Init w/o data transfer shows Added/Transfrd - 1/1

Hi ,
Init w/o data transfer load was successful after having applied Note 689964 - ODS object: Switching from a full to delta upload !
I have two weird ( nt sure ) issues below :
Issue 1
On Manage screen I see Added - 1 & Transferred - 1, however I dont see this record in the DSO ( Display data ).
Why is that so ?

Issue 2
All seems green excepting when I go check the Details Tab - I see some reds
DataStore Activation (Change Log) : Errors occurred
No data targets selected for update. Action terminated.
InfoPackage ZPAK_*** could not be started by Bapi_ipak_start
Errors in InfoPackage check for DataStore 0CCA_O09 ; no update possible
Please comment SDNer's

Dear Jr.Roberto,
Issue 1
On Manage screen I see Added - 1 & Transferred - 1, however I dont see this record in the DSO ( Display data ).
Why is that so ?

--> When you do a init with out data transfer, system transfers one record that is not corresponding to the data, but is a control record corresponding to the init selections.
Issue 2
All seems green excepting when I go check the Details Tab - I see some reds
DataStore Activation (Change Log) : Errors occurred
No data targets selected for update. Action terminated.
InfoPackage ZPAK_*** could not be started by Bapi_ipak_start
Errors in InfoPackage check for DataStore 0CCA_O09 ; no update possible
---> It is because you dont have a active update rules maintained for the infosource to the data target, or you have not selected any data target in the infopackage , it can also be the case that the infopackage which generates a program to start the load is having some errors, if possbile create another infopackage and start the load with active Update rules to data target.
Cheers!!!!
Charan
Message was edited by:
Sri Krishna Charan Viswanatha

Similar Messages

Init with out data transfer and DELTAS

Dear Gurus,
I created Generic data source using Function module on FAGLFLEXT table. Here i used TimeStamp for capturing DELTAS. In the first run while loading into PSA i selected INIT WITH DATA TRANSFER then it got failed. Again i deleted INIT Request in Schedular and RUN INIT WITH OUT DATA TRANSFER then it got Sucess. Again i run Delta then it also it got failed. Again i deleted the INIT Request and out FULL LOAD. IT got success. May i know why MY Deltas are getting Failed.even in R/3 side when i checked in RSA7 then in status column and in Current Status Tab it showing time stamp field like this . . : :.
I got Stuck up I dont know what to do............
Can one kindly give solution for this.
Thanks,
Sony

Debug your generic DataSource, using RSA3, to determine why the delta failures are occurring. It's most likely in the delta logic portion of your custom Function Module.

For Init without data transfer showing records 0 from 0

Hi all,
Iam doing Init without data transfer to ODS. In the ODS manage it is showing 1 from 1 which is correct. This ODS data is automatically updated to a cube. There in the cube manage it is showing 0 from 0. My mappings in update rules also correct , but why it is not giving 1 from 1.
In the cube manage the status is showing green but in the monitor of cube always it is yellow.
Help me please
Ram

Hi Ram
If you load data with INIT without data transfer then system shows the defualt record in the monitor.
If check that record in the PSA then you dont find it and on the cube as well.
If the load is green with 1 record then extractor working fine.It's not actaully a data reocrd.
Hope it helps...
Regards,
Chama.

Init with out data transfer option is not enabled

Hi Friends,
I am loading data from the data soruce 0CO_OM_OPA_7 - (Internal order items) into BI. This datasoruce is delta enabled. Flow is designed in 3.5. I checked the extractor RSA3, it shows 9 records and then i tried to load using init with data transfer, the load is not successful, it is in yellow for long time and gives the messages no record found. I tried with full load then load is successful. why init load is not successful? Is there any setting i am missing here?
Then I tried to go other option, run init without data transfer and then a full load, but I could not change the radio button to without data transfer option, it is defaultly taken init with data transfer and greyed out. How can i check init without transfer option?
thanks in advance.
Regards
Sreekanth

Hi,
In the present case you need to delete the earlier initialization flag from infopackage. Once done then you can be able to view the init without data transfer option.
So delete the flag in the menu bar --> Initialization option for source system
in the popup select the init entry and use the trash icon to delete the same.
Before doing that you can mark your earlier init load to Red and then perofrm this activity.
Once done then you can execute init-without transfer wiht no issue.
Once after this you can perform repair full load to load the data to your target.
Hope this helps.
Murali

