Initial download DNL_CUST_CNDALL failed

Hi,
I am doing initial download of DNL_CUST_CNDALL from ECC6 to CRM7.0. it was shown as as successful in R3AM1 but no data was transferred. When I checked in SLG1 and CND_MAP_LOG_DISPLAY it shows the error message " Value correction USE_NAMESPACE in table /SAPCND/T681 failed"
Any idea what could be the problem. RFC connection etc are working fine as i could load some other object.
Thanks in advance for any help.
LK

Hi Luvkush,
CRM table /SAPCND/T681T is a text table for table /SAPCND/T681. In the R/3 system, the corresponding text table T681T has a key field SETYP which no longer exists in the CRM table.
If these records are exchanged between the R/3 OLTP system and CRM system, the system updates that record with the first SETYP value which occurs in exchange object, generally, this is inital, and all other records can no longer be updated due to identical key and system issues the error.
You can also refer to note 314315 for detailed understanding.
Hope this helps you.
Regards,
Madde

Similar Messages

  • Initial download problem with DNL_CUST_CNDALL

    When I am trying to download the DNL_CUST_CNDALL, it status is in waiting for a long time.
    I checked in SMQ2 inbound queue of CRM the status is in Ready for the R3AI_DNL_CUST_CNDALL.
    I am unable to find the error?
    It is very urgent, the connection is working fine.
    Thanks in advance

    Hello Friend,
    I had similar problem, and I sent message to SAP, and they answered me DNL_CUST_CNDALL contain all customizing objects, i.e. pricing procedures etc. and in general problems occurs.
    They asked me to create a new object similar DNL_CUST_CNDALL  and insert filter for all tables and reply only the necessary data.
    I did this and works, but to do this you need SD consultant help, to tell you which filter you must use.
    At SAP documentation “CRM Customizing Replication (B09)” you can find the follow text:
    Page 14.
    An important prerequisite to the successful initial download of condition customizing is that all the necessary filter settings are in place. Without using a filter all customizing objects, i.e. pricing procedures etc. are replicated.
    For that reason it would be a good option not to use object DNL_CUST_CNDALL for the download of condition customizing but to create another object (for example YDNL_CUST_CNDALL) and to set up the filters according your business needs
    When creating a new condition customizing download object you should work together with an SD consultant with profound pricing knowledge to define the tables and filter settings being used
    Other important thing
    Page 16
    DNL_CUST_CNDALL includes all data including client independent and dependent tables and all those tables are in active mode. DNL_CUST_CND also includes client independent and dependent tables but only client dependent tables are in active mode, and DNL_CUST_PRC and DNL_CUST_FGD only includes client dependent tables and they are in active mode.
    SAP recommends you to load DNL_CUST_CNDALL into only one specific client for one system and other clients should individually load DNL_CUST_CND, DNL_CUST_PRC, and DNL_CUST_FGD instead of DNL_CUST_CNDALL. Object DNL_CUST_CNDALL in other clients should be deleted
    Regards,
    Lalas

