Initial Load of materials into MDG 7

Hi there,
I would like to import all materials which should be in ECC through the MDG. But I am not sure what to do. CSV and is how?
Any suggestions?
Best Regards.
Per Møller Zanchetta

Hi
Threre are differnt methods
ALE  Transfer as Abdullah  correctly suggested
File upload as per below document
]How To... MDG-M: File Down- and Upload - SAP.com
By LSMW

Similar Messages

  • Bdoc error in SMW01 When Loading Materials into CRM

    Hi,
    We have recently done a system copy of our Production System to our Test System in R/3. We are now in the process of loading the Materials into our CRM 2007 Test System from the newly updated Test System in R/3.
    However, when loading the objects into CRM we are getting the following BDoc errors in smw01:
    Value X02 is not permitted for attribute Product Group 3 Value X02 - X09 is not permitted for attribute Product Group 3
    Area: COM_PRCAT
    Number: 20
    We have loaded the object DNL_CUST_PROD1 prior to the load of the MATERIALS object
    Does anyone know how this issue could be resolved?
    Thanks,
    Jonathan.

    Hi, this error refers to tax customizing so you should check what assingments you have in R/3 and then replicated on CRM.
    You can use transaction CRM_TAXCUST_VALIDATE to check the tax errors both in customers and materials.
    Then, according to the missing entries you will see on the transaction I told, you shoul check in R/3 tables TSKM and TSTL (used for materials).
    In table TSTL you have all the customizing made on R/3 transaction OVK1 and in table TSKM you´ll find the customizing made on transaction OVK4.
    The entries made there for your country should be the same ones made in CRM. The customizing path is the following:
    SPRO>CRM>Basic Functions>Taxes>Basic Settings>Tax Types and Tax Groups>Assing Tax Groups to SAP ECC Tax Classifications (Products)
    Here you have to enter the combination of:
    COUNTRYTAX TYPETAX GROUPTAX SEQTAx CL (which you should be able to fullfill after checking the R/3 tables I´ve told you..
    Please let me know if it helps,
    Regards,
    Lorena

  • Middleware initial load error on funcloc segment type (ADR2) does not exist

    Hello,
    We are doing initial loads of data into a new CRM 7.0 system.
    So far all objects have been done except Functional locations (FUNCLOC).
    During the initial load of the functional locations the various BDOCs all go into error state.
    The error is the same everywhere: segment type adr2 does not exist.
    If we deactivate the adr2 table In transaction R3AC1 and process again, we get the error message for the next table
    (Like:  segment type IFLOTX does not exist) and so on.
    IS there any settings we can do to manage these 'segments' or would there be another wa to solve this?
    Thanks.
    Joram

    Hello,
    Take a look at note 1271465, it does not talk about the ADR2 segment but about segment errors in SMW01 for functional location download. It might be useful. Observe especially the constraint in ERP version number, it might be that your ERP system is out-of-date/incompatible for this scenario.
    Second thing to check, go to SPRO>CRM>Master Data>Installed Base>Replication of technical objects from ERP
    There you'll find a mandatory customizing activity for Functional location download.
    And in the documentation of activity "Replication of Functional locations: Prerequisites and General information" you'll find all the necessairy actions to perform.
    This helped me in setting up funcloc replication in CRM 7.0.
    Hope this helps,
    Kind regards,
    Joost

