Initial files in /userhome/customFolder in KM

Hi,
I want to upload initial files for every user in portal under a folder in KM.
This folder it will be created with the userhome filter.
The files will be the same for every user, and later they could customize as they want.
It will be something like this:
/userhome
     /acces links
            file1
            file2
            file3
            file4
Is there a way to do this?
Thanks
Guillermo

Hi Giri,
Try to help you...
If you have ODI installed in your system you can import a KM from impexp directory of installed path...
Once you import it you can double click the KM and see the steps/scripts of them.
Does it makes sense?
Thanks,
Gurusank

Similar Messages

Dreamweaver CS3 hangs on "initializing files" in Windows Vista Home Premium

Hi,
Anybody else encountering this issue? I noticed this7 error
in Windows Vista Home Premium. When you launch Dreamweaver CS3, it
opens the splash screen, displays “initializing files”
and thats it.
Necessary Troubleshooting steps we’re already done to
attempt to launch/fix the program but to no avails.
seems the problem happens on acer computers with 4 gigs of
ram.
You can check it from this
Thread
Thanks! I hope someone from engineering can take a look at
this issue!

A little more on this topic with solution ...
http://sidapolinario.unicpinoy.com/2008/05/09/dreamweaver-cs3-some-emmerging-issues/
Regards.
Patrick.

What should I work with for an initial file size for final print pieces that range from 18"x12" to 40' x 20'.

I am shooting in Canon RAW and using background plates with green screen images. I am not certain whether I need to create the initial file in multiple sizes for the various final print pieces, or if a single file size should be used and then down-rezzed or uprezzed based on what needs to be printed.
File sizes are:
18" x 12" (inches)
40" x 27" (inches)
30" x 60" (inches)
60" x 120" (inches)/5' x 10' (feet)
20' x 40' (feet)
The largest size format we are doing as 1/10 scale at 720 dpi to go down to 72 dpi for print.
Any suggestions would be helpful. Much thanks.

Is it ok to delete the stuff from the Final Cut Express Documents since I don't need it anymore?
No problem.
Regards the external drive. Check that it is formatted to Mac OS Extended or you will strike trouble and connect it with a firewire cable, not USB.
Al

OSX 10.9.1 Dreamweaver CC startup stuck at initializing files

Hi there, I've had some trouble with Dreamweaver CC startup sticking at initializing files. I force quit and tried a couple of times but wasn't getting anywhere so I uninstalled and re-installed Dreamweaver. The program has successfully opened but still took some time at the point of 'initializing files'. Is there any way I can improve this situation?
Thanks

You've got a problem with a third-party plugin (Ai2CanvasMac). Try removing it from the Plugins folder and restart.

DW CS3 hangs at 'initializing files' on Mac

I've been evaluating DW/CS3 for Mac for a number of sites
that I run. Once during evaluation, I got into a state where DW
would not start but would instead hang at "initializing files" and
never actually start up. With a largely random of combination of
Tech Article and Web Folklore, I managed to get it started and
continued with the eval.
Ultimately, I decided that the only thing worse than DW was
every thing else, so I purchased it.
Today I went to start up DW again. Same problem - it just
won't start. Failure to launch is bad. Very bad. My copy is still
shrink-wrapped, and I have a little bit left on my 30 day eval so I
could return it if this is just a black hole. Is this something I
can look forward to every couple of days in DW (and if so, is there
a recipe for actually using the program) or should I look toward
getting out from under this program before I break the shrinkrwap
and getting a refund?
Is there some way to get to advanced features like (gasp) the
program starting? Is there some known trigger for this that can be
avoided?
Thanx,
RJL

quote:
Originally posted by:
sean69
I've had continuing problems with DWCS3[9] failing to
start... generally speaking there are 2 causes:
1. DWCS3[9] can't find it's files or site cache
- usually manifests if I delete site files outside DW from a
network drive..
- delete the site cache in question "C:\Documents and
Settings\_your_user_name\Application Data\Adobe\Dreamweaver
9\Configuration\SiteCache" and restart DW
- rename the configuration directory and restart DW
C:\Documents and Settings\_your_user_name\Application
Data\Adobe\Dreamweaver 9\Configuration\
-both those will force DW to rebuild the site cache or it's
configuration
2. DWCS3[9] "does something weird with internet"
- I dunno if this is the actual problem, but it seems that DW
"calls home" a fair bit, I noticed that my MSN was not loading
either [after a particularly large number of files were added to
bitorrent]
solution - shutdown bitorrent, or anything else that may be
maxing out your available tcpip connections.
-hope it helps
-sean
Thanks a lot no.1 did it for me.
It took some time but the dreamweaver never hanged(I had
10000+files)
Thanks a lot

