Initial Load of contract from ISU to CRM

Hi All,
We are working on the replication of contract from ISU to CRM.
We have done all the necessary setting,like assigning default product,running ecrm_generate_everh report etc
When we are running initial load on SI_CONTRACT,only single BDOC is getting generated which is error free but still it contains no data.
Since its without an error ,we are not able to figure out whats the error is.
Regards
Nikhil

Hello Nikhill,
Could you resolve the problem?? I've a similar error, the BDoc is empty. The table everh is filed but the fields contractpos and contarcthead have value '0000000000000000' i think that is the problem. ANd the recport ECRM_CHECK_EVERH say that are misiing contracts.
Could you help me please!!!
Thnks!!

Similar Messages

Error in Initial Load of Products from ECC to CRM

Hi ,
Im getting below errors In initial load of MATERIAL from ECC to CRM.
Data cannot be maintained for set type COMM_PR_MAT
Data cannot be maintained for set type COMM_PR_UNIT
Data cannot be maintained for set type COMM_PR_SHTEXT
My Analysis is
I found these set types are already assigned in other base category and around 100+ materials are created using this base category.
After initial load of DNL_CUST_PROD1, i found these set types are not assigned to any of the categories of hierarchy R3PRODSTYP. Since R3PRODSTYP is not having above set types, my initial load is failing.
Required Solution
Is there any other way, I can download materials from ECC to CRM, with out deleting the existing materials and Z hierarchy created earlier from CRM.
Regards,
Prasad
Message was edited by:
SAP CRM

Hi there,
Try to attach the Set Types:
"COMM_PR_MAT", "COMM_PR_UNIT", "COMM_PR_SHTEXT", COMM_PR_BATCH, COMM_PR_LGTEXT, COMM_PR_LGTEXT1,COMM_PR_LGTEXT2,
to the Category "MAT_" and then run the Initial load again.
It should work now unless you have some other issues.
Best regards,
Pankaj S.

Contract replication from ISU to CRM

Hi Experts
I have sucessfully replicated BP master data between ISU and CRM, Contract Account replication is done as well, i would like to replicate Contract from ISU to CRM. Any help will be highly appreciated.

Hello,
Please see note 632749 for help with this issue.
Please also check the foloowing points:
1. Are there any contract account entries existing in the table 'TFK_BUAG_REF' (IS-U System).
2. Check the contract account entries in your IS-U system with the transaction 'CAA3'. Are they existing ?
3. The buag class entry in table 'TFK_BUAG_REF' (IS-U System) is corresponding to the buag class entry in your business agreement (CRM system).
I hope this is helpful.
Regards
Olivia
Edited by: Olivia Walsh on Jan 24, 2011 5:40 PM

Update CRM contract from isu contract

Hi!!!
I'm try to update the data of crm contract from sap isu contract, but isn't works fine, the status and the description of CRM contract is not updated. The Bdoc SI_CONTRACT is generated correctly, and the Badi's DOWNLOAD on ISU and CRM are enhanced, but the info is not updated in crm when initial load is launched or when a move-out it's do it in isu.
Can you help me please?
Regards,
David

Hi David,
Even though you have a green Bdoc it doesnt mean that the information was updated correctly in CRM, it simply means that the Bdoc passed the information to the queue. Check if there are any sysfails in the queues - you get the queue name from the Bdoc - and also if there are any dumps that might be related. Have you ever been able to load data from ISU to CRM?
Kind regards,
Vanessa.

Migration from ISU to CRM

Hi,
We are populating SAP ISU via Emigall and proposing to replicate all customer data including BP, CA and Contract and all technical master data including CO, Premise and Device. This is a lot of objects and data to replicate from ISU to CRM which will mean our migration takes a long time.
Are there any other options to populating data into CRM? Would you advice LSMW load into CRM and Emigall load into ISU?
KR,
Michelle

Hi we are proposing to use Emigall (Data migration workbench) to load the following into ISU:-
BP
CA
Contract
CO
Premise
Device
Reg Structure
Documents
Dunning etc
We are proposing to use CRM middleware to replicate the following objects from ISU to CRM:-
BP
CA
Contract
CO
Premise
Device
My concern is that the replication from ISU to CRM is very slow and will be our bottleneck during migration weekend. I am looking for ways to speed up this replication including alternative ways of populating CRM.
KR,
Michelle

From ISU to CRM

hi frnds
My requirement is below
I have created a BOR object in ISU which is related to CRM order item
and in which the import parameters are date and status
now when i enter them and execute object then according there should be reflected in CRM program crm_order_read but i dont know why these are not reflected
i have also checked the FM it is retueming the correct values to CRM
Can anybody has reason why these are not reflected.