  • Perform rollback occurs during initial load of material

    Hi Gurus,
    When we try to do the initial load of materials, only some part of the materials are replicated to SRM. We have the R3AC1 filter of taking only the materials with Purchasing view. We have no other filter. Although there are 576 materials that match this filter, only 368 materials are replicated to SRM.
    One thing we have observed is that when we have a look at SM21 (System Log) we see "Perform rollback" actions. Below is the details of the log. Can anyone help on our issue?
    Details Page 2 Line 30 System Log: Local Analysis of sapsrmt                  1
    Time
    Tip
    Nr
    Clt
    User
    İKodu
    Grp
    N
    Text
    23:52:59
    DIA
    003
    013
    ALEREMOTE
    R6
    8
    Perform rollback
    Perform rollback
    Details
    Recording at local and central time........................ 29.11.2006 23:52:59
    Task......
    Process
    User......
    Terminal
    Session
    İKodu
    Program
    Cl
    Problem cl
    Package
    87262
    Dialog work process No. 003
    ALEREMOTE
    1
    SAPMSSY1
    W
    Warning
    STSK
    Further details for this message type
    Module nam
    Line
    Error text
    Caller....
    Reason/cal
    thxxhead
    1300
    ThIRoll
    roll ba
    No documentation for syslog message R6 8 exists
    Technical details
    File
    Offset
    RecFm
    System log type
    Grp
    N
    variable message data
    4
    456660
    m
    Error (Function,Module,Row)
    R6
    8
    ThIRollroll bathxxhead1300

    Hi,
    Some of our material groups were problematic. After removing these the problem is resolved.
    FYI

  • Initial Loading of User Details into OIM 11g from Peoplesoft

    Hi,
    I wanted to pull user both (employee/contractor) details into OIM from People Soft. Which connector should i use.?
    PSFT User Management? or PSFT Employee Recon?
    Initially the users doesn't exist in OIM. I am looking for something like initial loading.
    Regards,
    Ashok

    Hi Kevin
    As per earlier version of PS ER connector, Oracle® Identity Manager Connector Guide for PeopleSoft Employee Reconciliation, Release 9.1.0, on section 3 Extending the Functionality of the Connector, there is guide on how to extend the connector to pull additional attributes from PS , by using peoplecode..
    But in Oracle® Identity Manager Connector Guide for PeopleSoft Employee Reconciliation,Release 11.1.1, am not able to find this information anymore.
    On how to pull additional attributes from PS like department, division and location, which is custom attributes in PS
    Please help !
    Many thanks

  • No initial load of Customers, Material and delta load of Sales Orders.

    Hi Experts,
    I am facing a very troublesome issue. I am not able to setup the Middleware portion for initial and delta loads. I read a lot of documents and corrected a lot of things. finally, the connectivity is done with R/3 and CRM. Initial load of all objects is successful (as per Best PRactices guide). Customizing load is successful.
    But after now I have these open issues for which I am unable to find any answers (am really exhausted!!):
    - Customer_main load, it was succesful, but no BP's of R/3 are available.
    - Material, it failed in SMW01, SMQ2, the errors are:
    Mat. for Initial Download: Function table not supported
    EAN xxxxxxxxxxxxxxxxxx does not correspond to the GTIN format and cannot be transferred
    EAN yyyyyyyyyyyyyyyyyy does not correspond to the GTIN format and cannot be transferred
    Plant xx is not assigned to a business partner
    - Sales order, it shows green bdoc, but error segments says "No upload to R/3" and the order does not flow to R/3.
    We had our system setup 3 years back for data transfer and Middleware. But few things changed and connectivity stopped. I did all that again now, but am not yet successful. Any inputs will be greatly appreciated.
    Thanks,
    -Pat

    Hi Ashvin,
    The error messages in SMW01 for MAterial initial load is :
         Mat. for Initial Download: Function table not supported
         EAN 123456789000562 does not correspond to the GTIN format and cannot be transferred
         EAN 900033056531434 does not correspond to the GTIN format and cannot be transferred
         Plant 21 is not assigned to a business partner
    I have done the DNL_PLANT load successfully. Why then the plant error?
    Some of the messages for BP:
    Messages for business partner 1331:
    No classification is assigned to business partner 1331
    For another,
         Partner 00001872(469206A60E5F61C6E10000009F70045E): the following errors occurred
         City Atlanta does not exist in country US
         Time zone EST_NA does not exist
         You are not allowed to enter a tax jurisdiction code for country US
         Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
    Now, the time zone EST is assigned by default in R/3. Where do I change that? I do not want to change time zones as this may have other impacts. Maybe CRM I cna change this, not for sure in R/3. City check has been deactivated in R/3 and CRM, still the error.
    Till these 2 are not solved, I cannot go into the Sales order loads.
    Any ideas will be greatly appreciated.
    Thanks,
    -Pat

  • Initial load of sales orders from R3 to CRM without statuses

    1) Some sales orders were uploaded into CRM without statuses in the headers or line items. 
    2) Some sales orders were uploaded without status, ship-to, sold-to, payer.....If I deleted them and use R3AR2, R3AR4 to upload each individual then no problem.
    Any ideas or suggestions?
    Thanks.

