Initial password for SAP* in SAP NetWeaver 2004s ABAP Edition
Hello,
I have just installed the SAP NetWeaver 2004s ABAP Edition on my PC and I want to setup some new clients to simulate an ALE model.
Does anyone know the initial password for SAP* ?
I have already tried PASS and pass because I know it is case -sensitive now but it did not work.
Thanks a lot.
Wim Van den Wyngaert
Hi,
initial SAP* password is 06071992
DDIC is 19920706
Similar Messages
-
SAP NetWeaver 2004 abap edition license help
Hi all.
Im install new license into system and press enter.
System message error.
TIME LIMIT EXCCEDED 300....
Please help me remove this problem....When you do something in a freshly installed system, a lot of stuff is generated (=compiled) when the functionality is needed the first time.
On smaller hardware this can take longer than predefined time outs (which are usually defined for the common later case when everything has already been compiled in the system).
Just try it again, maybe even several times.
Dirk -
Install License Key for SAP NetWeaver 2004s ABAP trial Edition.
Hello.
I have two installations of the SAP NetWeaver 2004s ABAP trial Edition (on desktop and laptop). After the expiration of the original 30 days license; now I need to install the extended License (90 days). I am using SLICESE transaction from SAP* user account to install the new license. I have got the "License Key" from SAP website. However, <b>the installation of the new License Key fails to complete successfully</b> (it fails to add the new license key) and ends with an error prompt. This problem is happening on both systems! <b>Has anyone experienced such problem?</b> What did you do to fix it?
Note: no errors in typing in the new Key, as I used the copy and paste!
Thank you very much for your help.
HameedRich,
Thanks again for your help. I found out that if you try to install the new license key (first time) with any error (such as wrong expiration date), it will fail as "invalid key", naturally. However, the subsequent attempts also continues to fail despite the fact that the correction are made. the only way I could fix this was to stop and restart the SAP Application server and make sure that the first attempt has typos. <b>It seems to me that once an error flag is set, it is not removed unless the server is restarted.</b> well, the problem is fixed now and thank you for your help.
Hameed -
SAP NetWeaver 2004s ABAP Trial Version - error code = 200
Hi all,
installation of SAP NetWeaver 2004s ABAP Trial Version
which was attached to the book ABAP-Objects ends again and again with
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
Attached you find information about
1) Host-file
2) Network connections
4) Error - Log
It seems that the [# [#]
echo 7/tcp
echo 7/udp
discard
9/tcp sink null
discard 9/udp sink null
systat 11/tcp users
#Active users
systat 11/tcp users #Active users
daytime 13/tcp
daytime
13/udp
qotd 17/tcp quote #Quote of the day
qotd 17/udp quote
#Quote of the day
chargen 19/tcp ttytst source #Character generator
chargen
4) == E R R OR L O G ================================================
(Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
an error occurred and product installation failed. Look at the log file D:SAPNSPlog.txt for details.
(Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Jan 1, 2007 1:12:17 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err,
An error occurred and product uninstallation failed. Look at the log file D:SAPNSPlog.txt for details.
(Jan 1, 2007 1:12:17 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source
== Remark to threads ========================
Thread a)
"I found it is very useful to have a clean system" => not applicable to me
Thread b)
deals with removing relics of previous installations => hints considered but error still appears
Thread c)
not applicable to meHi all
I've read your entrys.
Saw that the solution is missing.
It can be found in the manuals:
1. Download the "Registry Clean Tool for SAP NetWeaver 2004s ABAP" and use it.
2. Download the latest Version of "SAP NetWeaver 2004s ABAP" and un-rar it.
3. Install the "Microsoft Loopback Adapter" an activate it.
4. Retry to install.
Summary:
So the error 200 was caused for the first time from trying an installation without a Loopback Adapter, and after that from trying to re-install without cleaning the registry.
Now its working fine.