  • Download Manager - failing with error 400 Bad Request

    Each time I try to download some patches from the download basket I get this error: The request failed: 400.  Download Manager says the files are Partially Downloaded but the downloads never complete (they just cycle round one after another attempting each download before failing).  The connection to SAP ssems to be made correctly (see trace file extract below)
    I'm running JRE version 1.4.2_12; download manager ver 2.1.130.  I've tried uninstalling & reinstalling JRE & download manager (numerous times).  Does anyone have any suggestions about what might be the cause?
    Thanks, Chris
    PS - This is the relevant part of the trace file:
    24-Aug-2007 09:29:06   Opening connection to 'https://smpdla.sap.com:443/00000084/217/KGPHA68.CAR?object_id=011000358700000405252007E&filepath=00000084\217\KGPHA68.CAR&uid=S0003245349'
    24-Aug-2007 09:29:06   Sending request to SAP Service Marketplace Server (no tunneling)
    24-Aug-2007 09:29:13   A response was received from the SAP Service Marketplace Server.
    24-Aug-2007 09:29:13   Response received: 400 Bad Request
    24-Aug-2007 09:29:13   Response Http Headers:
    24-Aug-2007 09:29:13      Server=AkamaiGHost
    24-Aug-2007 09:29:13      Mime-Version=1.0
    24-Aug-2007 09:29:13      Content-Type=text/html
    24-Aug-2007 09:29:13      Content-Length=340
    24-Aug-2007 09:29:13      Expires=Fri, 24 Aug 2007 08:28:49 GMT
    24-Aug-2007 09:29:13      Date=Fri, 24 Aug 2007 08:28:49 GMT
    24-Aug-2007 09:29:13      Connection=close
    24-Aug-2007 09:29:13   Response code: 400
    24-Aug-2007 09:29:18   Notifying subscribers of download state ...
    24-Aug-2007 09:29:18   The download has terminated ...
    24-Aug-2007 09:29:18   getUserProxy: true
    24-Aug-2007 09:29:18   getEffectiveProtocol: http
    24-Aug-2007 09:29:18   detected: http / https w/o proxy request
    24-Aug-2007 09:29:18   SMPResponse::sendRequestNormal
    24-Aug-2007 09:29:18   Opening connection to 'http://service.sap.com:80/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'
    24-Aug-2007 09:29:18   Sending request to SAP Service Marketplace Server (no tunneling)
    24-Aug-2007 09:29:25   A response was received from the SAP Service Marketplace Server.
    24-Aug-2007 09:29:25   Redirecting to 'https://WEBSMP108.SAP-AG.DE/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'...
    24-Aug-2007 09:29:25   getUserProxy: true
    24-Aug-2007 09:29:25   getEffectiveProtocol: https
    24-Aug-2007 09:29:25   detected: http / https w/o proxy request
    24-Aug-2007 09:29:25   SMPResponse::sendRequestNormal
    24-Aug-2007 09:29:25   Opening connection to 'https://WEBSMP108.SAP-AG.DE/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'
    24-Aug-2007 09:29:25   Sending request to SAP Service Marketplace Server (no tunneling)
    24-Aug-2007 09:29:25   A response was received from the SAP Service Marketplace Server.
    24-Aug-2007 09:29:25   Response received: 200 OK
    24-Aug-2007 09:29:25   Response Http Headers:
    24-Aug-2007 09:29:25      Date=Fri, 24 Aug 2007 08:29:02 GMT
    24-Aug-2007 09:29:25      Server=Microsoft-IIS/6.0
    24-Aug-2007 09:29:25      Content-Type=text/plain
    24-Aug-2007 09:29:25      Content-Length=44
    24-Aug-2007 09:29:25   getUserProxy: true
    24-Aug-2007 09:29:25   getEffectiveProtocol: http
    24-Aug-2007 09:29:25   detected: http / https w/o proxy request
    24-Aug-2007 09:29:25   SMPResponse::sendRequestNormal
    24-Aug-2007 09:29:25   Opening connection to 'http://service.sap.com:80/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'
    24-Aug-2007 09:29:25   Sending request to SAP Service Marketplace Server (no tunneling)
    24-Aug-2007 09:29:25   A response was received from the SAP Service Marketplace Server.
    24-Aug-2007 09:29:25   Redirecting to 'https://WEBSMP209.SAP-AG.DE/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'...
    24-Aug-2007 09:29:25   getUserProxy: true
    24-Aug-2007 09:29:25   getEffectiveProtocol: https
    24-Aug-2007 09:29:25   detected: http / https w/o proxy request
    24-Aug-2007 09:29:25   SMPResponse::sendRequestNormal
    24-Aug-2007 09:29:25   Opening connection to 'https://WEBSMP209.SAP-AG.DE/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'
    24-Aug-2007 09:29:25   Sending request to SAP Service Marketplace Server (no tunneling)
    24-Aug-2007 09:29:26   A response was received from the SAP Service Marketplace Server.
    24-Aug-2007 09:29:26   Response received: 200 OK
    24-Aug-2007 09:29:26   Response Http Headers:
    24-Aug-2007 09:29:26      Date=Fri, 24 Aug 2007 08:29:03 GMT
    24-Aug-2007 09:29:26      Server=Microsoft-IIS/6.0
    24-Aug-2007 09:29:26      Content-Type=text/html
    24-Aug-2007 09:29:26      Content-Length=2416
    24-Aug-2007 09:29:26   Number of URLs: 1
    24-Aug-2007 09:29:26   Description lines: 56
    24-Aug-2007 09:29:26   Adding HTTP1/1 Header: Range: bytes=0-*
    24-Aug-2007 09:29:26   getUserProxy: true
    24-Aug-2007 09:29:26   getEffectiveProtocol: https
    24-Aug-2007 09:29:26   detected: http / https w/o proxy request
    24-Aug-2007 09:29:26   SMPResponse::sendRequestNormal
    24-Aug-2007 09:29:26   Opening connection to 'https://smpdla.sap.com:443/00000085/652/KGPHA69.CAR?object_id=011000358700000485532007E&filepath=00000085\652\KGPHA69.CAR&uid=S0003245349'
    24-Aug-2007 09:29:26   Sending request to SAP Service Marketplace Server (no tunneling)
    24-Aug-2007 09:29:33   A response was received from the SAP Service Marketplace Server.
    24-Aug-2007 09:29:33   Response received: 400 Bad Request
    24-Aug-2007 09:29:33   Response Http Headers:

