Initial load via usb, then switch to match

I have a iphone6 with 128g, and figured i can now eventually load most of my music on the phone. i know how to do this, no problem. i would however, like to switch to itunes match on my phone for future updates.
i am frequently on the road and i don't want to use my bandwidth to download songs that i can initially much easier and faster load directly from my mac at home.
i found an article that said, i should load via classic sync and then switch itunes match on, but this did just reset the content on my phone.
any idea how to do this, anything official from apple on this? i can't imagine to be the only one who has a lot of songs and changes his phone once a year ...

What do the target tables look like in terms of having the same data as the source?

Similar Messages

  • Ipad 1 suddenly does not appear in iTunes and down not load via usb

    All of a sudden my ipad1 is not recognised by itunes.
    Also no loading activity via usb.
    I use Imac with lion.
    My ipad3 runs prefectly.

    Try something very simple .... quit iTunes, reboot the iPad and then restart the Mac and try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • GRC-IDM initial load job not enriching one system's privs

    Hi GRC Experts,
    We have integrated IDM 7.1 and GRC 5.3 and tested provisioning to one target system in DEV; this worked perfectly; when testing a similar configuration in Quality, we were setting up the system, and had to run the IDM-GRC Initial Load job in order to enrich the imported privileges for use with GRC AC 5.3; in the Quality system, instead of just connecting to 1 target system, we have connected to 5 ABAP systemes, ECC, PI, POSDM, BW & SRM; for some strange reason when performing the GRC-IDM Initial load job 4 of the target system's privileges get enriched, while the ECC system's privileges aren't getting enriched; I would say through random sampling all ECC profiles are getting enriched but none of the ECC privileges are getting enriched; why could this be happening? we've tried running the ECC Initial Load job  and then the GRC-IDM initial load job about 8-10 times but with no luck; the set of privileges we're investigating are still not enriched; we also ran the GRC CUP role load job, also selecting the option to over-write all existing roles in the system; via this method the CUP roles have been refreshed twice so far, but running the GRC-IDM initial load job even after refreshing the ECC system's privileges in CUP has had no effect whatsoever, all ECC privileges are still left to be enriched, but strangely enough the ECC Profiles have been enriched.
    Any clues as to why this could be happening? We've checked and re-checked and there is no filtering or delta being applied to any of the passes, so it really makes no sense. Is there something we should be doing apart from what we've already done? Would greatly appreciate your help with this!
    Thanks a lot in advance!
    Best regards,
    Sandeep

    What you could do is simply add the attributes by a background job to the privileges. This works fine in most cases. You need to be sure that GRC knows the role and then it is fine. The load only adds those 2 privileges and does nothing of any deeper complexity.
    MX_AC_ROLEID = <rolename>
    MX_APPLICATION_ID = <system name>

  • HT201210 on my iPad I get an image of the USB connection and an arrow pointing to the itunes icon for a few seconds then it switches off.  connected  to itunes via USB get a message that itunes has detected an ipad in recovery mode must restore when i do

    When I havent got my ipad connected to a power supply I get an image on my ipad of the usb cable with an arrow pointing to a itunes icon and no matter what you try and do iyt stays on that for a few seconds and then switches off the ipad, connecting it through usb into itunes on my PC (XP) this image says on the screen but I get a message on itunes saying itunes has detected an ipad in recovery mode and mneeds to be restored - when I fire off the restore through itunes after a few minutes it comes back and says it cannot restore and give an error message 1603.  I have also repeated the process through my wife's laptop (Vista) and get the same situation -it is an 32GB Ipad 3 purchased last November -  any ideas ?

    Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Initial load of small target tables via flashback query?

    A simple question.
    Scenario: I’m currently building a near real time warehouse, streaming some basic facts and dimension tables between two databases. I’m considering building a simple package to "reset" or reinitialize the dimensions an all-round fix for variety of problem scenarios (since they are really small, like 15 000 rows each). The first time I loaded the target tables I utilized data pump with good success, however since streams transforms data on the way a complete reload is somewhat more complex.
    Considered solution: Ill just write a nice flashback query via db-link fetching data from a specific (recent) SCN and then I reinitialize the table on that SCN in streams...
    Is this a good idea? Or is there something obvious like a green and yellow elephant in the gift shop that I overlooked? Why I’m at all worried is because in the manuals this solution is not mention among the supported ways to do the initial load of a target table and I’m thinking there is a reason for this?

