Initial download is locked up
clicked on down load; seemed like nothing happened so clicked again. now download is stuck
Hi there copper102,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Similar Messages
-
The download can be any type of file video, word, etc. After the initial download I can view it, but if I try to open the file later I can't.
[[Firefox is already running but is not responding]] has steps that you can try. It sounds like you may have something that is hanging your browser on exit (probably an extension or a locked profile) and the steps on that page should help clear it up.
-
Problem with initial download of a data object
Dear All,
I have created a data object named "EQUIPMENT", which has three nodes. EQUIPMENT is the header node, DETAILS is the child node to EQUIPMENT and LOCATION is the child node to DETAILS. I have also done explicit key mapping to DETAILS and LOCATION.
I have selected the following as the BE Keys in the nodes.
SERIAL NO in EQUIPMENT header node.
TYPE in DETAILS node.
ZIPCODE in LOCATION node.
In the explicit key mapping of DETAILS node we have selected "SERIAL NO" field in this node.
In the explicit key mapping of LOCATION node we have selected "SERIAL NO" and "TYPE" fields in this node.
Data object contains no errors and i have activated the data object and it was successful.
Then i have also created back adapter which has EQUIPMENT get list and get detail. Get list returns only serial numbers (which is the BE key in EQUIPMENT node). Get detail takes "serail no" as input, returns "DETAILS" and "LOCATION" data in tables parameter. I have tested the get list and get detail interfaces, they are working fine. Then i have activated back end adapter and that was successful.
Now i have triggered an initial download for the "EQUIPMENT" data object, but there is no data downloaded into the data object. I have checked the monitoring in administration portal, it is showing status "Ended with errors", but there is no details of an error.
So can you please let me know what could be mistake i have done or how to check what is the error. Please help us to resolve the issue.
Regards,
Kiran.Hi Kiran
Are you checking in the NWMA>>Monitoring>>Logs and Traces>>Backend Integration? The logs should have the proper error.
If not can you regenerate the DO, edit and activate your adapter and try again?
Regards
Rohith -
Problem with initial download from R/3 to CRM
Hello All,
Initial we were able to download & replicate all object from CRM to R/3 & vice versa such as product ,BP, sales documents & conditions etc. After that <<removed>> R/3 system was refreshed by Client itself. After refresh, connectivity between R/3 & CRM is disturbed.We have observed that while initial download we are facing problem in SMQ1 & SMQ2. After debugging we found that table entry i.e. table :- CRMMLSGUID from CRM & CRMPRLS from R/3 have Logical system guid values different( which should be identical). Because of this no replication is happening between CRM & R/3. How to rectify this?
Regards
Priyanka
Edited by: Rob Burbank on Dec 9, 2011 4:37 PMHello,
see note 588701:
"The queues are deliberately halted since the change of the logical
system name in the R/3 backend or the linking of new R/3 backend clients
to a client of the EBP/CRM Server with the same logical system name as a
client already linked to the R/3 backend would lead to severe data
inconsistencies in various CRM applications.
For this reason, such changes are not allowed on principle. The halting
of the queues prevents such data inconsistencies. The following
situations may lead to the queues being halted:
o The logical system of a client of an R/3 Backend system linked to
the EBP/CRM server was changed in current operation.
o A new client of an R/3 Backend system or a client of a new R/3
Backend system was linked to an existing client of the EBP/CRM
server where the logical system name was already assigned to a
client of an R/3 Backend system linked to the CRM server before.
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed
in current operation. In this case, the data hangs in the
outbound queues of the R/3 Backend system as specified under
point 1 of the symptom. In this case, the logical system name
Seite 2
must be changed back to the original value. Then the outbound
queues can be reactivated. If no data was transferred to the
EBP/CRM server before the change, also a correctioin of the
check table is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server.
In this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be
rejected, however, not the entire queues. If the new client of
the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
The correction of the corresponding check tables or the correct
procecure in individual cases is to be agreed upon with the support of
SAP or SAP consultants at the customer site. In justified cases, SAP can
carry out the correction of the check tables. " -
Initial download of Z contract table from R/3 to CRM
Hi,
We have two contract tables called ZCONTRACTHEAD and ZCONTRACTITEM in our R/3 system which we bring to our CRM system to the same respective tables.