    Yes - I've checked the address w're pointing to & have rechecked several times with our network people re: the proxy.
    The trace seems to show that we're certainly making the initial connections to SAP OK - it just gives up after a few redirections.
    Chris

  • Query Regarding Initial Download

    Hello,
    I am facing quite some problems while doing an initial download of customizing objects from R/3 to CRM.
    1. Are number ranges and PIDE settings mandatory for initial download of customizing objects? I am asking this question because
          a. while downloading DNL_CUST_CNDALL object, I am getting A BDOC message
    1. "Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
                 2. "Acct Group KUNA do not exist",
                 3. "Partner PAC-CUST(00215A491AF21ED18AF18C8F4A05AFC2): the following errors occurred"
          b. While downloading DNL_CUST_KTOKD, I am geting BDoc messages:
    1. Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
                 2. Business partner with GUID 00215A491AF21ED18AF0B11059A4CFC2 does not exist
                 3. Partner BP7778(00215A491AF21ED18AF0B11059A4CFC2): the following errors occurred
    2. Is there a particular order in which we have to download customizing objects? like some objects must be downloaded first before downloading other objects.
    Please help
    Regards,
    Harsh

    Hi Harsh,
    DNL_CUST_CONDALL is the adapter object for condition download & DNL_CUST_KTOKD for account groups in ECC.
    As i mentioned above that the Download of DNL_CUST_CONDALL is concern with the download of the condtion & condition techniques fron=m ECC to CRM. this is the part of the master data but not customising.Condition technique will have the condition tables with various combination. For example sales area -- business partner/cutomer -- discounts. If you download this object without having Business partner and sales area in CRM system you are bound to get the validation error.
    In your case, your condition table must be having a customer data which is not present in CRM, thats why probably you are getting the error.
    Before downloading the condition objects
    Down load -- customising for BP
    Down load -- customising for product
    Down load -- Business object for BP
    Down load -- Business object for Product
    Set your org structure and do the ECC mapping
    Down load -- Business object & customizing for condition.
    I hope this helps.
    Thanks & Kind Regards,
    Amit
    Edited by: amitmirande on Dec 22, 2011 10:50 PM

  • Problem with initial download of a data object

    Dear All,
    I have created a data object named "EQUIPMENT", which has three nodes. EQUIPMENT is the header node, DETAILS is the child node to EQUIPMENT and LOCATION is the child node to DETAILS. I have also done explicit key mapping to DETAILS and LOCATION.
    I have selected the following as the BE Keys in the nodes.
    SERIAL NO in EQUIPMENT header node.
    TYPE in DETAILS node.
    ZIPCODE in LOCATION node.
    In the explicit key mapping of DETAILS node we have selected "SERIAL NO" field in this node.
    In the explicit key mapping of LOCATION node we have selected "SERIAL NO" and "TYPE" fields in this node.
    Data object contains no errors and i have activated the data object and it was successful.
    Then i have also created back adapter which has EQUIPMENT get list and get detail. Get list returns only serial numbers (which is the BE key in EQUIPMENT node). Get detail takes "serail no" as input, returns "DETAILS" and "LOCATION" data in tables parameter. I have tested the get list and get detail interfaces, they are working fine. Then i have activated back end adapter and that was successful.
    Now i have triggered an initial download for the  "EQUIPMENT" data object, but there is no data downloaded into the data object. I have checked the monitoring in administration portal, it is showing status "Ended with errors", but there is no details of an error.
    So can you please let me know what could be mistake i have done or how to check what is the error. Please help us to resolve the issue.
    Regards,
    Kiran.