    Hi,
       Request load of adapter objects uses different extractor modules for extracting the data from external system to CRM. While your initial load of sales docs. will use a different extraction logic bases on the filter conditions specfied on trx.
    R3AC1
       There may be a problem in the extraction of data from the source system (don't know if you are using a R/3). Can you please de-register the R/3 (i suppose) outbound queue using trx.
    SMQS
    , and then debug the extraction (R/3 outbound) before the data is sent to CRM using FM
    CRS_SEND_TO_SERVER
       If this goes well, you may try debugging the mapper in CRM inbound and the validation module in CRM as a last resort. Also, please refer to trx.
    SMW01
    to see if the Bdocs are fully processed.
    Hope this helps...Reward if helpful.
    Regards,
    Sudipta.

  • MacBook Pro (mid 2010) - Slow Startup and Initial Load of Apps after Mavericks Install

    Hello everyone,
    Long time Snow Leopard user here.  I've been absolutely, 100% thrilled with my MBP's performance / speed since mid 2010.  Since installing Mavericks I've noticed two things:
    1. Initial on boot load times seem much slower
    2.  The first time you open an app (Safari, even TextEdit) is far slower than in Snow Leopard.
    Now granted, once the computer has been on for about 5 minutes, and once you've had an application open for 1-2 minutes, than performance is okay once again.  But it seems that quite literally everytime you do "anything" for the first time since the computer has been turned on you run the risk of a spinning beachball and an extended wait.  This simply never happened in Snow Leopard.
    I'm not a computer science major but I do understand that when you do something for the first time since a reboot it will need to load new files into the RAM which takes time.  However, I've been using this computer since 2010 and have never experienced this behavior / speed / delay, etc... something seems fundamentally different.
    For example, even just opening finder, and navigating to the Applications folder results in sluggish behavior the first time.  Also, anytime you first click the top menu bar in an application you run the risk of a beachball.
    It doesn't seem like a failing hard drive because I can read/write large chunks of data one an app is finally loaded.  It's just initially loading the app takes quite literally 10-20 times longer than Snow Leopard.  It seems like perhaps Mavericks itself, the core of the new OS was perhaps installed in a bad sector of the HD, but none of my other files are on bad sectors... if that makes sense.  Again - I'm not a computer science major so I'm largely just making things up
    It also seems as if multitasking and switching between several open apps has seen a decrease in performance.  Could it be that perhaps Mavericks RAM management is superior to Snow Leopard, but only if there is a TON of RAM to go around?  Could it be as simple as Macs with only  4GB installed should not be allowed to even install Mavericks? 
    Does this sound normal for Mavericks considering I have a C2D processor, a non SSD, and only 4GB ram?  I know those specs are "outdated" for 2014, but keep in mind these were the specs that I've always had and with Snow Leoapard I was consistently thrilled with the speed of the computer.
    I suppose my question is: should my strategy be to simply turn the computer on, get a cup of coffee and let everything load and maybe even have my frequently used apps load on startup, etc... and carry on as normal?  Does something seem off?  Should I invest in a new SSD / RAM upgrade?  I know the upgrades couldn't hurt, but the issue is that I was perfectly content until upgrading to Mavericks
    I've tried booting into OS X Recovery mode and using the Disk Utility.  I've tried Safe Mode.  I've included a "EtreCheck" report below.  I'm open to any ideas / suggestions.
    Thanks!!
    Hardware Information:
              MacBook Pro (13-inch, Mid 2010)
              MacBook Pro - model: MacBookPro7,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 320M - VRAM: 256 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:10:48
    Disk Information:
              Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 249.2 GB (228.46 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              Apple Inc. Built-in iSight
              Apple, Inc. Keyboard Hub
                        Logitech USB Receiver
                        Apple Inc. Apple Keyboard
              Apple Internal Memory Card Reader
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
    User Login Items:
              None
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
              QuickTime Plugin: Version: 7.7.3
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
              AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
    Old Applications:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   4%          WindowServer
                   1%          EtreCheck
                   0%          mds
                   0%          mds_stores
                   0%          airportd
    Top Processes by Memory:
              111 MB          com.apple.IconServicesAgent
              94 MB          Finder
              57 MB          Dock
              53 MB          SystemUIServer
              53 MB          EtreCheck
    Virtual Memory Information:
              1.64 GB          Free RAM
              1.42 GB          Active RAM
              314 MB          Inactive RAM
              390 MB          Wired RAM
              316 MB          Page-ins
              0 B          Page-outs

