Initial Load of Customers as Persons?

Hello,
does anyone know, whether it is possible to download some customers from R/3 to CRM as persons instead of organizations.
The background is, that we have debtors who are persons, not organizations.
As R/3 does not differ between Org's and Persons, but CRM does, I suppose there must be a solution for this common situation.
Thanks in advance for your help. Points will be rewarded.
Regards
Birgit Selle

Hello Naveen,
thanks for that information but unfortunately I don't know in which context I have to call that BAPI. Is there a user exit?
Perhaps I did not post my question precisely enough. So I try to ask again.
In the pide I can assign a classification (1 of 5 possibilities) to the relevant account group. I can choose between: A: Consumer Organization, B: Customer, C: Sales Prospect, D: Competitors and E: Consumer Person. So I choose classification B: Customer. But that means that the customers will automatically be created as organizations in CRM. But I would expect the system to offer me the possibility to choose between Person and Organization as it happens with classification A and E for consumers.
Thanks
Birgit

Similar Messages

Initial Load of customers stopped

Hello,
I started download of customer_main in CRM 4.0 and as a sales group couldn´t be found (which is also deleted in R3, but still to find in customer masters; also R3 gives an error if you go into VD02 because of this) an BDOC was generated, what is quite ok.
BUT - the problem is that the initial load was stopped completely.
In Rel. 3.0 we got also BDoc for errors BUT the download always finished. So afterwards errors were cleaned up.
Has somebody an idea whether this is normal behaviour in Rel.4.0 or what I can maybe do that download runs further after stop?
I´d be happy if I´d get some hints.
Kind regards
Christina

Hello,
it´s difficult to filter out customers as I don´t know upfront which one run into error, as I don´t know which sales group, offices have been deleted in R3 and are still existing in customer master.
We found note 823594 and it seems that with this the check of sales group+offices is simply ignored, what means the initial load will run through smoothly.
Problem can be that you get no BDOC anymore if a saes group is missing and then inconsistency of systems increase.
The error message was
"CRM_BUPA_MAPPING_30110 - No CRM sales office can be determined fr R3 sales group THS".
So the error shows what to do basically. But why the whole download is stopping is not clear.
If someboy knows about please reply on this.
Kind regards
Christina

No initial load of Customers, Material and delta load of Sales Orders.

Hi Experts,
I am facing a very troublesome issue. I am not able to setup the Middleware portion for initial and delta loads. I read a lot of documents and corrected a lot of things. finally, the connectivity is done with R/3 and CRM. Initial load of all objects is successful (as per Best PRactices guide). Customizing load is successful.
But after now I have these open issues for which I am unable to find any answers (am really exhausted!!):
- Customer_main load, it was succesful, but no BP's of R/3 are available.
- Material, it failed in SMW01, SMQ2, the errors are:
Mat. for Initial Download: Function table not supported
EAN xxxxxxxxxxxxxxxxxx does not correspond to the GTIN format and cannot be transferred
EAN yyyyyyyyyyyyyyyyyy does not correspond to the GTIN format and cannot be transferred
Plant xx is not assigned to a business partner
- Sales order, it shows green bdoc, but error segments says "No upload to R/3" and the order does not flow to R/3.
We had our system setup 3 years back for data transfer and Middleware. But few things changed and connectivity stopped. I did all that again now, but am not yet successful. Any inputs will be greatly appreciated.
Thanks,
-Pat

Hi Ashvin,
The error messages in SMW01 for MAterial initial load is :
     Mat. for Initial Download: Function table not supported
     EAN 123456789000562 does not correspond to the GTIN format and cannot be transferred
     EAN 900033056531434 does not correspond to the GTIN format and cannot be transferred
     Plant 21 is not assigned to a business partner
I have done the DNL_PLANT load successfully. Why then the plant error?
Some of the messages for BP:
Messages for business partner 1331:
No classification is assigned to business partner 1331
For another,
     Partner 00001872(469206A60E5F61C6E10000009F70045E): the following errors occurred
     City Atlanta does not exist in country US
     Time zone EST_NA does not exist
     You are not allowed to enter a tax jurisdiction code for country US
     Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Now, the time zone EST is assigned by default in R/3. Where do I change that? I do not want to change time zones as this may have other impacts. Maybe CRM I cna change this, not for sure in R/3. City check has been deactivated in R/3 and CRM, still the error.
Till these 2 are not solved, I cannot go into the Sales order loads.
Any ideas will be greatly appreciated.
Thanks,
-Pat