Thomas -
GUI error on SE80 in SAP NetWeaver 2004s ABAP trial Edition
I have SAP NetWeaver 2004s ABAP trial Edition installed on WinXP. one problem is that when I run T-code SE80 (Object Navigator) the middle section of the left part of the screen (where it would normally allows you to select object type for display) is not painted. it is just a block of white space! Other parts of the screen seems to work fine (both Top and Bottom sections). Has anyone had such problem? What can I do to fix it? Thank you for your help
HameedPatch level 22 is available at service market place, this is the link
Service Market Place -> Support Packages and Patches -> SAP Frontend Components -> SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 6.40 -> Win32 -> gui640_pdb_22-10001615.exe
https://smpdl.sap-ag.de/~swdc/012002523100007929292006D/gui640_pdb_22-10001615.exe?_ACTION=DL_DIRECT
You need the Service Market Place Id for that.
However, this file did not help!
Hameed -
Error during installation of SAP NetWeaver 2004s Abap Trial Version
The following error occurred during installation of SAP NetWeaver 2004s ABAP Trial Version:
ERROR 2008-03-13 09:47:27
FSL-00001 System call failed. Error 53 (Network path not found.) in execution of system call 'CreateFile' with parameter (
127.0.0.1\sapmnt\trans\bin\DOMAIN.CFG, GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, CREATE_NEW, FILE_ATTRIBUTE_NORMAL, NULL), line (763) in file (synxcpath.cpp).
This error occurred at the end of the installation.
Any idea?
Thank's, Thiago.>
Thiago Amaral wrote:
> Ps: I already restarted my notebook.
That does not automatically start your instance. Have a look at the shortcuts SAP installed in your startmenu. There's both a startscript and a stopscript. -
How to use BI in netweaver 2004(trial edition for abap)?
I am new in BI field. I downloaded the netweaver 2004(trial edition for abap)and installed it on my laptop. But the system said I am not authorized to use BI function:(
how can I use it, thank youHi Phani,
You can test your TREX server by executing the following step:
Log on to your TREX server and open up the TREX console which you can find in the TREX program folder. Normally you are now inside the python_support folder.
Execute the following script by typing: "python runInstallationText.py" and hit Enter.
The script carries out the following tests:
● Deleting any test indexes that were generated for a previous script run
● Creating a test index
● Indexing documents
● Testing search functions
● Exact, error-tolerant (fuzzy), and linguistic searches
● Search using Boolean operators such as AND and OR
The results are displayed at the end of the script run. You see the tested calls and their statuses (OK or Failed).
When you run the script for the first time, the call Delete Index has the status Failed. This is because there was no existing text index to be deleted. If this is the only cell with the status Failed, the test was successful.
Below you will see the final output generated by the test script. As stated near the bottom of this screenshot our TREX is running very well or not if there is a problem.
Best regards,
Tom.
PS. Don't forget to reward helpfull answers -
GRC 10: Initial password for multiple users creation in a ARQ request???
Hi All,
I was trying to create a request in ARQ for multiple users. I noticed that, I could add all the necessary required information for multiple users using the template. I added the roles as well. However, I could not set the initial password for multiple users as the tab "User System Details" (where the initial password is provided for a single user) is disabled!!!
The users were successfully created in the R/3 system. However, due to non-availability of initial password, these users could not log into the R/3 system.
May I know how to set the initial password for multiple users?
Regards,
faisalVit,
I was trying to test this multiple user creation scenario. But I am surprise to get a template where in I have only below mentioned fields:
1. User Name
2. User Id
3. Email
I filled these details and uploaded. Then filled the "User Access" details. While submitting the request, I got the error:
"Last name is not mentioned for user id XXX"
But there is not such column in provided template by GRC!
I added 2 columns: First Name and Last Name and saved it and uploaded again. These details are not picked up!
Following are the only columns shown:
1. User Name
2. User Id
3. Email
4. Manager
Out of above, only "Manager" field is editable and others are disabled.
Last time I remember, I has got complete template with all the columns. Unfortunately, I have deleted it and not available with me now.
Any idea you have why am I getting such incomplete template?