    Hi Kiran
    Are you checking in the NWMA>>Monitoring>>Logs and Traces>>Backend Integration?  The logs should have the proper error.
    If not can you regenerate the DO, edit and activate your adapter and try again?
    Regards
    Rohith

  • Problem with initial download from R/3 to CRM

    Hello All,
    Initial we were able to download & replicate all object from CRM to R/3  & vice versa such as product ,BP, sales documents & conditions etc. After that <<removed>> R/3 system was refreshed by Client itself. After refresh, connectivity between R/3 & CRM is disturbed.We have observed that while initial download we are facing problem in SMQ1 & SMQ2. After debugging we found that table entry  i.e. table :- CRMMLSGUID from CRM & CRMPRLS from R/3 have Logical system guid values different( which  should be identical). Because of this no replication is happening between CRM & R/3. How to rectify this?
    Regards
    Priyanka
    Edited by: Rob Burbank on Dec 9, 2011 4:37 PM

    Hello,
    see note 588701:
    "The queues are deliberately halted since the change of the logical       
    system name in the R/3 backend or the linking of new R/3 backend clients 
    to a client of the EBP/CRM Server with the same logical system name as a 
    client already linked to the R/3 backend would lead to severe data       
    inconsistencies in various CRM applications.                             
    For this reason, such changes are not allowed on principle. The halting  
    of the queues prevents such data inconsistencies. The following          
    situations may lead to the queues being halted:                                                                               
    o  The logical system of a client of an R/3 Backend system linked to 
           the EBP/CRM server was changed in current operation.                                                                               
    o  A new client of an R/3 Backend system or a client of a new R/3    
           Backend system was linked to an existing client of the EBP/CRM    
           server where the logical system name was already assigned to a    
           client of an R/3 Backend system linked to the CRM server before.  
    There are different cases in which different forms of processing are      
    required or where several options exist:                                                                               
    -  The logical system name of an R/3 Backend client was changed    
              in current operation. In this case, the data hangs in the       
              outbound queues of the R/3 Backend system as specified under    
              point 1 of the symptom. In this case, the logical system name   
                                                                     Seite 2                                                                               
    must be changed back to the original value. Then the outbound   
              queues can be reactivated. If no data was transferred to the    
              EBP/CRM server before the change, also a correctioin of the     
              check table is possible.                                                                               
    -  The same logical system name was used again in a new client of  
              an R/3 Backend system that was linked to the EBP/CRM server.    
              In this case, the data is in the inbound queue of the EBP/CRM   
              server with the exception GUID_FOR_LOGSYS_CHANGED. In this      
              case, the queue entries which have status SYSFAIL must be       
              rejected, however, not the entire queues. If the new client of  
              the R/3 Backend system you have linked has exactly the same     
              data as the old client and if it is meant to replace the old    
              client (that is, this was deactivated), also a correction of    
              the check tables is possible. In this case, the inbound queues  
              can be reactivated after the correction.                        
    The correction of the corresponding check tables or the correct           
    procecure in individual cases is to be agreed upon with the support of    
    SAP or SAP consultants at the customer site. In justified cases, SAP can  
    carry out the correction of the check tables.           "

  • Initial download of Z contract table from R/3 to CRM

    Hi,
    We have two contract tables called ZCONTRACTHEAD and ZCONTRACTITEM in our R/3 system which we bring to our CRM system to the same respective tables.
    We use a downloadable object ZZCONN_HEAD and ZZCONN_ITEM in transaction r3ac1 and do an initial download using r3as.
    My problem is that in CRD client 200 which is mapped to R/3 client 200, this download does not bring any data into CRM. The download says complete but I get a BDOC error in SMW01 saying validation error.
    This download works perfectly fine in CRD client 100 which is mapped to R/3 client 600.
    I know that this is custom table and not a SAP standard table. But I really don't understand why this would work in one client and not in the other client. I have checked the RFC destinations and also did some other initial downloads on CRD 200 which works fine except for this particular table.
    Could you please give me your opinion on how can I debug this and find where is the problem? After doing few debugging myself I found out that I am getting the validation error in BDOC in CRD client 200 is because the intitial download is not bringing any record from R/3.
    Due to this problem our contract pricing is not working on our DEV system and I am not able to do any further tests or enhancements.
    Any suggestion or insight on this will be very helpful.
    Thanks,
    Prasoon

    Hi Michael,
    Thanks for your reply. I tried to debug the initial trasfer from CRM to R/3 but I am not able to debug the function in R/3. Also when I do a Test Function module in R/3 I am not sure as what correct parameter to put. I did refer few OSS notes 656823and 573857 but was not able to debug it in R/3. We are on CRM 3.0 Service Pack 14. Could you please suggest as to how can I debug this initial download ?
    Since this initial load works perfectly fine in the other client(100) and not in in client 200, I am not sure what could be the problem.
    Any suggestions will be appreciated.
    Thanks,
    Prasoon