Hi we are proposing to use Emigall (Data migration workbench) to load the following into ISU:-
BP
CA
Contract
CO
Premise
Device
Reg Structure
Documents
Dunning etc
We are proposing to use CRM middleware to replicate the following objects from ISU to CRM:-
BP
CA
Contract
CO
Premise
Device
My concern is that the replication from ISU to CRM is very slow and will be our bottleneck during migration weekend. I am looking for ways to speed up this replication including alternative ways of populating CRM.
KR,
Michelle

Classification View in BP is not replicating to from ISU to CRM

Hi All,
I am very new to SAP CRM Middleware. We are upgrading to CRM 7 in out project.
When we run a request load to replicate BP (Busines Partner) from IS-U to CRM, It successfully replicates all the data from ISU to CRM.
But only the Classification Data is not getting replicated to CRM. Please see screen shot sbelow:
ISU Screen shot: XD03--> Additional Data
In CRM after Replication:
Attribute 4 is not copied. Can anybody suggest me any solution to this problem?
Thanks in advance,
Suman

Hi Ramana,
You need to set up CRM middleware for Initial and delta load of Business Partners from R3 to CRM.
This link may help you ->
http://help.sap.com/saphelp_crm40/helpdata/en/1c/924555855849ba896b0af806cd343c/frameset.htm
Cheers,
Ashish

Connection object repliction from isu to crm

Dear Experts,
I want to replicate the connection object from ISU to CRM could you tell me what are the configuration steps to be maintain in the CRM sytem so that the connection objects replicates to CRM.
Thanks & Regards
Boyz.
Moderator note: thread locked - no research done, available in other threads.

Hello,
Please see note 632749 for help with this issue.
Please also check the foloowing points:
1. Are there any contract account entries existing in the table 'TFK_BUAG_REF' (IS-U System).
2. Check the contract account entries in your IS-U system with the transaction 'CAA3'. Are they existing ?
3. The buag class entry in table 'TFK_BUAG_REF' (IS-U System) is corresponding to the buag class entry in your business agreement (CRM system).
I hope this is helpful.
Regards
Olivia
Edited by: Olivia Walsh on Jan 24, 2011 5:40 PM

Initial Load of Cubes from BW 3.1 to BW 3.5 system

Hello,
I am looking for some help with regards to the following challenge. We have an existing BW 3.1 (about 3 TB in size) with a cube defined which covers about half the size of the total amount of data (approx 1.5TB). We need to do an inital load of the cube data onto a new BW 3.5 system (which is in a different Data Center) and than establish regular deltas between the 2 systems. My question is what is the best way to move that initial amount of data from BW 3.1 to the new BW 3.5 system? Do we have to send every record over a wire or can we export the cube to tape (which will take a long time and is not easily repeatable), than import it in BW 3.5 and re-establish the connection between the 2 systems to allow deltas to flow. Any advice or explanation is highly appreciated
Thanks
Hans deVries

Hi Hans,
isn't it possible for you to do full loads for some time slices from your source cube? So you would be able to load the history up to a specific date via full loads and if you are up to date initialize your delta.
Siggi

Need to help in initial data loading from ISU into CRM

One our client has requirement as
All ISU data applicable (BP, BA, the appropriate technical data, Contracts, Products, Product Configuration and their correspoinding price Keys and Price Amount) to CRM should be loaded into CRM as the part of the intial load.
Eventhough ECRM_GENERATE_EVERH in ISU but its documentation is not available.
Is any provision like Report or RFC or function module present in SAP.
I would appreciate for you all quick reply with positive and appropriate solution. mailto [email protected]

Got my answer.We can clear the data using MDX.

Abort Status in Monitoring Initial Load Object - SERNR_CONFIG From R/3

Hi Experts,
Currently we are replicating Equipement from R/3 to CRM. Now we want to replicate only Serial Number withoutEquipment View. For this I Activated the Object Sernr_config and started for Initial download. When i monitored the replication it is showing the status as "ABORT".
As we are already replicating Equipment from R/3 to CRM, when we want to replicate only serial numbers how will they appear in CRM?
When we repllicate Equipment , it will create a Component & IBase ID for it. What will be created if we replicate only Serial Number?
I am currently workin on SAP CRM 6.O version.
Can u please guide me how to replicate.
best regards,
Sarangamath

Hi Srangamath,
Nomrally status Abort should ony occur if the load was maually cancelled.
However, the sytmoms you descibre have occurred in th past with equipment downloads.
If you're using fliters, notes 1230307 and 1224016 may help.
Otherwise, please check the precondition for "Replication of Equipment Between
SAP CRM and SAP ECC" in the attached Link:
[http://help.sap.com/saphelp_crm700_ehp01/helpdata/EN/46/cc79505ec61525e10000000a114a6b/frameset.htm]
Best regards,
Brian.