Regards,
faisal -
DB Connection failed in Netweaver 2004s ABAP
When I try to start Netweaver 2004s ABAP, I am getting error message as "DB Connection failed". I have used the system for two days and executed transaction 'sgen'. Now the disp+work is getting started and stopped immediately. Please give me a solution to rectify the error.
with love and prayers,
siby syriac<i>Is there a way to set the new ABAP editor for BSP?</i>
i assume that you mean the ABAP code in the event handlers in BSP.
i am using SAP GUI patch level 15 and for activating new ABAP editor from SE80 use the following menu path
utilities->ABAP editor-> editor
choose front-end editor (new) tadio button.
Regards
Raja -
Unable to install the netweaver 2004 slim edition
Hi,
i am new to the netweaver. i am trying to instal the netweaver 2004 slim edition.
my system config:-
OS: windowsXp
jdk version is jdk1.5.0
ram 1GB
i am getting the below error.
please help me---
i need the jdk1.5.0 only
CJSlibModule::writeWarning_impl()
Execution of the command "E:\Program Files\Java\jdk1.5.0_03\bin\java.exe -classpath ./sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;e:\sapdb\programs\runtime\jar\sapdbc.jar;E:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_jce_export.jar;E:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;E:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_smime.jar;E:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;E:/usr/sap/J2E/SYS/global/security/lib/tools/w3c_http.jar -showversion -Xmx512m com.sap.inst.jload.Jload -sec J2E,jdbc/pool/J2E,E:\usr\sap\J2E\SYS\global/security/data/SecStore.properties,E:\usr\sap\J2E\SYS\global/security/data/SecStore.key -dataDir
prosvr/sap/J2EE-CD\J2EE-ENG/JDMP -job "C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/IMPORT.XML" -log "C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/jload.log"" finished with return code 1. Output:
java version "1.5.0_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_03-b07)
Java HotSpot(TM) Client VM (build 1.5.0_03-b07, mixed mode, sharing)
Feb 23, 2006 3:18:42 PM com.sap.inst.jload.Jload main
INFO: Jload -sec J2E,jdbc/pool/J2E,E:\usr\sap\J2E\SYS\global/security/data/SecStore.properties,E:\usr\sap\J2E\SYS\global/security/data/SecStore.key -dataDir
prosvr/sap/J2EE-CD\J2EE-ENG/JDMP -job C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/IMPORT.XML -log C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/jload.log
Feb 23, 2006 3:18:43 PM com.sap.inst.jload.db.DBConnection connectViaSecureStore
INFO: connected to J2E on jdbc/pool/J2E
Feb 23, 2006 3:18:43 PM com.sap.inst.jload.JobStatus readStatus
INFO: commencing restart
Feb 23, 2006 3:18:44 PM com.sap.inst.jload.Jload dbImport
INFO: trying to delete from table J2EE_CONFIGENTRY
Feb 23, 2006 3:18:44 PM com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIGENTRY deleted
Feb 23, 2006 3:18:44 PM com.sap.inst.jload.Jload dbImport
SEVERE: DB Error during import of J2EE_CONFIGENTRY
Feb 23, 2006 3:18:44 PM com.sap.inst.jload.Jload printSQLException
SEVERE: Message: [-3018] (at 83): Invalid numeric parameter
Feb 23, 2006 3:18:44 PM com.sap.inst.jload.Jload printSQLException
SEVERE: SQLState: I3018
Feb 23, 2006 3:18:44 PM com.sap.inst.jload.Jload printSQLException
SEVERE: ErrorCode: -3018
Feb 23, 2006 3:18:44 PM com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
ERROR 2006-02-23 15:48:44
CJSlibModule::writeError_impl()
CJS-20065 Execution of JLoad tool 'E:\Program Files\Java\jdk1.5.0_03\bin\java.exe -classpath ./sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;e:\sapdb\programs\runtime\jar\sapdbc.jar;E:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_jce_export.jar;E:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;E:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_smime.jar;E:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;E:/usr/sap/J2E/SYS/global/security/lib/tools/w3c_http.jar -showversion -Xmx512m com.sap.inst.jload.Jload -sec J2E,jdbc/pool/J2E,E:\usr\sap\J2E\SYS\global/security/data/SecStore.properties,E:\usr\sap\J2E\SYS\global/security/data/SecStore.key -dataDir
prosvr/sap/J2EE-CD\J2EE-ENG/JDMP -job "C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/IMPORT.XML" -log "C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/jload.log"' aborts with returncode 1. Check 'C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/jload.log' and 'C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/jload.java.log' for more information.Hi,
JDK 1.5 is not supported for NW installs. 1.4.2_10 is supported, but 1.4.2_08 is recommended. You can download the older JDK from the Sun website.
