Initial load of DNL_CUST_CNDALL in running status

Hi ALL,
I am doing initial load of DNL_CUST_CNDALL, it is in running status in R3AM1.
Prior to this I have downloaded several other customizing objects and those have been downloaded successfully. My system has highest support package implemented according to the SAP NOTE I found.
Also there is no inbound queue in CRM and outbound queue in R/3 for this object.
All the queues are registered also in both systems(smqr and smqs).
After aborting the object in R3AM1, I have tried downloading the object again several times, still no entries are coming in any queues.
PLEASE help me on this.

Hi Mahaadhevan,
please check the table CRMRFCPAR as well where you store the entry for the logical system. Check as well notes 588701 76501and SAP Best Practice for Connectivity and Replication.
Please reward with point if it helps.
Regards,
AndreA

Similar Messages

Does re-running a MDM Initial Load restart from the first record?

Is there a way to restart an Initial load? I was running a new initial materials load in my ECC system for MDM (MDM_CLNT_EXTR) which was running a very long time (5 days). The background job hit a bad piece of data and crashed.
My question is: when I re-run my initial load job, will it start over from the first record, or will it pick up from the last material/IDOC and resume processing? I would prefer not to re-process all 1.7M materials since the job was very near the end before it crashed.
Thanks,
Denis

Hello,
There are two modes which are available in Client Extractor, Initial and Delta.
If you select Initial it will start from the first record, that you mention in the selection Criteria.
In Delta mode, any new records created will be sent to MDM.
For your issue, in the initial mode, select the Material Number from and to, which have not been updated in MDM.
This is will ensure, that only the records that have not been sent.
Regards,
Abhishek

Initial Load of Business Partner not running

Dear SAP CRM gurus,
We have been able to perform initial download of Business Partners from ECC into our CRM system. We have done this many times. We do not know what is wrong, but since last week, we are unable to perform initial download of our Business Partners. When we run initial download using R3AS, there is no BDoc created, there is also no queues on inbound/outbound of both CRM and ECC system. There is also no error. R3AM1 showing initial download complete but only with 1 block. But there is no BDoc created!! All other replication objects are fine, except that BUPA_MAIN we are unable to perform initial download. Delta download is fine as well.
We have not changed anything on SMOEAC and it is all correct. Entries on CRMSUBTAB and CRMC_BUT_CALL_FU is also correct.
Please help!!

Hi,
When you are downloading CUSTOMER_MAIN through R3AS are u getting any warning or error??
or r u getting pop up with green light??
If u are getting any warning or error then go to tcode: smwp. Then go to runtime information
->Adapter Status Information>Initial Load Status
under that check running objects and check customer_main is there or not??
if found delete that entry and do initial load again.
Also check outbound queue of R/3 and inbound queue of CRM .
If then also its not working do request download using r3ar2, r3ar3 and r3ar4 and check whether it is working or not.
If helpful kindly reward me.
Thanks & Regards,
Anirban

URGENT!pls hlpDAC Full Load always in 'Running' status at a particular task

Hi Friends,
I started a full load yesterday.There are totally 257 tasks.The load went fine without issues till 248th task.But while executing 249th task(Load into Activity Fact),it is always in 'Running' status and is not getting completed even after executing for 2 hours. I checked in the informatica workflow monitor and found that the workflow is in 'running' state and is not getting completed. When right-clicked the session and selected run properties,I can see that 0 rows are inserted into the target table.So I manually tried to stop the workflow.Even after that the task is always in 'Stopping' status and is not getting stopped.Then I manually aborted the workflow.
Below is the session log file.Could you please check and let me know.
Regards,
Vijay
Edited by: vijayobi on Jul 22, 2011 4:26 AM

