Init without data transfer is not working in the Production box for FICA extractors
Hi Guys,
We are unable to do Init without data transfer for FICA Extractors(0FC_INVDOC_XX) from BODS system. And the job is successfully completed from the BODS end but it is not hitting the source system.. Can any one please let me know how to resolve this issue.
Thanks,
Kovur
Hi,
After triggering your info pack with init without data transfer, are you able to see delta pointer at info pack-->scheduler--> init options source system.
Are getting any error message? if yes then please share here.
Thanks
Similar Messages
-
For Init without data transfer showing records 0 from 0
Hi all,
Iam doing Init without data transfer to ODS. In the ODS manage it is showing 1 from 1 which is correct. This ODS data is automatically updated to a cube. There in the cube manage it is showing 0 from 0. My mappings in update rules also correct , but why it is not giving 1 from 1.
In the cube manage the status is showing green but in the monitor of cube always it is yellow.
Help me please
RamHi Ram
If you load data with INIT without data transfer then system shows the defualt record in the monitor.
If check that record in the PSA then you dont find it and on the cube as well.
If the load is green with 1 record then extractor working fine.It's not actaully a data reocrd.
Hope it helps...
Regards,
Chama. -
Does "Init without data transfer" creates delta queues?
Does "Init without data transfer" creates delta queues?
Hi,
Yes, Once initialization successful for particular source system, you can see entry at Delta Queue(RSA7).
Hope it Helps
Srini -
DTPs - Delta Init without Data transfer.
Hi All,
I am implementing the DTPs in my project where we replicate the old 3.x extractions with the bw7x functioanlity;
Can anyone tell me if their is way to implement the "Delta Init without Data transfer" scenario with DTPs for
both R/3 to BW(ODS) extraction or for the Datamarts - ODS to Cube within BW??
Thanks in advance!
Cheers
RaoHi Rao,
Yes u can achieve Initialization without data in BI 7 DTPs.
Goto ur DTp's Execute Tab, and Processing mode there drop down the list and select No Data Transfer,Delta Status in Source: Fetched.
Assign points if helpful. -
Hi sdn
my data is going form ods to cube and i already done full update from Source system now we want to do init without data transfer but when I'm seeing in monitor then requst is running for 5 hrs still yellow and when i cancell that request then run it again the when I press start load button then it ask me for ods activation for all request and for one request i had tried either way but didn't got successful, what to do we are using generic datasource
rubaneHi,
I think you are doing data upload to ODS .
In the seetings of ODS Select Automatic Activation.
Since you have cancelled the data upload,So delete the Data from the ODS . And then Do Delta init with out data transfer .and then do full upload. But when you are doing full upload you have to make it as Repair request. And then continue Delta loads.
Once Delta init (with out data transfer) and Full upload is over to ODS ,you can start Delta init upload to Cube.
With rgds,
Anil Kumar Sharma .P -
Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7
Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7
I have the exact same problem you have? I can occasionally getpushnotification, but only once a day fore facebook. For twitter, I get nothing and newer got. Other programs never got any notification att all.Push notification is on both under notification center and the respective programs.I have iOS 5.0.1 on iPhone 4S.
-
How do I "Init without data transfer' using 7.0 transformations and DTP's?
I have a data-mart situation where I have a standard DSO object that sends deltas up to a standard cube. This data flow is created with 7.0 transformation and a delta type DTP and has been running fine.
I now have a new single activated request loaded to the DSO object but I DO NOT want this request to delta update to the cube. In 3.x, I used to go into the init infopackage, manually delete the initialization pointer, and run a 'Initialize Without Data Transfer' to make this work. Deltas could then continue as before.
I do not see a way to do this using 7.0 transformations and DTP's. I want to reset the init from DSO to cube so this request does not get updated. Does anyone have step by step ideas on how this can be accomplished?
Thanks in advance for any help on this issue.Hi,
delete the data in the cube by using oprtion selective deletion based on request number.
(if delta request is deleted from cube, with next load last delta records will also come)
in this scenario there is no need to delete initiaizations option.
in BI 7.0, initialization load is not there.
see below documentation on DTP in SAP help.
"On the Extraction tab page, specify the parameters:
a. Choose Extraction Mode.
You can choose Delta or Full mode.
In contrast to a delta transfer with an InfoPackage, an explicit initialization of the delta process is not necessary for the delta transfer with a DTP. When the data transfer process is executed in delta mode for the first time, all existing requests are retrieved from the source and the delta status is initialized. "
Link: [http://help.sap.com/saphelp_nw70/helpdata/EN/42/f98e07cc483255e10000000a1553f7/frameset.htm]
Regards
Daya Sagar -
N95 8Gb USB Data Transfer Mode not working
I have a bizarre problem with USB Data transfer.
a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
c) Later in the day, connected PC #2 and did the same with the last few applications.
d) Next day tried to connect PC #1 and it didn't work
e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
f) Went to PC #2 and tried - Data transfer mode works - no problem.
g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
h) I have tried it on PC #3 and this works as well - no problem.
1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
All PC's are XP SP2.
Any suggestions on anything else to try ?
RegardsSOLVED by:
- attaching N95, selecting USB Data Transfer Mode
- Going to Device Manager
- Selecting the USB Mass Storage Device for N95
- "Uninstall"
- Remove cable when N95 says its safe to
- Re-attach cable
The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
No idea what messed it up in the first place though. -
Why Skype does not work with the new OS for iphone
Since I downloaded the new OS, skype for iphone does not work at all. Nobody can hear...