    I have a series of streams with some tranformations feeding rather small dimensional tables, I want to make this solution easy to manage even when operations encounter difficult replication issues, so Im developing a PL/SQL package that will:
    1) Stop all streams
    2) Clear all errors
    3) Truncate target tables
    4) Reload them including transformation (using a SELECT AS OF "ANY RECENT SCN" from target to source over dblink)
    5) Using this random recent SCN I will re-instantiate the tables
    6) Start all streams
    As you see datapump even if it works is rather difficult to utilize when you tranform data from A to B, using AS OF I not only get a constant snapshot from the source, I also get the exact SCN for it.
    What do you think? Can I safely use SELECT AS OF SCN instead of datapump with SCN and still get a consisten sollution?
    For the bigger FACT tables im thinking about using the same SELECT AS OF SCN but there with particular recent paritions as targets only and thus not having to reload the whole table.
    Anyways this package would ensure operations that they can recover from any kind of disaster or incomplete recovery on both source and target databases, and just re-instantiate the warehouse within minutes.

  • When I start-up my computer it has a Flashing ? in a Folder. I removed the HDD as then plugged it in via USB and it worked, but just won't work with it inside the Macbook.

    So, I just had a bit of a hurried train journey, two connections very close together, resulting in my laptop bouncing around a bit inside my bag (in a case). The Macbook was shutdown the entire time, but when I tried to start it up it came up with a flashing folder with a "?" in the middle of it after the start-up "bong".
    I proceeded to remove the hard drive to check if it was okay, and it worked fine via USB into my iMac, so I am now running my Macbook Pro from a hard-drive that is completely naked outside of its shell.
    What could have gone wrong other than the hard drive, bairng in mind that it is all working perfectly well with the hard-drive plugged in via USB. I was thinking it could be the ribbon cable that connects the hard-drive internally, however I had this replaced not long ago after a previous complete hard-drive failure, but that's a story for another time.
    If anyone could help I'd be very appreciative, as my macbook looks ghetto as all **** right now, as I have the hard-drive sellotaped to the left of my trackpad.

    If Apple was the one that replaced the ribbon cable, return it. If not, run AHT (Apple Hardware Test).
    Using Apple Hardware Test to troubleshoot a hardware problem
    Your issues might be caused by a hardware problem. Running Apple Hardware Test can help you solve this problem by showing you the faulty hardware.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold the D key on the keyboard before the grey starting screen appears.
    Continue to hold the D key until the loading screen shows up. You should see a globe.
    When AHT has loaded, select your Language and then press the Return (↩) key.
    Select the Perform Extended Testing checkbox located under the Test button.
    Press the T key, select the Test button, or press the Return (↩) key to start running the diagnostics.
    Report any issues it shows in a reply.
    I hope I helped.

  • Daisy chain two external drives via Firewire, then connect one via USB to the TC?

    Hi,
    I have two external drives that have both Firewire and USB ports. My 1st generation 500 gb Time Capsule (maybe all of them?) only has USB ports so up til now, I have connected one or the other drive via USB. (I've tried to connect both to a powered USB hub but one drive has problems showing up. At this point I only use the one drive that shows up and connect it directly with no hub to the Time Capsue.)
    My question is: Can I daisy chain the two drives via Firewire and then connect one of them (probably the one that has no problems connecting with USB) to the Time Capsule via USB?
    Second, somewhat-related problem...
    I don't know why one drive isn't connecting very well when directly connected to the Time Capsule. Both are Fantom drives. One is a 1TB, the one that has prblems connecting is a 250GB. I've tried connecting directly or through a powered hub. The 1B has no problems, the 250 gb won't show up most of the time and disconnects itself fairly quickly if it does connect. I've switched cables; that hasn't helped. The 1TB stays connected most of the time but sometimes it disconnects too. I suspect the Time Capsule just isn't able to deal with external drives so I don't puch it. It would be nice to be able to have both drives accessable through the TC though.
    Thanks for any help.
    Cheers,
    John

    Doing some experimentation, connecting the drives directly to the MBP:
    - Neither of the two drives Firewire daisy-chained and going through the powered USB hub connected to the MBP mount. I was using old aliases on desktop.*They don't show up on network otherwise. (Each drive self-mounts with both Firewire and USB direct connections.)
    *Even after making new aliases, neither drive will mount using their new aliases when directly connected (not through hub) with USB or Firewire (and Thunderbolt adapter.) That's weird.
    - Both the 240 gb and the 1TB drives going through powered hub connected to MBP mount by themselves.
    - Two drives daisy-chained via Firewire and one drive connected to the MBP via Firewire (and Thunderbolt adapter) self-mount. No surprise there but that doesn't help me as I want to have the drives further away from the MBP and connected to the Time Capsule, which doesn't have a Firewire port anyway...
    - All of the USB and the Firewire cables work as does the Thunderbolt adapter. I tested them.
    I wonder.... I have a Firewire to what appears to be an Ethernet connector. I wonder if that would be any good. I'm afraid to try it though...