We use a downloadable object ZZCONN_HEAD and ZZCONN_ITEM in transaction r3ac1 and do an initial download using r3as.
My problem is that in CRD client 200 which is mapped to R/3 client 200, this download does not bring any data into CRM. The download says complete but I get a BDOC error in SMW01 saying validation error.
This download works perfectly fine in CRD client 100 which is mapped to R/3 client 600.
I know that this is custom table and not a SAP standard table. But I really don't understand why this would work in one client and not in the other client. I have checked the RFC destinations and also did some other initial downloads on CRD 200 which works fine except for this particular table.
Could you please give me your opinion on how can I debug this and find where is the problem? After doing few debugging myself I found out that I am getting the validation error in BDOC in CRD client 200 is because the intitial download is not bringing any record from R/3.
Due to this problem our contract pricing is not working on our DEV system and I am not able to do any further tests or enhancements.
Any suggestion or insight on this will be very helpful.
Thanks,
PrasoonHi Michael,
Thanks for your reply. I tried to debug the initial trasfer from CRM to R/3 but I am not able to debug the function in R/3. Also when I do a Test Function module in R/3 I am not sure as what correct parameter to put. I did refer few OSS notes 656823and 573857 but was not able to debug it in R/3. We are on CRM 3.0 Service Pack 14. Could you please suggest as to how can I debug this initial download ?
Since this initial load works perfectly fine in the other client(100) and not in in client 200, I am not sure what could be the problem.
Any suggestions will be appreciated.
Thanks,
Prasoon -
Issue in Initial Download R/3 and CRM
Hi,
I am trying to do an initial download from R/3 to CRM. But I get a "SYSFAIL" status. On checking the transaction SMQ1 on ERP side, I see that RFC destination point to self for which the connection type is "I" i.e. Internal. I also tried to change the RFC destination, then it gives a message "No LUW exists in the Specified Queue".
I have referred to the note number 588701 and checked everything is fine according to that note.
All necessary entries have been maintained in CRMCONSUM, CRMRFCPAR. the queues have been registered correctly. Entries in SMOEAC transaction are also checked and they are fine.
Please guide me here.
HarshThe issue has been resolved after applying note 760518 as R/3 was a system copy and a wrong entry was maintained in the table CRMPRLS.
Note: Please get in touch with your admin or an ABAP coder before applying this note.
Harsh -
Business partner Initial Download
Here is description of Business Partner setup:
CRM - Account groups - Prospective - Soldto
Soldto
Shipto
ECC- Account groups - soldto
Shipto
There are some more but in order to ask my question i have listed few:
We are converting data from Legacy system and it is new SAP ECC/CRM Implementation
We are going to create Prospective in CRM will replicate it to ECC under classification Prospect
In ECC we will do account group switch from Prospect to Customer keeping business partner id same by defining same number range for Prospect and Customer account group in ECC. By middlware enhancment we will replicate customer to CRM and change prospect to Customer in CRM keep same business partner number.
My Question is for Legacy Data conversion:
Data conversion strategy is to load data to ECC system and then do Intial download to CRM.
My concern is how does initial download work in terms of numbering the BP. I am going to load all customers in ECC and download to CRM.
Once we are done with initial download we will fall back to strategy of creating prospect in CRM and later doing account group switch in ECC to customer so number range in ECC is external for customers. But for data conversion legacy system is going to hit ECC -- How do we control number range ?Hi Murali,
As backend ERP system was a pretty old system, we had to implement 1067977. After this, the Middeware was working fine.
Sunil,
You could try implementing this note to solve your problem
Thanks & Regards,
Karthik
Edited by: Krishna Karthik Puttagunta on Feb 8, 2008 11:29 AM -
Error: Initial Download of Materials
Hello,
I came across these errors with initial download for materials. I had downloaded relevant cutomizing objects, dnl_cust_prod, -prod1, -prod3, -plnt etc.
Pls suggest any resolutions for the issues listed here.
1 Assign product &1 to a category from hierarchy &2
2 Data on set type & cannot be maintained
3 Logical system &1 does not exist in table TBDLS
4 Category for R/3 product hierarchy & does not exist
5 No descriptions exist for product &1
6 Enter a base unit of measure
Issues:
2. Set types 'COMM_PR_MAT' and 'BBPM_PR_GENERAL'are missing in CRM. Can these be entered manually in CRM. These set types were not created in CRM with customizied download of objects.