    Wish I could be of some help, but I'm having similar issues on my mid 2011 macbook pro with 8 GB ram. It's very frustrating. I haven't worked on a computer this slow since the early 90's. Even simple things like signing in to this site bring up the beach ball for maybe ten seconds. When opening up apps I often have to wait minutes, and often end up force quitting when they hang. I'm using force quit a dozen or more times a day, when it used to be very rare.
    I don't know if it's Mavericks. I installed a new hard drive in November, but the problems really started getting bad since the latest upgrade.
    It's not just opening apps. If I have an app open in the background and switch to it I have similar issues. Watching a simple video is often accompanied by stalls and delays - which is really bad as I'm often using the laptop to edit video. It's become unuseable for work.
    Perhaps the most frustrating is clicking on a link, only to find Safari decides to complete a previous scroll that it had paused. The page jumps down, and sometimes I end up clicking on a link I didn't want. Then I have to wait for THAT spinning beach ball before I can go back to the previous spinning beach ball.
    It can take up to ten minutes to restart. I've tried everything I could find on these pages so far, and nothing has worked.
    I thought maybe it was something I've done (and perhaps it is), but I keep seeing others with similar issues.

  • Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?

    Hi all,
       We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
       The following is from the Short Dump (ST22):
       The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
    program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
      The following are from ROIDOCPRMS table:
       MAXSIZE (in KB) : 20,000
       Frequency       :  10
       Max Processes : 3
      When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records.  I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
      How could I fix this problem, PLEASE ??
    Thanks,
    Venkat.

    Hello A.H.P,
    The following is the Start Routine:
    PROGRAM UPDATE_ROUTINE.
    $$ begin of global - insert your declaration only below this line  -
    TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
    DATA: material(18), plant(4).
    DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
    /BIC/AZCPR_O0200-CPR_BPARTN.
    $$ end of global - insert your declaration only before this line   -
    The follow definition is new in the BW3.x
    TYPES:
      BEGIN OF DATA_PACKAGE_STRUCTURE.
         INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
    TYPES:
         RECNO   LIKE sy-tabix,
      END OF DATA_PACKAGE_STRUCTURE.
    DATA:
      DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
           WITH HEADER LINE
           WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
    FORM startup
      TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
               MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
               DATA_PACKAGE STRUCTURE DATA_PACKAGE
      USING    RECORD_ALL LIKE SY-TABIX
               SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
      CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
    $$ begin of routine - insert your code only below this line        -
    fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
    to make monitor entries
       clear DATA_PACKAGE.
       loop at DATA_PACKAGE.
          select single /BIC/ZMATERIAL PLANT
             into (material, plant)
             from /BIC/AZCPR_O0400
             where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
             and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
           if sy-subrc = 0.
              DATA_PACKAGE-/BIC/ZMATERIAL = material.
              DATA_PACKAGE-plant = plant.
              modify DATA_PACKAGE.
              commit work.
           endif.
           select single CPR_ROLE into (role_assignment)
                         from /BIC/AZCPR_O0100
                         where CPR_GUID = DATA_PACKAGE-CPR_GUID.
            if sy-subrc = 0.
              select single CPR_BPARTN into (resource)
                         from /BIC/AZCPR_O0200
                         where CPR_ROLE = role_assignment
                         and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
                   if sy-subrc = 0.
                      DATA_PACKAGE-CPR_ROLE = role_assignment.
                      DATA_PACKAGE-/BIC/ZRESOURCE = resource.
                      modify DATA_PACKAGE.
                      commit work.
                   endif.
              endif.
           clear DATA_PACKAGE.
           endloop.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    $$ end of routine - insert your code only before this line         -
    Thanks,
    Venkat.