Replicating data once again to CRM after initial load fails for few records

My question (to put it simply):
We performed an initial load for customers and some records error out in CRM due to invalid data in R/3. How do we get the data into CRM after fixing the errors in R/3?
Detailed information:
This is a follow up question to the one posted here.
Can we turn off email validation during BP replication ?
We are doing an initial load of customers from R/3 to CRM, and those customers with invalid email address in R/3 error out and show up in SMW01 as having an invalid email address.
If we decide to fix the email address errors on R/3, these customers should then be replicated to CRM automatically, right? (since the deltas for customers are already active) The delta replication takes place, but, then we get this error message "Business Partner with GUID 'XXXX...' does not exist".
We ran the program ZREPAIR_CRMKUNNR provided by SAP to clear out any inconsistent data in the intermediate tables CRMKUNNR and CRM_BUT_CUSTNO, and then tried the delta load again. It still didn't seem to go through.
Any ideas how to resolve this issue?
Thanks in advance.
Max

Subramaniyan/Frederic,
We already performed an initial load of customers from R/3 to CRM. We had 30,330 records in R/3 and 30,300 of them have come over to CRM in the initial load. The remaining 30 show BDOC errors due to invalid email address.
I checked the delta load (R3AC4) and it is active for customers. Any changes I make for customers already in CRM come through successfully. When I make changes to customers with an invalid email address, the delta gets triggered and data come through to CRM, and I get the BDOC error "BP with GUID XXX... does not exist"
When I do a request load for that specific customer, it stays in "Wait" state forever in "Monitor Requests"
No, the DIMA did not help Frederic. I did follow the same steps you had mentioned in the other thread, but it just doesn't seem to run. I am going to open an OSS message with SAP for it. I'll update the other thread.
Thanks,
Max

Relationship Between ECC Customers (Contact Persons) and CRM BP

Hello,
I am new to middleware and need some help with the relationship between ECC customers/contact persons and CRM business partners.
We are transferring via bdoc this information from ECC to CRM.
Which bdoc types are used when transferring customers/contact persons? I believe it is BUPA_MAIN but am not too sure. How is the relationship between customer its contact person transferred? Is this done through BUPA_REL? I looked at the segment fields in SBDM but am not too sure how to understand the relationship...
Thanks for the help!
Regards,
Tiffanie

Thanks! With the initial load, how do I check what fields are being passed in the bdocs?
I tried to look for customer_main, customer_rel in SBDM and couldn't find it. Instead I used BUPA_MAIN and found some segments but couldn't find all the data that was being transferred (e.g. customer name, address, etc...) Where do I find all the fields contained in the bdoc?
I see them in SMW01 when I view the bdoc contents but can not find the actual structure (data fields) that are being brought in from ECC.
Thanks!
Tiffanie

Initial Load of IS-U business partners to CRM - wrong business partner cat

Hi Gurus,
when donwloading CUSTOMER_MAIN from R/3 to CRM
Where is determined that the business partner in CRM should be created in the business partner category 'Person'?
We have the problem that all our business partners in CRM are now 'Organizations' (but were sold-to-parties in R/3 with account group DEBI)
PIDE - setting is:
R/3 account group DEBI ---> classisifaction 'B' ('Customer')
In the customizing of the business partner roles for the role type CRM000 (and for all the others) Organization, Person and Group is all allowed by default.
The download itself and the number ranges work fine.

