Initial load from CRM to CDB

Hi,
I'm trying to do the initial download from CRM to CDB for a mobile scenario, using the transaction R3AS.
In this transaction, I'm selecting the load object, Source site, but unable to select the destionation site as CDB. Is there any configuration needs to be done before we do the initial download?
And important point is that there is an entry for CDB in the table SMOHSITEID.
Please help me in this regard.
Regards,
Praveen

HI
Praveen you forgot the basic thing is you need to create a site in CDB also
the site you created previously for crm data base not for cdb as u also know cdb is connected to crm data base through middleware first you create site, subscription, publication in in cdm also later start down loading R3as before golive if your mobile clients are already live use R3AC4 delta again you have to set up filters and parallel processing for reduce the down loading time
Reward with Points if Helpful
Venkat

Similar Messages

Customizing not downloading from CRM to CDB

Dear All
Pl help/ guide on the direction to proceed further. Customizing (Domain Ranges DD Texts) are not downloading from CRM to CDB.
Background:
Activities and Campaigns are replicated from CRM to CDB (Mobile). For a particular new field which we have added through AET, the domain ranges are stored in the table DD07T. The task is do a customizing download to replicate these domain ranges to the corresponding CDB table SMODD07T. For this, We would need to create a BDoc type @ BDoc Modeler and then a customizing adapter object with that linked BDoc type. For distribution from CDB to mobile, we would have to create replication object and publication on this Linked BDoc in SMOEAC.
Issue
Now, when I am creating the Bdoc type in SBDM, it prompts that mapped table (SMODD07T) should have two key fields and only one Primary key for the segment and since this is not the case it is throwing the error. I have verified with various std customizing adapter objects and their corresponding sBDocs. In all the cases, the SMO table has exactly key fields, the MANDT client and the SFA GUID. Without generating the BDoc type, the adapter object Banega nahi and I experimented in many ways where I created a custom adapter object with any of the standard campaign and customizing related Linked BDoc types for the adapter object, Initial Load is successful and even huge blocks of data is transferred. But the required SMODD07T table is not getting populated.

Hi,
Ok the initial load is performed without errors.... But did you check the queues?
Best regards,
Caíque Escaler

Initial Load ISU / CRM Issues

Hi all
I have a few questions.
1. When you start an initial load for BUPA_MAIN in R3AS (from ISU to CRM) it seems only 1 DIAG WP is used (SM50). Is this normal?
2. In R3AM1 you can monitor the objects. Everything seems to be loaded but yet the status is still 'Running', is this because of BDoc validation errors?
Kind regards
Lucas

Hello Lucas,
There's a param(CRM_MAX_QUEUE_NUMBER_INITIAL) you can maintain in the table CRMPAROLTP of the source system(maintain this in the ERP system if you're doing an initial load from ERP to CRM)
Reference Notes:
350176
765236
The parval1 for Parameter CRM_MAX_QUEUE_NUMBER_INITIAL should be an integer(lets say 5) instead of a character 'X'. In such a case 5 queues would be formed for initial load.
Here's an example :
Parameter name CRM_MAX_QUEUE_NUMBER_INITIAL
Param. Name 2   <Object name>    " for example CUSTOMER_MAIN
Param. Name 3
User            <User>           " for example CRM, if CRM is connected
Param. Value    <no. of queues> " for example 5
Param. Value 2
So using the example above 5 R3AI_CUSTOMER_MAIN queues would be formed on the ERP and sent to CRM for processing.
The no. of available dialog work processes in SM51 available to the qRFC scheduler in CRM system should be able to handle the parallel processing of queues. So consult your basis administrators on this front.
Regards,
Rohit

Initial Load from ABAP Failed

Hi.
Initial load from ABAP described in following PDF document failed.
Identity Management for SAP System Landscapes: Configuration Guide
http://service.sap.com/~sapidb/011000358700001449662008E
System log Error
lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [C:\WINDOWS\system32\sapjcorfc.dll: Can't find dependent libraries]. java.library.path [C:\Program Files (x86)\Java\j2re1.4.2_16\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32;C:\WINDOWS;......
Environment is
IdM 7.1
NW AS JAVA 7.0 SP 17
Windows 2003 Server 64bit
SQL Server
Any help will be most appreciated !