If you still have problems with the older JDK, post the contents of your jload.java.log for us to view.
Cheers,
Jonathan -
Has anyone had success implementing CTS Plus for Xi 3.0? The documentation says the loose coupling is possible as long as the TMS doman is on a NW 700 system.
When I was configuring "Activate Deployment Service" (page 35 of How to Guide) I get the message that the command TMS_CFG_CHECK_DEPLOY_USER is an unknown function.
DirkHi,
>>Is CTS+ is compatible
Configuration setup for release SAP Netweaver 7.0 SPS12 or higher / SAP Netweaver 2004 SPS14 and higher
Regards
Agasthuri Doss -
Test exams for certification in BI NetWeaver 2004s
Hi there,
I am about to take the certification exam in BI Netweaver 2004s ( BW 7.0 ), and I wonder if there excists some test exams that I can look at, to see what to expect?
Regards,
Silje Sundehi...
To prepare for the exam, you need to read the 2004s documentation and on-line documentation.
You also need to prepare for the Intergrated Planning section - this is harder to do, but there is documentation on the new functionality.
Hope this helps:
https://websmp108.sap-ag.de/~sapidp/011000358700003512362006E
Check the deatils for the certification at the below link
https://websmp105.sap-ag.de/~sapidp/011000358700002412512003
check out this link for some more documentation available for the BI Certification
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=bi+certification&adv=true&adv_sdn_all_sdn_author_name=&sortby=cm_rnd_rankvalue
https://www.sdn.sap.com/irj/sdn/developerareas/bi
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a
BI7.0(sap netweaver 2004s) pls check the below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
NW2004s help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/index.htm -> SELECT key capability
http://help.sap.com/saphelp_nw2004s/helpdata/en/30/c4461ff69d5a438f1286e344b545fa/frameset.htm then select-> information integration -> business intelligence.
For Modeling in Netweaver BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
To know the New Features in BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd64196ec6b
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
Also check these links as well:
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken]
BI Data Modeling and Frontend Design [original link is broken]
For Netweaver Security & Authorizations:
http://help.sap.com/saphelp_nw2004s/helpdata/en/8c/2ec59131d7f84ea514a67d628925a9/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39f29890-0201-0010-1197-f0ed3a0d279f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fda2a990-0201-0010-5497-b81b1556df24
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/adeac294-0501-0010-5a97-9ac5d562b1be
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken]
http://help.sap.com/bp_biv170/
and more starting from here:
https://www.sdn.sap.com/irj/sdn/developerareas/bi
In this one - check out slides 28-34
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd64196ec6b
Check this link to get PDF doc on SAP BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
Here is a powerpoint overview with illustrations of the differences between NW2004s (BI 7.0) and BW 3.5.x
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
check the presentaion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt
Web Blogs & Threads in SDN
/message/502929#502929 [original link is broken]
/people/sap.user72/blog/2006/01/27/sap-netweaver-bi-versus-sap-bw-the-sequel
New Features in BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
BI 7.0 reporting features
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
Some of the How to Papers available at these links
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/93eaff2d-0a01-0010-d7b4-84ac0438dacc [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/9280fb2d-0a01-0010-0f80-f33ab5c1606d [original link is broken]
Frequently Asked Questions in SAP NW 7.0 - Enterprise Data Warehousing, Reporting, Query & Analysis and Business Planning [original link is broken]
hope this helps... -
Netweaver 2004s ABAP or JAVA?