The reason for the problem is unknown but a workaround is to first initial load BUPA_MAIN instead of CUSTOMER_MAIN, then the right business partner category is taken by the system

Message no. R1286 when starting initial load again

When I start the initial load again ( Customer_main from ECC to CRM ) , after changing the ppoma structure to make sure all data is there, for all customers that already have been replicated in the past I get the Message R1286 :
Business partner XXXXXX already exists. (CRM 7)
While this statement is ofc correct, the customer does already exist, in the past the customer was updated, and the bdoc processing status green. We have upgraded from SP4 to SP8, and now the error message is shown and the bdoc is not processed.
Has something changed ?
How do I update all my customers to reflect changes in filters / PPOMA or just update them to fix small replication problems.
I have the same message when I start a request instead of an initial load.
Thx !!
Edited by: Olivier Priem on Nov 25, 2011 1:54 PM

Any help is welcome ...

Agentry Sales Manager Initial Load problem

Hello,
We've implemented the Agentry Sales Manager solution, everything work well in the development and test environments, but in production we have performance issues for specific users:
We have a user with:
5900 Accounts
21900 Contact Persons
Which are very large numbers, but the person responsible for our OSS question says this is feasible in the agentry environment.
The problem occurs when we perform the initial load/transmit for this user, the Accounts are processed like it should, but during the process of the contact persons something goes wrong:
I see that the function module /SYCLO/CRMMD_DOMYCONTACT_GET is being started and completely processed (Initially we had a dump with a timeout, but this has been solved).
Then the Agentry server is processing the results of that function module:
In the log I notice these lines:
getDocumentLinks::begin
getDocumentLinks::getDocumentLinks
Afterwards the server processes the results via the steplets, after which the data is being processed on the device (iPad). Then the employeeFetch should be triggered.
In our test with a user with lesser data this happens, but in this case we notice the following:
2015/04/16 15:46:48.852:           + BackEnd=Java-1
2015/04/16 15:46:48.852:             + BackEnd=Java-1
2015/04/16 15:46:48.852:               com.syclo.sap.FetchSession::endFetchRemoval::::begin
2015/04/16 15:46:48.852:             + BackEnd=Java-1
2015/04/16 15:46:48.852:               com.syclo.sap.FetchSession::endFetchRemoval::::--------------------------------
2015/04/16 15:46:48.852:           + BackEnd=Java-1
2015/04/16 15:46:48.852:             + BackEnd=Java-1
2015/04/16 15:46:48.852:               com.syclo.sap.FetchSession::beginFetchObjectRead::::begin
2015/04/16 15:46:48.852:             + BackEnd=Java-1
2015/04/16 15:46:48.852:               com.syclo.sap.FetchSession::beginFetchObjectRead::::--------------------------------
2015/04/16 15:46:48.852:           + BackEnd=Java-1
2015/04/16 15:46:48.852:             + BackEnd=Java-1
2015/04/16 15:46:48.852:               com.syclo.sap.FetchSession::endFetchObjectRead::::begin
2015/04/16 15:46:48.852:             + BackEnd=Java-1
2015/04/16 15:46:48.852:               com.syclo.sap.FetchSession::endFetchObjectRead::::--------------------------------
2015/04/16 15:49:21.108: + Thread=4172
2015/04/16 15:49:21.108:   + Server=Agentry
2015/04/16 15:49:21.108:     + BackEnd=Java-1
2015/04/16 15:49:21.108:       Java Back End: current jvm memory usage is 1682243584 bytes
2015/04/16 15:49:38.096:   + Server=Agentry
2015/04/16 15:49:38.096:     + BackEnd=Java-1
2015/04/16 15:49:38.096:       Java Back End: current jvm memory usage is 1682309120 bytes
2015/04/16 15:49:55.100:   + Server=Agentry
2015/04/16 15:49:55.100:     + BackEnd=Java-1
2015/04/16 15:49:55.100:       Java Back End: current jvm memory usage is 1682374656 bytes
After the last line nothing else happens.
In the Agentry GUI I see also that the Connection has disappeared without an error/exception what so ever...
Anybody has an idea what might cause this issue?
We've set the timeout and keepalive parameters to 36000 seconds (10 hours) in the agentry ini, so I think that it isn't a time out.
Thanks in advance!
Kind regards,
Robin