Hi You Nakamura,
We are facing the same problem during AS ABAP - initial load with the same error message.
I downloaded the msvcp71.dll file and placed it in System32 folder. But the problem remains the same (even after server restart).
The system log shows the same error message and no entries in job log.
Please let me know if you had followed any different way to install the dll file.
Regards,
Vijay.K

Initial download from crm 5 to ecc 6

Initial Download of ECC 6 customer_main to CRM works well but mapping of bupa_main from CRM 5 to ECC 6 didn't work.
In R3AS I got an short dump:
GETWA_NOT_ASSIGNED_RANGE
So I tried CRMM_BUPA_MAP to send single customers and I got that error.
Partially send, receivers have errors:
I have checked all the fields in the ecc6 settings and crm5 also.
it is very urgent bec. iam at client side.

Hi Devi,
Ya now its clear. So basically you are dealing with the data exchange between the R/3 customer to CRM business partner.
As you mentioned that the CUSTOMRE_MAIN load is successful
and that means you have already done the account group to calssification mapping in R/3 transaction PIDE from R/3 to CRM. Pls check the same transaction for the data flow from CRM to R/3. Also check the number range assignment. For more detail check the best practice guide C03.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Download Sales Office from CRM to CDB

Hi all,
I am trying to download the replication object DNL_CUST_S_OFFI (sales office) from CRM to CBD. However, there is no such load object available when i try to run in R3AS. I got the error There is no object definition for object when load in R3AS. May i know what is the correct adapter object name for this replication object DNL_CUST_S_OFFI?
Thanks

Hi,
Make sure Sbdoc DNL_CUST_S_OFFI is active and generate services for it using SMOGGEN. Then the data will be written into CDB tables like SMOTVKBT/SMOTVKBZ(I'm not sure about the exact one)
Then do an extract of the object DNL_CUST_S_OFFI to download the data to the client.
Goto smoeac : filter the mobile sites : Click the requisite mobile site and Start an extract : Select Customizing Objects (double click)
Now you'll get a list of replication objects : Select the bulk Replication object DNL_CUST_S_OFFI and start extract.
Tnx.

Golden Gate Initial load from 3 tb schema

Hi
My source database is 9i rdbms on solaris 5.10. I would like to build 11gR2 database on oracel Enterprise linux .
How can i do the initial load of 3tb size schema , from my source to target ( which is cross platform and different version of rdbms)
Thanks

Couple of options.
Use old export/import to do the initial load. While that is taking place, turn on change capture on the source so any transactions that take place during exp/imp timeframe are captured in the trails. Once the init load is done, you start replicat with the trails that have accumulated since exp started. Once source and target are fully synchronized, do your cutover to the target system.
Do an in-place upgrade of your 9i source, to at least 10g. Reason: use transportable tablespaces (or, you can go with expdp/impdp). If you go the TTS route, you will also have to take into account endian/byte ordering of the datafiles (Solaris = big, Linux = little), and that will involve time to run RMAN convert. You can test this out ahead of time both ways. Plus, you can get to 10g on your source via TTS since you are on the same platform. When you do all of this for real, you'll also be starting change capture so trails can be applied to the target (not so much the case with TTS, but for sure with Data Pump).

Delta Load from CRM- picking up 0 records

Hi Gurus,
Iam trying to load CRM data into BW ODS using datasource 0crm_quotation_I. This load used to work fine about a month ago in Delta mode. But it started failing and so I ( my colleague deleted all the old requests) did an full repair and then an Init w/o data and when i schedule teh delta iam getting 0 records. Can anyone please throw light on this?/
Also is this could be an issue with Delta queue in CRM?/
Please reply..
DV
null

Hi Rajani,
Hi rajani with Init the process will take long. just for 50000 records it took 3 hrs and if we do init it will load all teh records from CRM and will take plenty of time. so we did a selective full load and used a program to convert them into full repair and thn did an int...
DV
null

Time-out in 0CRM_SRV_IBASE_ATTR initial load from CRM5.0

Hi All,
we are facing the following problem.
On our staging system an initial load of the 0CRM_SRV_IBASE_ATTR extraction times out in the source system. Strange thing is that this same extraction does work in our development system...
When i start the infopackage with the same parameters as in the dev system (in background, PSA and datatargets parralel, datas default data transfer settings) and check the source system, the job is running in background on dev, but as dialog on staging!!
Does anybody know how we can solve this issue?
Kind regards
Immanuel

Hi,
In which system ur chking in?
In BI system it occupies dialog only, but in R/3 system it shuld go in BKGD....
So chk in R/3 system, if still in R/3 it runs in dialog once chk the USERNAME on which the job in running whether he was permitted to run in BKGD...here i mean chk the permissions for tht user...
As said u can chk with BASIS....
rgds,
Edited by: Krishna Rao on May 13, 2009 2:11 PM