3. Does logical system name and RFC destination name has to be maintained same?
4. Can the specific category be created manually in CRM. OR does it have to be done with cutomized objects download.
5. Description is given in R/3 for the product
6. Is the 'base unit of measure' different from 'unit of measure'. How to specifically maintain 'base unit of measure' in CRM
Your help is greatly appreciated and rewarded.
Regards,
JayHello Sebstian,
First check the B doc status in T CODE SMW01,where you select the error or aborted,and give your linked Bdoc with
business obj material in t code R3AC1.
Than in SMW01 goto environment check object link,here u will find the error of this object. If it needs, u have to run request for this object in R3AR2.
I hope it will help you
regards
naren.. -
Help with initial download....do I have right version?
My initial download/import to populate Photoshop Elements 13 stopped working (responding) at about 80%...If i re-download, will it duplicate the first 80%?
Also, when entering the forum it asked which product I had questions about...I would like to know the difference between Photoshop, Photoshop Lightroom & Photoshop Elements...
I was looking to purchase a fully functioning 'photo/picture' program for my new Toshiba (previously a Mac user) and know nothing! Did I get the right one? Is this a stand alone program? I have a MASSIVE photo endeavor and want to be set up in the best way before I begin organizing 50 years of pix!
Thank you!!!!
Meredith
Lafayette COMeredith wrote:
My initial download/import to populate Photoshop Elements 13 stopped working (responding) at about 80%...If i re-download, will it duplicate the first 80%?
Where did you download from? Was it installed or just downloaded? Did you purchase it or are you using the trial?
I would like to know the difference between Photoshop, Photoshop Lightroom & Photoshop Elements...
See here:
FAQ: Why is Photoshop Elements cheaper? What's different about Photoshop?
I was looking to purchase a fully functioning 'photo/picture' program for my new Toshiba (previously a Mac user) and know nothing! Did I get the right one? Is this a stand alone program? I have a MASSIVE photo endeavor and want to be set up in the best way before I begin organizing 50 years of pix!
Photoshop Elements will work for you. -
Mat. for Initial Download: Table not supported by function "C_"
Hi All,
We are in SRM 5.0 & ECC 6.0 with Classic scenario. While uploading the MATERIAL through R3AS, we have the "Mat. for Initial Download: Table not supported by function C_" & "No product ID determined for material number ... of logical system" error in SMW01.
In SMQ2 in SRM, Queue is blocked with "Error in Mapping (Details: transaction SMW01)"
For your information RFC Users at both the ends have SAP_ALL authorisation. SAP Notes 720819, 420980 & 432339 are implemented.
Please guide me to resolve this issue.
Regards
Ashutoshhi,
How was the issue resolved , i am having the same problem.
can somebody provide with clue
regards -
Hi Everybody
I am performing the initial download and defined the logical systems, client systems, set up the RFC USER, sites, subscriptions and the rest of the configuration settings and I am at a junction not knowing what to do next..
Could someone help with the steps from this juncture.
Cheers
JessyHi Buddy
I meant
C71: CRM Connectivity
B09: CRM Customizing Replication
C03: CRM Master and Transaction Data Replication
available on http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
Hope this will help
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b> -
Initial download taking time for CTParts in syclo inventory manager 3.2
Hi All,
While doing the Initial download in syclo inventory manager 3.2 we have observed that it is taking a lot of time for fetching the data from the complex table CTParts.
In agentry diagram CTParts complex table is showing nine fields, out of this nine fields few fields like UOM, BatchIndicator etc does not have any dependency.So can i delete those fields?
If yes, what will be the impact on application after deleting those fields .
Thanks for your help
-Garima
Tags edited by: Michael ApplebyGarima,
You need to analyze couple of things before making any program changes:-
a) Can you check if you have set filter for ctparts MDO object in SAP ? if MDO filter for plant points to user parameter "WRK' , look at value of WRK in SU3. Make sure that you have plant value maintained for WRK parameter.
b) if indeed WRK value is maintained then go to MARC and check the number of materials that exists for WRK plant. if it is too many then do you really all those materials downloaded to Mobile device ? check if you can maintain other filters values to restrict material records downloaded like material type , material group etc.
c) Check the point of bottlecheck a) whether it takes more time to execute query in SAP . b) whether it takes time to transfer data from SAP to Java layer. if so try to increase Java heap size.
d) Also look at MDO field selections for ctparts in SAP. Only select fields that you want to do.
e) Did you create additional indexes for ctparts complex table ?
f) Finally if nothing works then look at option of replacing output structure in BAPI which return CTparts with Z structure with only required 9 fields which also requires Z Java code changes for ctparts complex table.