DW CS4 crashes at startup - initializing files

I have been using DW CS4 for a while now without any issues.
However, as of last night whenever I start DW CS4 DW goes through
the startup procedure and then stops as soon as the screen says
"Initializing files". At that point, windows Vista takes over with
the crash message and the program stops loading.
I have unistalled and reinstalled DW several times as well as
deleting the preferences (which I dislike since my DW is highly
customized) No luck so far.
As a background, I should add that last week a client was
nice enough to help me buy the Adobe suite premium (the one with
almost all the goodies) at the partner price. So I installed it,
all of it minus Dreamweaver. DW worked fine with the suite for
several days so I don;t think that's what's going on, but I feel I
should disclose it.
My system is an Intel quad core with 8gb of Ram and Vista 64
bit.
Dreamweaver CS3 thankfully still works fine so I will be able
to use that for work until I figure this out. I hope someone can
help me out because this is a real big problem for me. Thank
you.

There is an an item in the Dreamweaver FAQ entitled Dreamweaver crashes on startup.
In all probability, you have a corrupt file cache. Details on how to delete it are in that article. In some cases, you need to delete the personal configuration folder, but try the file cache first.

Dreamweaver CS6/CC crashes while starting (initializing files), reinstalled,...

Hey there,
I own the Dreamweaver CC & CS6. CS6 worked. Then installed the CC App, deinstalled DW CS6 and installed DW CC. Dreamweaver CC crashes while "initializing files" (i dont even see the main menu). Now i deinstalled CC and installed the CS6 version which crashes too now!
Please help me! Thanks.

manually, reset your preferences.
use this info to reset your cc preferences, Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6

Stucks at Initializing Files

I just got the Adobe Master Collection CS3. Everything is
fine except for the Dreamweaver CS3.
Basically, it's able to open. But when it loads to
Initializing Files, it stop there, and can't get into the main
page. I face this problem with Dreamweaver 8.0 too. When it reaches
Initializing Files, it will automatically disappear.
Totally no error message for Dreamweaver CS3 and Dreamweaver
8.
I'm using it on Acer TravelMate 6292, Vista.

http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=674&threadid =1391324&enterthread=y
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"chiougal" <[email protected]> wrote in
message
news:gfm33m$kkc$[email protected]..
>I just got the Adobe Master Collection CS3. Everything is
fine except for
>the
> Dreamweaver CS3.
>
> Basically, it's able to open. But when it loads to
Initializing Files, it
> stop
> there, and can't get into the main page. I face this
problem with
> Dreamweaver
> 8.0 too. When it reaches Initializing Files, it will
automatically
> disappear.
>
> Totally no error message for Dreamweaver CS3 and
Dreamweaver 8.
>
> I'm using it on Acer TravelMate 6292, Vista.
>
>

Need to load only delta where I receive full initial file all the time

Hi All,
Can any one let me know is there any feature in DS where we can load only delta/updated/changed fileds from the flat file (which is full load)...
Scenario is : system will send all the time full initial load in a flat file format where DS need to load initially all the records later it has to update only the delta changes... So wondering do I need to perform full load in DS all the time or is there any feature to load initially full file and load only updates moving forward?
Thanks
Rajeev

If you are indeed getting a full dump of the entire target table from the source system, every time, you may find it faster to truncate-and-reload your target table, depending on what else (if anything) goes in there, the number and nature of transformations, etc. Running a really large set of records through a Table Comparison transform, comparing on all fields (which it sounds like you'd need to do), can take a while, and given that you've always got "all the records," may be beside the point.
You also may want to investigate the use of checksum fields. It's possible that adding (and, of course, calculating) checksum fields on each row in both the source and target and then comparing those to identify updates would be faster than doing a Table Comparison transform-based comparison of each field, for each record.
Best wishes,
Jeff Prenevost

Recovering a datafile with different initial file size

Sorry for this post. no need

OS? Database version? Noarchivelog or archivelog? At least in the latter case (archivelog) DDL commands like increasing a datafile are recorded,too.
Werner