Diff between init with data transfer and repair full request

hi,
i have observed that even in the new flow we are doing init without data transfer and then repair full request
if i do init with data transfer also i can achieve the same?
i want to know why we need to do this ,do we have any advantage of doing init without transfer and repair full request?
please suggest me

Hi Venkat,
A repair full request is loaded in cases where you get erroneous records or where there are missing records which you want to load. In such cases, a repair full request for the selective records can be loaded and is the most efficient way to correct the data, since you won't be required to load the entire data once again. Also you acheive the desired result without disturbing the delta. (You are not required to do an init w/o data transfer after a repair full, people just do it a a precaution)
However, repair full requests should only be loaded to infoproviders with update mode 'overwrite'. Otherwise, if the InfoProvider, its very probable that you might double the value of the key-figures due to rows being added twice - in case of an InfoProvider with update mode 'Additive'. So, if your InfoProvider is additive, you will need to delete the entire data and do an 'init with data transfer' to avoid corrupting the data. (Note: you can do a repair full request for an additive infoprovider in case of lost records or if you can delete erroneous records with selective deletion.But you have to be careful with the selections lest you inadvertently load other records than required and corrupt the data)

Init without data transfer

Hi sdn
my data is going form ods to cube and i already done full update from Source system now we want to do init without data transfer but when I'm seeing in monitor then requst is running for 5 hrs still yellow and when i cancell that request then run it again the when I press start load button then it ask me for ods activation for all request and for one request i had tried either way but didn't got successful, what to do we are using generic datasource
rubane

Hi,
I think you are doing data upload to ODS .
In the seetings of ODS Select Automatic Activation.
Since you have cancelled the data upload,So delete the Data from the ODS . And then Do Delta init with out data transfer .and then do full upload. But when you are doing full upload you have to make it as Repair request. And then continue Delta loads.
Once Delta init (with out data transfer) and Full upload is over to ODS ,you can start Delta init upload to Cube.
With rgds,
Anil Kumar Sharma .P

How to enable delta without data transfer option for Collections - Extracts

Hi All,
My question is basically related to FSCM - Collections related data sources and Init and Delta loads of the same.
Once the Init is completed, I wanted to do delta without data transfer and option is graded out - means can not really select the option for Collections Data Sources ..
For Example I have OCLM_INVOICE as my data source which has lot of data to extract - and in the Init stage itself, its either giving errors or keeps running for longer time (Records to be extracted is ONLY 400000) and finally shows in the monitor as 400000 of 0 Records..
And also Is there any place where I can find that all of Collection data sources are TIME STAMP based or other options.
I appreciate your quick an ddetails reply and points will be awarded for sure.
Thanks
AK.

As far as I remember there some datasources which wont support init w/o data transfer. I guess COPA is one of them. I havent worked on datasource 0CLM_INVOICE but it is possible that even this could be same case. When I seached on help.sap.com for this datasource, I found this info -
(I am pasting content because strangely the webpage doesnt give html link for this search result window)
DataSource Transactional Data: 0CLM_INVOICE
This DataSource is used to extract the transaction data of an invoice from Accounts Receivable Accounting (FI-AR). The system determines the key figures from the amounts of the line items belonging to the invoice. The date fields each contain the respective date of an action that refers to a line item. The extractor provides the data in optimized form for SAP Collections Management.
Technical Data
Application Components Collections Management (0FSCM-CLM)
Available as of Release mySAP ERP Value Pack 2005.1
Shipment SAP NetWeaver 2004s BI Content Add-On 3 SP02
Content Versions There are no content versions.
RemoteCube-Capable No
Delta-Capable Yes
Extraction from Archives No
Verifiable Yes
Data Modeling
Delta Update
The DataSource permits delta update with generic delta processing using the time stamp. The system determines the invoice reference for a document in Business Transaction Event (BTE) 5010 and saves it with a time stamp. In the case of a delta upload, it determines the amounts of the line items based on these document numbers.
Extractor Logic
Verification of Key Figures
If necessary, you can check the key figures of the individual customers as follows:
In the source system, from the SAP Easy Access screen, choose the following function: Accounting u2192 Financial Supply Chain Management u2192 Collections Management u2192 Integration with Accounts Receivable Accounting u2192 Process Receivables (Old).
Enter the required customer.
The Customer Account - Process Receivables screen appears. Here you see a list of all invoices for which there are open receivables.
Using this list, you can compare the following key figures:
Original Amount of Invoice or Credit Memo (INVOICE_AMOUNT)
Amount Paid (PAID_AMOUNT)
Open Amount (OPEN_AMOUNT)
Total of All Credit Memos for Selected Invoice (CREDITED_AMOUNT)
Amount Arranged for Payment (PAYMENT_ARRANGED)
Unsychronized Backup Recovery in BW System
If you import backup copies asynchronously, you have to initialize the delta procedure for the DataSource again.
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 18, 2008 5:00 PM

