Initial Load of Business Partner not running

Dear SAP CRM gurus,
We have been able to perform initial download of Business Partners from ECC into our CRM system. We have done this many times. We do not know what is wrong, but since last week, we are unable to perform initial download of our Business Partners. When we run initial download using R3AS, there is no BDoc created, there is also no queues on inbound/outbound of both CRM and ECC system. There is also no error. R3AM1 showing initial download complete but only with 1 block. But there is no BDoc created!! All other replication objects are fine, except that BUPA_MAIN we are unable to perform initial download. Delta download is fine as well.
We have not changed anything on SMOEAC and it is all correct. Entries on CRMSUBTAB and CRMC_BUT_CALL_FU is also correct.
Please help!!

Hi,
When you are downloading CUSTOMER_MAIN through R3AS are u getting any warning or error??
or r u getting pop up with green light??
If u are getting any warning or error then go to tcode: smwp. Then go to runtime information
->Adapter Status Information>Initial Load Status
under that check running objects and check customer_main is there or not??
if found delete that entry and do initial load again.
Also check outbound queue of R/3 and inbound queue of CRM .
If then also its not working do request download using r3ar2, r3ar3 and r3ar4 and check whether it is working or not.
If helpful kindly reward me.
Thanks & Regards,
Anirban

Similar Messages

CUSTOMER_REL - Business partner not created; duplicate check on address

Hello Colleagues
I have a problem during CUSTOMER_REL replication from ERP to CRM.
In r3am1 object looks fine but in some BDoc following error appears:
Assignment person - address exists already
Message no. AM038
and the Business Partner for Contact Person is not created.
We are on:
SAP_ABA     701     0005     SAPKA70105     Cross-Application Component
SAP_BASIS     701     0005     SAPKB70105     SAP Basis Component
PI_BASIS     701     0005     SAPK-70105INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0001     SAPKITLRD1          SAP Solution Tools Plug-In
SAP_BS_FND701     0005     SAPK-70105INSAPBSFND     SAP Business Suite Foundation
SAP_BW     701     0005     SAPKW70105     SAP Business Warehouse
SAP_AP     700     0018     SAPKNA7018     SAP Application Platform
WEBCUIF     00     0005     SAPK-70005INWEBCUIF     SAP WEBCUIF 700
BBPCRM     700     0005     SAPKU70005     BBPCRM
BP-CRM70     700V1     0000               SAP Best Practices for CRM 7.0
BP-INSTASS     600V7     0000               SAP Best Practices Solution Builder
ST-A/PI     01L_CRM5700000               Application Servicetools for CRM 500 51
And have already applied
1394635
1396910
1397895
1410788
1438046
But it is seems problem lies on SAP_ABA as I have found note
1092089 - Business partner not created; duplicate check on address
which is valid for different BP role and
SAP_ABA 700
SAP_ABA 710 but not for our 701
Have you ever seen similar issue?
Thanks in advance
Michal

Hi Naresh,
Thanks for reply. Correction instructions from this note refer to METHOD MODIFY_CONP_ADDRES which doesn't exist in crm7.0.
I can see in CRM that contact person is replicated and is present in BUT000 but table BUT052 is empty for this contact.
What is more we have implemented in our CRM note 564538 To change Contact Persons grouping replicated from ECC to CRM.
But also have: Note 757955 - Incompatible change concerning CRMC_BUT_CALL_FU.
We checked as well
Note 609766 - Correction of BP GUIDS in CRMM_BUT_CUSTNO, BUT000, CRMKUNNR
Note 836353 and run reports to find inconsistencies in tables BUT052, BUT051, ADCP and ADRVP. However no inconsistencies were found.
Thanks in advance if you have any other idea.
Cheers,
Michal

Getting a "Business partner not found with partner function type requester"

Hi There,
After I add a text item to the shopping cart using the SHOP t-code, I get a message "Business partner not found with partner function type requester" What could be causing this and how can I rectify this problem.
Please help mas this is an urgent issue.
Thanks,
Grace

Hi Grace,
First check :
1- transaction : CRM_OM_BP_INTEGRATE
select org structure where your user is and check that you have green lights (no missing address....)
2- Run transaction USERS_GEN
Select check user
Is everything correct or does the user need to be repaired ?
Kind regards,
Yann

After closing the Firefox browser, a message appears "Severe error: Cannot load resource file; can not run". What could be wrong?