I downloaded the 2004s preview with ABAP app server, but noticed two other distributions. One was full Java and the other express Java.
In the Java distributions, is there still an ABAP development environment? Or are the distributions with J2EE using Java instead of ABAP?
Sorry if this question is too "green".
Thanks,
TimHi Smith,
I dont think we have the ABAP development enviornment in the JAVA distributions provided.
The links below will give you fairly a good idea about SAP NetWeaver 2004s:
http://help.sap.com/saphelp_nw04s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
/people/sap.user72/blog/2006/02/11/sap-netweaver-2004s--where-is-it-really-documented
and as i just saw the previous reply to your post which said that the sneak preview is with both java and abap stack.i have a small info for you regarding the same.
SDN recently released 2 Sneak Preview products:
- SAP NetWeaver 04 SP15 Full Java Edition
- SAP NetWeaver 04s Full ABAP Edition (with Web Dynpro for ABAP)
for XI we need both the Java and the Abap stack and not just having them individually because of which you cannot use it for XI.That is, the Sneak Preview products contain either the JAVA or the ABAP stack but not both together.
The link below i guess will also help you learn more about the Sneak Preview products:
http://www.howforge.com/news/sneap-preview-sap-netweaver-04-sp15-java-abap
I hope I have answered your query.
Regards,
Abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS. -
Installation Error (Netweaver 2004s ABAP Trial)
Hi all!
I can't install the ABAP trial version of NetWeaver 2004's. Every time the installation stops at 30-40%. Before each installation i am running the regclean Tool, because i've read in one thread that this error could be caused by registry entries of a previous installation. But after that the error still appears. If someone can help me on that, i will be glad.
My operation system is Windows XP (Media Center Edition / Version 2002) SP2 and i've configured a MS Loopback Adapter.
Here's what the log.txt says:
(Apr 28, 2007 5:13:47 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Apr 28, 2007 5:13:47 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/ich/LOKALE1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/ich/LOKALE1/Temp/MaxDBSAPNWPREV.log")
Here's what the MaxDBSAPNWPREV.log (a cutout) says:
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: starting installation phase of package SQLDBC 76 7.6.00.36 32 bit
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: -
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst:
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SQLDBC76.TGZ"
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 pgm/
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: -rwxr-xr-x 1073152 2006-11-21 00:02:25 pgm/libSQLDBC76.dll
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/sqldbc/
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/sqldbc/lib/
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 80738 2006-11-21 00:02:25 sdk/sqldbc/lib/libSQLDBC76.lib
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 symbols/
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 3951616 2006-11-21 00:02:25 symbols/libSQLDBC76.pdb
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: checking unpacked archive... ok
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: installation of MaxDB Software finished successfully Sa, Apr 28, 2007 at 17:13:46
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: creating database NSP...
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: ERROR: Backup check for 'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: installation exited abnormally at Sa, Apr 28, 2007 at 17:13:46
Sat Apr 28 17:13:47 CEST 2007 MaxDB: Error during call to sdbinst, rc= 1
Sat Apr 28 17:13:47 CEST 2007 MaxDB: Done with call_sdbinst
Sat Apr 28 17:13:47 CEST 2007 MaxDB: rc of sdbinst = 1
Sat Apr 28 17:13:48 CEST 2007 MaxDB: Start of CallSdbuninst
Sat Apr 28 17:13:48 CEST 2007 MaxDB: IndepProgPath: c:/sapdb/programs
Sat Apr 28 17:13:48 CEST 2007 MaxDB: dbmcli path: c:/sapdb/programs/pgm/dbmcli.exe
Sat Apr 28 17:13:48 CEST 2007 MaxDB: Calling check for db_enum in case of an abort
Sat Apr 28 17:13:48 CEST 2007 MaxDB: nsp doesn't exist. Nothing to do !