Init without data transfer is not working in the Production box for FICA extractors

Hi Guys,
We are unable to do Init without data transfer for FICA Extractors(0FC_INVDOC_XX) from BODS system. And the job is successfully completed from the BODS end but it is not hitting the source system.. Can any one please let me know how to resolve this issue.
Thanks,
Kovur

Hi,
After triggering your info pack with init without data transfer, are you able to see delta pointer at info pack-->scheduler--> init options source system.
Are getting any error message? if yes then please share here.
Thanks

Does "Init without data transfer" creates delta queues?

Does "Init without data transfer" creates delta queues?

Hi,
Yes, Once initialization successful for particular source system, you can see entry at Delta Queue(RSA7).
Hope it Helps
Srini

HI Masters, in go.bat file sld data transfer tirigering showing error

HI Masters,
In visula j2ee admin tool when i am giving correct host name, portno, user id - j2ee_admin and correct password ( in http setting tab and also cim client generation settings tab , cim clinet test failed and also triggering sld data transfer also failed.
in browser http://hostname:portano/sld, it hiome home page, but all technical systems and all options with adminstration tab also showing in active mode ( not enable).
what is the problem . i can not understand . what should be the problems and what are the ways to solve the problem.
Please give reply in detail

Sujana,
Check this document and follow the steps and you would be good to go.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414&overridelayout=true
Cheers!
Sandeep Tudumu

Source for Init with data transfer and full load

Hi Experts,
1. Please tell me where the data comes when we do the
    following actions :-
    a) Init with data transfer
    b) Full load
i want to know the source of data i.e (setup table or main table or any other table)
Helpful if you can provide the data-flow.
kindly tell which is prefrable and why?
Regards,
RG

Hi.......
When you do init with data transfer it will read data from the set up table only..........but beside this it will also set the init flag..........due to this from next time any new records will go to the delta queue...........and next time when you run delta load it will pick records from delta queue...........
Now suppose data are alrady available in the BW side...........then you can run init without data transfer.......this will only set the init flag.........it will not pick any records.........
Extraction structure gets data from set up table in case of full upload ............and in case of delta load from delta queue.......
Regards,
Debjani...........
Edited by: Debjani Mukherjee on Sep 20, 2008 11:45 AM

How do I "Init without data transfer' using 7.0 transformations and DTP's?

I have a data-mart situation where I have a standard DSO object that sends deltas up to a standard cube. This data flow is created with 7.0 transformation and a delta type DTP and has been running fine.
I now have a new single activated request loaded to the DSO object but I DO NOT want this request to delta update to the cube. In 3.x, I used to go into the init infopackage, manually delete the initialization pointer, and run a 'Initialize Without Data Transfer' to make this work. Deltas could then continue as before.
I do not see a way to do this using 7.0 transformations and DTP's. I want to reset the init from DSO to cube so this request does not get updated. Does anyone have step by step ideas on how this can be accomplished?
Thanks in advance for any help on this issue.