Hi Friends,
We executed a Full-Load again on Saturday i.e 23rd July 2011.This time we allowed the task 'Load into Activity Fact_CUSTOM' to execute without stopping it manully like we did in the previous data load.It got executed for 3 hours and 45 minutes and then 'Failed' giving the following error ORA-01652(unable to extend temp segment by string in tablespace string).This task got executed successfully in our dev environment.Below is what we found in the sessio .log file and help us resolve this issue.Please revert back as soon as possible as we have this issue in our prod environment.
2011-07-23 14:56:07 : ERROR : (8128 | LKPDP_25:READER_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : RR_4035 : SQL Error [
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP
Database driver error...
Function Name : Execute
SQL Stmt : SELECT distinct LOOKUP_TABLE.ROW_WID AS ROW_WID, LOOKUP_TABLE.GEO_WID AS GEO_WID, LOOKUP_TABLE.INTEGRATION_ID AS INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT AS EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT AS EFFECTIVE_TO_DT FROM W_PARTY_D LOOKUP_TABLE,W_ACTIVITY_FS LEFT OUTER JOIN W_CUSTOMER_ACCOUNT_DON (W_ACTIVITY_FS.CUSTOMER_ACCOUNT_ID=W_CUSTOMER_ACCOUNT_D.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=W_CUSTOMER_ACCOUNT_D.DATASOURCE_NUM_ID)WHERECOALESCE(W_ACTIVITY_FS.CUSTOMER_ID,W_CUSTOMER_ACCOUNT_D.PARTY_ID)=LOOKUP_TABLE.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=LOOKUP_TABLE.DATASOURCE_NUM_IDAND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) >= LOOKUP_TABLE.EFFECTIVE_FROM_DT AND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) < LOOKUP_TABLE.EFFECTIVE_TO_DTORDER BY LOOKUP_TABLE.INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT, LOOKUP_TABLE.ROW_WID, LOOKUP_TABLE.GEO_WID -- ORDER BY INTEGRATION_ID,DATASOURCE_NUM_ID,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,ROW_WID,GEO_WID
Oracle Fatal Error
Database driver error...
Function Name : Execute
SQL Stmt : SELECT distinct LOOKUP_TABLE.ROW_WID AS ROW_WID, LOOKUP_TABLE.GEO_WID AS GEO_WID, LOOKUP_TABLE.INTEGRATION_ID AS INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT AS EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT AS EFFECTIVE_TO_DT FROM W_PARTY_D LOOKUP_TABLE,W_ACTIVITY_FS LEFT OUTER JOIN W_CUSTOMER_ACCOUNT_DON (W_ACTIVITY_FS.CUSTOMER_ACCOUNT_ID=W_CUSTOMER_ACCOUNT_D.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=W_CUSTOMER_ACCOUNT_D.DATASOURCE_NUM_ID)WHERECOALESCE(W_ACTIVITY_FS.CUSTOMER_ID,W_CUSTOMER_ACCOUNT_D.PARTY_ID)=LOOKUP_TABLE.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=LOOKUP_TABLE.DATASOURCE_NUM_IDAND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) >= LOOKUP_TABLE.EFFECTIVE_FROM_DT AND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) < LOOKUP_TABLE.EFFECTIVE_TO_DTORDER BY LOOKUP_TABLE.INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT, LOOKUP_TABLE.ROW_WID, LOOKUP_TABLE.GEO_WID -- ORDER BY INTEGRATION_ID,DATASOURCE_NUM_ID,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,ROW_WID,GEO_WID
Oracle Fatal Error].
2011-07-23 14:56:07 : ERROR : (8128 | LKPDP_25:READER_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : BLKR_16004 : ERROR: Prepare failed.
2011-07-23 14:56:07 : INFO : (8128 | WRITER_1_*_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : WRT_8333 : Rolling back all the targets due to fatal session error.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.LKP_W_PARTY_D_With_Geo_Wid], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXP_Decode_CustomerId], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXP_Decode_CustomerId], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.LKP_W_CUSTOMER_ACCOUNT_D_With_Party_ID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.LKP_W_CUSTOMER_ACCOUNT_D_With_Party_ID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXPTRANS], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXPTRANS], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [FIL_ETL_PROC_WID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [FIL_ETL_PROC_WID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [MPLT_Get_ETL_Proc_WID.Exp_Decide_Etl_Proc_Wid], and the session is terminating.
2011-07-23 14:56:07 : INFO : (8128 | WRITER_1_*_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : WRT_8325 : Final rollback executed for the target [W_ACTIVITY_F] at end of load
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [MPLT_Get_ETL_Proc_WID.Exp_Decide_Etl_Proc_Wid], and the session is terminating.
2011-07-23 14:56:07 : INFO : (8128 | MANAGER) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : PETL_24007 : Received request to stop session run. Attempting to stop worker threads.
2011-07-23 14:56:07 : INFO : (8128 | WRITER_1_*_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : WRT_8035 : Load complete time: Sat Jul 23 14:56:07 2011
Thanks in advance.
Vinay