Hi Jason,
Thanks for your answer, it is a standalone Agentry server (without SMP). It looks to me also that the amount of data being fetched is too big. But the customer wants to get it on the device as the person on OSS said it should be possible.
When I look in the AgentryGUI on the server during the fetch I notice the following (see screenshot below):
The fetch is still busy but the connection is gone. At the point of the screenshot we see the Fetch is taking more then 3 hours (9:27 AM to 12:51 PM), but the connection for that user has been gone in the AgentryGUI from around 11:00 AM.
Even stranger is that nowhere an exception is thrown. The process on the server continues until the complete data set is processed in the steplets (seen in the log). Then the server is trying to allocate more jvm heap space. But at some point process just stops. In stead of continuing with the process.
The data is also not sent to the device at that point, so the problem is somewhere on the agentry server it seems.
The server's memory is 8GB and i'v set the maxheapspace variable in the agentry.ini as following:
maxHeapSize=2048
In the log I see that the server that cap doesn't reach.
We run on an iPad, only iOS devices were in scope.
Any idea's on where we might change something else?
Kind regards,
Robin

Initial load for Object CUSTOMER_MAIN

Hi,
My client has taken their initial load more than year back. During that time some 900 odd customers where not copied to CRM from ECC because of various master data issues. Now, they have entry of Business Partner in table crmm_but_custno however none of them are actually downloaded from ECC.
We have given requirement to download them again from ECC and create them in CRM. For the same I tried to download them using CRMM_BUPA_MAP but due to the fact those customers has been part of initial load the system is taking delta load for them.
Here, I am facing error Business partner with GUID xxx does not exist (this error would come because system in taking delta load with update indicator 'U' which should come as 'I' for insert as those customer are not created yet!)
The main issue here is even in synchronization or initial load if we download the customer back which were part of initial load system would take only delta values and not all data from ECC.
Does any one has any suggestion how to download data with full details in them as they would come in initial load in this case?
I have already attempted following option:
1. Used initial load again
2. Synchronization with request using Tcode R3AR2/R3AR4/CRMM_BUPA_MAP
Thanks,
Alok Mehta

Hi Sudhir,
Thanks for the answer. I tried the same but I am getting following error in BDOC analysis:
Customer number xxx is already assigned to a business partner.
The above error is coming because this customer was part of initial load however the BDOCs were in error mode and no one had tried to reprocess them after clearing errors.
Now, I do not have those BDOC as they are deleted from the system. I am suspecting that I need to delete some entry in table where the reference was stored in earlier initial run.
Request you to please reply in case you have any suggestions.
Thanks,
Alok

Delta and initial load

Hi,
Can anyone explain what is delta and initial load and how to perform it for master data like business partner,products and transaction data like service tickets
Thanks
Ganesh

Hi Ganesh,
Initial load is when you download objects like materials, customers, installed base etc from ECC to CRM. Delta load is any changes to these objects in ECC are automatically downloaded to CRM. It could be from CRM to ECC as well.
You have to set up the subscriptions for the objects that you want to download from ECC to CRM. There is a configuration setting to activate delta downloads also.
Thanks
Ashish

Initial load of sales orders from R3 to CRM without statuses

1) Some sales orders were uploaded into CRM without statuses in the headers or line items.
2) Some sales orders were uploaded without status, ship-to, sold-to, payer.....If I deleted them and use R3AR2, R3AR4 to upload each individual then no problem.
Any ideas or suggestions?
Thanks.

Hi,
   Request load of adapter objects uses different extractor modules for extracting the data from external system to CRM. While your initial load of sales docs. will use a different extraction logic bases on the filter conditions specfied on trx.
R3AC1
   There may be a problem in the extraction of data from the source system (don't know if you are using a R/3). Can you please de-register the R/3 (i suppose) outbound queue using trx.
SMQS
, and then debug the extraction (R/3 outbound) before the data is sent to CRM using FM
CRS_SEND_TO_SERVER
   If this goes well, you may try debugging the mapper in CRM inbound and the validation module in CRM as a last resort. Also, please refer to trx.
SMW01
to see if the Bdocs are fully processed.
Hope this helps...Reward if helpful.
Regards,
Sudipta.

After Upgrade BI Initial load is taking much time

Dear Friends,
We had BW 3.5 on Windows 2003(32 bit) & SQL 2000.
I upgraded it to BI 7.01 (EHP1 SR1) with Windows 2003(64bit),SQL 2005 & completed all followup activities.
Now when we are doing initial load it is taking long time. Please do let me know your inputs as soon as possible.
Regards,
Sunil Maurya.

