Init with out data transfer option is not enabled

Hi Friends,
I am loading data from the data soruce 0CO_OM_OPA_7 - (Internal order items) into BI. This datasoruce is delta enabled. Flow is designed in 3.5. I checked the extractor RSA3, it shows 9 records and then i tried to load using init with data transfer, the load is not successful, it is in yellow for long time and gives the messages no record found. I tried with full load then load is successful. why init load is not successful? Is there any setting i am missing here?
Then I tried to go other option, run init without data transfer and then a full load, but I could not change the radio button to without data transfer option, it is defaultly taken init with data transfer and greyed out. How can i check init without transfer option?
thanks in advance.
Regards
Sreekanth

Hi,
In the present case you need to delete the earlier initialization flag from infopackage. Once done then you can be able to view the init without data transfer option.
So delete the flag in the menu bar --> Initialization option for source system
in the popup select the init entry and use the trash icon to delete the same.
Before doing that you can mark your earlier init load to Red and then perofrm this activity.
Once done then you can execute init-without transfer wiht no issue.
Once after this you can perform repair full load to load the data to your target.
Hope this helps.
Murali

Similar Messages

Init with out data transfer and DELTAS

Dear Gurus,
I created Generic data source using Function module on FAGLFLEXT table. Here i used TimeStamp for capturing DELTAS. In the first run while loading into PSA i selected INIT WITH DATA TRANSFER then it got failed. Again i deleted INIT Request in Schedular and RUN INIT WITH OUT DATA TRANSFER then it got Sucess. Again i run Delta then it also it got failed. Again i deleted the INIT Request and out FULL LOAD. IT got success. May i know why MY Deltas are getting Failed.even in R/3 side when i checked in RSA7 then in status column and in Current Status Tab it showing time stamp field like this . . : :.
I got Stuck up I dont know what to do............
Can one kindly give solution for this.
Thanks,
Sony

Debug your generic DataSource, using RSA3, to determine why the delta failures are occurring. It's most likely in the delta logic portion of your custom Function Module.

Flat File loading Initialize with out Data transfer is disabled in BI 7.0

Hi experts,
When loading through flat file in BI 7.0 for Info Package Level Initialization Delta Process with data Transfer is coming by default,but when i want to select Initialization Delta Process without Data transfer is disabled. (in the creation of Data Source (flat file) in the Extraction Tab Delta Process is changed to FIL1 Delta Data (Delta Images).
please provide me Solution.
regards
Subba reddy.

Hi Shubha,
For flat file load please go throught he following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/03450525ee517be10000000a1553f6/frameset.htm
This will help.
Regards,
Mahesh

Init w/o data transfer shows Added/Transfrd - 1/1

Hi ,
Init w/o data transfer load was successful after having applied Note 689964 - ODS object: Switching from a full to delta upload !
I have two weird ( nt sure ) issues below :
Issue 1
On Manage screen I see Added - 1 & Transferred - 1, however I dont see this record in the DSO ( Display data ).
Why is that so ?

Issue 2
All seems green excepting when I go check the Details Tab - I see some reds
DataStore Activation (Change Log) : Errors occurred
No data targets selected for update. Action terminated.
InfoPackage ZPAK_*** could not be started by Bapi_ipak_start
Errors in InfoPackage check for DataStore 0CCA_O09 ; no update possible
Please comment SDNer's

Dear Jr.Roberto,
Issue 1
On Manage screen I see Added - 1 & Transferred - 1, however I dont see this record in the DSO ( Display data ).
Why is that so ?

--> When you do a init with out data transfer, system transfers one record that is not corresponding to the data, but is a control record corresponding to the init selections.
Issue 2
All seems green excepting when I go check the Details Tab - I see some reds
DataStore Activation (Change Log) : Errors occurred
No data targets selected for update. Action terminated.
InfoPackage ZPAK_*** could not be started by Bapi_ipak_start
Errors in InfoPackage check for DataStore 0CCA_O09 ; no update possible
---> It is because you dont have a active update rules maintained for the infosource to the data target, or you have not selected any data target in the infopackage , it can also be the case that the infopackage which generates a program to start the load is having some errors, if possbile create another infopackage and start the load with active Update rules to data target.
Cheers!!!!
Charan
Message was edited by:
Sri Krishna Charan Viswanatha