Thanks
Manju. -
Mat. for Initial Download: Table not supported by function
Dear All,
While replicating material from R3AS, I am getting error in SMW01 as below:
"Mat. for Initial Download: Table not supported by function"
Kindly suggest.
Regards,
SagarHi,
if anybody is interested:I solved the problem for our systems, but it's not a very nice solution:
In backendsystem, which is ECC 6.0 for us, in table CRMRFCPAR the field CRM_REL was empty for connection to CRM. I think this field should be filled automatically but it wasn't. I filled it 'hard' with '700' and then product/material data could be replicated.
Background:
In ECC system while collecting material data the subroutine GET_DOWNLOAD_PARAMS_AND_QUEUE of FG CRM0 is called and there is a request 'IF gt_rfcdest-crm_rel GE '500'.'
This field crm_rel is filled from table CRMRFCPAR.
I think CRMRFCPAR-CRM_REL should be filled automatically when using SM30 using the RFC-Destination but in our system it was empty. (CRMPAROLTP -> CRM_RELEASE is set !). So I set CRMRFCPAR-CRM_REL 'hard' in SE11 to '700'.
This is not a very nice solution but maybe it will help anyone.
I'm also interested if anybody has another better solution.
Regards
Christoph -
In a new session of firefox, the initial download of a file is slow
In a new session of firefox, the first file downloaded on that session is slow to start. Almost like a pause before it bring up the where to save window. I have the "please ask me where to save" selected. Every subsequent download after the initial download, firefox brings up the where to save window quickly. Firefox 3.6.3.
== This happened ==
Every time Firefox openedThe dialog you are referring to is a ''shell dialog''.
The most likely reason for this to take a long time is that the default location is taking a long time to resolve, as can happen if it's a network location or if the default folder doesn't exist.
To reset the download location, reset '''browser.download.dir''' in the advanced configuration interface:
# Select Firefox's location bar (press CTRL+L or click it)
# Type '''about:config''' and press enter
# Click '''I'll be careful, I promise!'''
# in the Filter box, type '''browser.download.dir'''
# Right click the keyword.url preference below and choose '''Reset''' -
Stopped Initial download for Bupa_Main in CRM in between
Hi Experts,
We have a problem in CRM. The initial download for the object BUPA_MAIN was accidently started by one of collegues.
The job ran for almost 24 hour adn was still running. The queues went as high as to 40000 entries & the outbound queues started getting stuck in ISU system
So we had to finally kill the job & things resumes as normal...
Can anybody let me know as to what would be the impact of killing the job...Hi Rohit,
Thanks for the info.
Please let me know as to which table will i have to check to see if the download is successfully completed. ( for object BUPA_MAIN)
And did u mean unlocking the queues by quoting 'clearing ' the queue. We we did clear the blocked queue (r3ad* ) but the queue R3AI* got cleared automatically...
Also it seems that the R3AI* queue is still running even cancelling the job.
Also shows as a error in SWMP tcode indicating a abort of initial download. How do i get rid of it.
Maybe you are looking for
-
ICloud: how to make it a useful tool?
I upgraded to iOS5 on October 12, probably to hastily. Now, the software is probably still in evolution, but as it is now it seems to me that it does not offer a useful tool as one expected from the big promotion from Apple. The main points are, in m
-
trying to upgrade itunes from 10.4 to 10.6.3 while in itunes app and nothing happens when i click download. could anyone have a suggestion of a possible solution? Thx
-
I need help can some one help me.
-
How it will be related from ABAP to BW
Hi..Friends, I have 1 yr of experience in ABAP,But I m looking to migratre ABAP to BI. How it will be related from ABAP to BW can anybody give best advise to suit my carrer. Cheers Lohit.
-
Problems with opening video files?
In CS5 I would always save my in-progress .gifs as Quicktime Movies. Since upgrading, I have not been able to open any of these Quicktime files, and I also cannot open .mp4 files that I created in Photoshop CS6. Anyone have an idea as to why I'm havi