[SOLVED} linux-dvb-apps initial scan files

Anyone know where to find the linux-dvb-apps initial scan files. They used to be under /usr/share/dvb/, but the latest linux-dvb-apps package just lists contents in /usr/share/dvb/av7110_loadkeys/
Failing that has anyone got a decent scan file for uk-CrystalPalace?
Seems I need to google harder as this has already come up
https://bbs.archlinux.org/viewtopic.php?id=175732
Last edited by replabrobin (2014-03-29 21:37:26)

R00KIE wrote:You could give w_scan from the aur a try.
I have tried w_scan, but I always seem to get too many base frequencies. When I run scan using the result as an initial file I get duplicate channels with different parameters eg QAM64 vs QSPK etc etc. Sometimes all of the duplicates open in VLC other times none. I guess I must be doing something wrong or maybe I am picking up more than one transmitter.

When I try to insert several pdf files into an initial one, they consistently are attached in reverse order, no matter how I instruct the program. How do I correct this?

I am working with Acrobat X Pro. I open a pdf, then try to insert several files, in a specific order, into the first one. No matter whether I instruct it to place the files after the first, last or name a page number, the files are inserted in reverse order after the initial file. How do I overcome this problem?

Thanks Bill !! for providing the simple answer - this has saved me much work. I always assumed that Acrobat would either a) sort the inserted files alphanumerically or b) use the sort order of the OS's file selector. The c) answer of inserting the files in the reverse order of the OS file selector (since Acrobat will reverse that order) eluded me until now.
It's clearly a bug in the program, I'm using Acrobat X Pro, but had the exact same problem with Acrobat 7 - never occurred to me to sort the file listing in reverse alphanumeric order in order to have Acrobat insert them in correct alphanumeric order.
Thank!

"Windows - No Disk" error message on file transfer

Hello!
I updated our ZDM7 server from plain old ZDM7 with no updates to ZDM7 SP1
IR1. Now, when initiating File Transfer operation with any workstation, up
comes this error message:
"Windows - No Disk"
"Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c"
[Cancel] [Try Again] [Continue]
If I click "Continue" 4 times, file transfer starts up successfully.
Any ideas about how to get rid of this annoying message?
Toomas Aas

Toomas,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Re importing files to AE problem

I followed the help instructions to re-import files to an AE project, but I had one problem. Certain files don't appear in my timeline, they are unviewable, and they have a different name and icon next to them. I'll provide a screen shot to show you what I mean.
Let me also explain the process of how I imported them. There's three things you should know first.
1. the files are in multiple folders, and those folders are within other folders.
2. The files I'm importing are .jpg files.
3. I'm using a mac with After Effects CC
So what I did first after it told me I was missing 210 files, was double click on the first missing file. It prompted me to choose the file in my finder, just like the help said. I double clicked the first file I wanted to replace. It then said that 48 files were recovered. I thought this was great, and repeated the same process for each of the other folders. Everything worked perfectly, except the initial files I clicked on had become some other file type. I tried to replace them but it didn't work. They no longer appeared in the timeline either. so I managed to replace the vast majority of my files, but about 4 of them don't work. I'm posting a screen shot to show you the icon that appears next to them after I recovered them. I have no idea what these icons mean and I can't work with those images. Any idea how to get my original image back in there?

That icon says that this is an image sequence---i.e., a set of images that are treated as one footage item (as a movie), not as independent still image footage items.

How do I keep a file on my external hard drive and delete it from my internal hard drive?

I have a iMac with 1 TB internal hard drive, connected to it is a 3 TB Seagate external hard drive using Time Machine to back up my computer.
I use this computer for making family movies with videos and pictures. My 1 TB internal hard drive is now almost full with only 200 GBs of storage left on it. My external drive has 1.62 TBs of space left on it. I would like to delete a lot of the videos on my internal hard drive and keep them only on the external hard drive. I've tried this and it tells me I cannot do it because it is part of the Time Machine back up. Why can't I manage my computer files as I would like??
Also once you import pictures into Aperture or videos into iMovie, good luck having access to the initial files you imported. It seems once these programs get hold of your files they aren't accessible to you any more. I don't understand that! Anyway can anyone help me get the files I want off my iMac and onto my external Seagate hard drive?
Thanks in advance!

CCLIANA wrote:
My sister is trying to rename a file on an external hard drive...
What is the File...?

Initial files in /userhome/customFolder in KM

Similar Messages

Maybe you are looking for