Initial/delta uploads

Hi Gurus,
  i have 2 years data in my BW and i want to upload 2 months data to my target objects through LO-method. what are the steps i hav to fallow?
   please let me know about setup tables? 
           how/where/when  we are using them?
           How they are differ in LIS and LO?
thanks & regds
kanthi

Hi Kanthi,
Have a look at this
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/2140 [original link is broken] [original link is broken] [original link is broken]
Check this thread to know the differences between LO & LIS
Re: differences between LO and LIS
Hope it helps...Let me know
Regards,
R.Ravi

Similar Messages

  • Difference between initial upload & delta upload.

    Hi experts,
    Please tell me the difference between Initial upload & delta upload.
    please tell me the characteritics of each upload.
    Thanks & Regards
    prajith P

    Hello
    These 2 load are performed for the data loading in CRM from other SAP system like ECC. Initial download is the activity that to be performed when you want to download the master data 1st time.
    Delta load is performed automatically if we make any change in the master data records.
    For the more depth knowledge you can go through the below mentioned links.
    http://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C03_CRM701_BB_ConfigGuide_EN_XX.doc
    Points can be issued if you found you answer.
    Thanks
    Karan

  • After deletion ODS change log, Delta upload OK?

    Hi all,
    Now I am reducing data from BW server. For this purpose, I will delete ODS change log. Both of data "from ODS" and "to ODS" are uploaded by Delta Upload.
    If I delete change log after last delta initialization, is there any problem to next delta upload?
    For example, the last delta initializing was done April 1. And I delete the change log up to April 30. After this operation, can be expected any problem to Delta upload?
    Bamboo Shampoo

    I dont think it will cause any issue with next delta loads.
    Data goes from ODS to its targets from change log table.
    But I think better have strategy like..'delete change log data only for requests older than say...1 month or 2 months..'
    so that if u have problems with recent data loads..u can reload easily..
    u can also try cleaning up old requests from the PSA tables in the system..
    cheers,
    Vishvesh

  • Delta Upload is happening but with 0 records

    Dear All,
    I have problem with delta upload, Intialize upload is happening but delta upload not picking the records but it is showing status as green but with 0 records eventhough the records are there in the source system.
    DataSource : 0CRM_SRV_PROCESS_H
    the delta type for the datasource is AIMD (After Images with Deletion ID Using Delta Queue).
    I am pulling data from Solution MANAGER.
    Please guide..
    Thanks,
    SGK.

    hi SGK,
    in crm, check bwa5 and bwa7 ?
    check oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction and go through following
    CRM Data source issue with Delta Load( For BW Gurus only)
    -> oss note 819570,871930,887724
    hope this helps.
    Question 3 : The Deltas for my data source are not extracted . What can I do?
    Suggestion 3: Please check the following.
    Please Check if the services have been generated in transaction GNRWB.
    If they are not active(not marked 'X' before their names) then activate the services following the steps here.
    Go to transaction GNRWB
    Select BUS_TRANS_MSG
    Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
    Press Generate.
    Also check for the following:
    1. The delta should have been initialized successfully.
    2. Confirm that all Bdocs of type BUS_TRANS_MSG
    are processed with success in SMW01.
    3. If there are queues in SMQ1 with erroneous status then activate these queues.
    In Transaction SMQ1 if there are Queues existing with
    names beginning with CRM_BWAn (n is number) then
    activate these queues in the same transaction.
    4.a)If required activate the datasource
    Go to transaction BWA5 > select the required datasource and activate.
    4 b) The Delta may not be active ,activate the delta in BWA7 by selecting the name of the datsource and pressing the candle icon for 'activate delta'.
    5. In BW system
    Go to transaction RSA1 > modeling > infosources > select the infosource > right mouse click on the selected
    infosource > choose option replicate datasource
    Activate the infosource.
    6. Go to the scheduler for the infosource > select delta in the update >choose the option PSA only (in the Processing tab)
    > start immediately
    Check the entry in the RSA7 in the OLTP(CRM system)

  • Issue in CRM Delta upload to BW

    Hi,
    I need to configure the exchange of data between CRM 7.0 and BI 7.0. I am facing facing issue of Delta upload from CRM to BI. Initial upload to BI was successful but not working Delta. I need to download the activity and the opportunity. But in transaction RSA7 the delta queue displays 0 records for 0CRM_SALES_ACT_1, 0CRM_SALES_ACT_I, 0CRM_OPPT_H and 0CRM_OPPT_I. It's status is green. In the transaction SMW01 this BDoc red in an error state with the text "Could not determine module name: BUS_TRANSACTION_MESSAGE GENKEY: REP_GET_RECIPIENT" and "Service that caused the error: SMOH_REPLICATION_WRAPPER_MSG".