Hi ,
I created the thread under netweaver forum.
But still I'll check & try create it in correct forum.
Regards,
Sunil Maurya

MacBook Pro (mid 2010) - Slow Startup and Initial Load of Apps after Mavericks Install

Hello everyone,
Long time Snow Leopard user here. I've been absolutely, 100% thrilled with my MBP's performance / speed since mid 2010. Since installing Mavericks I've noticed two things:
1. Initial on boot load times seem much slower
2. The first time you open an app (Safari, even TextEdit) is far slower than in Snow Leopard.
Now granted, once the computer has been on for about 5 minutes, and once you've had an application open for 1-2 minutes, than performance is okay once again. But it seems that quite literally everytime you do "anything" for the first time since the computer has been turned on you run the risk of a spinning beachball and an extended wait. This simply never happened in Snow Leopard.
I'm not a computer science major but I do understand that when you do something for the first time since a reboot it will need to load new files into the RAM which takes time. However, I've been using this computer since 2010 and have never experienced this behavior / speed / delay, etc... something seems fundamentally different.
For example, even just opening finder, and navigating to the Applications folder results in sluggish behavior the first time. Also, anytime you first click the top menu bar in an application you run the risk of a beachball.
It doesn't seem like a failing hard drive because I can read/write large chunks of data one an app is finally loaded. It's just initially loading the app takes quite literally 10-20 times longer than Snow Leopard. It seems like perhaps Mavericks itself, the core of the new OS was perhaps installed in a bad sector of the HD, but none of my other files are on bad sectors... if that makes sense. Again - I'm not a computer science major so I'm largely just making things up
It also seems as if multitasking and switching between several open apps has seen a decrease in performance. Could it be that perhaps Mavericks RAM management is superior to Snow Leopard, but only if there is a TON of RAM to go around? Could it be as simple as Macs with only 4GB installed should not be allowed to even install Mavericks?
Does this sound normal for Mavericks considering I have a C2D processor, a non SSD, and only 4GB ram? I know those specs are "outdated" for 2014, but keep in mind these were the specs that I've always had and with Snow Leoapard I was consistently thrilled with the speed of the computer.
I suppose my question is: should my strategy be to simply turn the computer on, get a cup of coffee and let everything load and maybe even have my frequently used apps load on startup, etc... and carry on as normal? Does something seem off? Should I invest in a new SSD / RAM upgrade? I know the upgrades couldn't hurt, but the issue is that I was perfectly content until upgrading to Mavericks
I've tried booting into OS X Recovery mode and using the Disk Utility. I've tried Safe Mode. I've included a "EtreCheck" report below. I'm open to any ideas / suggestions.
Thanks!!
Hardware Information:
          MacBook Pro (13-inch, Mid 2010)
          MacBook Pro - model: MacBookPro7,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:10:48
Disk Information:
          Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 249.2 GB (228.46 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Keyboard Hub
                    Logitech USB Receiver
                    Apple Inc. Apple Keyboard
          Apple Internal Memory Card Reader
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
          [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          None
Internet Plug-ins:
          FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
          AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               4%          WindowServer
               1%          EtreCheck
               0%          mds
               0%          mds_stores
               0%          airportd
Top Processes by Memory:
          111 MB          com.apple.IconServicesAgent
          94 MB          Finder
          57 MB          Dock
          53 MB          SystemUIServer
          53 MB          EtreCheck
Virtual Memory Information:
          1.64 GB          Free RAM
          1.42 GB          Active RAM
          314 MB          Inactive RAM
          390 MB          Wired RAM
          316 MB          Page-ins
          0 B          Page-outs