  • In which table the initial balances will be stored when loading via api

    Hi all,
    I am doing initial balances migration...
    In which table the initial balances will be stored when loading though an api.. (pay_balance_upload.process).
    First I have loaded data in to pay_balance_batch_headers and pay_balance_batch_lines tables..
    Then called the api pay_balance_upload.process. and the data was reflecting correctly in front end.
    But we need to reconcile the loaded data.. for that, can anyone please tell me in which the loaded balances would be stored..
    I have identified two tables, pay_assignment_latest_balances
    and pay_latest_balances
    when I try to create a balance from frontend I can see the data in pay_latest_balances table..
    But when I load via api I am not able to find it in any of these tables..
    In addition to that can anyone please tell me when the data will be populated in pay_assignment_latest_balances and pay_latest_balances tables.
    Awaiting for your help and quick response..
    Thanks and Regards
    Kishore

    You have followed the correct process..As Vignesh said, you can use pay_balance_pkg.get_value to make sure you have the correct values uploaded but otherwise if you are able to see the values in the front end I wouldn't worry about the latest balances tables. These tables, as the name indicate, hold only the latest values and if a payroll (ran post the initial balance upload) has been rolled back, these are deleted since they are no longer available.
    You can refer the below Metalink notes for a detailed explanation:
    The Secret Life of Initial Balance Upload with Screenshots Example [ID 60057.1]

  • My black Nano: discharges and then won't charge via USB

    (I'm going to cross post this as I mistakenly replied to a thread in the first gen. nano forum)
    (december 25 2006)
    Took a new 8gb black nano out of the box this morning and it looks dead in the water. When it's plugged into my macbook pro via USB, it makes a very faint rapid clicking sound. Nothing comes up on the screen. Attempts to get a spark of life from other computers (iBook, G5 iMac) were fruitless.
    Charging, letting it sit, attempts at resetting.. nothing has had any effect.
    We'll be bringing it back to an apple store tomorrow morning.
    (december 27 2006)
    Ok, a little update. My dad brought the nano down to the apple store (two hours away - he was going to be in the area for work) and purportedly they hooked it up to a wall charger and it fired right up. Started charging and worked. They handed it back to him and he came back home.
    When he got home, we tried to power it on: no luck. Reset sequence: no luck. Plugged it into the USB cable: nothing. Tried it on other macs in the house with the same cable: nothing. Finally had the bright idea to try the firewire cable from my sister's older iPod. Wham! Charging, but the nano doesn't support data over firewire. So we let it charge for a little and then plugged it back into my MBP with the USB; now there was both charging and data action. It got all charged up and loaded with music.
    Today it came off the USB cable, fully charged, and was used intermittently during the day. I was watching the battery indicator; it seemed to be going down rather quickly. In the afternoon I charged it back to full again and went for a run with the nike+ kit (totally awesome, by the way)
    By the end of the run (40 minutes) it was in the red. I plugged it in for a few minutes to sync, and then disconnected it and left it alone.
    7 hours later, it's bedtime - and the nano is unresponsive again. Totally dead. No power. Doesn't charge.
    I just found the firewire cable and plugged the nano into my MBP using that - charging! It's alive. I'm just going to let it charge all night. We'll see what happens tomorrow after a run in the morning.

    There was a power change for Nanos a couple of versions back from Firewire to USB. This means that some car adapters and wall adapters will work with older iPods, but not newer ones.
    i

  • Loading data of last three years via initial load

    Hi All,
    We are having one requirement. We have to load data of last three years from source to target via initial load.
    most of the table(s) are not having timestamp column.
    Please suggest some process to get this done.
    Thanks
    Kamlesh

    This question doesn't seem to have anything to do with GoldenGate, does it? Assuming the source & target are both the same DB vendor (ie, both Oracle), then there is no reason to use GG for the initial load. (But trying to figure out how to get the last 3 years data without timestamps will be an interesting challenge, in any case. Not sure which forum is best to answer that question.)