    Hi,
    My scenario was delta was not getting loaded within BW ods and cube... Delta was getting captured from source system but it was not getting loaded from ODS--> ods/cube....
    So i first deleted the data mart symbol from ODS (source) and then did the repeat delta...
    Regards,
    Anup

  • Delta uploading job get cancelled in SAP R/3

    question, during delta loading from SAP R/3 to BW, if the delta uploading job get cancelled twice for some reason, will I lost some delta data??
    Pls advise!
    Many Thanks!
    rajatina.

    Hi,
    If your delta jobs are getting error out in BW then you don't need to worry about, because till that time your delta pointer in source system is not yet updated. But if you make any request green by chance in BW monitor then your delta pointer will get updated and you might loose some delta.
    You can request repeat delta multiple times without any issue.
    Regards,
    Durgesh.

  • Delta Upload request from ODS is not including the Data target of planning

    Hi,
    I have a process chain in which there is a delta upload from ODS to 3 different data target.  One of the data target is the planning cube. last 2days back i have changed the process chain schedule after was the Delta request is not hapenning for Planning cube.  The process chain contains the changing the planning to load mode and load to planning mode.  Every thing is working fine but the Delta is not happening for the Planning cube.  Delta request are going correctly to the Other 2 data targets.  Now it was like Delta has excluded the Planning cube.  Another this there is nto planning package is appearing in the Infousources.  and when I am trying to upload manually from ODS to Data targets it say that No delta is there.  Please help me in this.  This is a production problem.   I have checked all the data monitors every thing is from but no delta is hapenning for the planning cube.   
    Thanks
    Naveen.

    Resolved

  • Profit center document not created for initial stock upload

    Hi Gurus
    We have created initial stock upload for one of the inventory items through movement type 561.Though the profit center was populated in the line items the profit center document has not been created and when we go and run balance sheet profit center wise there are no results for display? Any suggestions ?

    Hello,
    Check your 3KEH Settings
    Check your OKB9 account determination
    Make sure you have profit center number ranges in GB02
    Regards,
    Ravi

  • Selection condition in the infopackage for initializing delta

    How does the selection condition in the infopackage help in initializing delta?

    Hi,
    You can enter multiple single valus for any field in the infopackage. Just select the row for material type and then click on the insert duplicate button ( + sign ) which is at the bottom letf hand side in the 'Data Selection' tab within the infopackage. You will usually find this 'insert duplicate' icon next to the 'Check' push button.
    You can insert as many rows as you want for material type by select the material type rown and clicking on this icon. You can then enter the three values in the three rows for material type.
    Regards,
    Shilpa

  • Delta Upload for Flat File

    Hello Everyone
    i am srikanth. i would like to know wheather do we have a facility for Delta Upload for flat file. If yes can u please give me the steps.
    thanks in advance
    srikanth

    Hi Sabrina...thank you for ur help...i did load the data from cube to ods
    steps.
    1. i generated export data source on the cube
    2. i found the name of the cube with prefix 8<infocube name> in the infosource under DM application component.
    3. there are already communication structure and transfer rules activated but when i am creating update rules for the ods..i am getting the message 0recordmode missing in the infosource.
    4. so i went to infosource and added 0recordmode in communication structure and activated but the transfer rules in yellow colour..there was no object assigned to 0recordmode but still i activated.
    5.again i went to ods and created update rules and activated (tis time i didnt get any message about 0recordmode).
    6.i created infopackage and loaded.
    a)Now my question is without green signal in the transfer rule how data populated into the ods and in your answer you mentioned to create communication structure and transfer rules where in i didnt do anything.
    b) will i b facing any problem if i keep loading the data into the ods from cube (in yellow signal) ..is it a correct procedure..plz correct me..thanks in advance

  • RSA7 shows zero records for delta upload of 2LIS_03_BF Datasource

    Dear Professionals,
    I am having constant issues with inventory management DataSource (2LIS_03_BF). I scheduled delta upload in r3 production using LBWE, keeping in mind that in LBWE there is no options for posting dates, ETC... In RSA3, there are records, but when i check RSA7, it is showing 0 records. What could be the problem. Do i need to do anything/activation anywhere in LBWE or RSA7 to see the records. Please advise.

