Initial Load_R/3 to CRM_objects not in CRM

Hi Experts,
   After successful  initial load from R/3 to CRM, in R3AM1in CRM (Monitor Load objects) the status light turns to green but its yellow and is still in "running" state from the past 10 days. The object name is "DNL_CUST_SALES" and the report is "SMOF_MONITOR_SMOFDSTAT".
Please let me know what is to done for those objects to flow to CRM. Or how do i debugg
Thanks and Regards,
Prudhvi

Hi Prudhvi,
This kind of error is very common during one of the customizing objects initial load.
First cancel the object using the transaction R3AM1.
The object DNL_CUST_SALES transfers the following R/3 table entries into CRM. First one is R/3 table and the later is CRM table.
T171 = CRMV_DISTRICT_MD, TVLV = CRMV_USAGE, TVV1 = CRMV_CUSTGRP1,TVV2 = CRMV_CUSTGRP2, TVV3 = CRMV_CUSTGRP3, TVV4 = CRMV_CUSTGRP4 and TVV5 = CRMV_CUSTGRP5
Check the table entries in both the systems. If they are same then ignore the object. If not same run the object one more time
Reward if helps,
Thanks,
Paul Kondaveeti

Similar Messages

  • Error in Initial Load of Products from ECC to CRM

    Hi ,
        Im getting below errors In initial load of MATERIAL from ECC to CRM.
    <b>Data cannot be maintained for set type COMM_PR_MAT
    Data cannot be maintained for set type COMM_PR_UNIT
    Data cannot be maintained for set type COMM_PR_SHTEXT</b>
    <b>My Analysis is</b> 
      I found these set types are already assigned in other base category and around 100+ materials are created using this base category.
      After initial load of DNL_CUST_PROD1, i found these set types are not assigned to any of the categories of hierarchy R3PRODSTYP. Since R3PRODSTYP is not having above set types, my initial load is failing.
    <b>Required Solution</b>
      Is there any other way, I can download materials from ECC to CRM, with out deleting the existing materials and Z hierarchy created earlier from CRM.
    Regards,
    Prasad
    Message was edited by:
            SAP CRM

    Hi there,
    Try to attach the Set Types:
    "COMM_PR_MAT", "COMM_PR_UNIT", "COMM_PR_SHTEXT", COMM_PR_BATCH, COMM_PR_LGTEXT, COMM_PR_LGTEXT1,COMM_PR_LGTEXT2,
    to the Category "MAT_" and then run the Initial load again.
    It should work now unless you have some other issues.
    Best regards,
    Pankaj S.

  • Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

    Hi,
    I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.  I can access CRM with same user id and password from our office inside the network.  I can get
    the page to give login details once I have login details I got below error. Please help me to solve this issue.  It was working before.
    Access denied You do not have sufficient access rights or privileges to perform this action. 
    Regards,
    Noushad
    [email protected]

    On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
    Refer
    this on how to update host file.
    Regards, Saad

  • Notes on CRM Middleware and other

    I am after some notes on CRM. Please can someone kindly send me the notes on CRM Middleware (CRM500) and CRM Services (CRM700) and any other similar notes.
    My email is [email protected]
    Thanks in advance,
    Ruong

    Hi Amit,
    I appreciate if you could send me CRM middleware document to me as well @ [email protected]
    thanks,
    Amit

  • How can i implement sap note on crm

    can anyone please tell me how to apply sap note for CRM?

    HI Thomas,
    1. Releases: A note can be modified in case more changes can be included. In that case, a new 'release' of the note will be created. In snote, you can also find the function 'downlaod the latest version'. This means snote will check the current release in OSS can download it.
    2. Reference support pacakge: This is the support pcakge where the change in this OSS note is included. Any SP level equal or higher than that will make the note 'can not be implemented';
    3. Correction Instructions: One note can have one or multiple correction instruction. Usualy they're for different releases (620, 640, 700 etc.). But sometimes the CIs are for the same release and they will be implemented into the system sequentially when the note is being implemented.
    Normally, when you try to implement a note in SNOTE, go to the note browser, the note then has the 'implementation status'. ' can be implemented' means the note have the valid support pcakge level. 'cannot be implmented' means the note is already included the the support packages. "Not relevant' means the note changes a component which doesn't exist in the system.
    Regards,
    Satish Mathala

  • Initial Load of Business Partner not running

    Dear SAP CRM gurus,
    We have been able to perform initial download of Business Partners from ECC into our CRM system. We have done this many times. We do not know what is wrong, but since last week, we are unable to perform initial download of our Business Partners. When we run initial download using R3AS, there is no BDoc created, there is also no queues on inbound/outbound of both CRM and ECC system. There is also no error. R3AM1 showing initial download complete but only with 1 block. But there is no BDoc created!! All other replication objects are fine, except that BUPA_MAIN we are unable to perform initial download. Delta download is fine as well.
    We have not changed anything on SMOEAC and it is all correct. Entries on CRMSUBTAB and CRMC_BUT_CALL_FU is also correct.
    Please help!!