  • How to use more than one application server during initial load?

    Hi,
    we plan to use more than one application server in CRM during initial download in order to increase the number of parallel requests and to decrease the time for the initial load. Is there a way to allocate requests to more than one server? Is is possible via multiple rfc connections for consumer CRM in CRMRFCPAR?
    Thanks.
    Alexander Schiffer

    Hi Naresh,
    thanks for your answer. It has solved my problem. SMLG is the transaction that I was looking for.
    Two more OSS notes that helped me to guide our basis into the right direction:
    OSS 593058 - New RFC load balancing procedure
    OSS 1413986 - SMLG: Possibility to select a favorite type for Ext.RFCs
    Thanks again.
    Alexander Schiffer

  • Error in Loading FIGL data into a standard ODS

    Hi,
    I have encountered an error when i attempted to load FIGL data into a standard ODS. Below is the error i received:
    Error message during processing in BI
    Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
    System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Second step in the update
    Second step in the update
    Second step in the update
    Second step in the update
    Procedure
    Check the error message (pushbutton below the text).
    Select the message in the message dialog box, and look at the long text for further information.
    Follow the instructions in the message.
    Initially i discovered a work around wherein i loaded the data into a write optimize ODS. It was successful. However, when i attempted to data mart the data and put it into a standard ODS, the similar error occurred.
    Please help me with this problem.
    Ramon

    Hi,
    Hi,
    I will suggest you to check a few places where you can see the status
    1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
    Once you identify you can rectify the error.
    If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the new data table.
    Thanks,
    JituK

  • Sales document types during initial load

    Hi Gurus,
    Landscape - SAP R/3 4.6 c, CRM - 4.0
    We are starting the initial load for the Sales documents, item categories etc.
    For the same, for the document types in R/3, we have the same document type in CRM.
    Question 1- Do I need to configure the partner determination, incompletion log etc for the document type before the initial load or I can do it later once the data is in CRM.
    Question 2- Is it mandatory that for all the doc types in R/3, we have the respective document type in CRM? Logically yes, if yes, where can I find the mapping? For example for OR in R/3, there is a TA in CRM.
    Request someone to answer this ASAP.
    thanks
    Yash

    Hi Yash,
    I think the behavior is just use the same code
    of Transaction Type in CRM and Order Type in R/3.
    Since partner determiniation using different partner
    function codes in CRM and R/3, maintained or not in R/3,
    you may still need to maintain it again in CRM.
    For document, what you can do just create same document
    type (Transaction type) for R/3 and CRM. And depends upon
    you sceneario (in CRM there are several scenarios such as
    document created in CRM and transfered to R/3 Or download
    R/3 document into CRM - no transaction in CRM).
    Especially for partner, you may need to setup data
    transfer CRM to R/3 or R/3 to CRM in CRM configuration.
    And in R/3 you need to define it in tcode PIDE.
    Hope this helps.
    Cheers,
    Gun.

  • Replicating data once again to CRM after initial load fails for few records

    My question (to put it simply):
    We performed an initial load for customers and some records error out in CRM due to invalid data in R/3. How do we get the data into CRM after fixing the errors in R/3?
    Detailed information:
    This is a follow up question to the one posted here.
    Can we turn off email validation during BP replication ?
    We are doing an initial load of customers from R/3 to CRM, and those customers with invalid email address in R/3 error out and show up in SMW01 as having an invalid email address.
    If we decide to fix the email address errors on R/3, these customers should then be replicated to CRM automatically, right? (since the deltas for customers are already active) The delta replication takes place, but, then we get this error message "Business Partner with GUID 'XXXX...' does not exist".
    We ran the program ZREPAIR_CRMKUNNR provided by SAP to clear out any inconsistent data in the intermediate tables CRMKUNNR and CRM_BUT_CUSTNO, and then tried the delta load again. It still didn't seem to go through.
    Any ideas how to resolve this issue?
    Thanks in advance.
    Max