    Hi,
    Normally there should be a collective run which transfers data from the application-specific queues to the BW delta queue (RSA7), just like this workflow:
    MCEX03 queue==> RMBWV03 (Collective run job) ==> RSA7-Delta queue => BW
    It is necessary to schedule the job control regularly - see point 3 of SAP Note 505700.
    Check also these SAP Notes:
    869628     Constant WAITUPDA in SMQ1 and performance optimization
    728687     Delta queued: No data in RSA7
    527481     tRFC or qRFC calls are not processed
    739863    Repairing data in BW
    Rgds,
    Colum

  • Routine,delta upload

    Hi experts,
    i am new to bw and sdn .
    can u answer for my questions ,i was asked in my interview.
    1)what is the scenario of start routine?
    2)how to generate a report for present year and previous three years?
    3)what is the mechanism behind  delta upload?
    thanks in advance
    regards
    krisna

    Hi Krishna,
    1) Start Routine - Start routine is executed prior to executing of transfer rules, so if there is any global variable to be used in all transfer rules then it is better to declare that in start routine.
    After start routine execution is over then transfer rules r executed.
    Start routine are at two levels
    1. update roule
    2. transfer rules
    start routine is processed once per data package load .For ex : you want to eliminate a set of records based on dome criteria you can do that with start routine . But update rules or transfer rules are processed once per data record where you can manipulate each single record .
    There is an internal table called data_package which will have all the data available for processing you can later store all the data in another internal table (you can declare) which can later be used in update rules .
    3) Delta Upload Mechanism - Regarding the Delta upload mechanism, it's simply the mechanism that helps updating only the changed data, and not the full update. The field 0RECORDMODE determines whether the records are added to or overwritten. It determines how a record is updated in the delta process: A blank character signifies an after image, ‘X’ a before image, ‘D’ deletes the record and ‘R’ means a reverse image.
    You can check following link for details.
    http://help.sap.com/saphelp_erp2004/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    Regards,
    Ashish.

  • Filter Delta Upload from CRM into R3

    Hi SAP gurus,
    How can i set the filter for delta upload from CRM into R3? As far as i know, the filter settings in R3AC1 is only applicable for data exchange from the source system R3. What if i would like to filter the data where the source is CRM instead? Did i miss out anything in the configuration? I have been able to filter data coming from R3, but NOT data from CRM going into R3.
    Would appreciate your help on this.
    Thanks. Points will be rewarded.

    Do you set all req.customizing in tr smoeac?

  • Delta Upload Problem

    Hi All,
    I have a ods which feeds the cube, i designed this to facilitate delta capability to cube.i loaded 17000 records(delta upload) to ODS and it says transfered-17000 and added-17000 but only 12000 records have been transfered to the cube and there are no routines in the update rules of cube from Ods, i am not sure why its only transfered 12000 records to cube when the added records in ODS are 17000.
    Thanks,
    Shetty.

    Hi Shetty.
       If you are having Keys as key1 key2 key3 key4 and Qty and value. If you want to make it overwrite you have load in overwrite mode.
    It works like this:
    key1 key2 key3 key4 Qty value
    A     B   C    D    10  100  -->> already there
    if you are loading new data from Flat file in overwrite mode contains below data then,
    It works like this:
    key1 key2 key3 key4 Qty value
    A     B   C    D    15  150 
    A     B   C    E    20  200
    After this load your ODC data will be
    key1 key2 key3 key4 Qty value
    A     B   C    D    15  150 
    A     B   C    E    20  200
    Hope it Helps
    Srini

  • Validation for initial budget upload in FMBB

    Hi,
    I have one requirement where client want a validation or rule, when they upload the budget for one group of commitment item and fund center then user should not be allowed again using the same document type initial budget upload to upload the budget.
    Please help me to resolve the issue.
    Regards,
    Alok

    Hi,
    You could use user-exit SAPLKBPB on header level (EXIT_SAPLKBPB_002).
    Regards,
    Eli

Maybe you are looking for