Hi,
delete the data in the cube by using oprtion selective deletion based on request number.
(if delta request is deleted from cube, with next load last delta records will also come)
in this scenario there is no need to delete initiaizations option.
in BI 7.0, initialization load is not there.
see below documentation on DTP in SAP help.
"On the Extraction tab page, specify the parameters:
a. Choose Extraction Mode.
You can choose Delta or Full mode.
In contrast to a delta transfer with an InfoPackage, an explicit initialization of the delta process is not necessary for the delta transfer with a DTP. When the data transfer process is executed in delta mode for the first time, all existing requests are retrieved from the source and the delta status is initialized. "
Link: [http://help.sap.com/saphelp_nw70/helpdata/EN/42/f98e07cc483255e10000000a1553f7/frameset.htm]
Regards
Daya Sagar

DTPs - Delta Init without Data transfer.

Hi All,
I am implementing the DTPs in my project where we replicate the old 3.x extractions with the bw7x functioanlity;
Can anyone tell me if their is way to implement the "Delta Init without Data transfer" scenario with DTPs for
both R/3 to BW(ODS) extraction or for the Datamarts - ODS to Cube within BW??
Thanks in advance!
Cheers
Rao

Hi Rao,
Yes u can achieve Initialization without data in BI 7 DTPs.
Goto ur DTp's Execute Tab, and Processing mode there drop down the list and select No Data Transfer,Delta Status in Source: Fetched.
Assign points if helpful.

I'm able to transfer iPhotos from Mac to MacPro but data I've added to photos does not transfer. What am I missing? Tried using Thunderbolt, AirDrop, Flash drive with no success.

I'm able to transfer iPhotos from Mac to MacPro but data I've added to photos does not transfer. What am I missing? Tried using Thunderbolt, AirDrop, Flash drive with no success. Do I have to use iCloud for 800 vacation photos or re-enter all the data after transfer?

There is no support for mirroring or syncing iPhoto libraries or Aperture libraries. You can however export partial Aperture libraries on one mac and merge them into other libraries on a second Mac.
To transfer your edited photos open your photolibrary in Aperture and and collect the edited photos in an album. Then select the album and use the command "File export > Album as new library". This will export all edited photos as a new Aperture library. Copy this library to your other Mac and import it with "File < Import > Library to your other photolibrary on that computer (assuming you are having the same Aperture version on both macs). When merging the new library into your Aperture library, opt to keep the newer versions from the imported library. iPhoto 9.5.1 will be able to open these merged Aperture 3.5.1 libraries.

Is there a place in my CS6 that will show the key so I can have Mac do a data transfer?

My college provided all design graduates with a Macbook with CS6 Illustrator, Photoshop, InDesign, Dreamweaver, Fireworks, Bridge, Extension manager, and Flash installed and registered with the key to Adobe. My laptop that they gave has gone bad and is being replaced this weekend by myself since my school won't fix it(per their contract they are required to so I plan to go after them for this but int he meantime) The school never provided us with the license key for this CS6, they did the install themselves, is there a place in my programs on my laptop that I can go to in order to get this key so I can have Mac do a data transfer?

Thanks, thats a good resource. However, it doesn't help in my situation, I didn't [urchase this or install it directly thru Adobe, as stated my college, College america(famous for their promotion that if you go to school with them and graduate you get a free laptop with all of CS6 included) this means they installed it as a mass install on all Design students laptops. They originally gave us CS5 then sent us a link to a site for upgrading to CS6, the email said this from the college;
Great News Regarding the Upgrade to CS6:
As it has been announced in your Design courses the free upgrade to CS6 is now available for all active Graphic Arts and Web Design students.
To get the upgrade please follow these 3 simple steps:
1- Copy and paste this link to your web browser: getmyisos.myvalcom.net
2- Select the download for your specific computer (Mac or HP)
It will take a long time to download, make sure you reset your “sleep” timer on your computer so it does not doze off during the download process. When it is complete…
When downloading the upgrade it (I guess, just speculating here) had the license bult in because it was never displayed it just downloaded and
i have used it ever since. I of course tried contacting the school for this but when you graduate from them, and are no longer a potential student they can suck up to sell you on their courses, they stop responding and being nice.
Does anyone have any other ideas? Is there a spot in the programs where if I open preferences in my Mac book or if I open he programs I can click something that displays the license in my laptop?
Thanks

Init w/o data transfer shows Added/Transfrd - 1/1

Similar Messages

Maybe you are looking for