Initial load of sales orders from R3 to CRM without statuses

1) Some sales orders were uploaded into CRM without statuses in the headers or line items.
2) Some sales orders were uploaded without status, ship-to, sold-to, payer.....If I deleted them and use R3AR2, R3AR4 to upload each individual then no problem.
Any ideas or suggestions?
Thanks.

Hi,
   Request load of adapter objects uses different extractor modules for extracting the data from external system to CRM. While your initial load of sales docs. will use a different extraction logic bases on the filter conditions specfied on trx.
R3AC1
   There may be a problem in the extraction of data from the source system (don't know if you are using a R/3). Can you please de-register the R/3 (i suppose) outbound queue using trx.
SMQS
, and then debug the extraction (R/3 outbound) before the data is sent to CRM using FM
CRS_SEND_TO_SERVER
   If this goes well, you may try debugging the mapper in CRM inbound and the validation module in CRM as a last resort. Also, please refer to trx.
SMW01
to see if the Bdocs are fully processed.
Hope this helps...Reward if helpful.
Regards,
Sudipta.

Connection Refused Error while running AS ABAP Initial Load

All,
I've never connected SAP NW IdM to an actual SAP system before, and I feel like I'm missing some obvious step of configuration, but I can't figure out what.
We are in the process of trying provision user accounts to our SAP ABAP systems. My first step was to try to read all of the existing accounts from the ABAP system:
Our Basis team created me a Communication user with the proper authorizations (I ensured that the authorizations included in SAP_BC_SEC_IDM_COMMUNICATION)
I created a repository using the SAP NewWeaver AS ABAP (Specific Application Server) Repository Template (No CUA, No SNC) using that user's credentials
I then used the Job Wizard and used the job template AS ABAP - Initial Load, specifying my repository above.
When I run the job I get the following:
Initializing SAP connection with parameters:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server failed Connect_PM MSHOST=<IPADDRESS>, R3NAME=<SID>, GROUP=PUBLIC LOCATION CPIC (TCP/IP) on local host ERROR partner not reached (host <IPADDRESS>, service sapms<SID>) TIME Wed Jun 01 13:54:36 201 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r.cpp LINE 8840 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
Error Init failed
I'm running SAP NW IdM 7.1 SP5 on Windows Server 2003 with MSSQL 2005. The ABAP server is on a UNIX box with an Oracle 10.2 dB.
Is there additional configuration that needs to take place on the ABAP side to accept the connection?
I've tried to find documentation on this, but have been unsuccessful. If someone could point me to the correct documents, or at least point me in the right direction for troubleshooting, it would be greatly appreciated.

Ankur,
Looks like the endpoint URL of the webservice is not updated and still pointing to the localhost. Try changing it to http://<ip_addres_of_your_server>:7101..... and see if it works fine then.
-Arun

Error when we are running the job "AS ABAP - Initial Load" for a ABAP Syste

Hi,
We are getting the below error when we are running the job "AS ABAP - Initial Load" for a ABAP System.
Pls note that we have maintained the below entry types to the Identieny Store & we are still getting the error.
Request you to help me
MX_TITLE_SUPPLEMENT
MX_SALUTATION
MX_NAME_PREFIX
MX_ACADEMIC_TITLE
Error----
runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_SALUTATION!!Mr.!!EN)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_SALUTATION' AND ValText = 'Mr.' AND ValLocale = 'EN') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_TITLE_SUPPLEMENT!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_TITLE_SUPPLEMENT' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_SALUTATION!!Mr.!!EN)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_SALUTATION' AND ValText = 'Mr.' AND ValLocale = 'EN') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_TITLE_SUPPLEMENT!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_TITLE_SUPPLEMENT' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error putNextEntry failed storingMANJUHB
Exception from Add operation:com.sap.idm.ic.ToPassException: ToIDStore.addEntry failed storing entry 'MANJUHB'. IDStore returned error message: " Value not legal for this attribute:Attribute: MX_ACADEMIC_TITLE_2" when storing attribute 'MX_ACADEMIC_TITLE_2=$FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$'
Exception from Modify operation:com.sap.idm.ic.ToPassException: ToIDStore.modEntry failed updating entry 'MANJUHB'. IDStore returned error message: "Entry does not exist" when fetching entry