The message: "Severe Error; Can 't load resourse file; can not run" appears after closing Firefox4. All other applications on my pc do not have this problem.

I've found text of this error in npdjvu.dll plugin, remove it and error seems to disappear.

Business Partner Notes appearing as GUID

Hi All,
In MSA Business partner notes are appearing as GUID instead of text. As a fix we have done the extract on CAP-Gen Object which solves the problem temporarly.
If new notes are added to the Business partner then once again the problem occurs appearing as GUID instead of the note details.
This impact is there only on the few machines but major machines are working fine.
Can any one let us know the cause for why the GUID is appearing instead of note details.
Thanks,
Regards,
Vikram Donthy.

Hi,
which version/SP of MSA are you using?
Did you already apply the accordant hotfix(es) mentioned in the particular collection note?
Regards,
Wolfhard

PAYEXT - Business Partner not Populating

Hi,
We are generating PAYEXT IDoc's from F111.
The Idocs are not populating the Business Partner number in the segment.
Can some one tell me what the issue could be.
Thanks in advance,
Sneha Singh.

1. Goto MDS load cockpit transaction and run the sync for that one customer... Check the log to see why the BP is not created
2. Since you are saying the order was created without any issues, check the credit account on the sales order (header data or table VBAK) check if a BP is created for the credit account (in case credit acct is different to sold to)
3. If sold to = credit account, check if your sd-fscm Badi is implemented correctly. Among other things this Badi copies credit info such as risk class from fscm onto the sales order. Check if this Badi is implemented correctly (I'm assuming u've already activated fscm credit management)
4. Finally you may want to consider adding a line to OVA8 for blank risk category, for all credit control area and block the document for max doc value of -.01. This will prevent any sales orders from getting created when the proper credit info is not copied over from fscm (or if the credit data had not yet been maintained on the BP)
Cheers,
Krishna

Business partner not created when User is intergrated in SRM org Structure

Hi SRM gurus,
A new users in integrated into the SRM org structure thro Z tcode ,business partner is not created.
the user is not able to create shopping cart.
When we try to check for t.code:BBP_BP_OM_INTEGRATE we are getting this error"
Connection of object us XXXXXX to object u2018CPu2019 is not unique"
how to resolve this error.
Regards
G.Ganesh kumar

Hi all,
1) I have checked the SLG1 -No error log is found
2) In the basic tab there is no details to enter.
I am getting this error"Missing Authorisation : info type 1001 ,object type BP,Subtype A207".
since it is Production system -can we run run PFAL directly
G.Ganesh Kumar

Business partner not getting dunned though dunning procedure is attached

Hi All,
We have Business partner for which dunning procedure is attached , there is no dunning lock, i have checked the dunning procedure having levels.
is there link between dunning and payment method and Lock present in Incoming Payment tab in Business Partner master data?
I would like to know where i can check for business partner last dunned? i checked in CAA3 but could not find.
Thanks and Regards
Reena

Hi,
Incoming payment method option can be found at Contract Account level. There in the payments tab, you can find the Incoming payment method option.
Also, for getting the items for dunning, check directly at respective document level, if the incoming payment method is set. If there is no incoming payment method set, then it should allow the items for dunning.
Generally for incoming payment method, the payment is processed on the due date, so in most cases, you will see a lock applied for preventing the item to be considered before the due date. (Prevent Early Payment).
The payment method has the relation with the dunning. As the CA is registered for incoming payment method, it is expected that the payment would be received on a timely basis on or before the due dates, so these items are not considered for Dunning purpose.
FPM3 is the transaction that shows the dunning history for that account.
Manually run FPVA for dunning proposal if the items are elligible for dunning and check in FPM3 for the entry. It the print date for the entries found is blank, run FPVB for Dunning Activity.
Hope this clears your doubt.
Regards,
Rajesh Popat

Installation # is set to INITIAL in Create Business Partner Screen

All-
I am going to SOLUTION_MANAGER --> Create Business Partner to automatically generate business partners from my component systems. However in the Systems Tree, the installation number is set to INITIAL.
Any idea how to "refresh" this so to speak, so it has my actual Install #? I checked in component system --> System Status and it is reading fine there