    Subramaniyan/Frederic,
    We already performed an initial load of customers from R/3 to CRM. We had 30,330 records in R/3 and 30,300 of them have come over to CRM in the initial load. The remaining 30 show BDOC errors due to invalid email address.
    I checked the delta load (R3AC4) and it is active for customers. Any changes I make for customers already in CRM come through successfully.  When I make changes to customers with an invalid email address, the delta gets triggered and data come through to CRM, and I get the BDOC error "BP with GUID XXX... does not exist"
    When I do a request load for that specific customer, it stays in "Wait" state forever in "Monitor Requests"
    No, the DIMA did not help Frederic. I did follow the same steps you had mentioned in the other thread, but it just doesn't seem to run. I am going to open an OSS message with SAP for it. I'll update the other thread.
    Thanks,
    Max

  • Initial load of custom table from r3

    Hello all,
    I am pretty much new to crm, with the documentation i had i was able to create a site for my r3 system in crm.
    Initially i created a z table in my r3 system and crm system. i loaded some data into r3 ztable. i just want to replicate the data into my crm system.
    If some one tell me if i need to create any custom function module to create adapter object in crm system. and also necessary steps from here on to perform the required task.
    Any doucment regardig could be sent to: [email protected]
    Thanks,
    Krishnam Raju.

    Hi,
      You need to perform a number of steps to result in the intial load of a z-R/3 table to a Z-CRM table. Here are some hints although I do not have a detailed document for this. May be you should try looking the CR 550 SAP course for <i>'Enhancing CRM middleware'</i> -
    1. Create a Bdoc structure and model a mBdoc using the Bdoc Modeller in CRM.
    2. Create a Adapter object in trx.
    R3AC1
    giving all details of the Bdoc type and tables used in source and destination systems.
    3.  You need to create an extract function module for extracting the data from Z-r/3 table. This needs to be part of crmsubtab mw table.
    4. You also need to create a mapping function module in CRM for mapping the data received from the R/3 plug-in to the mBdoc structure. Insert this in the appropriate tab of trx.
    R3AC1
    5. Create a validation module which validates the data before persisting into the CRM z-table. This should be part of MW table smw3bdocif.
    6. Once everything is in place, you can start the load using trx.
    R3AS
    . Monitor using
    SMW01
    7. Use the trx.
    SMQR
    to deregister the inbound queues and debug the CRM inbound. You can debug the R/3 outbound using
    SMQS
    Hope this helps. Reward if helpful.
    Regards,
    Sudipta.

  • Initial Load of DD* tables

    Hi everyone,
    Just a hopefully quick and simple question. We set up a SLT Replication Server recently and created our first SLT Configuration into HANA. We have no need for real time so we choose a scheduled time out of office hours. The configuration was successful however the DD* tables appeared in a scheduled state. From what I thought these tables should populate (load) initially regardless of the schedule. What appeared to happen was that they were waiting for the first schedule to run. Is this expected? Without these populating initially we could not choose any real ERP tables to replicate.
    We also tried with a non-SAP source (Oracle) and the DD* tables for that configuration were populated instantly even though that config was scheduled to run "off-peak" as well.
    Thanks,
    Marcus.

    Hi Marcus,
    As far as I understand your question, please find below my comments-
    (sap source system scenario)
    If the configuration is created with "schedule by time" option which I think is done in your case, then the  replication server would replicate database changes to target system at the time set by you. Here the metadata of tables would be copied from source system tables[DD002L and DD02T]
    yes, you are correct that ideally we should start with ERP tables replication after DD* tables are replicated successfully. This generally is faster but then depends upon the system.
    (non sap source system scenario)
    here the DD* tables are just initially loaded and not automatically replicated.
    So you would find a difference in how the replication takes place in both scenarios.
    Hope it answers to some extent for your query.
    Regards,
    Saritha K

Maybe you are looking for