The Probelm was resolved after editing the Script..... "sap_getHelpValKey.js"

Query not run on initial load

I have an application with several pages. I have made them in the same way, but they act different.
What I have:
One region with a few select lists, and a submit button. The select list has a default value (which is sett identical in all pages in this discussion)
One region with a report, that runs a SQL based on the choices made with the select lists.
My problem is on initial loade, when I haven't made any choices in the select list. The defaults are set as expected. In some of the pages it loads as expected and the report looks nice and in accordance with the default values set in the select list. In some other pages it always starts wit ''No data found' in the report. Even when the select list has the correct defaults, and if I press the submit button the page reloads with the proper report. As far as I can tell I have made the two pages in the same manner.
It also return the expected result the second time you arrive at the page. So if the initial load returned no data found, and you navigate to another page and back again it will show the report with data.
My question is what can prevent the report from getting the proper defaults set and running the query on initial load of the page that is not the case when the page is resubmitted or loaded a second time.

I have looked at it without finding anything. I took an example from one page that has 3 out of 4 regions empty. The booked passenger region has data
This is the log from the initial log:
.00:
0.01: S H O W: application="106" page="1" workspace="" request="" session="716623568740864"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -05:00
0.01: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: NLS: Language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2233622453240425
0.01: ...Session ID 716623568740864 can be used
0.01: ...Application session: 716623568740864, user=CFA
0.01: ...Determine if user "OPS" workspace "1065304065321761" can develop application "106" in workspace "1065304065321761"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.01: ...Metadata: Fetch page attributes for application 106, page 1
0.01: Fetch session state from database
0.02: Branch point: BEFORE_HEADER
0.02: Fetch application meta data
0.02: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: Computation point: BEFORE_HEADER
0.02: Processing point: BEFORE_HEADER
0.03: Show page template header
0.03: Computation point: AFTER_HEADER
0.03: Processing point: AFTER_HEADER
0.03: Region:
0.03: Item: P1_SHIP COMBOBOX
0.04: Item: P1_DEP_DATE MULTIPLESELECT
0.04: Item: P1_LEG COMBOBOX
0.05: Computation point: BEFORE_BOX_BODY
0.05: ...Perform computation of item: F106_DUMMY, type=FUNCTION_BODY
0.05: ...Performing function body computation
0.06: ...Session State: Save "F106_DUMMY" - saving same value: ""
0.06: Processing point: BEFORE_BOX_BODY
0.06: Region: Message
*0.06: Region: Gender Distribution*
*0.06: Region: Nationality distribution*
0.06: Computation point: AFTER_BOX_BODY
0.06: Processing point: AFTER_BOX_BODY
*0.06: Region: Booked passengers*
*0.07: Region: Age Distribution*
0.07: Computation point: BEFORE_FOOTER
0.07: Processing point: BEFORE_FOOTER
0.07: Region:
0.07: Item: P0_UPDATED DISPLAY_ONLY_HTML
0.08: Show page tempate footer
0.08: Computation point: AFTER_FOOTER
0.08: Processing point: AFTER_FOOTER
0.08: Log Activity:
0.08: Execute Count=0
0.08: End Show:
This is the log after I press go and I get data in 4 of 4 regions:
0.00: A C C E P T: Request="Go"
0.00: Metadata: Fetch application definition and shortcuts
0.00: NLS: wwv_flow.g_flow_language_derived_from=FLOW_PRIMARY_LANGUAGE: wwv_flow.g_browser_language=en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -05:00
0.02: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: Fetch session state from database
0.02: ...Check session 640739340114653 owner
0.02: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Check for session expiration:
0.02: ...Metadata: Fetch Page, Computation, Process, and Branch
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 106, page 1
0.03: ...Validate item page affinity.