Hi,
>
SolManiac wrote:
>Let me know what you mean by "refresh"
I mentioned as "Regenerate" not "refresh". Generate IBASE again from DSWP.
feel free to revert back.
--Ragu

E-Recruitment,Syncronization for Employee and Business Partner not working?

hi there,
i itend to create a business partner for employee in SAP E RECRUITMENT but when i run the report HRALXSYNC for an employee, the result i am getting is total blank. I suppose there should be some errors if it is not working properly, but the the screen after running the report is total blank.
are any prior settings must me meet before the business partners can be created using HRALXSYNC?
thanks you

HI Ravi
Requirements to use the report are the activation of the integration for buisness partner. You could get details from sap note 550055.
You have to switch on the following keys in table T77S0 with SM30:
Group    Sem. ID
HRALX   HRAC           to 'X' for global HR-Integration
HRALX   OBPON        to "ON" for activate the integration between organization object and business partner
HRALX   PBPON         "ON" for activation the integration between central perosn and business partner
Hope this helps.
Regards
Bernd

Business Partner not updating in Indian Company SAP8.81 PL 6

Hi All,
I am facing a problem while updating Business Partner with addresss in SAP 8.81 PL6. It is giving error code -5002 and enter valid number as error description but the same code is running successfully in other companys like UK,USA. Please suggest some solution and I dont want to use delete function because it will not solve my purpose.
Thanks
Surajit Kundu
Edited by: Surojit Kundu on Sep 22, 2011 8:29 AM

Hi Surajit Kundu，
Is the problem for all BP updating or only specific one?
Thanks,
Gordon

Business partner not created in SRM in HR-SRM integration

Hi All,
We are setting up SRM HR integration set up with ALE idocs message type.
I ve done configuration as per guide available in SAP.Setting up parnter profiles,maintaining message types in both the systems ,mainyaining entries in tavle T77S0 for HRALX , maintaining filters in distribution model in BD64. When I start replicating the data using PFAL in R/3 ,the idocs triggered are green in both R/3 and SRM for org units ,Postions and also Persons.
Still i dont see BP created for most of the employees.Only few are getting craeted.When I check the log in SLG1 it says Marital status could not be converted.
I maintained all entries as per the entries available in R/3 in SPRO-Cross application components- SAP Business Partner-Business partners-Natural Persons-Maintain Marital status . Still i rceive the same error in SLG1 and BP is not getting craeted with idoc in green in SRM.
CAn any one please help.
Thanks in advance,
Sheetal

Hi
On SRM side using WE05 transaction see the failed IDOC's to get the complete details of the error. As you are saying that some of the users are successfully replicated issue may be on the ECC side HR info type relation ship missing. Ask your HR team to check the same.
On ECC side check table HRP1001 to see the difference between the successully replcaited users and one which failed.
with regards
Manjunath

Business partner not created in FSCM

Hi,
I have a problem where in creating customer master data in FI creates a business partner in FSCM for all the payers except in the case when partner functions(sold-to, ship-to) on the sales area tab of the customer master record are populated. I do not know why this is the case - why would partner function fields on the customer master record break the automatic creation of business partner in FSCM?
Helpful answers would be rewarded.

Hi
We dont have any problem by entering the Industry field in the customer master for the creation of the business parter for FSCM. May be you need to check what are the parameters that will be passed on for creating a business partner from the customer master.
Thanks
Ashok

Business Partner not the same

Hi,
I created business partner for the corresponding employee in HR,but both the numbers are not the same
I used the program "HR_SYNC_PERSON" to generate the business partner number.
Thanks
Manish

hi Manish,
to achieve this u have do required settings in HR integration tab in SPRO..
Pramod

Business Partner not created

I'm sending a message from XI to CRM using the proxy "ABABusinessPartnerIn".
There are no error messages . However the Business Partner is not created.
How do I troubleshoot this issue ?

Manoj,
In CRM execute SPROXY, and select your interface. Under menu item PROXY->Test Interface, you'll be able to execute the proxy interface in debug mode. You'll need to download your message payload to test with. Also, there's a how-to guide "How to debug XI applications" available on the SDN at this link https://www.sdn.sap.com/irj/sdn/howtoguides?rid=/webcontent/uuid/dd0326a7-0d01-0010-f690-b94802b06c8a. [original link is broken]
Leo

Initial Load of Business Partner not running

Similar Messages

Maybe you are looking for