    Hi,
    When you are downloading CUSTOMER_MAIN through R3AS are u getting any warning or error??
    or r u getting pop up with green light??
    If u are getting any warning or error then go to tcode: smwp. Then go to runtime information
    ->Adapter Status Information>Initial Load Status
    under that check running objects and check customer_main is there or not??
    if found delete that entry and do initial load again.
    Also check outbound queue of R/3 and inbound queue of CRM .
    If then also its not working do request download using r3ar2, r3ar3 and r3ar4 and check whether it is working or not.
    If helpful kindly reward me.
    Thanks & Regards,
    Anirban

  • Initial Load of contract from ISU to CRM

    Hi All,
    We are working on the replication of contract from ISU to CRM.
    We have done all the necessary setting,like assigning default product,running ecrm_generate_everh report etc
    When we are running initial load on SI_CONTRACT,only single BDOC is getting generated which is error free but still it contains no data.
    Since its without an error ,we are not able to figure out whats the error is.
    Regards
    Nikhil

    Hello Nikhill,
    Could you resolve the problem?? I've a similar error, the BDoc is empty. The table everh is filed but the fields contractpos and contarcthead have value '0000000000000000' i think that is the problem. ANd the recport ECRM_CHECK_EVERH say that are misiing contracts.
    Could you help me please!!!
    Thnks!!

  • Initial settings to create client proxy on CRM in SE80

    Hi Experts,
    I tried to create a client proxy on the CRM system for a web service URL (where the WSDL exists), in the transaction SE80.
    When I tried creating this, the proxy creation halted at a point, stating that the HTTP not found. When I checked the info, it stated that the initial settings in the transaction SICF must be done.
    Please let me know what are all the settings that needs to be done in this regard.
    TIA. Points shall be awarded.
    Regards,
    Kris.

    I worked with my basis team, seems it is not because of internet proxy or firewall issue, might be a bug with abap proxy generation program.
    I tested with wsdl referencing to local xsd, and seems it worked fine, unfortunately, my xsd files are in a complicated structure, at this point my only option probably is to download all xsd files to local and modify them.
    thanks for all help.

  • Internet exlorer 7.0 can not display crm portal content

    hi gurus,
    we are using crm5.0+ep7.0, we have loaded the portal content (business packages) for crm and crm high tech. the patch level is: 13 level 0 (BBPCRM is 6).
    I use portal role channel manager. when we want to display some crm content in portal which runs by explorer 7.0, sap will popup another window and turn into blank with error. the ie error says: object doesn't support this property or method. and the url:http://crmdev.iecsh.com:8000/sap(ZT1PQnhTbWh6Ym01Y0R3M0JqKnQ2R1VRLS10MDlLNjhsU1Z6XzdLTmUqc2RFUjFnLS0=)/bc/bsp/sap/crm_bsp_frame/mainDH.do
    while the original window is just continuing displaying the signal: loading.
    with ie 6.0, it's ok.
    can anyone help me out? thank you very mcuh.

    Microsoft Internet Explorer 7 as mentioned in SAP Note 981710 this version is not supported by any current NetWeaver Portal / WebAS / ITS / BSP / BEX / CRM Web Application Component......
    SAP Strongly recommend to our customers to block this update until this version
    This version (IE 7.0) "should be" supported as of SPS19 (NW '04) or SPS10(NW 2004s) and there exist several errors found in the operation on previous releases.
    be supported or the SPS be released (this is mentioned on the note), please note that once the system has performed the update there is not possible to go back to IE 6.0
    For further information please refer to:
    http://www.microsoft.com/technet/updatemanagement/windowsupdate/ie7announcement.mspx
    http://service.sap.com/sap/support/notes/981710

  • Outlook 2013 in a 2012 r2 Terminal Server environment and crashes after initial setup. It will not launch in safe mode

    I am running terminal server 2012 R2 (RDS environment) In Windows Domain, 8 users across a LAN on a new server.  Outlook 2013 crashes and will not load in safe mode. Outlook allows the initial profile setup and when the configuration is complete, it
    crashes and will not launch or launch in safe mode. I have deleted the outlook profile and reconfigured it.  The problem continues on all user accounts. The firm is not using Exchange and  is using a POP3 account. I have a 13 user Office Volume License
    (per device) and 15 terminal server Licenses ( per user)
    Problem Event Name :      APPCRASH
    Application Name:            Outlook.EXE
    Application Timestamp :   52b0b282
    Fault Module Name :        OUTLOOK.EXE
    Fault Module Version :     15.0.4569.1503
    Fault Module Timestamp:  52b0b282
    Exception Code:                 C0000005
    Exception Offset:                00340b9
    OS Version:                      6.3.9600.2.0.0.16.7
    Local ID :                         1033 
      Any help would be much appreciated.

    follow this instruction to troubleshoot Outlook crash issue:
    http://support.microsoft.com/kb/2652320
    Flynn

  • Survey not found(CRM QUESTIONNAIRE)

    we have added a questionnaire in CRM. it works fine in SAP GUI.But when i try to see it in PCUI screen it says the survey is not assigned to a object.Can anyone suggest the possible causes.