I have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

What brand/model USB drive? Is it bus or AC powered?
On Mail...
First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
Users/YourUserName/Library/Mail
Users/YourUserName/Library/Mail Downloads
(Could be a different folder here if you chose such in Mail Prefs)
Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
/Users/YourUserName/Library/Preferences/com.apple.mail.plist

How to enable delta without data transfer option for Collections - Extracts

Hi All,
My question is basically related to FSCM - Collections related data sources and Init and Delta loads of the same.
Once the Init is completed, I wanted to do delta without data transfer and option is graded out - means can not really select the option for Collections Data Sources ..
For Example I have OCLM_INVOICE as my data source which has lot of data to extract - and in the Init stage itself, its either giving errors or keeps running for longer time (Records to be extracted is ONLY 400000) and finally shows in the monitor as 400000 of 0 Records..
And also Is there any place where I can find that all of Collection data sources are TIME STAMP based or other options.
I appreciate your quick an ddetails reply and points will be awarded for sure.
Thanks
AK.

As far as I remember there some datasources which wont support init w/o data transfer. I guess COPA is one of them. I havent worked on datasource 0CLM_INVOICE but it is possible that even this could be same case. When I seached on help.sap.com for this datasource, I found this info -
(I am pasting content because strangely the webpage doesnt give html link for this search result window)
DataSource Transactional Data: 0CLM_INVOICE
This DataSource is used to extract the transaction data of an invoice from Accounts Receivable Accounting (FI-AR). The system determines the key figures from the amounts of the line items belonging to the invoice. The date fields each contain the respective date of an action that refers to a line item. The extractor provides the data in optimized form for SAP Collections Management.
Technical Data
Application Components Collections Management (0FSCM-CLM)
Available as of Release mySAP ERP Value Pack 2005.1
Shipment SAP NetWeaver 2004s BI Content Add-On 3 SP02
Content Versions There are no content versions.
RemoteCube-Capable No
Delta-Capable Yes
Extraction from Archives No
Verifiable Yes
Data Modeling
Delta Update
The DataSource permits delta update with generic delta processing using the time stamp. The system determines the invoice reference for a document in Business Transaction Event (BTE) 5010 and saves it with a time stamp. In the case of a delta upload, it determines the amounts of the line items based on these document numbers.
Extractor Logic
Verification of Key Figures
If necessary, you can check the key figures of the individual customers as follows:
In the source system, from the SAP Easy Access screen, choose the following function: Accounting u2192 Financial Supply Chain Management u2192 Collections Management u2192 Integration with Accounts Receivable Accounting u2192 Process Receivables (Old).
Enter the required customer.
The Customer Account - Process Receivables screen appears. Here you see a list of all invoices for which there are open receivables.
Using this list, you can compare the following key figures:
Original Amount of Invoice or Credit Memo (INVOICE_AMOUNT)
Amount Paid (PAID_AMOUNT)
Open Amount (OPEN_AMOUNT)
Total of All Credit Memos for Selected Invoice (CREDITED_AMOUNT)
Amount Arranged for Payment (PAYMENT_ARRANGED)
Unsychronized Backup Recovery in BW System
If you import backup copies asynchronously, you have to initialize the delta procedure for the DataSource again.
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 18, 2008 5:00 PM

Activation of Objects with Type Data Transfer Process

Hi Experts,
I am stuck in a problem of activation of DTP. I loaded the data from the Datasource to PSA and there are about 200,000 reocrds.
Now I wanted to take this load to DSO NEW table ..I have created a DTP and when I try to activate the DTP I get this Error
Activation of Objects with Type Data Transfer Process
    Internal Activation (Data Transfer Process )
         Post Processing/Checking the Activation for Data Transfer Process DTP_49Z7OSAHFAR9O8335ED6
              Error when activating Data Transfer Process DTP_49Z7OSAHFAR9O8335ED67X11C.
I tried to activate the Data source but it still didnt help. Looked in SDN for some related stuff but most of them are talking about going for SP 11 ..we are already on
*SAP_BW     700     SAPKW70014     *
Your suggestion will be appreciated with maximum points
Thanks

Hello Experts,
Could you'll please help me out with this ...I
I deleted the DTP and created back again
logged out of BW and logged back again
Infact I found a SAP note 1086877 and i applied it ..but it still didint help
Whie loading the Master Data from PSA to DTP ..it worked fine.
While Loading the transactrion data I went to Tcode RSBATCH and in the drop down I selected the DTP activation and gave a 3 Back ground processes....Ever since that it started giving me problem
Your help will be appreciated...my data loads are stalled ..i mean I cant move forward.
Thanks

Partitioning is possible with data(1 lakh records) or with out data

partitioning is possible with data(1 lakh records) or with out data...if with data, its compulsory to stop database..and its not possible to stop, but i want to partitioning my table for increase the performance...what can i do please help me.