Wish I could be of some help, but I'm having similar issues on my mid 2011 macbook pro with 8 GB ram. It's very frustrating. I haven't worked on a computer this slow since the early 90's. Even simple things like signing in to this site bring up the beach ball for maybe ten seconds. When opening up apps I often have to wait minutes, and often end up force quitting when they hang. I'm using force quit a dozen or more times a day, when it used to be very rare.
I don't know if it's Mavericks. I installed a new hard drive in November, but the problems really started getting bad since the latest upgrade.
It's not just opening apps. If I have an app open in the background and switch to it I have similar issues. Watching a simple video is often accompanied by stalls and delays - which is really bad as I'm often using the laptop to edit video. It's become unuseable for work.
Perhaps the most frustrating is clicking on a link, only to find Safari decides to complete a previous scroll that it had paused. The page jumps down, and sometimes I end up clicking on a link I didn't want. Then I have to wait for THAT spinning beach ball before I can go back to the previous spinning beach ball.
It can take up to ten minutes to restart. I've tried everything I could find on these pages so far, and nothing has worked.
I thought maybe it was something I've done (and perhaps it is), but I keep seeing others with similar issues.

How to use more than one application server during initial load?

Hi,
we plan to use more than one application server in CRM during initial download in order to increase the number of parallel requests and to decrease the time for the initial load. Is there a way to allocate requests to more than one server? Is is possible via multiple rfc connections for consumer CRM in CRMRFCPAR?
Thanks.
Alexander Schiffer

Hi Naresh,
thanks for your answer. It has solved my problem. SMLG is the transaction that I was looking for.
Two more OSS notes that helped me to guide our basis into the right direction:
OSS 593058 - New RFC load balancing procedure
OSS 1413986 - SMLG: Possibility to select a favorite type for Ext.RFCs
Thanks again.
Alexander Schiffer

Initial load failing between identical tables. DEFGEN skewed and fixable?