Initial load of contracts not using R/3 as backend

Hello!
We are going to load contracts into SRM 5.00.
We are not using R/3 as a backend, but will be recieveing the contract information on a file.
I am looking at using BBP_PD_CTR_CREATE/UPDATE and write my own program, but wanted to check with you experts if you knew of any other way? Not beeing used to GUID's etc this is not uncomplicated.
(Looked at the upload funciton, but seems like must be changes and not creates, correct?)
Any hints appreciated! Thanks!
Nam

Hello Jagadish,
thankyou for your reply.
We are not using R/3 as a backend (or any other SAP system) so this program would have to be heavily changed. Also we have a lot of custom fields etc in the contract, and would prob be easier to use the function omdules create/update then the program.
Am I perhaps wrong on assuming this??
Thanks
Nam

Replication of Business Partner from ISU to CRM

Hello,
I am creating the Business partner through 'BP' transaction and it is getting replicating to CRM,
But when I am creating the Buiness Partner through 'Emigall' transaction it is not replicating to CRM.
Also I added the many fields like u2018TIME_ZONE, ADDR_DATE_TO, ADDR_DATE_FROM, TEL_CNTRY, FAX_CNTRY etc.u2019 in the structure of business partner in 'Emigallu2019 transaction,
and the business partners were created successfully in ISU, but it is still *not replicating in CRM*.
Please help me to solve this issue.
Regards,
Darshana

Hi Darshana,
1st step: Check SAP delivery: IS Migration -> Settings -> SAP Settings
CRM_REPL_OFF X X Deactivate CRM Replication (only IS-U)
2nd step: Check project settings (superseding standard setting): IS Migration -> Settings -> Customizing Settings
- if you can't find the parameter CRM_REPL_OFF: standard setting is valid
- if there is a parameter CRM_REPL_OFF: check whether what the parameter value is (space or X)
Kind regards,
Fritz

How to load prices from ERP to CRM

Dear All,
I'm trying to download product prices, customer specific prices and customer specific discounts from ERP 6.0 EHP5 system to CRM 7.0 EHP1. RFC connection works, I'm transferring customers to ERP by middleware. Also I've done initial load of materials from ERP to CRM. Problem is with prices. I did initial loads of: DNL_CUST_PRICE without errors, but prices are still not available in CRM WebUI. What is the next step?
Could you provide any instruction or SAP note?
thanks in advance,
regards

Hello,
Before talking further about Web UI, first check whether condition records exist in CRM tables.
Also, check in table COMM_PRODUCT and BUT000 that whether Product and BP exist.
If yes, then if you are telling that there are 3 entries in CRM table for the same BP and Product,
then check mapping table CND_MAPM_CNV_REC for SOURCE_ID fields. Make sure, you have the correct
LOGSYS in this table for KNUMH-VARNUMH mapping.
If there are more than one SOURCE_ID present in this table, then chances of duplication is possible in condition tables.
You can also refer logs using txn CND_MAP_LOG_DISPLAY
Object: COND_EXCHANGE
Sub-object : CONDITIONS
And give 'from' 'to' correctly, to get the correct logs.
Hope this helps!
Best Regards,
Shanthala Kudva.

Delta load of customer from R/3 (ECC5.0) to CRM5.0

We have done an initial load of customers from ECC to CRM (R3AS). A change is done on a customer in ECC. I expect the changes to be reflected in CRM as a delta load. I do not see the changes. What am I missing?
All responses are appreciated and will be rewarded.

Hi Mani,
Here are some clues on how to proceed with processing of incomplete or failed BP deltas:
First of all you have to note that during the initial download, no delta download can occur. In particular, no delta download of customers occurs if the initial download of materials occurs at the same time. This is because the material download depends on the customer download.
During the delta download, the CRM system uses the inbound queues R3AD_CUSTOME<nnnnnnnnnn> where <nnnnnnnnnn> corresponds to the customer number in the R/3 system. If an error occurs during the download, the inbound queue for this customer is stopped. You can see the error messages in the flow trace. For the delta download, you have the option to use Transaction CRMM_BUPA_MAP for the error analysis. If you enter the customer and press Enter here, you can display the business partner number for a customer and all open BDocs (that is, those which contain errors or are being processed). To do this, you only have to click the 'Queues and BDocs during download' pushbutton. The system issues an overview of the queue and the open BDocs for this customer and in particular, you can 'look into' the BDoc. As a result, you return to the flow trace and you can display the error messages which occured as described above. During the delta download, you have the option to send the same BDoc again. This is useful if you can simply solve the problem by correcting Customizing in the CRM system. To do this, you simply click the corresponding icon in the flow trace (currently, this is the second icon from the left).
If you have to correct the error in the R/3 system, you have to delete the existing BDoc since it cannot be processed further. As a result, the inbound queue in the CRM system is released again. In this case, you are recommended to delete all existing open BDocs and to make the changes in the R/3 system.
If inconsistencies occur between the R/3 system and the CRM system, you can start a request for the customer. To do this, click the 'Get customer from the R/3 system' pushbutton. This starts a request which uses the inbound queue R3AR_CUSTOMER. Process possible errors as during an initial download.
If you still have problems and don't know how to fix, please post more specific information from the BDoc queue, such as what error message you are getting. It helps us better identify the problem.
Regards,
Rahul
PS. Please award points if it helps!
PPS. For future reference: this info was found in note 362621: Error drng data exchange customer<->business partner

Initial Load of contract from ISU to CRM

Similar Messages

Maybe you are looking for