"lahk" is not an internationally recognised term. Please use terminology that is recognised internationally.
You could create a table with partitioning, copy your data into it, then drop the original table and rename the new one to the old name (bear in mind any indexes on it), though this isn't ideal if you have primary/foreign keys etc.
Also, ensure you are licenced to use Partitioning. It is installed as part of the database as standard, but you have to have additional licence to actually use it in production.

Can I use gps applications like tomtom at the ipad mini with mobile data transfer turned off?

Need help about ipad mini.
The information on the apple web page refers that only the 3G versions have gps capabilities.
Wath is not clear to me is if the gps works only when coneted with 3G data transfer, or it works without it, if I download some software like tomtom or navigon.
Best regards
Pedro

You can use it without being connected to 3G. Only the 3G/4G iPads have a built-in GPS chip, the wifi-only models don't, and you can use apps such as TomTom with it which contain the maps, you don't need to be connected to 3G (or even have activated 3G on the iPad) or wifi to then use it.

I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

Hi Wayne,
Thank you for this response. I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.
Kind regards
Paul

HT3529 the MMs option is not enabled... I am unable to click on that option...

the MMs option is not enabled... I am unable to click on that option...

Who is your carrier? Your carrier may not support this.

Purchase requisition with out material master - options

Hi experts
I wish to establish a control in Purchase requisition that, when the user enters item with out material master record (only enters text), system should give a pop for decision options yes or no.
Please let me know the userexit useful to map this while saving the document.
regards
marias

Hi
This userexit is specifically for Customers' Own Data in Purchase Requisition. we need to provide data. My scenario does not involve entry of new data and to verify the PR item data already entered.
regards
marias

Data S Default data transfer Options

Hi
What do the below mentioned terms mean in infopackage-Schedular--Data S Default data transfer
1Max size of datapakcet in kbytes
2Max no of dailogues process for sending data
3No of data packet per info idoc
Please help me with an example and what importance it has when we increase/ decrease the lengh of the above 3 mentioned do we have any interconnection in all three or they are all independent.
Thanks
Puneet