Have you tried deleting the app then reinstalling it? If not, give that a try.
-
2nd day with fios triple play ultimate hd, caller id does not work on the sd boxes
caller id works on the hd tv. but does not on the sd boxes. both sd boxes have been activated.
Hi maggie183,
I'm sorry you are having trouble with your TV Caller ID. Have you gone through each of the boxes and made sure that the caller ID is set enabled? You would do this by pressing menu on the FiOS remote, go down to 'Settings' , from there go to 'Caller ID' and 'Check Availability'. If this has been done, what you can try to do is to power cycle your set-top boxes in one of two ways. You can pull out the power cord for 30 seconds and plug it back in or if the power cord is hard to get to, hit menu on the FiOS remote, go to 'Customer Support', then 'In-Home Agent' and finally 'Reboot Set-Top Box'. If you still are having trouble, one last thing you can try to do is to unplug your FiOS Internet router for 20 seconds and plug it back in.
If these tips do not work, please PM me and I will take a closer look into your issue.
--James
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. -
App Store is not working after the newest update for me
How do I fix it ?
Mine is doing the same thing too after I updated my iPhone to the new iOS 7. I can't get into the iTunes Store, it closes right when it opens. I've turned my phone off and turned it back on but it is still the same.
-
The refresh icon is not appearing in the customize box for the toolbar
I went to View...Toolbars...Customize, but do not find the option "refresh" available to install on the toolbar...is there another place I should be looking for the "refresh" option?...thx
* Make sure that you have the "Navigation Toolbar" and the "Bookmarks Toolbar" visible: "View > Toolbars"
* If items are missing then see if you can find them in the "View > Toolbars > Customize" window
* If you see the item in the Customize window then drag it back from the Customize window to one of the toolbars.
* If, in "View > Toolbars > Customize", you do not see that item then click the "Restore Default Set" button
See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
See http://kb.mozillazine.org/Toolbar_customization
* If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/") -
Source for Init with data transfer and full load
Hi Experts,
1. Please tell me where the data comes when we do the
following actions :-
a) Init with data transfer
b) Full load
i want to know the source of data i.e (setup table or main table or any other table)
Helpful if you can provide the data-flow.
kindly tell which is prefrable and why?
Regards,
RGHi.......
When you do init with data transfer it will read data from the set up table only..........but beside this it will also set the init flag..........due to this from next time any new records will go to the delta queue...........and next time when you run delta load it will pick records from delta queue...........
Now suppose data are alrady available in the BW side...........then you can run init without data transfer.......this will only set the init flag.........it will not pick any records.........
Extraction structure gets data from set up table in case of full upload ............and in case of delta load from delta queue.......
Regards,
Debjani...........
Edited by: Debjani Mukherjee on Sep 20, 2008 11:45 AM -
Diff between init with data transfer and repair full request
hi,
i have observed that even in the new flow we are doing init without data transfer and then repair full request
if i do init with data transfer also i can achieve the same?
i want to know why we need to do this ,do we have any advantage of doing init without transfer and repair full request?
please suggest meHi Venkat,
A repair full request is loaded in cases where you get erroneous records or where there are missing records which you want to load. In such cases, a repair full request for the selective records can be loaded and is the most efficient way to correct the data, since you won't be required to load the entire data once again. Also you acheive the desired result without disturbing the delta. (You are not required to do an init w/o data transfer after a repair full, people just do it a a precaution)
However, repair full requests should only be loaded to infoproviders with update mode 'overwrite'. Otherwise, if the InfoProvider, its very probable that you might double the value of the key-figures due to rows being added twice - in case of an InfoProvider with update mode 'Additive'. So, if your InfoProvider is additive, you will need to delete the entire data and do an 'init with data transfer' to avoid corrupting the data. (Note: you can do a repair full request for an additive infoprovider in case of lost records or if you can delete erroneous records with selective deletion.But you have to be careful with the selections lest you inadvertently load other records than required and corrupt the data) -
Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service
Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support
Maybe you are looking for
-
Styling bullets in text using InDesign's bullets
Having a problem with aligning bulleted lists that have multiple lines. What I want is the text to align but I also need the bullets to stay within the text. I tried changing "left indent" and "first line indent" but no result (see the attachment). A
-
ITunes 7.0 erased deleted all the music on my ipod
I can't find a way to ask this directly to iTunes since there is no contact email or phone, and I can't find it addressed in their support pages so I am trying to address it here. WHY does upgrading to iTunes 7.0 erase all the music on the ipod witho
-
How do i enable third party cookies on my macbook pro?
how do i enable third party cookies on my macbook pro?
-
Problem with mp3 illustration in the finder since 10.6.8 update !
Hi ! since the last update to mac os X 10.6.8 my mp3 illustartions are not present anymore in the finder.... but i can see them in itunes! can anyone help me? it seems to be a bug cause some people with mac os X lion meet the same problem.... Thanks
-
No frames visible in Reports 2.5 Layout on Win2000
Hello: I upgraded my OS to Win2000 and run Reports 2.5. I am unable to see the frames in the layout editor (the reports displayed/worked fine on Win 98). Please help. Thanks Peter