  • Issue in Initial Download R/3 and CRM

    Hi,
    I am trying to do an initial download from R/3 to CRM. But I get a "SYSFAIL" status. On checking the transaction SMQ1 on ERP side, I see that RFC destination point to self for which the connection type is "I" i.e. Internal. I also tried to change the RFC destination, then it gives a message "No LUW exists in the Specified Queue".
    I have referred to the note number 588701 and checked everything is fine according to that note.
    All necessary entries have been maintained in CRMCONSUM, CRMRFCPAR. the queues have been registered correctly. Entries in SMOEAC transaction are also checked and they are fine.
    Please guide me here.
    Harsh

    The issue has been resolved after applying note 760518 as R/3 was a system copy and a wrong entry was maintained in the table CRMPRLS.
    Note: Please get in touch with your admin or an ABAP coder before applying this note.
    Harsh

  • Business partner Initial Download

    Here is description of Business Partner setup:
    CRM - Account groups - Prospective - Soldto
                                            Soldto
                                            Shipto
    ECC- Account groups - soldto
                                           Shipto
    There are some more but in order to ask my question i have listed few:
    We are converting data from Legacy system and it is new SAP ECC/CRM Implementation
    We are going to create Prospective in CRM will replicate it to ECC under classification Prospect
    In ECC we will do account group switch from Prospect to Customer keeping business partner id same by defining same number range for Prospect and Customer account group in ECC. By middlware enhancment we will replicate customer to CRM and change prospect to Customer in CRM keep same business partner number.
    My Question is for Legacy Data conversion:
    Data conversion strategy is to load data to ECC system and then do Intial download to CRM.
    My concern is how does initial download work in terms of numbering the BP. I am going to load all customers in ECC and download to CRM.
    Once we are done with initial download we will fall back to strategy of creating prospect in CRM and later doing account group switch in ECC to customer so number range in ECC is external for customers. But for data conversion legacy system is going to hit ECC -- How do we control number range ?

    Hi Murali,
    As backend ERP system was a pretty old system, we had to implement 1067977. After this, the Middeware was working fine.
    Sunil,
    You could try implementing this note to solve your problem
    Thanks & Regards,
    Karthik
    Edited by: Krishna Karthik Puttagunta on Feb 8, 2008 11:29 AM

  • Error: Initial Download of Materials

    Hello,
    I came across these errors with initial download for materials. I had downloaded relevant cutomizing objects, dnl_cust_prod, -prod1, -prod3, -plnt etc.
    Pls suggest any resolutions for the issues listed here.
    1 Assign product &1 to a category from hierarchy &2
    2 Data on set type & cannot be maintained
    3 Logical system &1 does not exist in table TBDLS
    4 Category for R/3 product hierarchy & does not exist
    5 No descriptions exist for product &1
    6 Enter a base unit of measure
    Issues:
    2. Set types 'COMM_PR_MAT' and 'BBPM_PR_GENERAL'are missing in CRM. Can these be entered manually in CRM. These set types were not created in CRM with customizied download of objects.
    3. Does logical system name and RFC destination name has to be maintained same?
    4. Can the specific category be created manually in CRM. OR does it have to be done with cutomized objects download.
    5. Description is given in R/3 for the product
    6. Is the 'base unit of measure' different from 'unit of measure'. How to specifically maintain 'base unit of measure' in CRM
    Your help is greatly appreciated and rewarded.
    Regards,
    Jay

    Hello Sebstian,
    First check the B doc status in  T CODE SMW01,where you select the error or aborted,and give your linked Bdoc with
    business obj material in t code R3AC1.
    Than in SMW01 goto environment check object link,here u will find the error of this object. If it needs, u have to run request for this object in R3AR2.
    I hope it will help you
    regards
    naren..

  • Help with initial download....do I have right version?