0.03: ...Validate hidden_protected items.
0.03: ...Check authorization security schemes
0.03: Session State: Save form items and p_arg_values
0.03: ...Session State: Save Item "P1_SHIP" newValue="CFA" "escape_on_input=""
0.03: ...Session State: Save Item "P1_DEP_DATE" newValue="20100414" "escape_on_input="N"
0.03: ...Session State: Save Item "P1_LEG" newValue="All" "escape_on_input=""
0.03: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: Branch point: BEFORE_COMPUTATION
0.03: Computation point: AFTER_SUBMIT
0.03: Tabs: Perform Branching for Tab Requests
0.03: Branch point: BEFORE_VALIDATION
0.03: Perform validations:
0.03: Branch point: BEFORE_PROCESSING
0.03: Processing point: AFTER_SUBMIT
0.03: Branch point: AFTER_PROCESSING
0.03: ...Evaluating Branch: AFTER_PROCESSING type: "REDIRECT_URL" button: 7515820301908562 branch: (Unconditional)
0.00:
0.00: S H O W: application="106" page="1" workspace="" request="" session="640739340114653"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -05:00
0.01: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: NLS: Language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2233622453240425
0.01: ...Session ID 640739340114653 can be used
0.01: ...Application session: 640739340114653, user=CFA
0.01: ...Determine if user "OPS" workspace "1065304065321761" can develop application "106" in workspace "1065304065321761"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.02: ...Metadata: Fetch page attributes for application 106, page 1
0.02: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.03: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.03: ...NLS: Set date format="DD-MON-RR"
0.03: Computation point: BEFORE_HEADER
0.03: Processing point: BEFORE_HEADER
0.04: Show page template header
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: Region:
0.05: Item: P1_SHIP COMBOBOX
0.06: Item: P1_DEP_DATE MULTIPLESELECT
0.06: Item: P1_LEG COMBOBOX
0.06: Computation point: BEFORE_BOX_BODY
0.06: ...Perform computation of item: F106_DUMMY, type=FUNCTION_BODY
0.06: ...Performing function body computation
0.06: ...Session State: Save "F106_DUMMY" - saving same value: ""
0.06: Processing point: BEFORE_BOX_BODY
0.07: Region: Message
0.07: Region: Gender Distribution
0.07: Region: Nationality distribution
0.07: Computation point: AFTER_BOX_BODY
0.07: Processing point: AFTER_BOX_BODY
0.07: Region: Booked passengers
0.07: Region: Age Distribution
0.08: Computation point: BEFORE_FOOTER
0.08: Processing point: BEFORE_FOOTER
0.08: Region:
0.08: Item: P0_UPDATED DISPLAY_ONLY_HTML
0.08: Show page tempate footer
0.08: Computation point: AFTER_FOOTER
0.08: Processing point: AFTER_FOOTER
0.08: Log Activity:
0.08: Execute Count=0
0.08: End Show:

Error while Initial load

Hi Forum,
Iam doing Middleware setup for downloading customer master from R/3 to CRM.Iam trying to do initial load of customizing objects viz.,DNL_CUST_ACGRPB,DNL_CUST_ADDR,
DNL_CUST_KTOKD,DNL_CUST_TVKN,DNL_CUST_TVLS,DNL_CUST_TVPV... which are to be loaded before doing initial load of CUSTOMER_MAIN.
while doing initial load of customizing objects iam getting the below mentioned error
001 No generation performed. Call transaction GN_START.
002 Due to system errors the Load is prohibited (check transaction MW_CHECK)!
-when I do GN_START
"A job is already scheduled periodically.
Clicking on 'Continue' will create another job
that starts immediately.
Do you want to continue?" message is displayed
and I have sheduled it.
But in SMWP transaction I can see in
BDoc Types: Generation of other runtime objects
Not generated / generated with errors 2 entries
 31.08.2006 05:33:50
and the objects with errors are
POT_LISTWRITE
SPE_DDIC_WRITE
-In transaction MW_CHECK, system displays message as No generation performed. Call transaction GN_START.
when I regenerate these objects(generated with errors)from the context menu I find no difference.
I have also referred to the Note :637836 and 661067 which also suggests to run few reports and GN_START but inspite of doing all the corretion parameters in the note Iam still unable to come out of the situation.
Please Guide
Thanks in Advance
Shridhar.
Message was edited by: Shridhar Deshpande