    Hello Praveen,
    you can lookup my E-Mail ID via my SDN Business card. But please provide us the Application name of the PC-UI Application. You can identify the Application when you set the User Parameter CRM_BSP_TRACELEVEL = 2222 and then start the application again.
    Regards
    Gregor

  • Edit notes in CRM

    Hi,
    I have a requirement in which I have to change the notes added to the case notes section and interaction record (texts section).
    There is no option to change the previously entered notes when we try in change mode in CRM.
    Note: we are using CRM 5.0
    Can someone please help in how to do it?
    Thanks and Regards,
    Mohit

    Hello,
    You may not be able to change previous notes because the corresponding text is of type "logged", which means each time you enter something, it is logged in another text type (usually called "log") in which you can see who wrote what and when.
    To change this behavior go to the following IMG:
    SPRO >> CRM >> Basic functions >> Text management >> Define text determination procedure.
    Select you text profile (object type is CRM_ORDERH for interaction record)
    Select the text type you would like to be able to edit.
    Set "changes" from "P-Log" to " -Edit".
    Kind regards,
    Nicolas Busson.

  • Problem - Custom Page Call Working via APPS login and not using CRM login

    I have created a custom link in the Oracle Portal order page. The call (click) works correctly when I login using a regular apps login and choose ORDER STATUS , but if I login directly to CRM and then access the same page via clicking on ORDER PORTAL image, the link doesn't work --> it seems to get translated to something I am not familiar with. I have illustrated the problem below, and am trying to figure out what to do to make the CRM login environment work as well.
    Thanks.
    Channeld
    Code modification to the CO -->
    String dest_url = "OA.jsp?OAFunc=XXX_ONT_FUNC_129&Header_ID_p="+Header_ID;
    OAUrl oaurl = new OAUrl(dest_url);
    dest_url = oaurl.createURL(pageContext);
    osb.setDestination(dest_url);
    --> what the link shows in on the order page using both logins
    http://pl1ua121.corio.com:8000/OA_HTML/OA.jsp?OAFunc=XXX_ONT_FUNC_129&Header_ID_p=11261&_ti=1811750263&oapc=5&oas=grPSiOwvEyLuXdxKt_a5GA..
    --> what the link gets translated to once clicked within a CRM login session; note, during a regular apps login,
    the link does not get translated.
    http://pl1ua121.corio.com:8000/OA_HTML/RF.jsp?function_id=27070&resp_id=50661&resp_appl_id=672&security_group_id=0&params=08V2jKe4UMpLbUVYUjsT8ZCABTTWpQnO7QdLdJyREFbPg8IIF5.vbStfOY8IYonLVX-dbml9UlrBKO.-rfzhVC2iib.jk6vv-9lnvaN2g5jHG7dKBUwLdgDx0woWFYmOIGTJJxkjHrHfmNMIqDTmxzD8K-jXUU8Vqja8Ajn98ZYtdz6iVvq.yKvS3fbGlxu7vsBw20gV7Yp8gAp9Ps90OUg.5HJh9CD8FhYpiJp4ffQ

    Hi,
    Thanks for the update.
    Sir its not about calling the JSP Page from OAF page.
    My requirement is what I have explained above.
    Please suggest its urgent.
    Thanks,
    Raja Dutta

  • Loading of Data from Lotus notes to CRM

    Hai guys,
    I need to upload the Prospects data and also the activites which we created with the prospects from the Lotus notes to the CRM
    We have two lotus notes suppose X,Y from which we need to load the data. There might be some records which might be present in both X,Y.We dont want to duplicate the records.
    Also we have defined Marketing Attributes X,Y.So now when we are uploading the prospects from X lotus notes all the prospects from the X lotus notes should have X in the Marketing Attribute.Same way as the prospects from Y
    I dont have any previous experience loading the data to CRM.
    So if you guys have any experience/clues/suggestions can you please share your knowledge.
    Thanks in Advance
    RGDS

    Hello Taylor,
    the Lotus integration tools provide the ability to read and write data from Lotus Notes/Domino to SAP and vice versa. Workflow is a special use case. The tools bascially read and write arbitrary data.
    Even though I didn't experience CRM myself I still think that they may be suitable.
    Feel free to contact me directly so that I can provide the contact persons to you.
    Regards
    Michael

  • HP Officejet Pro 8500A: Initial Checking Printer Procedure does not stop

    I have a big problem.
    My printer does not stop to run the "Checking Printer" procedure.
    It tells me: "Open the print-carriage access door, clear the jam, and then touch OK to continue.
    Unfortunately there is no paper inside.
    Pressing OK, the printer continues the procedure and it NEVER stops.
    Switching OFF and ON the power does not help.
    But if you try to print the Auto Test Report it works. The printer prints the report without any problem!!!
    PLEASE HELP ME
    Andrea

    Hi there andrea_lugano,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for