  • Time Capsule, MFP, and scanning via USB switch

    Has anyone tried to share a multi-function printer between Time Capsule and an iMac using a USB switch?
    The TC and the printer work fine together for wireless printing, but I'd like to be able to use the MFP's scanner with my desktop without swapping the USB connection each time. Has anyone gotten such a setup to work, and if so can you recommend a particular USB switch?
    I would connect the iMac to the printer by USB via one branch of the switch, while the other branch would connect the TC to the printer for wireless printing.
    I know that another solution would be to connect the iMac to the printer and share the printer using OS X's printer sharing feature, but I'd like to avoid forcing the iMac to remain on in order to print.
    Hardware: Canon Pixma MP830, iMac (2.7 GHz Core i5, running Lion), Time Capsule (4th Gen., 2TB)
    Thanks in advance for any advice.

    Please explain exactly what you mean by "plugging the NAS into the ethernet port on the imac and the TC via USB".  I can't picture how you have things connected.
    I'd plug the NAS and your iMac into Ethernet ports on the Time Capsule.  If you want to assure that you're copying over Ethernet, then turn off AirPort on the iMac.

  • TS2776 iPhone 5, Outlook 2013, Windows 7.0 64-bit.  Every time I connect my phone to my computer via USB, iTunes opens with the "accept our terms and service" then deselects the boxes checked under the INFO tab to sync my calendars, contacts...help?

    I am connecting my iPhone 5 to my Windows computer via USB.  This should open iTunes and start the sync process.  Instead of iTunes opening, I get the iTunes service agreement to which I must agree.  Then iTunes opens and begins to back up my phone.  It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected.  Hence the computer and the phone are not sharing information.  When I select the functions I want to sync, I must either replace or merge.  If I replace, I lose the information I recently put into my phone.  If I choose to merge, then I have duplicates of everything.
    How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
    I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
    Thanks for any help!
    Christine

    After you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
    java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
    I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
    I've found that this fails with the error;
    INFO: This tool works only on Windows Platform. Exiting the program
    Which is strange considering this is Windows Server 2008 R2 64-bit
    DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue

  • My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

    My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB.  I get an error on my PC stating that device attached to USB port is not recognizable.  Can anyone help?

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694

  • I'm running iTunes Radio on a WinXP PC with a KVM USB switch. With the latest iTunes update, iTunes Radio will no longer continue to stream when I switch to my work PC via the KVM switch. Can this be fixed?

    I use a WinXP machine as a dedicated Music PC. I also have a separate "newer" PC to do work on. Each machine shares a Monitor, keyboard, and mouse through a KVM USB switch. I like to stream iTunes radio by starting iTunes on a selected station, then 'switch' to my work PC so that the Music PC will stream iTunes like a radio station through my Audio sound system. This used to work fine up until the latest update to iTunes. Now, when the Music PC detects the KVM switching to the other PC (basically a system hardware disconnect detection), iTunes will stop. Can I turn this 'hardward detection' issue off in iTunes?

    Check your  i tunes version on the PC.  you need the most recent version. 
    Other potentials -
    try a different usb port,
    try a different cable.

  • I have an iMac that won't boot up.  I've read all posts on this subject to no avail.  When power is switched on, it chimes, Apple logo appears, spinning wheel, then loading bar starts to fill.  It gets to about 25% then switches off! Help please!

    iMac that won't boot up!   When power is switched on it chimes, Apple logo appears, then loading bar, then spinning wheel.  Bar seems to load up and gets to around 25%, then reverts to the start again, gets to about 20% on the bar and then switches itself off leaving a black screen.  Tried all the remedies on internet with no avail so would welcome some advice other than binning what is a relatively new computer.  Earliest appointment Apple could offer was Thursday 17th, really useful for a business user _ not impressed,

    You've probably tried this, but will it Safe Boot? Restart holding down the Shift key until you see the grey progress bar. You'll need to input your admin password during bootup. If it will boot you can then try to eject the disk using the various suggestions here that you haven't tried already:
    http://osxdaily.com/2009/08/28/eject-a-stuck-disk-from-your-mac-dvd-super-drive/
    Or this (not tried this myself, but if things are desperate): http://www.youtube.com/watch?v=n7NYW9Dr448

Maybe you are looking for