Hi Rahul,
Thanks for the reply.I checked in transaction MW_CHECK and the system throws the message as
No generation performed. Call transaction GN_START.
In the long text the below message is available
No generation performed. Call transaction GN_START.
Message no. SMW_GEN_KERNEL005
Diagnosis
An upgrade was performed.
System response
The Middleware is stopped because MW objects must be generated.
Procedure
Excecute transaction GN_START.
If GN_START is executed,I dont find any change.
I also checked in smq2in CRM and I found the status of the queue as below
 CL Queue Name Entries Status Date
200 CSABUPA0000000042 5 SYSFAIL 31.08.2006 09:54:05 31.08.2006 09:54:11
Thanks
Shridhar
Message was edited by: Shridhar Deshpande

IDM: AS ABAP - Initial Load

Hi,
I have installed IDM server and completed all the initial configuration steps.
I have created repository which connects to the IDES server using the template SAP Netweaver AS ABAP (specific application server).
Now i am running initial load for that repository but nothing is happening. I cant see any job log,system log for that initial load.
I have created another blank test job , which i execute and running fine.I can see the log of that blank job.But nothing is there for the job Initial Load.
schedule rule : on demand and i am executing it by clicking on RUN NOW. If i see the status of the job it shows idle.
Can you please help me in this?
Edited by: Abhilashak on May 5, 2011 9:13 AM

First, make sure it is set to use the correct dispatcher.
Second, go to the Status area for whatever folder that job is in. It should list all jobs for that folder, and any jobs that are "queued" will be bolded.
If it is bolded (it probably will be), it means that the job is queued to run but the dispatcher isn't running it for some reason. In that case, it could be the dispatcher it is set to run on isn't configured properly... Not sure what else would cause that.
I'm talking about this status area:
http://min.us/mvjy3gm

Initial load in middleware

Hi,
When i start the initial load with transaction R3AS, after specifying the load object and destinations on execution it throws me an error "NO GENERATION PERFORMED CALL TRANSACTION GN_START".
I tried running GN_START transaction, after completion of that, when i again try R3AS, it shows the same error again. ("NO GENERATION PERFORMED CALL TRANSACTION GN_START".)
Please suggest some ideas.
Thanks & Regards,
Karthik.

Hi Karthik,
Start transaction GN_START to generate the missing objects. The status of the generation (generation errors) can be seen in transaction GENSTATUS.
Regards.
Manuel.

Initial Load ISU / CRM Issues

Hi all
I have a few questions.
1. When you start an initial load for BUPA_MAIN in R3AS (from ISU to CRM) it seems only 1 DIAG WP is used (SM50). Is this normal?
2. In R3AM1 you can monitor the objects. Everything seems to be loaded but yet the status is still 'Running', is this because of BDoc validation errors?
Kind regards
Lucas

Hello Lucas,
There's a param(CRM_MAX_QUEUE_NUMBER_INITIAL) you can maintain in the table CRMPAROLTP of the source system(maintain this in the ERP system if you're doing an initial load from ERP to CRM)
Reference Notes:
350176
765236
The parval1 for Parameter CRM_MAX_QUEUE_NUMBER_INITIAL should be an integer(lets say 5) instead of a character 'X'. In such a case 5 queues would be formed for initial load.
Here's an example :
Parameter name CRM_MAX_QUEUE_NUMBER_INITIAL
Param. Name 2 <Object name> " for example CUSTOMER_MAIN
Param. Name 3
User <User> " for example CRM, if CRM is connected
Param. Value <no. of queues> " for example 5
Param. Value 2
So using the example above 5 R3AI_CUSTOMER_MAIN queues would be formed on the ERP and sent to CRM for processing.
The no. of available dialog work processes in SM51 available to the qRFC scheduler in CRM system should be able to handle the parallel processing of queues. So consult your basis administrators on this front.
Regards,
Rohit