Sat Apr 28 17:13:48 CEST 2007 MaxDB: rc of Method: 3
Sat Apr 28 17:13:48 CEST 2007 MaxDB: IndepProgPath = c:/sapdb/programs
MaxDB: dbmcli_path = c:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :NSP:
MaxDB: Instroot of NSP is: null
MaxDB: sdbuninst_option = :3
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Sat Apr 28 17:13:48 CEST 2007 MaxDB: End of CallSdbuninst
Sat Apr 28 17:13:48 CEST 2007 MaxDB: End of uninstallation
ThanksHello all
a.) my hard disk is of type NTFS
b.) Second: this is the error log:
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst: starting preparing phase of package SQLDBC 76 7.6.00.36 32 bit
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst: -
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst:
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst: same package already installed
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: checking consistence of package data in install registry...
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: check files... ok
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: skipping package
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: installation of MaxDB Software finished successfully Tu, May 29, 2007 at 21:21:06
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: creating database NSP...
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: ERROR: Backup check for 'C:sapdbNSP\_tempLocationloadload_datasave' failed:
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: File not found: C:sapdbNSP\_tempLocationloadload_datasave
Therefore it seems to be exactly the same as mentioned in this Thread
c.) Before I installed the ABAP trial Netweaver SP11 version I used the SP8 version sucessfully which has been available since I believe December using the same hard ware equipment. I was able to install the former version (with same problems) on the same hard disk using the same operating system (by the way Windows XP SP2)
d.) Somebody asked there to find the downloads: general take a look at
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
e.) I have "surfed" a little bit in the internet and it seems to be that this error is well known but the solution proposed (matter of size of hard disk drive or matter of fact of size of memory installed) seems to be incorrect
The some problem has been discribed here:
http://www.sapfans.com/forums/viewtopic.php?=&p=791329
http://www.mundosap.com/foro/printthread.php?t=5177&page=2&pp=10
NW2004s ABAP Trial Version error code = 601
Up to know I found no suitable solution to get rid of the problem as I have really (in my opinion) a suitable hardware (big hard disk; 1 GB RAM etc.)
Christoph
PS: I am still a novice in using the techniques in the threads (questioning; giving points; replaying etc.) used herein. So sorry for that If my usage might be incorrect or not perfect or.. . -
Query Designer on Netweaver 2004s ABAP Sneak Preview
Hello Folks,
I have installed the ABAP sneakpreview, and have activated the BW on client 001.
Most things work well, but i am having problems with starting the Query Designer. I logon to the query designer, but nothing starts up.
In SM50 i see a lot of frontend objects being activated, but after this i do not see the Query Designer coming up. Does anyone have a clue.
Thanks & Best Regards,
Dabre
Message was edited by: DabreHi Dabre,
To work with BI 7 Query designer you have to downlaod latest patches of SAPGUI. Also you need to have MS OFFICE 2003 and .NEt framework installed.
Also check the blog to active your Bex settings in BI 7.
/people/prakash.darji/blog/2006/07/26/troubleshoot-the-sap-netweaver-2004s-bi-frontend-installation
Cheers
Praveen
Maybe you are looking for
-
After doing the network reset on my iphone 4, the top left corner of the screen which usually displays my carriers name just keeps saying 'searching'. I have tried looking elsewhere at this site for a solution to my problems but I'm still coming up e
-
Install abap + java stack with PI and MDM trail versions
Hi I would like to install NetWeaver 7.01 sp3 trail version in my laptop which has HD 320GB with 4GB RAM. Also I want to install MDM in the same laptop. Is it possible? Will PI comes with ABAP + jAVA stacks? Which OS is the right platform for doing t
-
For most file types (exe, zip, pdf, doc, xls, etc.) the option to "do this automatically from now on" is greyed out, and for the few types of files where I can check the box, a bug prevents it from working. Similarly, Firefox cannot seem to handle *n
-
Hi, I am trying to solve some issues and strange behaviour with an important workflow hooked up with an InfoPath 2010 list in SharePoint 2010. Everything worked fine until now. One workflow item has ended prematurely with the workflow history message
-
Purchase Requisitions from APO to R3
Hi, when iam transferring purchase requisitions from APO to R3, other snp orders are also automatically tranferring to R3 . How to prevent this? Thanks, Dhanush