Initial load from ECC/R3 to MDM

Hi,
Could any one tell me the process for one time intial load from R3 to MDM.
preferably without XI.
how to extract data from R3 ?
what format?
how to map source to MDM repository?
Farah

Hi Farah,
There are two transactions to extract the data from R/3
MDMGX - For Extracting Lookup data
MDM_CLNT_EXTR - For Extracting Main table data
MDMGX Steps:
1.Go to transaction MDMGX.
2. Define Object Types: There are some standard object defined in MDMGX, you can use from them as per your requirement and you can also create the new objects.
3. Define Repositories and associate it with the object created in the previous step.Also add the FTP Server details.
4. Maintain Ports and Check tables: Add the Codes of the ports and select the corresponding table from where you want to extract the data.
5. Generate XSD: to generate the XSD file to use in console while creating port.
6. Start Extraction: To Extract the data from the R3 to MDM via FTP Server.
MDM_CLNT_EXTR steps:
Refer the below link that contains the entire configuration needed to extract the Main table data.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50260ae5-5589-2910-4791-fc091d9bf797]
Regards,
Jitesh Talreja

How transfer target group from CRM to CDB

Dear all,
i created a new target group.
I would it's transferred in CDB and I thought that the system would have done it automatically.
It appears that there is any kind of error (the target group is also in active status) but the situation is that the target group isn't in the CDB table and i don't find any adapter object or kind of report in CRM.
I'm working with CRM 4.0
Can someone help me?
Thanks in advanced!
Best regards,
Giuseppe

Hi,
target gruop should be transferred into CDB automatically
when it is assign to the marketing campaign or promotion and
MSA user has active subscription for Promotions & Campaigns.
regards, Robert

Download transport zone from crm to cdb (msa) ?

Hello,
I've customized new transportzone for country serbia.
Now I want to download this new transport zone into my mobile sales
client.
But which adapter object/download object do I need ?
Thanks Gerd

Hi,
the adapter object is DNL_CUST_CUST2.
The CRM table is TZONT, the CDB table is SMOTZONT.
Regards,
Wolfhard

Download custom fileds from CRM to CDB

Hi all,
I want to download a few EEWB fields of BP and Orders to CDB (Mobile Laptop) solution. Can you suggest me how to go abt it?
Regards
Arun

Hi,
enhancing objects with the EEWB also enhances the related CDB tables and the sBDocs.
Therefore the new fields should also be filled in the CDB after creating/changing data in CRM.
What you need to do to bring the new fields to MSA is the following:
- generate the changed table scripts on a particular MSA client using clientconsole tool
- generate the meta data (tps.net) on a particular MSA client using clientconsole tool
- run a full extract of the changed object
If there are already MSA clients in the field the create an upgrade package containing these changes (tables changes, BDoc changes) and apply/send this package to the Clients.
Regards,
Wolfhard

Bp down load from CRM to R/3

Hi Guys i got problem here in setting PIDE transaction for ship to . If add entry for Ship to and classification B sytem throws me msg as 'entry already exists'. Now do we really have to set for ship to as well or sold party calssification is enough for sending data to R/3 and can we use CUSTOMER MAIN for downloading data to R?3.
thanks
susheel

Hi Susheel,
Infact both shipto and soldto are require to transfer respective account groups to CRM roles.
If only soldto is transfered then in CRM all the four roles i.e. soldto, shipto, payer and billto are by default maintained.
But if shipto is transfered the only shipto is by default maintained.
You can very much use CUSTOMER_MAIN to download the data.
Check if anybody has not played with standard account group settings.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you!

How to distinguish Delta download from CRM to Mobile from Initial download

Hi guys,
I checked out that when downloading from CRM to CDB (for mobile), the inbound queue is always CRI_XXX..._CDBI.
For data load from CRM to R/3, I remember that initial load and delta load, the inbound queue names would end up in differnet words (I for initial load, D for Delta load). But for load from CRM to CDB, it seems that only 'I' exists.
My question is, how can we distinguish delta load from initial load via the queue name? saying that the queue name is
CRI_CSA_BUPA_INIT_CDBI, can we simply judge that it's an initial load or delta one?
Thanks and best regards,
Raymond

Yes, CRI_CSA_BUPA_INIT_CDBI is the queue created for BUPA initial load from CRM to CDB. Delta loads from CRM to CDB would create no queues - they would be handled in the objects queue itself (for eg. CSABUPA*) queues.
Regards,
Ankan

Initial load from CRM to CDB

Similar Messages

Maybe you are looking for