Initial load prob

Hi,
I am facing some initial load problem I ve download the following objects using transaction R3AS but still some conditions are not replicated.
which object to be downloaded to get Condition Type from R/3 replicated to CRM?
DNL_CUST_CND
DNL_CUST_PRC
DNL_CUST_CNDAL
DNL_CUST_SCE
DNL_CUST_PRICE
Thanks
Ajay

Hi,
have you run the program /SAPCND/RV12N001, this will organize all your download conditions.
look at OSS Note 514952.
You will then need to create a specific download adapter for the condition table. Look at transaction SLG1 Object COND_EXCHANGE Subobject CUSTOMIZING to tell what is wrong.
try to follow the Building Blocks
Cheers
Ranga

DNL_CUST_PROD1 is in Running status for Delta Mat Grp - SRM 7.0

Hi Experts ,
We are configuring SRM7.0 with ECC6 ( Ehp4) having Classic Scenario
We already done initial upload of all Mat Type , Mat Grps, Material & Service Master data successfully. Now one Mat Grp is added in ECC, and I am tring to replicate this delta objectsin A3AS , but the DNL_CUST_PROD1 is in Running status from long time ( in R3AM1) where Source Site is ECC & Destination is SRM.
In ECC , these is no any queue stuck either in SMQ1 or SMQ2.
In SMWP in SRM, it is showing message with Red color Blocked queues: Client 212 Blocked outbound queue: Client 212 Q name DNL_CUST_PROD1 status SYSFAIL dest EDACLNT112 in section R3AI/R* Start Queues for Loads from OLTP .
In SRM, thes is nothing stuck in Inbound Queue in SMQ2, but I am afraid , Queue R3AI_DNL_CUST_PROD1 is stucked in Outbound Queue SMQ1 , showing destination ECC sytem , with status SYSFAIL !!! I tried to UNLOCK & Activate this queue , but no use.
1. I am wondered We are imporing Mat Grp from ECC to SRM, so in SRM ssytem, the Queue for Mat Grp ( a nd other objects should be Inbound ( i.e. SMQ2), then how/why the queue stuck in the Outbound Queue ( SMQ1) ?
2.Can anyone please suggest what should be the problem a nd solution on same .
Thanks in advane.
NAP

Thanks Nikhil. I varified all steps as per Note 720819 and all seems okay. Even Material Master is replicaing in SRM successfully.
Issue is we even unable to see the error log also. In SMQ2 stuck Queue for DNL_CUST_PROD1 from SYSFAIL ststus we can not guess the issue.Do we other hints to look ?
I am not cleared on the processing of Queues, i.e. how this imported objects looking into SMQ2 O/B Queue , it will be very appricated if you can explain in detail how these Queing works in SRM for importing Mat Types, Mat Grp & Material master data?
Thanks in advane.
NAP

Middleware - Initial Load problems

When I try to do initial load for DNL_CUST_ACGRPB from R/3, the status is 'Running' for long time and does not change to 'Done'. How to troubleshoot the problem and can someone help in resolving this issue?
thanks a lot in advance.
Sam

Sam,
Have you looked for any failed queues in either R/3 or CRM? Check SMQ1 in R/3 and SMQ2 in CRM. You should also see if the queues are registered in both systems, via SMQR.
For CRM:
Did you properly define your R/3 site in SMOEAC? Have you tested the RFC destination to R/3? Does the R/3 user have full security?
For R/3:
Did you check the settings in CRMRFCPAR? Does the RFC destination work correctly. Does the CRM user have full security?
For an object such as the customizing downloads, like DNL_CUST_ACGRPB normally the error surrounds your CRM setup between the two systems. If all those steps are workly correctly then you will need to consider a few other options.
Also you will need to do the following in CRM before you try loading again:
1. In R3AM1 hit the abort button on the object.
2. In either SMQ1 on R/3 or SMQ2 in CRM, delete the queue that failed.
3. Fix any configuration issues with your middleware setup.
4. Execute the initial load again for the object.
Good Luck,
Stephen

Initial load of DNL_CUST_CNDALL in running status

Similar Messages

Maybe you are looking for