Initial load failing between identical tables. DEFGEN skewed and fixable?
Error seen:
2013-01-28 15:23:46 WARNING OGG-00869 [SQL error 0 (0x0)][HP][ODBC/MX Driver] DATETIME FIELD OVERFLOW. Incorrect Format or Data. Row: 1 Column: 11.
Then compared the discard record against a select * on the key column.
Mapping problem with insert record (target format)...
**** Comparing Discard contents to Select * display
ABCHID = 3431100001357760616974974003012 = 3431100001357760616974974003012
*!!! ABCHSTEPCD = 909129785 <> 9 ???*
ABCHCREATEDDATE = 2013-01-09 13:43:36 = 2013-01-09 13:43:36
ABCHMODIFIEDDATE = 2013-01-09 13:43:36 =2013-01-09 13:43:36
ABCHNRTPUSHED = 0 = 0
ABCHPRISMRESULTISEVALUATED = 0 = 0
SABCHPSEUDOTERM = 005340 = 005340
ABCHTERMID = TERM05 = TERM05
ABCHTXNSEQNUM = 300911112224 = 300911112224
ABCHTIMERQSTRECVFROMACQR = 1357799914310 = 1357799914310
*!!! ABCTHDATE = 1357-61-24 00:43:34 <> 2013-01-09 13:43:34*
ABCHABCDATETIME = 2013-01-09 13:43:34.310000 = 2013-01-09 13:43:34.310000
ABCHACCOUNTABCBER =123ABC = 123ABC
ABCHMESSAGETYPECODE = 1210 = 1210
ABCHPROCCDETRANTYPE = 00 = 00
ABCHPROCCDEFROMACCT = 00 = 00
ABCHPROCCDETOACCT = 00 = 00
ABCHRESPONSECODE = 00 = 00
…. <snipped>
Defgen comes out same when run against either table.
Also have copied over and tried both outputs from DEFGEN.
+- Defgen version 2.0, Encoding ISO-8859-1
* Definitions created/modified 2013-01-28 15:00
* Field descriptions for each column entry:
* 1 Name
* 2 Data Type
* 3 External Length
* 4 Fetch Offset
* 5 Scale
* 6 Level
* 7 Null
* 8 Bump if Odd
* 9 Internal Length
* 10 Binary Length
* 11 Table Length
* 12 Most Significant DT
* 13 Least Significant DT
* 14 High Precision
* 15 Low Precision
* 16 Elementary Item
* 17 Occurs
* 18 Key Column
* 19 Sub Data Type
Database type: SQLMX
Character set ID: ISO-8859-1
National character set ID: UTF-16
Locale: en_EN_US
Case sensitivity: 14 14 14 14 14 14 14 14 14 14 14 14 11 14 14 14
Definition for table RT.ABC
Record length: 1311
Syskey: 0
Columns: 106
ABCHID 64 34 0 0 0 0 0 34 34 34 0 0 32 32 1 0 1 3
ABCHSTEPCD 132 4 39 0 0 0 0 4 4 4 0 0 0 0 1 0 0 0
ABCHCREATEDDATE 192 19 46 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHMODIFIEDDATE 192 19 68 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHNRTPUSHED 130 2 90 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPRISMRESULTISEVALUATED 130 2 95 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPSEUDOTERM 0 8 100 0 0 0 0 8 8 8 0 0 0 0 1 0 0 0
ABCTERMID 0 16 111 0 0 0 0 16 16 16 0 0 0 0 1 0 0 0
ABCHTXNSEQNUM 0 12 130 0 0 0 0 12 12 12 0 0 0 0 1 0 0 0
ABCHTIMERQSTRECVFROMACQR 64 24 145 0 0 0 0 24 24 24 0 0 22 22 1 0 0 3
ABCTHDATE 192 19 174 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHABCDATETIME 192 26 196 0 0 1 0 26 26 26 0 6 0 0 1 0 0 0
ABCHACCOUNTABCER 0 19 225 0 0 1 0 19 19 19 0 0 0 0 1 0 0 0
ABCHMESSAGETYPECODE 0 4 247 0 0 1 0 4 4 4 0 0 0 0 1 0 0 0
ABCHPROCCDETRANTYPE 0 2 254 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDEFROMACCT 0 2 259 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDETOACCT 0 2 264 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHRESPONSECODE 0 5 269 0 0 1 0 5 5 5 0 0 0 0 1 0 0 0
… <snipped>
The physical table shows a PACKED REC 1078
And table invoke is:
-- Definition of table ABC3.RT.ABC
-- Definition current Mon Jan 28 18:20:02 2013
ABCHID NUMERIC(32, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHSTEPCD INT NO DEFAULT HEADING '' NOT NULL NOT
DROPPABLE
, ABCHCREATEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHMODIFIEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHNRTPUSHED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPRISMRESULTISEVALUATED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPSEUDOTERM CHAR(8) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTERMID CHAR(16) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTXNSEQNUM CHAR(12) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTIMERQSTRECVFROMACQR NUMERIC(22, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCTHDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHABCDATETIME TIMESTAMP(6) DEFAULT NULL HEADING ''
, ABCHACCOUNTNABCBER CHAR(19) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHMESSAGETYPECODE CHAR(4) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETRANTYPE CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDEFROMACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETOACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHRESPONSECODE CHAR(5) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
…. Snipped
I suspect that the fields having subtype 3 just before the garbled columns is a clue, but not sure what to replace with or adjust.
Any and all help mighty appreciated.

Worthwhile suggestion, just having difficulty applying.
I will tinker with it more. But still open to more suggestions.
=-=-=-=-
Oracle GoldenGate Delivery for SQL/MX
Version 11.2.1.0.1 14305084
NonStop H06 on Jul 11 2012 14:11:30
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-01-31 15:19:35
Operating System Version:
NONSTOP_KERNEL
Version 12, Release J06
Node: abc3
Machine: NSE-AB
Process id: 67895711
Description:
** Running with the following parameters **
2013-01-31 15:19:40 INFO OGG-03035 Operating system character set identified as ISO-8859-1. Locale: en_US_POSIX, LC_ALL:.
Comment
Comment
REPLICAT lodrepx
ASSUMETARGETDEFS
Source Context :
SourceModule : [er.init]
SourceID : [home/ecloud/sqlmx_mlr14305084/src/app/er/init.cpp]
SourceFunction : [get_infile_params]
SourceLine : [2418]
2013-01-31 15:19:40 ERROR OGG-00184 ASSUMETARGETDEFS is not supported for SQL/MX ODBC replicat.
2013-01-31 15:19:45 ERROR OGG-01668 PROCESS ABENDING.

Initial Load of Customers as Persons?

Similar Messages

Maybe you are looking for