadm -A 192.168.0.2 -m myhostname -y 192.168.0.0where x.x.x.10 and x.x.x.11 are my ISP's DNS servers.
At this point the DHCP server works beautifully. But when I reboot, the in.dhcpd process is not started (or quits immediately, I can't tell), and DHCP is:
DHCP server enabled.
DHCP server stopped.No combination of starting, stopping, or restarting the service with svcadm or dhcpconfig -S can start the server. The commands report success, but when I query, the serviceis enabled and stopped.
But if I just try running in.dhcpd manually, everything works again, until I reboot.
I'm new to Solaris so I'm not sure how to debug this. Any help would be appreciated!
Thanks!

Before the reboot, when everything still works fine:
svc:/network/dhcp-server:default (DHCP server)
State: online since Sat Sep 12 16:00:59 2009
See: in.dhcpd(1M)
See: /var/svc/log/network-dhcp-server:default.log
Impact: None.After the reboot:
svc:/network/dhcp-server:default (DHCP server)
State: offline since Wed Sep 30 13:13:36 2009
Reason: Service svc:/network/ntp:default is starting.
See: http://sun.com/msg/SMF-8000-GE
See: in.dhcpd(1M)
Impact: 1 dependent service is not running. (Use -v for list.)The log (a reboot appended the last 3 lines):
[ Sep 12 15:40:06 Enabled. ]
[ Sep 12 15:44:11 Rereading configuration. ]
[ Sep 12 15:46:18 Executing start method ("/usr/lib/inet/in.dhcpd") ]
[ Sep 12 15:46:18 Method "start" exited with status 0 ]
[ Sep 12 15:53:19 Stopping because service disabled. ]
[ Sep 12 15:53:19 Executing stop method (:kill) ]
[ Sep 12 15:54:47 Enabled. ]
[ Sep 12 16:00:59 Executing start method ("/usr/lib/inet/in.dhcpd") ]
[ Sep 12 16:00:59 Method "start" exited with status 0 ]
[ Sep 30 13:12:07 Stopping because service disabled. ]
[ Sep 30 13:12:07 Executing stop method (:kill) ]
[ Sep 30 13:13:36 Enabled. ]

Init: smb(5) repository server not running

Similar Messages

Maybe you are looking for