Hello Puneet,
These are some standard BW Settings done in transaction SPRO.
SPRO ->SAP Customizing Implementation Guide->SAP NetWeaver->SAP Business Information Warehouse->Links to Other Systems->Maintain Control Parameters for the data transfer
Maximum size of a data packet in kilo bytes.
The individual records are sent in packages of varying sizes in the data transfer to the Business Information Warehouse. Using these parameters you determine the maximum size of such a package and therefore how much of the main memory may be used for the creation of the data package.
SAP recommends a data package size between 10 and 50 MB.
Frequency with which status Idocs are sent
With this frequency you establish how many data IDocs should be sent in an Info IDoc.
Maintain Control Parameters for the data transfer
Standard settings
For SAP source systems, you change the control parameter settings in the transaction SBIW (Customizing for Extractors), under Business Information Warehouse -> General Settings -> Control Parameters -> Maintain Control Parameters for Data Transfer .
Activities
1. Maximum size of data packages
For data transfer into BW, the individual data records are sent in packages of variable size. You use these parameters to control how large such a data package typically is. If no entry is maintained, the data is transferred with a standard setting of 10,000 kbytes per data package. The memory requirement depends not only on the setting for data package size, but also on the width of the transfer structure, and the memory requirement of the relevant extractor.
2. Frequency
With the specified frequency, you detemine after how many data IDocs an Info IDoc is sent, or how many data IDocs are described by an Info IDoc.
The frequency is set to 1 by default. This means that an Info IDoc follows every data IDoc. Generally, choose a frequency of between 5 and 10, but not greater than 20.
The larger the package size of a data IDoc, the lower you must set the frequency. In this way you ensure that, when loading data, you receive information on the current data load status at relatively short intervals.
In the BW Monitor you can use each Info IDoc to see whether the loading process is running without errors. If this is the case for all the data IDocs in an Info IDoc, then the traffic light in the Monitor is green. One of the things the Info IDocs contain information on, is whether the current data IDocs have been loaded correctly.
3. Size of a PSA partition
Here, you can set the number of records at which a new partition is generated. This value is set to 1.000.000 records as standard.
When you are integrating with Other SAP Components then
SPRO ->SAP Customizing Implementation Guide->Integration with Other SAP Components->Data Transfer to the SAP Business Information Warehouse->General Settings->Maintain Control Parameters for the data transfer
Maintain Control Parameters for Data Transfer
Activities
1. Source System
Enter the logical system of your source client and assign the control parameters you selected to it.
You can find further information on the source client in the source system by choosing the path Tools -> Administration -> Management -> Client Maintenance.
2. Maximum Size of the Data Package
When you transfer data into BW, the individual data records are sent in packages of variable size. You can use these parameters to control how large a typical data packet like this is.
If no entry was maintained then the data is transferred with a default setting of 10,000 kBytes per data packet. The memory requirement not only depends on the settings of the data package, but also on the size of the transfer structure and the memory requirement of the relevant extractor.
3. Maximum Number of Rows in a Data Package
With large data packages, the memory requirement mainly depends on the number of data recrods that are transferred with this package. Using this parameter you control the maximum number of data records that the data package should contain.
By default a maximum of 100,000 records are transferred per data package.
The maximum main memory requiremen per data package is approximately 2'Max. Rows'1000 Byte.
4. Frequency
The specified frequency determines the number of IDocs that an Info IDoc is to be sent to, or how many data IDocs an Info Idoc describes.
Frequency 1 is set by default.. This means that an Info Idoc follows every data Idoc. In general, you should select a frequency between 5 and 10 but no higher than 20.
The bigger the data IDoc packet, the lower the frequency setting should be. In this way, when you upload you can obtain information on the respective data loading in relatively short spans of time .
With the help of every Info IDoc, you can check the BW monitor to see if there are any errors in the loading process. If there are none, then the traffic light in the monitor will be green. The Info IDocs contain information such as whether the respective data IDocs were uploaded correctly.
5. Maximum number of parallel processes for the data transfer
An entry in this field is only relevant from release 3.1I onwards.
Enter a number larger than 0. The maximum number of parallel processes is set by default at 2. The ideal parameter selection depends on the configuration of the application server, which you use for transferring data.
6. Background job target system
Enter the name of the application server on which the extraction job is to be processed.
To determine the name of the application server, choose Tools -> Administration -> Monitor -> System monitoring -> Server. The name of the application server is displayed in the column Computer.
7. Maximum Number of Data Packages in a Delta Request
With this parameter, you can restrict the number of data packages in a delta request or in the repetition of a delta request.
Only use this restriction when you expect delta requests with a very high data volume, so that, despite sufficiently large data package sizes, more than 1000 data packages can result in a request.
With an initial value or when the value is 0, there is no restriction. Only a value larger than 0 leads to a restriction in the number of data packages. For reasons of consistency, this number is not generally exactly adhered to. The actual restriction can, depending on how much the data is compressed in the qRFC queue , deviate from the given limit by up to 100.
Thanks
Chandran

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

Help with XA Data Source option

I am attempting to implement a two phase commit in my bpel process. When I attempt to select the XA Data Source check box in the Adapter Configuration Wizard for my Database Adapter, the option is not there. What should I do to get this option to appear in the wizard?
Thanks

Hi,
Under Weblogic JDBC Datasources select the datasource and then select Transaction tab there you can find Use XA datasource interface.
and In DB adapter ... go to Configuration Tab ---Outbound Connection Pool--- Unhide the pool group -Select JNDI name ( e.g eis/DB/local ) ---enter the JDBC datasource created earlier in weblogic JDBC datasource against xADataSourceName..
Now Click on Transaction tab & select Transaction Support: as XA Transaction .
Regards,
Abhinav Gupta

Init with out data transfer option is not enabled

Similar Messages

Maybe you are looking for