    My initial download/import to populate Photoshop Elements 13 stopped working (responding) at about 80%...If i re-download, will it duplicate the first 80%?
    Also, when entering the forum it asked which product I had questions about...I would like to know the difference between Photoshop, Photoshop Lightroom & Photoshop Elements...
    I was looking to purchase a fully  functioning 'photo/picture' program for my new Toshiba (previously a Mac user) and know nothing!  Did I get the right one?  Is this a stand alone program?  I have a MASSIVE photo endeavor and want to be set up in the best way before I begin organizing 50 years of pix!
    Thank you!!!!
    Meredith
    Lafayette CO

    Meredith wrote:
    My initial download/import to populate Photoshop Elements 13 stopped working (responding) at about 80%...If i re-download, will it duplicate the first 80%?
    Where did you download from?  Was it installed or just downloaded?  Did you purchase it or are you using the trial?
    I would like to know the difference between Photoshop, Photoshop Lightroom & Photoshop Elements...
    See here:
    FAQ: Why is Photoshop Elements cheaper? What's different about Photoshop?
    I was looking to purchase a fully  functioning 'photo/picture' program for my new Toshiba (previously a Mac user) and know nothing!  Did I get the right one?  Is this a stand alone program?  I have a MASSIVE photo endeavor and want to be set up in the best way before I begin organizing 50 years of pix!
    Photoshop Elements will work for you.

  • I have an iPhone 4 and the iOS 4.3.5 download keeps failing - error states its corrupted.

    I have an iPhone 4 and the iOS 4.3.5 download keeps failing.  It downloads then I get a message stating that the download was corrupted and couldn't be installed.  I've tried it with bitdefender switched off.  I've tried it with it in airplane mode.  My partner has tried to update their iPhone on a different computer to mine and is also getting the same problem and error message.  Help!

    That's exactly right.  And since you have a MacBook Air (as I do), that means the synching should occur just fine (if you've set it up right in iTunes).  In other words, once you actually do the update, the iTunes on your MacBook Air will re-sync your photos back to your iPhone.
    Basically, the process is that your iPhone gets backed up, wiped clean, then the new iOS version gets installed, then the backup gets restored.  That will restore everything in the article above, which does not include your photos.  But the sync process that happens after the iOS installation would restore your photos from iPhoto given you've set it up that way in iTunes.
    When you have your iPhone plugged into iTunes, while looking at the iPhone's summary page, click "Photos" on the right side of iTunes to see how you have your sync set up.
    Regardless, it sounds like you'll be fine!  Your photos will wind up in iPhoto once you place them there.  They will be safe there.

  • Mat. for Initial Download: Table not supported by function "C_"

    Hi All,
    We are in SRM 5.0 & ECC 6.0 with Classic scenario. While uploading the MATERIAL through R3AS, we have the "Mat. for Initial Download: Table not supported by function C_" & "No product ID determined for material number ... of logical system" error in SMW01.
    In SMQ2 in SRM, Queue is blocked with "Error in Mapping (Details: transaction SMW01)"
    For your information RFC Users at both the ends have SAP_ALL authorisation. SAP Notes 720819, 420980 & 432339 are implemented.
    Please guide me to resolve this issue.
    Regards
    Ashutosh

    hi,
    How was the issue resolved , i am having the same problem.
    can somebody provide with clue
    regards

  • Error from Cisco Agent Desktop - The agent- or workflow-initiated action request failed.

    We have roughly 20 agents using Cisco Agent Desktop version 85.1.417 and I have one that when she clicks the phone button to answer a call she gets the error: "The agent-  or workflow-initiated action request failed."
    I reinstalled the program, but she still receives the same error.  What could be causing this problem?

    This is what I found in the log:
    2014-10-06 08:59:46:838 INFO VOIP2021 Desktop monitoring enabled for extension [9214].
    2014-10-06 09:00:12:147 WARN STD3000 Get registry key <MTS_CitrixInstall> under path <SOFTWARE\Calabrio\CAD\Site Setup>. Object not found: <2:The system cannot find the file specified.>.
    2014-10-06 09:00:12:159 INFO SOCKET0000 <CADEEMConnector> service on port <59015> has started.
    2014-10-06 09:01:01:580 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781617 != 37533406)
    2014-10-06 09:09:28:543 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781655 != 37533406)
    2014-10-06 09:13:42:458 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781669 != 37533406)
    2014-10-06 09:29:03:809 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781740 != 37533406)
    I'm attaching part of the DBG log.  I hope that it helps.
    Thanks

  • Initial Download

    Hi Everybody
    I am performing the initial download and defined the logical systems, client systems, set up the RFC USER, sites, subscriptions and the rest of the configuration settings and I am at a junction not knowing what to do next..
    Could someone help with the steps from this juncture.
    Cheers
    Jessy

    Hi Buddy
    I meant
    C71: CRM Connectivity
    B09: CRM Customizing Replication
    C03: CRM Master and Transaction Data Replication
    available on http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
    Hope this will help
    Regards,
    Rekha Dadwal
    <b>You gain a point for every point that you reward. So reward helpful answers generously</b>

Maybe you are looking for